Hi,
How to access the Package inside the Script Taks. for example
IF intStatus = 1 Then
//Execute Package1
Else
//Execute Package2
End IF
in the above sample what is the property to get the Package1 object in script
Thanks & Regards
Jegan.T
Hi
I have an application like fetching records from the DataBase(MS Access 2000) and results i have to use in Script Task. At present i have used the record fetching query,connection string in Script itself. I would like to use in Independently. Is there any Tools like (Control Flow Tools like Execute SQL Task) are there to fetch the result set from Acccess and can use the fetching results in Script Task....
Thanks & Regards
Deepu M.I
I have trying to execute the Sendmail task in my development envinorment i face this error..I have given the clear details error message below,Please have a look.
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.  System.Net.WebException: Unable to connect to the remote server  System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions ".Alternatively  i use the  SMTP connection to create the subscription as well,its working properly.
Here we are accessing SMTP connection manager as Virtually.Here in my client network we are using Macafee Anti virus ,We have excluded the Rsconfigration file in the excluded list.I dont know why this problem occures again using Sendmailtask in ssis?
Is it possible to get or set the value of MaximumErrorCount through a script task ?
I tried to assign User variables to MaximumErrorCount but could not succeed.
Any type of help will be appriciated.
Thanks
Gautam
Hi there
I have a a global variable for the package.
Now in script task of data flow I am trying to assign some value to it.
I have also defined same variable in Read/Write property of script task.
But at run time it gives me following error:
"The collection of variables locked for read and write access is not available outside of PostExecute."
How do we resolve this??
Thanks and Regards
Rahul Kumar
Hi,
By using ssis script can I make connection with MS Aceess Database.I want to establish the conection with data base and i want to manipulate the record via script code. Can any one help me for writing the script.
Thanks,
Can the DTS execute SQL task recognize a table in an Access database that is linked from another Access database?
I'm attempting to use a DTS Execute SQL task connected to Access1.mdb to make a new table in Access1.mdb that is using a Subquery from a linked table in Access2.mdb . (I know it sounds convoluded..) Its giving me an error in my FROM clause as if it can't recognize the linked table from Access2.mdb.
The reason why I'm doing this is that I'm not sure how to run an Access make table query from DTS that will overwrite the existing table in Access. I get an error that the table already exists.
Any Help?
Hi,
I sometimes come accross this error when I attempt to execute an isolated task in the control flow. What is funny is that I am still able to debug the package.
It eventually resolves after a while. What could it be?
Thanks
Philippe
TITLE: Microsoft Visual Studio
------------------------------
Access Denied. (Exception from HRESULT: 0x80030005(STG_E_ACCESSDENIED))
------------------------------
BUTTONS:
OK
------------------------------
Hi Everyone,
I created a script task that uploads a file to a HTTPs site. The script task works well and now I want to turn this script task into a custom component...
I'm having problems on how to call the variables I have in the package, I already locked them for reading, but how am I suppose to access them and how can I put their values into strings so I can easily call them in the WebClient.UploadFile method?
Also, I am very new to custom tasks in SSIS.. and would appreciate if anyone of you can send me something (code, link, etc.) of a very simple custom task without any form or properties, that I can try to study.
Basically, what I want my custom task to do is,
1. Read the varialbes in the package.
2. use the variables values as input in my WebClient.UploadFile("varURLstring", "PUT", "varFilePath")
as you can see, my custom task is really simple... but I'm a noob here and I don't know where to go.
Thanks in advance,
Kervy
Hi,
I have found that populating a data table from an SSIS variable (recordset) within a script task works fine first time round but produces no results subsequently:
Code Snippet
Public Class ScriptMain
Public Sub Main()
Dim ad As New OleDb.OleDbDataAdapter
Dim dt1 As New DataTable
ad.Fill(dt1, ReadVariable("myRecordset"))
'below returns count of 5500
System.Windows.Forms.MessageBox.Show("dt1 Count: " + dt1.Rows.Count.ToString)
Dim dt2 As New DataTable
ad.Fill(dt2, ReadVariable("myRecordset"))
'below returns count of 0
System.Windows.Forms.MessageBox.Show("dt2 Count: " + dt2.Rows.Count.ToString)
Dts.TaskResult = Dts.Results.Success
End Sub
Code Snippet
Private Function ReadVariable(ByVal varName As String) As Object
Dim result As Object
Try
Dim vars As Variables
Dts.VariableDispenser.LockForRead(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
result = vars(varName).Value
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
Return result
End Function
Anybody got any ideas?
