Access Crashes Filtering A Linked SQL Table On A Date Field
Jun 29, 2006
I have an MS Access 2002 application that is distributed to a number of PCs around our office. The data for this application is stored on a central SQL Server that is linked in through ODBC.
This application has been in place for two years and working fine. We recently formatted and restored a PC, and now that particular PC has issues with the Access application.
Every time it tries to filter one of the linked SQL tables on a date field, Access goes unresponsive and GPFs out. If it's in a query that is behind a report, I get the old standard 'Catastrophic Failure'. If I open the table and right-click filter or run a query manually, Access GPFs.
I've tried recreating the ODBC, linking the tables through TCP/IP as well as Named Pipes. Nothing fixes it. All Windows and Office updates have been applied. This is not the first time we've reformatted a PC in the office, but we've never had this issue.
Has anyone run across this before?
Thanks!
-Ben
View 1 Replies
ADVERTISEMENT
Nov 3, 2006
Can someone tell me sql query for filtering date field for current day,not last 24hours but from 00:00 to current time?
View 2 Replies
View Related
Jan 3, 2007
Hi,I have a date/time field in a SQL2000 database, and what I would liketo do is to filter on a specific part of the field, for example thetime or hour.Supposing I have a set of data for the last 5 years and would like tofilter out any records which are outside working hours i.e. I wouldlike to show records where the time is between 9am and 5pm.Does anyone know if there is a simple way to do this in SQL? If yousimply don't specify the date part in the where clause (e.g. WHEREissuedatetime between '09:00:00' and '17:00:00') it defaults it to1900-01-01 so basically no data is returned.The only way I can see to do this is by using the DATEPART function,converting it to a varchar, appending 1900-01-01 on to it andconverting it to a datetime, and then using the where clause as statedabove. This is quite a long-winded way, however. Any other suggestions?Thanks,Matt
View 3 Replies
View Related
Jan 25, 2006
I am trying to load a table from MS Access into SQL Server. The Table has several columns defined as Date/Time. When I define the transform I get an error saying that the conversion between DT_DBDATE and DT_DBTIMESTAMP is not supported.
How do I get around this?
View 1 Replies
View Related
Jan 12, 2000
Hi Everyone,
I have set up a link from ACCESS to a SQL 7.0 database using ODBC (File DSN saved on a shared DRIVE). The link works well only from the workstation where the link was created. But How can I create a link so a group of users can view the linked table in ACCESS without type a password? Any suggestion is appreciated.
Lunjun
View 2 Replies
View Related
Feb 6, 2007
Hi!
when I'm trying something litle bit more complex thing than string manipulation in calculated field ex: =RunningValue(Fields!SALES.Value, Sum)
It just crashes visual studio when trying to run the report?! I think this could state as a bug in RS?
View 4 Replies
View Related
Jun 18, 2004
Strange one here - I am posting this in both SQL Server and Access forums
Access is telling me it can't append any of the records due to a key violation.
The query:
INSERT INTO dbo_Colors ( NameColorID, Application, Red, Green, Blue )
SELECT Colors_Access.NameColorID, Colors_Access.Application, Colors_Access.Red, Colors_Access.Green, Colors_Access.Blue
FROM Colors_Access;
Colors_Access is linked from another MDB and dbo_Colors is linked from SQL Server 2000.
There are no indexes or foreign contraints on the SQL table. I have no relationships on the dbo_ table in my MDB. The query works if I append to another Access table. The datatypes all match between the two tables though the dbo_ tables has two additional fields not refrenced in the query.
I can manually append the records using cut and paste with no problems.
I have tried re-linking the tables.
Any ideas?
Thanks,
Brad
View 4 Replies
View Related
Jul 12, 2007
First off, it has been a few years since I have done extensive work with SQL and that was using Oracle. But I am trying to develop a simple asset database for work, as we have nothing in place. I started out with Access, and decided to move to SQL express for many reasons.
What I have now is that I imported my data from my access 97 database to Excel, only my AssetTable did not import dates, I assume because Access and Sql Express handle dates differently... so a the time I just ignored that column.
Is it possible to insert the dates into the now populated SQL Express database AssetTbl where the AssetID's match? Here is what I have.
