ASPNETDB.MDF Is Readonly
Nov 29, 2006
I have downloaded and installed ASP.NET Ajax Sample applications from
http://ajax.asp.net/default.aspx?tabid=47&subtabid=471
I am trying to run the AJAX TaskList example under C:ProgramMicrosoft ASP.NETASP.NET AJAX Sample Applicationsv1.0.61025TaskList
First I moved the content of the TaskList folder to a virtual IIS directory, making it possible to debug the website on my local IIS server.
When I run the example I get prompted to Login or register as a new user. When I submit the registration form I receive the following error message:
Failed to update database "C:INETPUBWWWROOTTASKLISTAPP_DATAASPNETDB.MDF" because the database is read-only.
How can I modify the permissions for ASPNETDB.MDF in order to run the TaskList example.
Thanks
View 4 Replies
ADVERTISEMENT
May 12, 2008
I am getting the error:
Cannot open database "aspnetdb" requested by the login. The login failed.
When I browse to my ASP.NET 3.5 LINQ web application on the IIS 6.0 server on Server 2003.
I imagine this is because while I granted SQL Server 2005 login and permissions to my database that the application stores its data in, I did NOT grant any rights to the service account the IIS Application Pool uses for its identity to the aspnetdb database on SQL Server which is where all my roles information is stored at.
My question is what are the MINIMUM permissions needed for this database so it can perform its roles related functions?
I'm using Windows Authentications with the SQL Role provider for authorization.
Thank you.
EDIT: I think I only need to open the aspnetdb database and add my login to the aspnet_Roles_FullAccess role. Is that correct?
View 2 Replies
View Related
Dec 28, 2006
I copied over a small website to 2003 Web Server and got: Exception Details: System.Data.SqlClient.SqlException:
Failed to update database
"D:INETPUBWWWROOTLUNCHCOUNTAPP_DATALUNCHCOUNT.MDF" because the
database is read-only. It works just fine in VS - what to do? Thanks
View 2 Replies
View Related
Jun 9, 2004
Hi,
I have sciprt that assign object
permissions to all databases.
I want to exclude all read only and dbo use only databases
Thank you
Alex
View 6 Replies
View Related
Jan 29, 2004
we have a database that only serves Select requests (no OLTP) for our very high traffic websites.
what are the benefits of turning on read-only setting for the database if there are no transactions occuring in the database?
does sql server put locks on tables for SELECT statements?
is it the same as using HINT (NOLOCK) ?
thanks
stephane
View 1 Replies
View Related
Mar 1, 2005
Hi,
We have a SQL server database on remote server. We are using ODBC connection to read and write into the table. But we have another user wants to retrieve(readonly access) our data on his pages. How can we create a user on our database and grant readonly access to that user?
Thanks..
View 3 Replies
View Related
Oct 12, 2007
Using SQL Express in this case, I have a database on one machine using one instance of SQLExpress that I detach. I then copy the database to a USB drive and take it to a different machine and attach it to a different SQL Express instance and it comes in as ReadOnly and I know of no way to change it.
One difference is that I have different users on the two systems, is that the cause? I wouldn't think that this would cause the database to show as ReadOnly, thoughI would just think that I may not be able to access it aside from using sa.
What is the likely cause of this?
Thanks
View 18 Replies
View Related
Dec 7, 2007
Dear All,
I need experienced advice on Security in SQL Server 2005. All I need specific advice on restrcting users to access SQL Server database to have only READ access for certain tables.
Thanks,
View 3 Replies
View Related
Mar 1, 2008
I am having a SSIS package which imports data from Excel (2003) files on the netoprk.
Its so happenning that one of those files are opened by someone else & package is giving AcquireConnection error.
As Package is only reading data from the files, i want to open the files in ReadOnly mode
How can remove this error ?
View 6 Replies
View Related
May 20, 2007
Is there any way to provide a readonly custom property in the ProvideComponentProperties() method of a custom PipelineComponent implementation?
View 7 Replies
View Related
Dec 11, 2006
I'm having trouble with a script component in which I'm trying to use two ReadOnlyVariables. If I use only one of the two variables, everything works without issue. If I use both of the variables (as part of a comma-delimited list) I get the following:
The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.
I don't believe the variables themselves are the problem. Both are scoped to the package level and I can use either of them if I have it as the only variable. Seems bug-like, but thought I'd get some ideas before pursuing that route.
