Hi all,
My ASP application is running fast in SQL Server 2000. But when we shifted it to SQL Server 2005, it becomes very slow.
I have created the indexes also. There is lot of data in the tables.
Is there any option to build the indexes for previous data.
Please help....
-Shah.
We have an extensive stress test for our OLTP application.that runs slower after upgrading to SQL Server 2005.
We have done the following:
- applied SP1 and SP2
- updated statistics (sp_updatestats)
- recompiled all stored procedures
Some behavior we notice in Perfmon over the course of the 1-hour test is:
- Average CPU Utilization is up from 22% to 32% and we're trying to figure out why
- Compilations per second are up from 200 to 250
- Recompilations per second are down from 5 to 1 (which is good).
- Memory utilization is identical.
- We see exagerated spikes in response times. The general performance
seems pretty good - but there are periodic spikes that hurt our averages.
- I examined perfmon for waits and nothing jumped out.
- A small handful of application workflows are much slower, while most are roughly identical.
I realize there could be a zillion different causes. But if anyone has experience upgrading a large OLTP solution which uses a mixture of dynamic SQL and stored procedures to SS2005 - and tuning the upgraded database - please offer any suggestions.
Our current plan includes (a) running the Best Practices analyzer which already uncovered a trace flag we may want to use since we're running on an 8-way, (b) rebuilding indexes, and (c) examine a SQL Trace this time around too since it appears the slowness is isolated to certain application workflows.
Please offer any suggestions that have worked for your team.
Thanks so much!
Mike
PS I will post all the things we end up doing in the end once we get performance equal or better - hopefully the latter!!!
I am begginner at best so I hope someone that is better can help.I have a stored procedure that updates a view that I wrote using 2cursors.(Kind of a Inner Loop) I wrote it this way Because I couldn'tdo it using reqular transact SQL.The problem is that this procedure is taking longer and longer to run.Up to 5 hours now! It is anaylizing about 30,000 records. I thinkpartly because we add new records every month.The procedure works like this.The first Cursor stores a unique account and duedate combination fromthe view.It then finds all the accts in the view that have that account duedatecombo and loads them into Cursor 2 this groups them together for datamanipulation. The accounts have to be grouped this way because aaccount can have different due dates and multiple records within eachaccount due date combo and they need to be looked at this way aslittle singular groups.Here is my procedure I hope someone can shead some light on this. Myboss is giving me heck about it. (I think he thinks Girls cant code!)I got this far I hope someone can help me optimize it further.CREATE PROCEDURE dbo.sp_PromiseStatusASBEGINSET NOCOUNT ON/* Global variables */DECLARE @tot_pay moneyDECLARE @rec_upd VARCHAR(1)DECLARE @todays_date varchar(12)DECLARE @mActivityDate2_temp datetimeDECLARE @tot_paydate datetime/* variables for cursor ACT_CUR1*/DECLARE @mAcct_Num1 BIGINTDECLARE @mDueDate1 datetime/* variables for ACT_CUR2 */DECLARE @mAcct_Num2 BIGINTDECLARE @mActivity_Date2 datetimeDECLARE @mPromise_Amt_1 moneyDECLARE @mPromise_Status varchar(3)DECLARE @mCurrent_Due_Amt moneyDECLARE @mDPD intDECLARE @mPromise_Date datetimeSELECT @todays_date =''+CAST(DATEPART(mm,getdate()) AS varchar(2))+'/'+CAST(DATEPART(dd,getdate()) AS varchar(2))+'/'+CAST(DATEPART(yyyy,getdate()) AS varchar(4))+''DECLARE ACT_CUR1 CURSOR FORSELECT DISTINCTA.ACCT_NUM,A.DUE_DATEFROM VWAPPLICABLEPROMISEACTIVITYRECORDS AOPEN ACT_CUR1FETCH NEXT FROM ACT_CUR1 INTO @mAcct_Num1 , @mDueDate1WHILE (@@FETCH_STATUS = 0)BEGINSELECT @rec_upd = 'N 'DECLARE ACT_CUR2 CURSOR FORSELECTB.ACCT_NUM,B.ACTIVITY_DATE,B.PROMISE_AMT_1,B.PROMISE_STATUS,B.CURRENT_DUE_AMT,B.DAYS_DELINQUENT_NUM,B.PROMISE_DATE_1FROM VWAPPLICABLEPROMISEACTIVITYRECORDS B (UPDLOCK)WHERE B.ACCT_NUM = @mAcct_Num1ANDB.DUE_DATE = @mDueDate1ORDER BY B.ACCT_NUM,B.DUE_DATE,B.ACTIVITY_DATE,CASEB.Time_ObtainedWHEN 0 THEN 0ELSE 1END Desc, B.Time_ObtainedOPEN ACT_CUR2FETCH NEXT FROM ACT_CUR2INTO @mAcct_Num2 ,@mActivity_Date2,@mPromise_Amt_1,@mPromise_Status ,@mCurrent_Due_Amt,@mDPD,@mPromise_DateWHILE (@@FETCH_STATUS = 0)BEGIN----CHECK------------------------------------------------------------------------DECLARE @PrintVariable2 VARCHAR (8000)--SELECT @PrintVariable2 = CAST(@MACCT_NUM2 AS VARCHAR)+''+CAST(@MACTIVITY_DATE2 AS VARCHAR)+' '+CAST(@MPROMISE_AMT_1 ASVARCHAR)+' '+CAST(@MPROMISE_STATUS AS VARCHAR)+''+CAST(@mCurrent_Due_Amt AS VARCHAR)+' '+CAST(@mDPD AS VARCHAR)+''+CAST(@mPromise_Date AS VARCHAR)--PRINT @PrintVariable2----ENDCHECK------------------------------------------------------------IF @mDPD >= 30BEGINSELECT @tot_pay = SUM(CONVERT(FLOAT, C.PAY_AMT))FROM vwAplicablePayments CWHERE C.ACCT_NUM = @mAcct_Num2ANDC.ACTIVITY_DATE >= @mActivity_Date2ANDC.ACTIVITY_DATE < @mActivity_Date2 + 15----CHECK------------------------------------------------------------------------DECLARE @PrintVariable3 VARCHAR (8000)--SELECT @PrintVariable3 ='Greater=30 DOLLARS COLLECTED'--PRINT @PrintVariable3----ENDCHECK------------------------------------------------------------ENDELSE IF @mDPD < 30BEGINSELECT @tot_pay = SUM(CONVERT(FLOAT, C.PAY_AMT))FROM vwAplicablePayments CWHERE C.ACCT_NUM = @mAcct_Num2ANDC.ACTIVITY_DATE >= @mActivity_Date2ANDC.ACTIVITY_DATE BETWEEN @mActivity_Date2 AND@mPromise_Date + 5----CHECK----------------------------------------------------------------------DECLARE @PrintVariable4 VARCHAR (8000)--SELECT @PrintVariable4 ='Less 30 DOLLARS COLLECTED'--PRINT @PrintVariable4----END CHECK------------------------------------------------------------END----------------------------------------MY REVISEDLOGIC-------------------------------------------------------IF @rec_upd = 'N'BEGINIF @mDPD >= 30BEGINSELECT @mActivityDate2_temp = @mActivity_Date2 + 15--DECLARE @PrintVariable5 VARCHAR (8000)--SELECT @PrintVariable5 =' GREATER= 30 USING ACTVITY_DATE+15'--PRINT @PrintVariable5ENDELSE IF @mDPD < 30BEGINSELECT @mActivityDate2_temp = @mPromise_Date + 5--DECLARE @PrintVariable6 VARCHAR (8000)--SELECT @PrintVariable6 =' LESS 30 USING PROMISE_DATE+5'--PRINT @PrintVariable6ENDIF @tot_pay >= 0.9 * @mCurrent_Due_Amt--used to be promise amtBEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET PROMISE_STATUS = 'PK',TOTAL_DOLLARS_COLL = @tot_payWHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto PK.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDSELECT @rec_upd = 'Y 'ENDIF ((@tot_pay < 0.9 * @mCurrent_Due_Amt) OR @tot_pay IS NULL)AND( @mActivityDate2_temp > @todays_date )--need to put 1dayof month here for snapshot9/01/2004BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'OP'WHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto OP which is the original Activity Date.