I am writing a package to process perfmon logs. The issue I have come across is that the perfmon process holds onto the log file and SSIS fails because it wants to exclusive read access. Is there any way of getting SSIS to not take an exclusive read on the file.
I can read the file in notepad fine but not SSIS.
Hello,
I have had a full lock on my sql server and I have a few logs to found the origin of the lock.
I know the process at the head of the lock is the 55 process.
Here are the information I have on this process:
Spid 55 55
ecid 5 5
Ecid 0 0
ObjId 0 1784601646
IndId 0 0
Type DB PAG
Resource 1:1976242
Mode S IS
Status TransID GRANT GRANT
TransID 0 16980
TransUOW 00000000-0000-0000-0000-000000000000
00000000-0000-0000-0000-000000000000
lastwaittype PAGEIOLATCH_SH
CMD AWAITING COMMAND
Physycal id 1059
Login time 2007-07-05 04:29:53.873
nat address DFF06EBF974D
Wait type 0x0046
HostName .
BlkBy .
DBName grpprddb
CPUTime 54331
DiskIO 1059
ProgramName
Would someone know a way to identify the origin of the process 55?
I have already tried to execute the following request:
select * from SYSOBJECTS
where id=1784601646
But I have had no returns.
Regards,
Renaud
Hello:I run one process that calls the following the store procedure andworks fine.create PROCEDURE sp_GetHostSequenceNumASBEGINSELECT int_parameter_dbf + 1FROM system_parameter_dbtWHERE parameter_name_dbf = 'seqNum'UPDATE system_parameter_dbtSET int_parameter_dbf = int_parameter_dbf + 1WHERE parameter_name_dbf = 'seqNum'ENDGOIf I run two processes that call the above store procedure, I mightoccasionally get the dirty data of int_parameter_dbt. I guess that iscaused by two processes accessing to the same resource simultaneously.Is there any way to lock the store procedure call from MSSQL Serverand allow only one process to access it at a time?Thanks for help.Best Jin
View 2 Replies View RelatedHi,
I've started 2 dbcc processes using SQL Scheduler overnight. and I've got
one is flagged rollback and the other is still running, they are blocked
together. I've tried to kill them using kill <spid> without success.
How can I delete this processes ? Shall I shutdown the server ?
Thanks
Herve
Anyone seen this SSIS error when importing data? I have a 64bit quad processor with 8gb and am importing from Oracle 9 using 32bit DTExec.exe from the command line.
OnInformation,Myserver,MyDomainSQLAdmin,J001OracleDimExtract,{CEB7F874-7488-4DB2-87B9-28FC26E1EF9F},{1221B6EB-D90A-466E-9444-BA05DBC6AFD8},6/29/2006 10:58:08 AM,6/29/2006 10:58:08 AM,1074036748,0x,The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 2 buffers were considered and 2 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
Thanks
Details:MS SQL 2000 dual Intel 1.2 GHz processors.1 GB RAM2.1 GB dBDynamic Memory Managment.No other apps running on this server.First question:Since I have Dynamic Memory Managment setup, Is it usuall that thesqlsrv.exe process on the server steadily climbs and is in the 800 to900 MB range. There is only about 20 MB free. In theory this is howDMM can work, but do people really see it work this way.Second question:I had users complaining about lockups in the app I have to supportthat connects to this dB. At first I thought it was the large use ofmemory, but once I was able to see in Enterprise Manager that therewas process blocking several other processes. EM then locked up and Icouldn't get to the details of what the exact process was that wasdoing the blocking. After restarting SQL services things were fine.When I checked the logs there was nothing there about a hung process.The logs seemed very sparse. Why would there not be anything in thelogs about it. The logs actually seem very thin on any information.Thanks,T.
View 1 Replies View Related
Hi!!
I need some help to importing Acces file to SQL 2005.
Thank's
Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.
So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with
FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).
I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.
Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.