View 11 Replies
View Related
Mar 20, 2007
I have two replicated databases i.e.
1. Database 1 is a live database where all live applications point
2. Database 2 is a replica of Database 1 and all reporting / BI applications point to this db. This is read-only.
Is it possible for reporting applications, pointing to Database 2, to create temporary tables in the read-only database?
Thanks
View 1 Replies
View Related
Jun 21, 2004
Hi experts,
Pls let me know , how to make normal db to readonly + accept tran logs
Rgds
Srinivas Varanasi.
View 2 Replies
View Related
Aug 3, 2006
Hi,I have a prod database (main bread & bread DB) and have a small accessdatabase that sales team is using... I created a login inside SQL 2000and gave db_read permission and SELECT permissions... and public.Role of public is EXEC store procs and view some systables...I linked those tables that I gave permissions through ODBC link intoaccess db with the user that I created inside SQL as readonly user...but to my surprise when I ran a insert query from access on SQLtables... I was able to update and insert data... if my ODBC link isonly for readonly.. why was I able to unpdate & insert data into SQLtable?I don't want to give write/update/insert permissions for SQL tables tosales team... or anyone outside SQL 2000 server DB.Is there any easy way to create viewonly users inside SQL?I created users like this: security -logins -new login...select none serverrole.. db access (bread & butter DB)Thank you,hj******Pardon my English...
View 1 Replies
View Related
Jul 19, 2006
Any idea to copy a standby/readonly database. We a have a standby/readonly DB from logshipping for hot standby and we would like to make a copy of this standby/readonly DB into a read/write DB in the same server for daily testing. Thanks in advance!
View 6 Replies
View Related
Sep 26, 2007
Hi,
I have a database running on sqlserver 2000. This database (let's call it TestDatabase) has 2 filegroups called 'PRIMARY' and 'SECONDARY', and is bulk-logged. The 'SECONDARY' filegroup is set to readonly since no data gets changed there by the applications, it is read-only data. Sometimes this read-only data needs an update, so I need to update the data in the 'SECONDARY' filegroup by running some long data-operations. These data-operations are executed and checked on a another database (which is a backup of TestDatabase) called TestDatabaseDemo. When everything is correct in TestDatabaseDemo we can copy all objects from the 'SECONDARY'-filegroup of TestDatabaseDemo to the 'SECONDARY'-filegroup of TestDatabase using DTS. This takes a long time and I want to try if I could speed up things by using the following strategy:
Take a full backup of TestDatabase
Restore full backup as TestDatabaseDemo
Run long-running data-operations on TestDatabaseDemo
Take a backup of TestDatabaseDemo
Restore only the 'SECONDARY'-filegroup from TestDatabaseDemo to TestDatabase, and keeping the 'PRIMARY' filegroup from TestDatabase as it was at that moment.
Suppose we arrived at step 5, I am executing the following commands:
Code Snippet
--make full backup of TestDatabase
backup database TestDatabase to DISK='G: emp estdatabase.bak' with init
--make full backup of TestDatabaseDemo
backup database TestDatabaseDemo to DISK='G: emp estdatabasedemo.bak' with init
backup log TestDatabase to DISK='g: emp estdatabase.log'
--restore secondary filegroup from TestDatabasedemo-backup
restore database TestDatabase FILEGROUP='SECONDARY' FROM DISK='G: emp estdatabasedemo.bak'
with move 'TestDatabase_Data_Secondary' to 'G: empTestDatabase_Data_secondary.ndf', NORECOVERY
--restore primary filegroup from Testdatabase-backup
restore database TestDatabase FILEGROUP='PRIMARY' FROM DISK='G: emp estdatabase.bak'
with move 'TestDatabase_Data' to 'G: empTestDatabase_Data.mdf', NORECOVERY
--restore log and try to get db onlin
restore log TestDatabase FROM DISK='g: emp estdatabase.log' with recovery
I get the following error:
The log in this backup set terminates at LSN 6000000021500001, which is too early to apply to the database. A more recent log backup that includes LSN 6000000022400003 can be restored.
When trying to execute "RESTORE DATABASE TestDatabase WITH RECOVERY; " as last statement
I get error:
The database cannot be recovered because the files have been restored to inconsistent points in time.
How i can restore the read-only filegroup correctly?