Sql Express Database Name: BAMS
Table Name: AssetTbl
fields: AssetID, SerialNum ...(many other fields)... DateAcq <- currently Null
Excel file: AssetDateAcq.xls
fields: AssetID, DateAcq (in format 07/12/2007)
To me it sounds like I need to do a short script/program to loop through the file read an AssetID from the excel file, and the DateAqcuired and then have it do an update on the DateAcq field, but it has been so long since I've done any work with SQL that I am finding there is a lot of "Dust" to blow off, and I don't know if I'm heading down the right track... or completely off course.
Thank you.
View 9 Replies
View Related
Nov 7, 2005
I've created a linked table to Access. I want to be able to delete records and modify existing records through this linked table. I used the account with sa privelleges yet i am unable to delete/update any records.
Does anyone know if there is any fix or am i doing anything wrong ?
View 3 Replies
View Related
Apr 30, 2004
I'm using ODBC to link a SQL table to access and using Access as the frontend, so to speak. Trying to write a query, but I get Timeout Error.
I need to resolve the timeout error, I've tried several things in the ODBC
configuration, but no solution yet.
thx
jm
View 7 Replies
View Related
Jul 20, 2005
Hello,I am having a problem when using access xp as a frontend for sql server2000.I have been trying to update a number of stored procedures (Just simpleadding fields etc) which results in access crashing with event ID 1000 and1001.Does anyone have any ideas as to what could be the problem?Thanks in advance..
View 3 Replies
View Related
May 26, 1999
I currently have a database that I can update in Microsoft Access by going into datasheet view of the table and just changing the value of a given field.
Here is the problem. I have made a copy of this database by backing it up and restoring to a new database. Now when I go into Access datasheet view to update, I get the following error: "ODBC--update on a linked table '<tablename>' failed". I have tried restoring to a database on the same server as well as others and have checked for differences set for each database as well as differneces in indexes. Any suggestions would be appreciated.
Thanks in advance
Keith
View 2 Replies
View Related
Mar 11, 2004
Can the DTS execute SQL task recognize a table in an Access database that is linked from another Access database?
I'm attempting to use a DTS Execute SQL task connected to Access1.mdb to make a new table in Access1.mdb that is using a Subquery from a linked table in Access2.mdb . (I know it sounds convoluded..) Its giving me an error in my FROM clause as if it can't recognize the linked table from Access2.mdb.
The reason why I'm doing this is that I'm not sure how to run an Access make table query from DTS that will overwrite the existing table in Access. I get an error that the table already exists.
Any Help?
View 1 Replies
View Related
Jan 15, 2008
I'm trying to set up a linked table from SQL Server 2005 to MS Access. The .mdb file resides on a network share and I'm unable to connect to it. If i copy the database to a folder on the server that SQL is installed, it works fine. Any help would be greatly appreciated. Below is the error message that I'm receiving.
TITLE: Microsoft SQL Server Management Studio
------------------------------
"The linked server has been created but failed a connection test. Do you want to keep the linked server?"
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "LINKSERVER".
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "LINKSERVER" returned message "The Microsoft Jet database engine cannot open the file '\serversharedatabase.mdb'. It is already opened exclusively by another user, or you need permission to view its data.". (Microsoft SQL Server, Error: 7303)
View 3 Replies
View Related
Sep 27, 2006
I have access97 front end , with linked tables to sql server 2005. when i change a table ID column (type int) to primary key so it is updatable, then try open the table i get odbc error with no msg, if i alter table again to remove primary key option table opens fine but is not updateable. any ideas would be a great help
View 5 Replies
View Related
Feb 16, 2007
Hi all,
Hopefully I am posting this question in the correct forum. I am still learning about SQL 2005. Here is my issue. I have an access db that I archive weekly into and SQL server table. I have used the dst wizard to create an import job and initally that worked fine. field I have as the primary key in the access db cannot be the primary key in the sql table since I archive weekly and that primary key field will be imported several time over. I overcame this initally by not having a primary key in the sql table. This table is strictly for reference. However, now I need to setup a unique field for each of the records in the sql table. What I have done so far is create a recordID field in the sql table that is an int and set as yes to Identify (auotnumber). That worked great and created unique id for all existing records. The problem now is on the import. When I try to import the access table i am getting an error because of the extra field in the sql table, and the error is saying cannot import null value into this field. So... my final question is how can I import the access table into the sql table with one extra field which is the autonumber unique field? Thanks a bunch for any asistance.