--The record will hold this date until it goes into PK,PB,orIP.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @mActivity_Date2WHERE CURRENT OF ACT_CUR2ENDENDELSE IF ((@tot_pay < 0.9 * @mCurrent_Due_Amt) OR @tot_pay ISNULL)AND( @mActivityDate2_temp <= @todays_date )--need to put 1dayof month here for snapshot 9/01/2004BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'PB',TOTAL_DOLLARS_COLL = case when @tot_pay is nullthen 0 else @tot_pay endWHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto PB.IF @mPromise_Status IN ('PTP','OP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDENDENDELSE IF @rec_upd = 'Y'BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSETPROMISE_STATUS = 'IP',TOTAL_DOLLARS_COLL = 0WHERE CURRENT OF ACT_CUR2--This statement updates the time that the status was placedinto IP.IF @mPromise_Status NOT IN ('IP')BEGINUPDATE VWAPPLICABLEPROMISEACTIVITYRECORDSSET Status_Date = @todays_dateWHERE CURRENT OF ACT_CUR2ENDENDFETCH NEXT FROM ACT_CUR2 INTO @mAcct_Num2,@mActivity_Date2,@mPromise_Amt_1,@mPromise_Status ,@mCurrent_Due_Amt,@mDPD,@mPromise_DateENDCLOSE ACT_CUR2DEALLOCATE ACT_CUR2FETCH NEXT FROM ACT_CUR1 INTO @mAcct_Num1 , @mDueDate1ENDCLOSE ACT_CUR1DEALLOCATE ACT_CUR1SET NOCOUNT OFFENDGO
View 15 Replies View Relatedhi, friends, please look at this:
I have a SSIS package, and inside it I do something like below:
1. I have a SQL component, to give back a object to store the records.
2. I have a VB script component, I direct the object I got in 1 step into the script as a dataset.
My problem is:
I run the package in the SQL SERVER 2005 Store Procedue like this:
do
dtexec.exe package.dtsx
loop untill i>t
I control the it runs 30 times. But I found that the speed is slower and slower.
the first time, it takes about 600 s, but the last time, it takes the 1800 s.
Why?
The package don't drop the object it create during the loop in the Store Procedue ?
Thanks!
Hi there,
I am an application programmer who uses SQL Server; I'm not an expert and just know the basics. Our application has approximately 300 SQL tables and each table has just one primary index. We don't have stored procedures and only have 3 Views that a couple of reports use. Our database is approximately 26GB in size. We are planning on migrating from SQL 2000/Windows Server 2000 to SQL 2005/Windows Server 2003. Before doing this I decided to do some bench mark testing. I chose a simple SELECT statement on one of our larger tables. On SQL 2000 it ran in 22 seconds whereas on SQL 2005 it ran in 34 seconds.
These are the steps I have done to try and improve performance, all to no avail.
I tried both a passive and active upgrade and the results were the same. The passive way was to remove 2000, install 2005, create a new database and restore from a 2000 backup into the new 2005 database. The active way was to leave 2000 on the server with the database attached and upgrading to 2005.
I did not change any defaults on the database except I have set the compatibility level to SQL 2005.
The collation is set to SQL_Latin1_General_CP1_CS_AS.
I have run an Optimize Index Task.
I have run a Rebuild Index Task.
I have run an Update Statistics Task.
I have defragged the drive that the database resides on.
Can anyone explain why SQL 2003 is dramatically slower than 2000? Any help would be greatly appreciated.