Phil.
Hi,
for some reasons, I have to get access to the TaskHost during validation and execution. For example, I wanna know, if my task is within a container or not (parent is Sequence).
For the UI during design time, there is the TaskHost parameter. What about the execution time or during validation?
Any hints?
Thanks.
Thorsten
I have a component who's OnPreExecute event handler contains a Script Task. I would like to use this Script Task to access the component's properties. Can anyone provide script examples for doing this if this is possible?
View 6 Replies View RelatedI found this and have done everything it says to do, but I can't get the script to compile. Any ideas on how to run a access macro in SSIS??
Baiscally to execute an Access Macros in SSIS package we need to Download
Microsoft.Office.Interop.Access DLL from Office XP PIAs.
Download site
http://www.microsoft.com/downloads/details.aspx?FamilyId=C41BD61E-3060-4F71-A6B4-01FEBA508E52&displaylang=en
1) Extract the Microsoft.Office.Interop.Access DLL from Oxppia.exe
2) Drag and Drop Microsoft.Office.Interop.Access DLL to Global Assembley Directory(GAC) ie: C:WINNTassembly for Windows 2000 -- C:WINDOWSassembly for ( Win Xp and Win 2003)
3) Copy paste Microsoft.Office.Interop.Access to C:WINNTMicrosoft.NETFrameworkv2.0.50727 for Windows 2000 -- C:WINDOWSMicrosoft.NETFrameworkv2.0.50727 ( Win Xp and Win 2003)
4) Add DLL reference in the Script Task
5) Add the below Code
1) Create a New Project in SSIS
2) Drag and Drop Script Task
3) Copy Paste the code in script task editor
Imports Microsoft.Office.Interop.Access
Try
Dim objAccess As New Access.Application
objAccess.OpenCurrentDatabase("D:TestMacro.mdb", False) ' Add the Access File Path
objAccess.DoCmd.RunMacro("Macro1") ' Replace Macro1 with the name of your macro
objAccess.CloseCurrentDatabase()
objAccess.Quit(Access.AcQuitOption.acQuitSaveNone)
objAccess = Nothing
Catch ex As Exception
System.Windows.Forms.MessageBox.Show(ex.ToString())
End Try
Dts.TaskResult = Dts.Results.Success
Hi!
I have an sproc that gives an xml result set. I want to save this to a file but by using ssis and script task. Now, I do exec usp_myProc in execute sql task and get the result as xml. (I can get it as result set too but niether has worked). Now I pass this variable to my script task User::XRset.
In the script task I create a file and then I want to write xml result of User::XRset to my file. I am at loss.
Hi all,
I have an error when a package is trying to execute a SubPackage using the "Execute Package Task". I have this problem for all packages that are running sub packages.
The packages are stored in the DTSPackages folder of the SQL Server installation folder.
The master package is called from an Event Handler on a document library in MOSS 2007.
The account from the Sharepoint Application Pool has Full Control on the DTSPackages folder.
What am I missing ?
Hi,
I'm trying to simplify the deployment process of my project. I already had some troubles with the config files but lets say I solved that issue. I'm going to read a flat file and set the variables of my packages from this file. I was thinking to use a Script Task to do that but I will need to copy this task in every package (I have at least 30). So if I want to make some change this will be painful.
Then, I came up with the idea of creating a Custom Task called Config File Task. I'm working on this but I got stuck trying to get the variables from the package that is running my Config File Task.