Bill
View 7 Replies
View Related
Oct 12, 2000
Good afternoon one and all,
I have the folowing problem that I could use some help with :
I have an SQL server database acting as a back end to an access dbase. The SQL srv table contains over 32 million records and I am trying to use an append query (in access) to import a further 2 million records to the SQLSRV table. The append query fails with the message 'Insert on table bcdsales failed' followed by an ODBC timeout error message. I can append one record fine but a mass import fails.
Unfortunately i can't use SQL srv to do the import (internal policy says we must stick with access front end for now).
Any and all ideas welcomed.
TIA for your time and attention
Gurmi
View 2 Replies
View Related
Oct 26, 2006
Hi,
I have an Access 2003 front end that contains a number of linked tables on SQL Server 2005 SE. I recreated the application on a second network for testing and was able to use the Linked Table Manager to refresh the database connections. The problem is when I try and add another linked table. I select Link Tables from the menu and then when I select 'ODBC Databases()' from the 'Files of Type' list box, the Link window closes right away.
Any suggestions?
View 5 Replies
View Related
Oct 25, 2013
I linked an SQL server table into Access, but when I open the table in Access, no data shows. Do I need to set some permissions on the sql table?
View 1 Replies
View Related
Jun 22, 2007
I have used an access linked table to import data from a sharePoint list hosted on SharePoint 2007 server.
I hope someone else has done this. (1)I Does anyone know of any other way to pull data from a SharePoint 2007 list.
(2)Has anyone pushed data to a SharePoint List from a SQL Server table?
I tried doing that via the linked table but the destination task of the data flow task does not allow me to push data into the table.
(3) Has anyone designed an SSIS package to write data to an AccESS table from a SQL Server table?
Any help would be appreciated
View 4 Replies
View Related
Jan 26, 2007
Hey all,
I want to set a filter in my statement. Normally it is no problem, but this time I want to set a filter only on a part of the field.
For example:
In my table with ordernumbers, I have orders with are starting with 'FO', VO' (FO0001, FOO0002, VO0001, VO0002, ect etc)
I want to set a filter in my statement that I only wish to see the ordernumbers starting with 'FO'.
Any suggestions?
thx for helping me out again....
View 6 Replies
View Related
Feb 15, 2007
Hi,
I got a problem which looks like the same with a futher topic of me (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1156355&SiteID=1), but this one is a little bit more difficult.
I want to set a filter on a field, but the it must set a filter on a part of the field. I think it will be more clear with an example:
I have a list with ItemNumbers and ItemDescriptions.
ItemNo ItemDescription
1 Pineapple yellow
2 Cauliflower size 6
3 Orange sweet yellow
etc. etc.
Now I want that the user of this report can set a filter just by entering a part of the description. So, if he enters 'flower' he only see the cauliflower. If he enters 'yellow' he only see the pineapple and the orange, etc. etc. If a blank value is left, all the item must be shown.
Can some one help me out by solving this problem??
Thx a lot
View 3 Replies
View Related
Mar 20, 2007
Hello,
new question about an old topic (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1232451&SiteID=1):
I want to set a filter on a field, but the it must set a filter on a part of the field. I think it will be more clear with an example:
I have a list with ItemNumbers and ItemDescriptions.
ItemNo ItemDescription
1 Pineapple yellow
2 Cauliflower size 6
3 Orange sweet yellow
etc. etc.
Now I want that the user of this report can set a filter just by entering a part of the description. So, if he enters 'flower' he only see the cauliflower. If he enters 'yellow' he only see the pineapple and the orange, etc. etc. If a blank value is left, all the items must be shown.
After this, Jarret, suggest to me to insert the next code into my query:
where ItemDescription like '%' + @ItemDescParam + '%'
This helped, but I want to have 2 options extra:
1) The part of the description which the user inserts must be independent of capitals
2) It also have to be possible that the user inserts more than one part. For example "pine" and "fellow"
Can some one help me out?