Hi there,
I am an application programmer who uses SQL Server; I'm not an expert and just know the basics. Our application has approximately 300 SQL tables and each table has just one primary index. We don't have stored procedures and only have 3 Views that a couple of reports use. Our database is approximately 26GB in size. We are planning on migrating from SQL 2000/Windows Server 2000 to SQL 2005/Windows Server 2003. Before doing this I decided to do some bench mark testing. I chose a simple SELECT statement on one of our larger tables. On SQL 2000 it ran in 22 seconds whereas on SQL 2005 it ran in 34 seconds.
These are the steps I have done to try and improve performance, all to no avail.
I tried both a passive and active upgrade and the results were the same. The passive way was to remove 2000, install 2005, create a new database and restore from a 2000 backup into the new 2005 database. The active way was to leave 2000 on the server with the database attached and upgrading to 2005.
I did not change any defaults on the database except I have set the compatibility level to SQL 2005.
The collation is set to SQL_Latin1_General_CP1_CS_AS.
I have run an Optimize Index Task.
I have run a Rebuild Index Task.
I have run an Update Statistics Task.
I have defragged the drive that the database resides on.
Can anyone explain why SQL 2003 is dramatically slower than 2000?
Any help would be greatly appreciated.
Hi there,
I am an application programmer who uses SQL Server; I'm not an expert and just know the basics. Our application has approximately 300 SQL tables and each table has just one primary index. We don't have stored procedures and only have 3 Views that a couple of reports use. Our database is approximately 26GB in size. We are planning on migrating from SQL 2000/Windows Server 2000 to SQL 2005/Windows Server 2003. Before doing this I decided to do some bench mark testing. I chose a simple SELECT statement on one of our larger tables. On SQL 2000 it ran in 22 seconds whereas on SQL 2005 it ran in 34 seconds.
These are the steps I have done to try and improve performance, all to no avail.
I tried both a passive and active upgrade and the results were the same. The passive way was to remove 2000, install 2005, create a new database and restore from a 2000 backup into the new 2005 database. The active way was to leave 2000 on the server with the database attached and upgrading to 2005.
I did not change any defaults on the database except I have set the compatibility level to SQL 2005.
The collation is set to SQL_Latin1_General_CP1_CS_AS.
I have run an Optimize Index Task.
I have run a Rebuild Index Task.
I have run an Update Statistics Task.
I have defragged the drive that the database resides on.
Can anyone explain why SQL 2003 is dramatically slower than 2000? Any help would be greatly appreciated.
I'm working on upgrading VB6-based application to employ SQL Server 2005 Express (it currently uses MSDE). I'm using the following connection string -
Provider=SQLNCLI;Persist Security Info=False;User ID=my_user;Password=my_password;Initial Catalog=my_database;Data Source=my_pc;Packet Size=8000
The application runs exceedingly slow. As soon as I uninstall SQL Server 2005 Express edition and install SQL Server 2005 Developers edition speed increases in 5 to 10 times. Once I uninstall SQL Server 2005 Developers edition and install SQL Server 2005 Express edition the application's speed drops again.
I have repeated this "cycle" several times: install express -> running slow -> removed express, installed developers -> running fast -> removed developers, installed express -> running slow -> removed express, installed developers -> running fast, etc. etc. etc.
Some SQL2005-related articles I read stated that Express edition equals in performance to other editions. This turns out to be untrue.
Anybody please suggest any explanation to this misfortune.
Thank you.
Eugene
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005.
When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors.
ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error.
"Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect.
Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems.
I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me
All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial.
I am trying to run this sync on my home pc so there should be no issues with any user permissions
I have IIS installed
I did NOT have SQL Server Agent running in management studio at this time
I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider
I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem.
AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters
int returnValue = this.Adapter.Fill(dataTable);
I am not sure why the errors changed on me after starting SQL Server Agent.
What can I do to fix this connection problem?
Thank you so much for your help!
Irina
I am having a strange problem. I have an application that to connects to SQL Database in SQL Server 2005.
When I run the application with Visual Studio everything works fine but when I deploy the application on my web server and then to access the site .
I get an error : Login failed for user ''. The user is not associated with a trusted SQL Server connection.