Hi I am using VWD 2008, SQL Express 2005, Reporting Services, Win-XP, IIS5Basically let's say I have 2 pages:Page1: has a SQLDataSource control that populates a GridView from a table from a database file myDB.mdf (no code behind)Page2: has a reportviewer control that show a report with data from the same table from myDB.mdf from the reportserver, (no code behind)I have attached myDB.mdf to the SQL Server Express using the SQL Server Management Studio Express.If I first open Page2 to display the ReportViewer it works ok. or using the Report ManagerNow this is the problem:If after that I try to open Page1 then a get an error message:Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'. Exception Details: System.Data.SqlClient.SqlException: Cannot open user default database. Login failed.Login failed for user 'myServerASPNET'.Then I have to restart the SQL Server to fix it,Now I can open Page1 ok, but if after this I try to open Page2 (ReportViewer) againThen I get this error:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. &And this error if open the report using the report manager:" An error has occurred during report processing. o Cannot create a connection to data source 'my_Datasource'. § Unable to open the physical file "C:InetpubwwwrootWebsiteApp_DatamyDB.mdf". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". &Now if i check the Management Studio Express again, you can see that myDB.mdf was detached. It seems to be there by it has no Tables or definitions, so I have to attach it again..Do you know how to fix this?Thanks in advance,Ed
View 5 Replies View RelatedMy mdf and ldf files were locked by windowsXP. Iam not using these files in anywhere of my two instances of databases.
Even after stopping SQL SERVER 2005 iam not able to cut or copy those files.
How to recover this files.
Hi Folks,
When I create a Database and try to copy the MDF file, I get a message to say that the Database is locked or in use by another user.
Seems like maybe I am not doing a 'Save' operation - although I can't find one ?
If I shut down the PC and restart it, then the MDF File is freed up, although when I try to open it, there is something wrong with it.
I'd appreciate any suggestions.
Thanks a lot.
Barry
Hello All,
Hopefully one of you gurus can offer a solution to this problem:
First off I do not have the ability to use SQLMail - so that is not an option.
I have a DTS package that performs the following steps in order to populate an excel sheet with some data and email it off to a coworker:
1) FTP Task to copy excel sheet template from one folder to another on same machine
2) Data pump between SQL server connection (local) and copied excel sheet.
3) SQL script task which truncates a table on the sql server
4) activeX script task which contains the following code that uses CDO to attach the excel sheet that was just populated to an outgoing email:
Function Main()
Dim iMsg
set iMsg = CreateObject("CDO.Message")
Dim objMail
Set objMail = CreateObject("CDO.Message")
objMail.From = "from@from.com"
objMail.To = "to@to.com"
objMail.AddAttachment("F:copiedexcelsheet.xls")
objMail.Subject="subject"
objMail.HTMLBody = "Body"
objMail.Send
Set objMail = nothing
Main = DTSTaskExecResult_Success
End Function
The result of DTS execution is a failure on the activeX step:
Error Description: The process cannot access the file because it is being used by another process.
I assume this means Excel still has its grubby paws on the file - but I've tried alleviating this by (1) using a waitfor delay between the excel connection and the activex script task and even by (2) using the run package task to run a separate package that only has the activex mailsender script in it (thinking the parent package would terminate along with the excel process before running the next package - maybe I'm wrong here?).
Can anyone suggest a solution to this!?
Thanks!
K
I have a package the looks for any Excel files in a folder, moves the data to a SQL table, then archives the file to one of two archive folders--a success folder or an error folder. I have an OnError handler on the Data Flow that sets a flag that lets the archive process know where to move the file.
This works when the processing is successful. It also works when the error in the Data Flow occurs right off the bat, i.e., in the Source. When the error occurs later on, say in the Destination, it doesn't work correctly. In this case, the OnError sets the flag, but when the archive process tries to move the Excel file, it can't because it's locked. I assume this is because OnError interrupted the Data Flow before the Excel file could be closed properly.