This is the code I had in the Script Task:
Dim streamReader As New StreamReader(Dts.Variables("ConfigFilePath").Value.ToString)
Dim line As String
Dim lineArray As String()
Dim variableName As String
Dim variableValue As String
Dim readConfigurations As Boolean = False
While (streamReader.Peek() <> -1)
line = streamReader.ReadLine()
If line = "[CONFIGURATIONS]" Then
readConfigurations = True
ElseIf line = "[/CONFIGURATIONS]" Then
readConfigurations = False
Else
If readConfigurations And line <> "" Then
lineArray = line.Split("|".ToCharArray())
variableName = lineArray(0).Trim()
variableValue = lineArray(1).Trim()
If Dts.Variables.Contains(variableName) Then
Dts.Variables(variableName).Value = variableValue
End If
End If
End If
End While
Dts.TaskResult = Dts.Results.Success
All I want to do is set the variables that exists in each package from the config file. In my UI Class (ConfigFileTaskUI.cs) I can have access to the variables via the TaskHost which is passed as an argument of Initialize() method.
Any thoughts? I'd really appreciate some help!
P.S. I've been working on this for 2 days!
Hi,
I created a Custom Task which it has a Property called ConfigFilePath. I'm overriding the Validate() method from Task. I want to throw an error if my property ConfigFilePath is empty and if the expression for this property is empty. So far, I can check if the property is empty but I don't see how I can access the Expressions Collection of my Custom Task.
Any thoughts? I'd appreciate your help.
Note: this applies to SQL 2012 only. I'm using the project deployment model in SQL SSIS 2012
I have a script task inside the SSIS package that renames some files on a domain share. (mydomainmyfileshare)
The database owner is a domain user (mydomainsvclogin)
I start the package from a stored procedure like so:
EXEC [SSISDB].[catalog].[start_execution] @execution_id
When the package is deployed to my local machine, it executes without error.
When it is deployed to a remote server on the same domain (2012), I get an error:
Access to the path mydomainmyfileshare is denied.
The report log show that the caller is mydomainsvclogin. I added some informational logging of my own and I see that the variable System::UserName is also mydomainsvclogin
I logged on to windows as mydomainsvclogin and verified that I can modify/delete/change files on mydomainmyfileshare
On older packages, I used credentials and proxy accounts to set up access to domain resources.
How do you specify the account (a domain account) that will access domain resources in an SSIS 2012 package ?
I have used an access linked table to import data from a sharePoint list hosted on SharePoint 2007 server.
I hope someone else has done this. (1)I Does anyone know of any other way to pull data from a SharePoint 2007 list.
(2)Has anyone pushed data to a SharePoint List from a SQL Server table?
I tried doing that via the linked table but the destination task of the data flow task does not allow me to push data into the table.
(3) Has anyone designed an SSIS package to write data to an AccESS table from a SQL Server table?
Any help would be appreciated
I have an Access 2.0 database that holds call data on a mapped drive. I am running MS SQL Server 2000. I can open it and view the records inside. I can even run the query below and get results, if I removed the CallDate and CallTime parameters.
SELECT CallDate, CallTime, Mid(CallRecordData, 68, 3) AS Extension, 'I' AS Direction, Mid(CallRecordData, 34, 11) AS Called,
Val(Mid(CallRecordData, 18, 2)) + Val(Mid(CallRecordData, 21, 2))/ 60 AS Minutes, Val(Mid(CallRecordData, 21, 2)) AS Seconds
FROM CallRecords
WHERE (CallDate = ?) AND (CallTime >= ?) AND (CallTime < ?) AND (Mid(CallRecordData, 30, 1) <> '9')
When I preview in the Transform Data Task, I get:
Package Error
Error Source: Microsoft JET Database Engine
Error Description: No value given for one or more required parameters.
When I look at the parameters, they are listed. I check their values, and they have the appropriate values (DateCalled, String, 07/14/2005) (StartTime, String, 06:30) (EndTime, String, 07:00)
When I run it in the build query or in Access with a linked table to the source, I can enter the values when asked for them and it works.
Thanks for any help you can provide.
In my ssis 2012 package, I have a 'object' type variable with some table like records. I want to do some SQL operations like insert/update on the records in another table based on this 'Object' type variable records. Basically I want to use a MERGE statement with another physical table with the records in the 'Object' type variable.how to map/use the Object type variable in Execute sql task.I am not good in script task. How to utilize this Object variable in a Execute sql task? Â
View 9 Replies View RelatedOK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
Hi ALL,
Getting Access Denied To FileName Error When Using the Execute Sql Task (With File Connection) into a Foreach Loop Container.