View 3 Replies
View Related
Jun 3, 2015
We have database when trying to make read only throwing below error: with stack dump
Location: recovery.cpp:4517
Expression: m_recoveryUnit->IsIntendedUpdateable ()
SPID: 51
Process ID: 6448
Msg 926, Level 14, State 1, Line 1
Database 'XXXX' cannot be opened. It has been marked SUSPECT by recovery.
See the SQL Server errorlog for more information.
Msg 5069, Level 16, State 1, Line 1
ALTER DATABASE statement failed.
Msg 3624, Level 20, State 1, Line 1
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Msg 3313, Level 21, State 2, Line 1
During redoing of a logged operation in database 'XXXX', an error occurred at log record ID (0:0:0). Typically, the specific failure is previously logged as an error in the Windows Event Log service. Restore the database from a full backup, or repair the database.
Msg 3414, Level 21, State 1, Line 1
An error occurred during recovery, preventing the database 'XXXX' (database ID 7) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
Investigation DONE:
- DBcc checkdb shown Clean
- database is online and able to access
-Detached database and attached with rebuild log, still could not bring database read_only
SQL version : SQL server 2008 SP4.
View 15 Replies
View Related
Jun 19, 2015
How to run the profiler on always on read only database to troubleshoot an ssrs issue ?
View 0 Replies
View Related
Dec 13, 2006
Hi,
I am trying to implement a log shipping scenario in sql 2005 where the secondary server is in standby mode with the ability to roll change during failover.
With the help of BOL (ms-help://MS.SQLCC.v9/MS.SQLSVR.v9.en/udb9/html/2d7cc40a-47e8-4419-9b2b-7c69f700e806.htm) I can implement my scenario in Recovery mode, but not in standby mode. I use the following sql to put my primary in standby
BACKUP LOG [database]
TO DISK = @filename
WITH STANDBY = 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBackupROLLBACK_UNDO_database.BAK'
GO
which works, but then my restore job fails on the last step. How can I put my primary db in standby mode in such a way that the log shipping restore will work?
Thanks
Andy
View 6 Replies
View Related
Oct 19, 2006
Hi,
I was just wondering if anybody came across this behaviour where closing a Fast Forward Read only cursor takes abnormally long time to close. I am running SQL Server 2005 standard edition.
Thanks
Nand
View 1 Replies
View Related
Jan 26, 2008
sir
I have got this error message to establish connction with recordset vb .net, Can you please rectify this
Too many arguments to 'Public Overridable ReadOnly Default Property Fields() As ADODB.Fields'
my code like this
rs = New ADODB.Recordset
rs.Open("Select * from UserLogin where userid='" & txtUserName.Text & "'", gstrDB, DB.CursorTypeEnum.adOpenStatic)
If txtUserName.Text = rs.Fields.Append(userid) Then
MsgBox("OK", MsgBoxStyle.OKOnly, "Confirmation")
End If
thanks
View 1 Replies
View Related
Apr 17, 2008
Hi,
I developed a simple custom control flow component which has several read/write properties and one readonly property (lets call it ROP) whichs Get method simple returns the value of a private variable (VAR as string). In the Execute method the VAR has a value assigened. When I put the value of ROP or VAR into MsgBox I can see the correct value. However when I execute the component I can not see the value of the ROP in the property window. I see the property but its value is empty string. For example when I put a breakpoint to postexecute or check the property before click OK in a MsgBox I would expect that the property value would be updated in SSIS as well. Is there a way how to display correct values of custom tasks properties in property window?
Thanks for any hints.
View 3 Replies
View Related
Mar 13, 2007
Using VS2005, VB backend and javascript,
I have developed a relatively simple site - its got a few (12) simple aspx pages but its mostly client side javascript. Keeping disk storage costs down is a big concern with this my site. The disk usage for the site is ~24M. Since this was larger than I expected I started inspecting the files comprising my site and found that the "ASPNETDB.MDF" in my "App_data" folder is consuming 10.2M by itself. The thing is that site only has a few pages with calls to SQL Server - but I never did anything (that I know of) with ASPNETDB.MDF. Through VS2005, I opened up the MDF file and poked around, everything that I looked at was empty (NULL).
So my questions are:
What is causing the ASPNETDB.MDF to consume 10.2M even thought I can't see any data stored in it?
Is there anyway for my to reduce the size of this file? If so, how?
Your input appreciated.