Any ideas on how I can avoid this problem? Can I manually get the Data Flow to close the Excel connection somehow?
Guys.
This has been an issue for me. It happens once in a while.
I am importing a File from a shared folder thru DTS package. Once in a while the DTS package fails due to the following error.
"Error Opening Data File: Process cannot access the file because it is being used by another process"
Is there anyway I can specify that the file is going to be opened in read only, so that the DTS will not fail?
Any other solution/suggestion?
-MAK
Hi,
I'm trying to upload the ASPNETDB.MDF file to a hosting server via FTP, and everytime when it was uploaded half way(40% or 50%)
I would get an error message saying:
"550 ASPNETDB.MDF: The process cannot access the file because it is being used by another process"
and then the upload failed.
I'm using SQL Express. Does anybody know what's the cause?
Thanks a lot
I have a File System Task Copy file operation to copy a file in an SSIS package. The package when scheduled as a job fails with the following error:
The process cannot access the file 'C:ETLConsignmentAppleAppleRawFile.txt' because it is being used by another process.".
However when I right click on the package and execute it manually from the Integration Services it runs successfully without any problem. I am not certain on how to resolve this issue any inputs will be much appreciated.
Thanks,
Monisha
Error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
When running two File System Tasks after each other, with the same file, the file is still locked when running the second task. Resulting in an error: 0xC002F304 at Rename file 1, File System Task: An error occurred with the following error message: "The process cannot access the file because it is being used by another process.".
I found a workaround by addind a Execute Process Task before the second File System Task that pings to the localhost. This results in a 5 second delay, but there must be a better solution. Anyone?
While configuring log shipping using SQL 2000 Ent, the copy process failed with this message :
The process cannot access the file because it is being used by another process.
does anyone know what cause this ?
SAP R/3 is configured with the system, could this be the problem ?
I need to write a process to get file size in kb and record count in a file. I was planning on writing a c# console app that takes the file path and name as a param however should i use a CLR?
I cant put a script in the ssis when it's bringing the file down because it has been deemed that we only use ssis for file consumption.
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles
And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Product_20120607060930.txt
Product_20130708060930.txt
[code]....
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
Unable to open the physical mdf file or log file because it is being used by another process
I am trying to write a Windows Application using ASP.NET 2.0, C#2005 EXPRESS, and SQL 2005 EXPRESS.
I had followed the introductory video to create a connection to the Database using Windows Authentication, and use the wizard to create a dataset and checking all the tables in the database.
After that I dragged a table from the data source created from the above process. The Details Grid so created is able to perform update, delete and addition of records.
But when I went back to the database at my PC I wasn€™t able to connect to the database. And if I opened the database first and then load the windows application and perform some database operations and went back to the physical database I wasn€™t able to open the tables in the database.
The error message is that the physical database connection cannot open the .mdf file or log file because another process is using the database. I guess it refers to the Windows Application.
Is this normal? Will it have any implications after the application is deployed? I suppose that there isn€™t a scenario where a Windows application and a physical process will access the database at the same time.
Will appreciate some feedback and advice on this scenario and whether it is a problem.
Thanks and regards
OldStd
I am wondering how easy is to check for file locks and have our SSIS Package to wait until file has been release by the process which is using it.
Also, same question when we're writing to a Flat File (or Flat File Destination).
Thanks,
I am using a File System Task to delete the contents of a directory however there may be cases where a process is still using one of the files. What I want to do in these instances is to wait for a period of time and then retry the deletion.
Does anyone know of an easy way to implement this?
Thanks
OK, I just want to know if I can use SSIS to open one text file create a table with the info in
SQL Server. Then open another fixed length file and insert rows in this table. I want to do this from an application in .Net. for e.g. I have a file that says "Col1 String 20, Col2 String 20,". This will create a table "Table1" in database DB1. then it will open a text file that has 200 rows for Col1 and Col2 with fixed length as 20. The table will be filled with the rows in the second text file. I want to give the user the ability to select the above files and when he clicks submit, the table will be filled. Is it possible?