For some reason the application is not passing the user name . I have checked the IIS and authentication is set to Integrated Windows Authentication .
My connection string is correct as well
<add name="xxxxx" connectionString="Data Source=xxxxxx;Initial Catalog=xxxx;Integrated Security=SSPI" providerName="System.Data.SqlClient"/>
I will appreciate any kind of assistance in this matter. Thanks
I am trying to call a view that is already in SQL Server 2005 from my ASP.NET 2.0 application. I get the following error message:
The request for procedure 'vwMyView failed because 'vwMyView' is a view object.
I thought I could call a view the same way that I call a stored procedure but I guess I was wrong. How can I fix this?
Here is some sample code too:
Dim Results As DataSetDim Cmd As IDbCommand
Dim Adapter As IDbDataAdapter Results = New DataSet
Cmd = DB.CreateCommandCmd.CommandText = "vwMyView"
Cmd.CommandType = CommandType.StoredProcedure
Adapter = DataSource.CreateDataAdapter
Adapter.SelectCommand = Cmd
DB.Open()
Cmd.Connection = DB
Adapter.Fill(Results)
Cmd.Dispose()
DB.Close()
Return Results
Hi
I can't connect to sql server 2005 from my asp.net web page. I seem to be able to connect to it when i run the application from within visual studio but i can't connect to it when i run the application from IIS.I am new to sql server 2005 express so please bear with me.The error message i get is: Cannot open database "Vets" requested by the login. The login failed.Login failed for user 'OSCAR2K4ASPNET'.I don't know where this user OSCAR2K4ASPNET came from but i looked in sql server 2005 and there he is. In the left hand pane I went to Security and then logins and found oscar2k4asp.net there. I went to the properties for this user and went to User Mappings. There was no tick next to my Vets database so I added one and ran the application from IIS. I also added the user to every single role in the vets database (including dbowner). I also went into the vets database itself and found the oscar/aspnet user and made sure he was added to every role.
I ran the application again. This time i got a lots of different errors. If the page was trying to run a select procedure I got the error user does not have select permission. If the page was running an SP i got the error or user does not execute permission
I have never had this problem before so I don't understand.Where did this user come from? Was he created automatically when i configured my database for membership and roles? How do i set up this user so he can access the databsae from IIS.
The only way I could get the application to run from IIS was to go to Security - Logins for sql server and add the oscar2k4asp.net user to the sysadmin role.
I find this very strange. Naturally i don't want to leave oscar2k4 in sysadmin.
Please help :) I can't upload my website until i fix this
Thanks, andrea
I have got a VB6 application where I update local SQL server table from MS Access table with code like that:
----------------------------------------------------------------------------------------------------------------
Dim rst As ADODB.Recordset
Set rst = New ADODB.Recordset
rst.Open "SELECT * FROM Table1 WHERE [Fld1]=" & v1, Cn, adOpenKeyset, adLockOptimistic
'check if exist if not exist create new
If rst.EOF Then
rst.AddNew
rst("Fld1") = v1
rst("Fld2") = v2
rst.Update
End If
rst.Close
----------------------------------------------------------------------------------------------------------------
On rst.Update I have got an error message that the server has to be added to syservers as linked with stored procedure sp_addlinked srever. Why?
Anyhow I executed the stored procedure then I've got error message 16933, "The cursor does not include the table being modified or the table is not updatable through the cursor."
I had to rewrite the code to "INSERT INTO (Fld1, Fld2..." and it works.
Is something wrong in SQL Server 2005 installation or any other reason?
Please help.
I don't know why my application on the internet try to access the SQL Server 2005, when the host still having the 2000 edition. I put the following connection string:
Data Source=##DBSERVER##;Initial Catalog=##DBNAME##;User ID=##DBUSER##;Password=##DBPASSWORD##;
Isn’t everything fine with that? I created the table by host but dosen’t work. I’m wondering if can I conect straight with Data Base, without register in the server, like with mdb?
This is the error that I’m getting.