View 2 Replies
View Related
Nov 14, 2007
I'm creating a website in VWDexpress 2005 using a database, with string "SqlDataProvider". I have only one small-sized database. When I try to run my application in login mode (not using LoginView, I create it manually), the application cannot log me in, instead there's a weird error said some kind of "cannot use the ], [ or ) in database name". I don't configure the ASP.NET Configuration (which is opened in browser to make roles etc), I create all the controls manually. I don't have any other automatically-generated databases such as ASPNETDB.mdf because it cost lots memory! Oh, I used it before and the weird error I mentioned is occur when I excluded the ASPNETDB.mdf. I'm confused, why would the same error occur since I create everything manually? Any solutions? Thank you.
View 1 Replies
View Related
Jan 31, 2008
I am creating a new application and want to store the sql database. But i need the aspnetdb.mdf. I dont know where is the database located or do we have any scripts to create the database.
Any help would be useful
View 3 Replies
View Related
Apr 27, 2006
In response to a problem I have, my web hosting company asked me to rename aspnetdb.mdf. When I ask why, I was given this response
...it is because SQLexpless is developed for single database. If there is a same db name in the server, it cannot attach to the server. In order to prevent conflict, so that you need to change the SQLexpress's dbname into others to prevent conflict with others db name...
Does this make sense?
View 1 Replies
View Related
Aug 14, 2007
Hi,
I thought I had this corrected, but in fact don't. According to http://msdn2.microsoft.com/en-us/library/ms228037.aspx
SQL Express is supposed to automatically generate a copy of ASPNETDB.mdf in the App_Data folder of the Express edition development suites (I'm using Visual Web Developer 2005).
In my case, it doesn't, and I can't figure out how to trigger it manually. I've read every post I can find, especially http://forums.microsoft.com/msdn/showpost.aspx?postid=98346&siteid=1
However, that mainly applies to deploying a database that already exists. I have already tried deleting the files as suggested and they do reappear in the appropriate folder, but I'm still not getting the ASPNETDB.mdf file in my apps.
Any help on this would be greatly appreciated. I've had a post up on the Visual Web Developer forum, but folk are staying away in droves. Also tried uninstall and reinstall all the way down to IIS 5.1
biobot
View 4 Replies
View Related
Aug 1, 2006
I been all over this forum trying to find out how to get the aspnetdb.mdf running on my remote site and its driving me nuts.
i been using VWD 2005 express Edition and SQL Express
Error Server Error in '/' Application.
An attempt to attach an auto-named database for file I:DataWebqsh.eumarker_93618920-db3b-4a04-a274-3fb613afc5dfwwwApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
over the last week it has been a nightmare trying to get anything working on the site but i have got all the other databases working but i can get the aspnetdb.mdf working. i am very new to ASP.net so please use the he kiss method "Keep It Simple, Stupid!" as im a newbe to this and it will just go over my head.
Thanks
View 3 Replies
View Related
Mar 6, 2007
Hi there,
i wanted to embed ASPNETDB into my own db, so i scripted the ASPNETDB and executed it into my db. the problem is that App Manager of my website can not connect to it,(>i've corrected the connectionstring LocalSqlServer), the problem is that, it says its schema is not as expected, i understand this problem but, is there any way to solve it?
thanks in advance
View 2 Replies
View Related
Apr 19, 2007
Hi there readers of this post,
Do you know how to transfer the database (ASPNETDB.mdf) tables made by the ASP.NET admin tool into another database?
I want to run everything from 1 database.
regards
Sat
View 1 Replies
View Related
May 30, 2007
hello how is created asnetdb,mdf?...from where it`s get that structure?... i want some link where is explained structure and how asnetdb.mdf works. can you help me? thx
View 9 Replies
View Related
Jun 4, 2007
Hello,I have a shared hosting plan which already has aspnetdb.mdf on the server so of course I cannot use that db name for my site...I have renamed the db and now I get an error Could not find stored procedure 'dbo.aspnet_CheckSchemaVersion My question is, how can I make this thing work? All help is greatly appreciated!
View 12 Replies
View Related
Jul 6, 2007
When I first sign up with Visual Web Developer, Do I continue to use this database ASPNETDB.MDF or do I need to connect to the Microsoft SQL Server Database? Does Visual Web Developer Express automaticaliyy connect to SQL Server Express Edition?
Thanks
Computergirl
View 1 Replies
View Related
