OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
If I have serveral queries as shown below: ================================================== ========== USE XXX SELECT XX_ZZZZZ, XX_YYY, XX_XXX FROM ZZZ_ZZZZ_ZZZZ WHERE QQQQQQQQQQQQQ ='PGL'
USE XXX SELECT AAA_AAAAA_AAAA,AA_BBB, CC_DDD FROM SSSS_SSSSS_SSSSS WHERE FFF_FFFF ='A' ================================================== =========== Can anyone tell me if the queries execute concurrently or is it one after the other?
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
I'm looking for a way to refer to a package variable within any Transact-SQL code included in either an Execute SQL or Execute T-SQL task. If this can be done, I need to know the technique to use - whether it's something similar to a parameter placeholder question mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements within the Execute SQL task, so I don't think the Execute T-SQL task is even necessary for this purpose.
In the control flow, I have more than one sequence containers, and I have a script component that I want to be executed only when of 2 last sequence finished with sucess... these 2 sequences does not have any relation with each other...
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination) Could you tell me why then other is slower?
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
In the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
I have one Data flow, which trasfer data into two table (Parent & Child) .
My question is : Is there a way, i can load data first into parent and then child table. because child table getting load first after that parent table loading. (Execution should be Source Parent --> Destination Parent) First , (Source Child --> Destination Child) Second. In my case its executing reverse. So i have foreign key constraints at child table , its giving foreign contraints error while running ssis package
Can any one tell me, How to define my own sequence execution at the Data flow task (Source - Destination) ?
Our VB application throws .dtsx on-demand by using Threads. Everything's fine but a little detail: when it goes to launch a SSIS package with a only task, concretely a Sequence Container task (empty, without tasks inside) fails Prevalidate method.
I have a SSIS package contains an "Execute SQL Task". The SQL will raise error or succeed. However, it sounds the package won't pick up the raised error?
Or is it possible to conditional run other control flow items according the the status of SQL task execution?
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly 2)The selected package cannot be opened 3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?Ώ
I am creating a staging database in which I am loading required tables from 2 different sources. I have 30 different tables to load from source 1 and 10 different tables from source 2. This is the way I am doing, in Control flow task I am using Sequence container and in that I included the data flow task, the data flow task has source OLD DB connection from where I select the table and then destination OLE DB connection where I load the data. So for 30 tables I have one Sequence container with 30 different data flow task and each data flow task has OLE DB source and OLD DB destination. I wanted to find out if this is the efficient way to do, or if there is any other way to do this. And for source 2 shall I put in another package or shall I use the same package with different sequence container and follow the same steps as for Source 1 tables. Please advice. Thanks,
We have Sequence generatorΒ (Next Value)Β enabled for surrogate keys (SQL Server 2012). When we use the new SCD task, we get the following error:
[Insert Destination [42]] Error: SSIS Error Code DTS_E_OLEDBERROR.Β An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available.Β Source: "Microsoft SQL Server Native Client 11.0"Β Hresult: 0x80004005Β Description: "NEXT VALUE FOR function cannot be used if ROWCOUNT option has been set, or the query contains TOP or OFFSET. ".
Is there any know issue that these two features [SCD task and Next Value]Β cannot be used together?
I've created an SSIS package that contains a Sequence Container with TransactionOption = Required. Within the container, there are a number of Execute Package Task components running in a serial fashion which are responsible for performing "Upserts" to dimension and fact tables on our production server. The destination db configuration is loaded into each of these packages using an XML configuration file. The structure of these "Upsert" packages are nearly identical, while some execute correctly and others fail. Those that fail all provide the same error messages.
These messages appear during Pre-Execute
[Insert new dimension record [1627]] Error: The AcquireConnection method call to the connection manager "DW" failed with error code 0xC0202009.
[DTS.Pipeline] Error: component "Insert new dimension record" (1627) failed the pre-execute phase and returned error code 0xC020801C.
... which are followed by
[Connection manager "DW"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
[Connection manager "DW"] Error: An OLE DB error has occurred. Error code: 0x8004D00A.
While still in debug mode, I can check the properties of the "DW" connection and successfully test the connection within the packages that fail.
The same packages run successfully when tested outside the container (i.e. no transaction) or when the configuration file is modified to point the "DW" connection to a development version of the db which is running on the same server as the source database.
I have successfully used DTCtester to verify that transactions from source to destination server are working correctly. Also tried setting DelayValidation = True with no change. I have opened a case with Microsoft and am awaiting a reply so I thought I'd throw a post out here to see if anyone else has encountered this and might have a resolution. Here's some more on the environment:
Source Server:
Windows Server 2003 Enterprise Edition SP1 SQL Server 2005 Enterprise Edition SP0
Destination Server:
Windows Server 2003 Enterprise Edition SP1 SQL Server 2000 Enterprise Edition SP3 (clustered)
Thank you in advance for any feedback you might be able to provide.