When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hi,
I am developing a windows application that needs to communicate with a remote SQL server 2005 database. Server allows remote connections and MSDTC service also running. Do I need to run MSDTC service on the client machine where I use desktop application ? any ideas ? It's throwing some error like
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
But my SQL Server allows remote connection, and I am able to do a select statement.
But when I insert/update anything, it's throwing this error. I guess some problem with MSDCT. Anybody have any idea ?
All,
I'm a newbie here so forgive me if I have missed something completely obvious.
I have bought a shopping cart script of a well known company (Evolve Merchant 5) and I wish to set it up locally on my development server, I created a virtual directory, set the web application up and get the asp pages to display perfectly. However, in the configuration file (global.asa & web.config) for the application it reguests information to be provided: <add key="DBName" value="Database name" />
<add key="DBServer" value="IP address of server" />
<add key="DBUserName" value="User name" />
<add key="DBPassword" value="password" />
<add key="AltPassword" value="password" />
What I can't determine is what the SQL Server 2005's IP address is? the pages of this application show when I type http://localhost/catalogue into IE, so I presumed the server address would be the IP of localhost, when typed ping localhost into command promt it gives me 127.0.0.1, but when I enter this into the config file and try to load the application it just hangs and then eventually says:
"Microsoft OLE DB Provider for ODBC Drivers (0x80004005)[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied./catalogue/global.asa, line 54"
I have created a new database in SQL Express called: merchant509 and restored the tables to it as the manufactures help files state, I created a new login called shop which uses SQl authentication, so as I can provide a password. So the settings should look like this:
<add key="DBName" value="Database name" />
<add key="DBServer" value="127.0.0.1" />
<add key="DBUserName" value="shop" />
<add key="DBPassword" value="1684" />
<add key="AltPassword" value="1684" />
But it doesn't work, does anyone know what i have done wrong?? the SQL server is runnign on the same computer as I am trying to access it from, it is set to accept all forms of comunication i.e. TCP/IP etc.. in the server configuration manager the IP address part of TCP/IP in protocols shows IP1 as 192.168.2.2 active yes enabled yes, and IP2 as 127.0.0.1 active yes and enables yes, I have tried the 192.168.2.2 and this gives the same errors, this is my registed IP on my home network.
I'm now stumped, I haven't a clue what else I can try, I would be very greatfull if anyone has any ideas.
Regards,
Daniel Coates
Hi there,
I have a question which I put the company that host my website but I didnt get a conclusive answer. Maybe someone here will be able to advise or help me with my situation.
I want to build a database that I will run on my local server and the front end of this will be run using a windows application. I have a website which I run the database on the remote server. What I would like to do is to be able to synchronize certain tables between the two databases (such as updating products table, or orders table). I am using sql server 2005 and I am using the sql server management studio to access my database on the remote server. I did notice there is a synchronzie button. I also came across some 3rd party tools. Not sure if that is the way to go.
If anyone as done this before or can give me any suggestions, I would be delighted.
Thanks
Anthony
Hi all.
I have developed a VB6 program which will activate an Application Role to UPDATE and INSERT some tables in SQL Server 2005.
My program will login with a username, say USER and then run with the rights of the Application Role which will SELECT, UPDATE and INSERT the following tables:
1) Table A
2) Table B
3) Table C
The USER login is a restricted user which has only SELECT permission to Table A, B and C.
I encounter a problem in which my program can only UPDATE table B and table C but Table A. I have double checked the settings of Table A, Table B and Table C. Theirs are all same. Fyi, the column which can't be updated is of type "datetime".
Once i grant USER login UPDATE permission to Table A, my program works perfectly in which it can UPDATE all the tables including Table A.
I have tried for almost 2 days but am still clueless. Any ideas?
Thank you so much.
I have a C# program that access SQL Server 2005. The program have 4 threads that performs the same method and are used only to improve performance of the system
The C# accesses the SQL Server using OleDbConnection and
OleDbCommand classes. Sometimes (very rare) I get exception to method ExecuteNonQuery() with message: "Table does not exist.".