Thx again
View 6 Replies
View Related
Oct 19, 2006
OS: Windows XP (SP2)
App: MS Access 2003 (SP2)
DB: MS SQL 2000 (SP4, 2040)
User is using MS Access linked table to query database (using ODBC). User can open the query in MS Access. However when the user goes to export the data to MS Excel format, the user receives the error message:
"Unexpected Error from External Database Driver (22)."
A trace on the db, reveals that the user process is attempting to log in to the server as 'Admin'. However, when the query with the linked table is first opened, the user is prompted for username/password (non Windows authentication).
Any ideas? I googled and found some stuff, but nothing directly related and most of what I found was supposedly fixed with SP1.
Any help appreciated. I am not an Access guru.
Regards,
hmscott
View 1 Replies
View Related
Nov 29, 2004
Hello!
Your advice might helps me a lot! I'm looking for the answer for days.
I would like to add 35 days to every date field in a table. I The table structure, and content is dynamically changing.
Is it possible?
Thanks,
norbi
View 1 Replies
View Related
Feb 21, 2007
well i guess we were all a newb once so here goes
something is wrong with the below it just doesnt like the date part
create table PLN_Workgroup_Resource
(
Dte date(ddmmyyyy),
Workgroup varchar(20),
AM_Hrs integer(3),
PM_Hrs integer(3),
EVE_Hrs integer(3)
)
;
View 4 Replies
View Related
Sep 12, 2007
Our phone system keeps a list of events, such as login and logout, which I'm doing a self join on to get the start and end times so I can calculate the time between the start and end of each event during a time period.
Then I stuffed the self joins into a couple views for the events I'm interested in...
The problem is that this makes the "end time" a calculated field, so when I use it as part of the filter it takes forever. I need to account for events ending within the time period, and events starting within the time period... so I need to filter on both the start and end time in the initial select. Filtering the start time first in a subselect, then the end time in the main select is quick but can lose things that started before the start time.
So how can I speed up the filtering on that calculated column?
Or am I going to have to get really creative with unions?
View 2 Replies
View Related
Sep 29, 2004
Is there an AutoType Datatype for Date field. just like the Identity property for an ID field.
It increments by 1 for each new record.
The same way if i add a record to the table can it automatically put todays date or date and time for the field date created in my table.
The reason is i am uploading the record from xml file(Using SQLXMLBULKLOAD) so i dont have a chance to mention on the front end code or in the XSD file.
Any help would be greatly appreciated.
View 1 Replies
View Related
Dec 18, 2013
I am pulling data from table which has date field to it. I am using below query to get the date
select ArrivalDate As[ARRIVE DATE, , Date, 0], ArrivalTime As[ARRIVE TIME, 4, String, 0] from ArrivalInfo
but i am getting date as 20130925 in format but i want date to be in 09/25/2013 (mm/dd/yyyy)..
View 2 Replies
View Related
Oct 24, 2007
hi friends
i wish to set a date data type to a column "Date". when i use datetime format, the values is inserted in the U.S. date & time format. i want the values to be in the british english format. i.e dd/mm/yyyy only and does not require time value. can any one help me to insert the date values in the british english format
regards..,
sekar.
View 3 Replies
View Related
Apr 24, 2007
Hello,
I am looking at writing a SP without much success which enables multiple filtering on one field. Something like below:
Input field: Product Description
So if the user enters: "Large Drill" OR "Drill Large" the same resultset will be returned.
SELECT * FROM products WHERE products.prod_desc contains both "Large" AND "Drill"
I guess there'll need to be a nested Select and loop to parse the space separated input field.
Any pointers would be appreciated.
Thank you
Lee
View 2 Replies
View Related
Jan 23, 2015
I have a field that is stored as a smalldatetime but I want to filter on that field only for the date. How do I ignore the time stamp and only go by the date?
View 3 Replies
View Related
Apr 13, 2007
I am currently writing a report that will use as one of the filters the date (in this case it is the date of service of a physician office visit).
however the DB developers included the date and the time of the visit in one field so my resulting data set contains 4/13/2007 4:30pm for example, so using an @date parameter as a filter on the data field doesn't work because when you run the report and enter the date in the parameter it doesn't return anything.
I am an SQL Report writer amateur so I am sure there is an easy fix, any and all help will be appreciated.
Mark
View 7 Replies
View Related