I have an SSIS solution with 8 packages in it. I have checkpoint turned on with the 'If Exists' option. Each of the 8 packages have 8 separate checkpoint files specified.
One out of two runs will fail with one of the below errors:
The checkpoint file \xxxxxxxx is locked by another process. This may occur if another instance of this package is currently executing.
Checkpoint file \xxxxxxxx failed to open due to error 0x80070020 "The process cannot access the file because it is being used by another proces
I have checked all the settings and everything looks fine, looks like the problem is when you have many Control Flow tasks in a package and if two of them are completed at the same time and they try to write to this file one of them is unable to write and it fails.
This is causing the entire job to fail even though the control flow was successful.
Anyone encounter this issue? Any assistance is appreciated.
Thanks!
hi i was trying to generate a .xml file by using this command below
DECLARE @Table varchar(20),@filename varchar(50), @SQL nvarchar(4000)
SET @Table ='Authors'
SELECT TOP 1 @Filename = au_fname FROM Authors
SET @FileName = 'C:' + @Table+'_'+@FileName+ '.xml'
SELECT @FileName
DECLARE @Table varchar(20),@filename varchar(50), @SQL nvarchar(4000)
SET @Table ='Authors'
SELECT TOP 1 @Filename = au_fname FROM Authors
SET @FileName = 'C:' + @Table+'_'+@FileName+ '.xml'
SELECT @FileName
SET @SQL = 'EXEC master..xp_cmdshell '+ ''''+'bcp'+ ' "SELECT ''au_fname '' AS ''Name/First'', au_lname AS ''Name/Last '' FROM pubs.dbo.authors ORDER BY au_lname FOR XML PATH (''Books''), ROOT(''Authors''), TYPE, ELEMENTS " queryout '+ @FileName + ' -c -SlocalHost -Usa -P'+ ''' '
SELECT @SQL
EXEC(@SQL)
i got an error saying
Msg 102, Level 15, State 1, Line 1
Incorrect syntax near 'au_fname'.
i could no tfigure it out my mind window is closed.can any one help me put to find a bug.
many many thanks
I'm using Visual Web Developer 2005 Express, SQL Server 2005 and using the local file system as opposed to IIS for development purposes.
I will reference two pages of my site: one that manages Types of Tours and one that downloads a Tour Registration Excel file.
On the Tour Types page, there is a sqldatasource that populates a DetailsView whose default mode is Insert. On that same page I have a GridView that is populated from the same sqldatasource. The gridview has Paging, Editing and Deleting enabled. There is no code behind on this page except for a prompt to the user to confirm the delete action if he has elected to delete a Tour Type. This page works fine no problems.
On the download page, I have a prompt that allows the user to click a button to download the Tour Registration Excel file. The code behind opens the Registration table in the ASPNETDB.mdf database, builds an .xls file via a streamwriter and prompts the user to download the file.