The command text for the query is a constant string in the format: "insert into my_table€¦".
Can any one tell me what could be the problem?
Hi every body
I'm developing a web application and i like to use the sql server 2005 role management features istead of developing a role management package in my program, I can do it on my tables and othe database items but I have no idea about using database access rights in my web pages to permit some one viewing or updating a web form... Is there any system table or system stored procedure showing access rights in my data base? or is there another idea to do this??
by Thanks
Javaneh
Hi,
We recently installed Sql 2005 server and it was working fine. But today one of our user reported that they could not able to connect the sql server 2005 from the application. When I checked the error log, I found the following error for every one minute. We restarted the sql service on this sql 2005 instance but still we are getting the same error.
SSPI handshake failed with error code 0x80090311 while establishing a connection with integrated security; the connection has been closed.
Could any one help us on that?
Regards,
Sankar
Hi,
Where do I ask questions about creating SQL Server 2005 triggers? I want to create a field in a SQl server 2005 database based on a combination of four (4) fields in one table, and then have the data updated in a field in the same table, as well as output to the asp.net web form.
Any guidance appreciated.
Thanks.
I have several general questions about this but I thought I would describe what I am doing first. My senior project team is developing a web application that will wind up using SQL Server for the database. We are writing it in ASP.net and developing the database on SQL Server Express. My job is to develop and deploy the database. I have an ERD designed and am getting ready to start coding the tables, constraints and stored proceedures but am unsure of a couple of things.
1) How do I create a new schema?
2) I can see how to create tables in the GUI but what I am trying to do is create scripts that can be used to create the tables and objects on the actual server that our client will be using. How do I create scripts in 2005 Express? Do I just go click on the new query button?
3) Are scripts that work for Express going to have any problem executing on SQL Server?
Hello,
I have to do an impact analysis for migrating a .Net web based application. The current and desired scenarios are mentioned below.
The current environment:
OS - Windows 2000, SP4
Framework - .Net 1.1
SQL Server - MSSQL Server 2000
Desired Environment:
OS - Windows 2003, SP1 / Windows 2003 R2
Framework - .Net 1.1
SQL Server - MSSQL Server 2005
Please let me know
1. If any changes need to be done in the application when migrating the database from 2000 to 2005?
2. Any relevant document which will help me in the same.
Regards, Venkat
I'm sorry to bother you.
Now I'm trying to run PHP web application on x64 2003 Server with Microsoft SQL Server 2005. The version of PHP is 5.2.3. and the web application should be run as 64bit applications. Since there seems no way to use php_mssql.dll on the environment, I'm trying to use SQL Server 2005 Driver for PHP but when PHP loads php_sqlsrv.dll, an error has occurd and there's a following message in an error log...
PHP Warning: PHP Startup: Unable to load dynamic library 'c:phpextphp_sqlsrv.dll' - %1 is not a valid Win32 application
From this message, I thought the distributed libraries for Windows would be for a Win32 environment but there seemed no information that says the libraries run on Win32 environment only.
I really appriciate if you help me.
Thank you.
All:
I am writing an Internet/Extranet based (ASP.Net 2.0) web application that uses SQL server 2005 as the database. I am using forms authentication on my web application. I am also storing the connection string to SQL server in my web config file. The conn string is encrypted using DPAPI with entropy. I currently have created a SQL login account on my SQL server for use by the web application. This is the user ID I am using in my conn string. The reason for this is because all persons using the application will NOT have a windows login.
Here is my question: The login I created currently has defaulted to the "dbo" role and therefore has "dbo" rights to the database. I want to setup up this login account so that all it can do is execute stored procedures. I dont want this SQL login to be able to do anything else. In my application I am using stored procedures for ALL data access functions, via a data access layer in my application. Can someone guide me step by step as to how to setup this type of access for this SQL login.
Thanks,
Blue.
I have been programming an application with VC++ 2005 and SQL Server 2005. I have converted an old 16-bit database to 32-bit managed code and SQL server and the application seems to be good. Now I want to deploy the application to another server for testing.