I have multiple sequence containers in my package. Β I only want to have one sendmail task for the failure/completion of the package. Β If I put the sendmail task in the last sequence container and the first seqence fails, the sendmail task will not be reached and therefore, no email will be sent out.Is there a way to have one sendmail task for all the sequence containers and allow it to send mail regardless of what sequence fails/completes?
I am trying to execute a SP in the execute SQL task in SSIS 2005..
but I keep getting an error:
SSIS package "Package.dtsx" starting. Error: 0xC002F210 at Load_Gs_Modifier_1, Execute SQL Task: Executing the query "exec Load_GS_Modifier_1 ?, ?" failed with the following error: "Could not find stored procedure 'exec Load_GS_Modifier_1 ?, ?'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: Load_Gs_Modifier_1 SSIS package "Package.dtsx" finis
I have set up two user parameters: startdate and enddate.. I am not sure what I am doing wrong????
Phil writes "I have a simple question. My scenerio is that I would like to read a column from a table in a SQL database in the Execute SQL Task in SSIS. I would like to assign the value of that column (which is a nvarchar(50) column) to a variable.
The issue I'm having is that unless I make the variable's data type an "object" I am getting the:
"The type of the value being assigned to variable "User::output_location" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object."
error.
I've checked profiler and verified the call is getting to the database. Why can't I populate a nvarchar column to a string data type variable?
[Execute SQL Task] Error: Executing the query "INSERT INTO SSISLog (EventDate,StaffNo, EventType, EventDescription) VALUES ( '@[System::CreationDate]+', ' +@[System::SourceName]+' , 'OnError', '+ @[System::ErrorDescription] +' ) " failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any pointers will be highly appreciated. Oh and the purpose of this is to put error logs into the SSISLog table.
I am trying to run a Direct Input SQL query to SELECT MAX value of ColA. This query when I run on Query Window runs fine - means it is NOT a NULL. I get a max value.
When I run this query on a SSIS package outputing to a variable - I get the error. -
[Execute SQL Task] Error: An error occurred while assigning a value to variable "MAXROWKEYID": "The type of the value being assigned to variable "User::MAXROWKEYID" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. ".
I need this output to be used for the subsequent steps which follows this.
I am using Value Type as Double. This was the default when I migrated this DTS package from SQL 2000. I use the proper Single Row for the Result Set and for outputing the Result Set, I use the correct Variable Name.
I execute a sql task to get full resultset. How do i stop processing (With Package success) the package (With Package success) if the resultset returned is empty? Their does not seem to be any swith or expression to stop processing if i dont get any results.
In the sqlstatement for Execute SQL Task, I want to specify a sql statement (if (select count(*) from table1 > 0) then execute next task, which is send mail task.
how do i achieve this? , how can I specify a conditional statement and execute the next task based on the result?
Hi, can anyone tell me how to create multiple tables using execute sql task. i am getting error messages when i try to execute. I am using OLE DB Connection type. and i am running Execute sql task insede the Foreach looop container. Error messgae is: [Execute SQL Task] Error: An error occurred with the following error message: "Access to the path 'C:Documents and SettingsAdministratorDesktopCreateTableSQLStatements' is denied.".
Thanks and regards, Sheetal sheetal_net@hotmail.com
how would you use a package variable in inline sql, is there a format utilized? Are there any steps I need to take to do that? I currently have the SQL Execute task inside a ForEach Loop container, which has the variable mapping for the ID that i need for the SQL Execute task. I just need to know the syntax to use parameters in my query in my task. here is the current code which doesnt work:
INSERT INTO LAFProcess.ProcessList (WorkListID, CreatedOn, ProcessStartedOn, Status) SELECT WorkListID, GetDate(), NULL, 2 FROM LAFProcess.WorkList WHERE Status = 2 AND LoanApplicationID = " + @[User::LoanApplicationID] +"
UPDATE LAFProcess.WorkList SET Status = 1 WHERE LoanApplicationID = " + @[User::LoanApplicationID] +" AND Status = 2
Note: Do i have to setup anything in the parameter mapping or result set for this execute sql task or for the for loop container around it because right now nothing is setup for Execute SQL Task. Pls let me know. The for loop container is connected to a another sql execute task which is resulting in a fullResultset, which the for loop container loops thru(ADO Enumerator). But also need to pull a value(basicaly setup a variable but dont know where). I am really confused can someone please help me. The loan application id is what i want in my query and it should come from the Collection(ForEachLoop). I am supposed to run the above task for each (LoanApplicationID found in my collection).Thanks.
I have a Sql execute task, which has a select query which returns back a column value(always one value). I need to store that into a user variable. Do i add a resultset type, and if so which one? Also do i add a new parameter in the param mapping window, with direction of output? Please let me know, since I need to store the resultset value to a user variable. Thanks.