Please Note :
I have a folder containing .sql files. I have to dynamically loop through the files and send them as a File connection Folder to the Execute Sql Task.
When I run this Package I am getting the follwoing error :
[Execute SQL Task] Error: An error occurred with the following error message: "Access to the path 'C:ProjectsFuzzy Lookup DataFlow ExampleScripts' is denied.".
Also I have logged in to the machine as Administrator and to Sql Server with sa.
Please help.
Thanks.
Regards,
Salil
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies View Related
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
I am using the "Transfer SQL Server Objects Task" to copy some tables from database A to database B including data.
The tables, primary key constraints, Foreign key, data and all transfers nicely except for "DEFAULT CONSTRAINTS" on the tables.
I have failed to find any option in the "Transfer SQL Server Objects Task" task to explicitly say "copy default constraints". So I guess logically it should happen automatically but it doesn't. I hope it is not a bug :-)
Any option anyone knows will help.
Thanks.
I am using SQL 2005 SSIS. I am joining several large tables and then the move result into another table in the same database.
I would like know which method is faster:
Use Execute SQL Task to insert the result set to the target table
Use the Data Flow Task to insert the result set to the target table. (Use OLE DB source to execute SQL command and then use the SQL destination)
Could you tell me why then other is slower?
Thanks.
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies View RelatedIn the Control flow tab, I have an Execute SQL Task that outputs full Result set into a variable of an object type. Now how can I write the contents of the Full Result Set into a text file using Script Task. I also want to format the following way while I output into a file:
Column Name 1 : Column Value
Column Name 2: Column Value and so on
I tried writing the contents of the Object Variable into a file, but the file had an output of single word: System.__ComObject.
Code for Writing the Full Result Set into a Text File
Dim RSsqloutput as String = Dts.Variables("objVariable").Value.ToString
Dim strVal as String = "File completed on " & Now() & vbCrLf & "------------------------------------------------------" & vbCrLf
oLogFile.WriteAllText("C:MyFile.txt", strValue)
oLogFile.WriteAllText("C:MyFile.txt", rsSQLOutput)
I went through this link that explains how to write XML Result Set into a File, But this doesn't help as it writes in XML format.
Would you please give me a hint of code how I can go upon.
In short, does the €œTransfer SQL Server Objects Task€? support distributed transactions?
In trying to use a €œTransfer SQL Server Objects Task€? in a container using a transaction on the container. The task is set to support the transaction. It is setup to copy table data from several tables from a non-domain server (sql server 2000) to a domain-based server (sql server 2005). I get an error stating, €œThis task can not participate in a transaction€?.
I am wondering if it means exactly what it says €“ this task in SSIS can€™t participate at all. Or does it mean that it won€™t in this scenario for some reason. I attempted a simple copy of data from mssql 2005 to mssql 2005 (same server) and the task still failed). MSDTC appears to be running properly on my machine and such (I can do a simple distributed transaction across linked server to the 2000 server in Query Analyzer (QA)). Also, MSDTC appears to be working on both servers with distributed transaction query tests in QA.
Here€™s the error info€¦
SSIS package "Development BusinessContacts and Products Migration.dtsx" starting.
Information: 0x4001100A at Copy BusinessContacts Data: Starting distributed transaction for this container.
Error: 0xC002F319 at Copy BusinessContacts database table data 1, Transfer SQL Server Objects Task: This task can not participate in a transaction.
Task failed: Copy BusinessContacts database table data 1
Information: 0x4001100C at Copy BusinessContacts database table data 1: Aborting the current distributed transaction.
Information: 0x4001100C at Copy BusinessContacts Data: Aborting the current distributed transaction.
SSIS package "Development BusinessContacts and Products Migration.dtsx" finished: Failure.
The program '[4700] Development BusinessContacts and Products Migration.dtsx: DTS' has exited with code 0 (0x0).