I have installed XP SP2, Windows Installer 3.1, Net framework 2.0 and SQL Server 2005 express to the test server. I have transferred the application with WI 3.1 and the program works well in the test server till the first SQL command. I have made a back up of the database and restored it in the test server. In the test server I can log in the database with Server Management studio and I can read the data there correctly. I have enabled both named pipes and TCP/IP for the database in the test server. With Surface Area Configuration I have enabled Local and Remote Connections Using both TCP/IP and named pipes. I only need Windows authentication at this time.
After all this when I come to the first SQL command in the application on the test server I receive the error message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 €“ Could not open a connection to SQL Server).
My connection string to the database is:
'connection->ConnectionString = "Persist Security Info=False; Integrated Security =SSPI;"
"Data Source=TESTSERVER; Initial Catalog=TESTDATABASE;";'
When I use "Data Source=DevelopmentServer", the application works well on the development server.
Can't understand what is still wrong. Can you possibly have an answer for me?
Hello, Everybody.
Help me please with one problem which I'm facing with while deploying java server application on my computer (this java app is jBilling). I have configured it as it was said in docs, I have added environment variable CLASPATH as Microsoft documentation said. I'm using SQL Server JDBC driver 1.2 by Microsoft. The result is that I find this message in log file:
2007-05-27 17:21:41,906 WARN [org.jboss.resource.connectionmanager.JBossManagedConnectionPool] Throwable while attempting to get a new connection: null
org.jboss.resource.JBossResourceException: Could not create connection; - nested throwable: (org.jboss.resource.JBossResourceException: Failed to register driver for: com.microsoft.jdbc.sqlserver.SQLServerDriver; - nested throwable: (java.lang.ClassNotFoundException: No ClassLoaders found for: com.microsoft.jdbc.sqlserver.SQLServerDriver))
at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.createManagedConnection(LocalManagedConnectionFactory.java:168)
... and so on.
I have copied sqljdbc.jar to lib folder of the server. That's how I specified connection string:
jdbc:microsoftqlserver://localhost:1434;DatabaseName=Billing;integratedSecurity=false;
Can not think out what to do else. Maybe somebody knows what to do about it?
Many thanks
Hi,
I want to show sql server reports in windows application.
i code like this,
ReportViewer1.ProcessingMode= ProcessingMode.Remote
Dim userCredentials as New System.Net.NetworkCredential (€œdomain username€?,€? domain user password€?,€? Domain name€?)
ReportViewer1.ServerReport.ReportServerCredentials.NetworkCredentials= userCredentials
ReportViewer1.ServerReport.ReportPath=€?folder name
eport name€?
ReportViewer1.ServerReport.ReportServerUrl = New Uri (http://servername/reportserver)
ReportViewer1.RefreshReport()
If i don't use network credentials it gives me unauthorized error.
But exactly which credentials should we give for network credentials?
We can not get domain user password at run time right?
Or is any other way without using network credentials?
Regards,
Harshada
Hi,
View 5 Replies View RelatedI have found a lot of info on MS site regarding installing SQL Server 2005 Express as part of an application. I have found these articles to be extremely inaccurate or at best incomplete.
1. The documentation says all I need is the setup.exe from SQLEXP but this is not true.
2. When I do launch setup.exe during my app's install, it fails because setup.exe trys to run the support.msi. Of course this causes failure because my install is also an msi.
So, does anyone know how to install SQLEXPRESS as part of my app's install?
Thanks.
Hi All,
Is there any limitation for setting password to an approle (like it should be 8 character long, should not start with numbers) ?
If so, what are those limitations ?
Does the same is applicable for sp_setapprole which uses the same password ?
please confirm, for both SQL Server 2000 and 2005 versions.
thanks in advance,
Regards,
Kailai
When trying to open the reports server \servername
eports we are getting an error page titled "Server Error in '/Reports' Application." The server has been restarted, and as this is a new deployment, there has been very little access for individuals to make changes.
Any ideas on how to resolve the problem?
Thanks in advace