My problem: if I start up VWD, go into my project, go straight to the download page without accessing any other pages, the download page works fine. If I access any other pages first and then go to the download page, I get the error "System.Data.SqlClient.SqlException: Unable to open the physical file "C:....App_DataASPNETDB.MDF". Operating system error 32: "32(The process cannot access the file because it is being used by another process." My simplified code behind is this:
Dim sw As System.IO.StreamWriterDim myConn As Data.SqlClient.SqlConnection, query As String, myCommand As Data.SqlClient.SqlCommandDim myReader As Data.SqlClient.SqlDataReaderDim fileName As String, baseDirectory As String, fullFileName As String
fullFileName = baseDirectory & fileNamesw = New IO.StreamWriter(fullFileName)myConn = New Data.SqlClient.SqlConnection("Persist Security Info=False;Integrated Security=true;AttachDbFileName=C:<pathnamehere>App_DataASPNETDB.mdf;database=ASPNET;Data Source=.SQLEXPRESS")query = "SELECT Registrations.RegistrationNum, Registrations.Title, Registrations.LastName, Registrations.FirstName, Registrations.Organization, Registrations.StreetAddr1, Registrations.StreetAddr2, Registrations.City, Registrations.State, Registrations.Zip, Registrations.WorkPhone, Registrations.HomePhone, Registrations.CellPhone, Registrations.email, Registrations.AddToMailingList, Registrations.NumberInParty, Registrations.Comments, Registrations.DateRegistered, Registrations.TourDate, Registrations.TourFormattedTime, TourTypes.TourTypeDescr FROM Registrations INNER JOIN TourTypes ON Registrations.TourTypeNum = TourTypes.TourTypeNum"
myCommand = New Data.SqlClient.SqlCommand(query, myConn)myConn.Open()As soon as the code his the myConn.Open(), it abends with the above message. I then have to close the project, and stop and re-start SQL Server. HELP!!
I occasionally receive the following error on backups to a disk backup device.
BackupDiskFile::CreateMedia: Backup device 'F:MSSQLBACKUPFull_Backup.BAK' failed to create. Operating system error = 32(The process cannot access the file because it is being used by another process.).
There are no other jobs running that access this file during the backup. So nothing else should be trying to touch the backup file.
Rerunning the backup again seems to work so it does sound like something is accessing the backup file, I just can't figure out what.
The backup proc reinitializes the backup file each time it runs with the init parameter and then appends remaining backups with noinit. This error occurs on several different servers. Could there be a problem reinitializing the same backup device? It seems like a previous backup has not let go of the device.
I am running SQL 2000 SP2 on Windows 2000 SP2.
Any ideas?
hi,
i have designed DTS packages, I have a script component that picks up the 'Path' of a file stored.
The Path is a column in database and that obtained from OLEDB source.
now i need to zip the files in the path given above and than store it in some location. How do I do that?
I am getting this error on replication and don't know why. Any ideas?
The process could not read file '\NJRARSVR00E9d$sqldatasystemMSSQL$P001ReplD atauncNJRARSVR00E9$P001_PTR_PTR20040707104224s napshot.pre' due to OS error 5.
I am working with SSIS package. It executes everyday.
It has the file system task. It moves the production backup from one server to the different server. In today's execution the package failed with the following error
Error Description:An error occurred with the following error message: "The process cannot access the file 'ECOSQLDumpsTest_backup_2015_02_03_230004_1557700.bak' because it is being used by another process.".
How to find which process is using that test backup file?
Hi.everyone.I use two computer in workgroup.I use A to be a publisher and distributor ,B to a Subscrible.When i create a snop in A computer and Create snopshot in "C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQL
epldataunc",when I use "view Synchronization Status" in B computer, the show "job already success start",but in A computer sqlserver error log show "Message
Replication-: agent LIUQINASERVER2005-TestTran-Tran-LIUQIANHOMEHOME-6 failed. The process could not read file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLReplDatauncLIUQINA$SERVER2005_TESTTRAN_TRAN20070409150285ame_2.pre' due to OS error 3.". The publisher snapshot agent is servernameadministrator.
I find a lot of message in internet ,but no one can help me .I try use same account and password in two computer.but no help.
Please tell me why and how to solve it ? Thanks.
I have a SSIS package with the last three tasks in the control flow are stopping the SSAS, then "on success" the second last task is execute a batch file to copy a bunch of files to a remote server using the robocopy command, then "on success" the last task is to start the SSAS. I test all three tasks individually and they are all working fine. The problem is in-between the second last task and the last task, the second last task is to execute a batch file and then forward to the last task. The task just moved to the last task once the batch file is executed and it did not wait until the actual robocopy job is completed. Therefore it caused a problem in the robocopy process. Thanks.
View 1 Replies View Related