Hi everybody, I've a 2003 server which I've installed on SQL Server Express Edition. I've 2 partitions. My Problem when I want to restor a backup from d:/, an error indicating me that the SQL can't access to backup file and it access denied ???!!.
Does anyone have an idea about this problem.
Best Regards.
Hi everybody, I've a 2003 server which I've installed on SQL Server Express Edition. I've 2 partitions. My Problem when I want to restor a backup from d:/, an error indicating me that the SQL can't access to backup file and it access denied ???!!.
Does anyone have an idea about this problem.
Best Regards.
I created a maintenance plan to do the backup on my machine and created a job using CmdExec command: copy e:\*.bak \remoteackup but the copy job fail each time.
I know that command works fine when i run it from a batch file but does not seem to work from the job in sql server. I try to map the remote machine to a drive and used the drive in the copy statementcopy e:ackup*.bak q:ackup but it still does not work. Is there something I need to do inside sql server?
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
I got full backup on daily schedule its taking more space on Drive because each file has more than 25GB.I am using SLQ server 2008R2 so I'm looking to take the backup with compression instead of uncompressed Backup. What are the impacts of compressed backup. Is there any problems with compressed backup while restoring the backup file.
View 8 Replies View RelatedI have recently upgraded to SQL2014 on Win2012. The Access front end program works fine.
But, previously created Excel reports with built in MS Queries now fail with the above error for users with MS 2013. The queries still work for users still using MS 2007.
I also cannot create any new queries and get the same error message. If I log on as myself on the domain to another PC with 2007 installed it works fine, so I don't think it is anything to do with AD groups or permissions.
When running the following statement in SQL 2005, I get the error message "Access is denied":
exec master.dbo.xp_cmdshell 'TYPE \SERVER-BSHAREFILE.TXT'
The following are true about the network:
The SQL Server is installed on SERVER-A.
SERVER-A and SERVER-B are Windows 2003 servers on the same Windows 2003 domain.
The SQL Server and SQL Server Agent services are running under the domain account SQLSERVICE.
SQLSERVICE is a member of the Domain Admins group.
The Domain Admins group is part of the local Administrators group on SERVER-B.
The SQLSERVICE account has also explicitly been given Full Control to the folder referenced by \SERVER-BSHARE
xp_cmdshell use has been enabled on the SQL Server.
If I run the following command in SQL:
exec master.dbo.xp_cmdshell 'whoami'the following is returned: DOMAINSQLSERVICE
If I change the command to access the c: drive instead of a network drive, it executes successfully.
Can anyone shed some light on why I still cannot access any of the files in this folder using xp_cmdshell?
Tim
When i am trying to start our hospital software based on SQL server 2000, it shows Following Error.Search Condition is not valid, (DBNETLIB) Connection Open (connect()). SQL server does not exist or excess denied. Due to Fetch data.I run our software in Windows 8.1, while it smothly runs in previous version of Windows XP and 7.
View 2 Replies View RelatedHI everybody,
I have a problem in restoring a backup. In the restore command there is one option called <file> = 'file_number'. Where do we get this 'file_number'?.
tks in advance
Srini
Hi Everyone, I was prototyping a DB and made a backup of all the files in the data directory of sql server, thinking that I would be able to restore the system from another installation when I made it to the US. I have the cd with the archives on and a full backup of the DB I want but I have no idea how to get sql server to initialise it.
Any ideas???
Steve
Guys, i've 1.6 GB of backup size and it takes 1 hour for this backup to get restored over a SCSII 10,000 rpm.
Is it normal. How can i make the restore faster.
It takes only 5-10 mins to take the backup however.
I am restoring the full backup, no differential or log file.
Howdy!
I Have a full database backup of the database aaa ON a server xxxx. I want to restore the same back upto as a database aaa ON another server yyyy.For to achieve this do I need to make the database aaa ON server xxxx.
How can I do that.Please help me in this issue.
Thanks.
I used backup and restore to upgrade a database from sql 2000 to sql 2005. Is it necessary to create the mdf and ldf on the new server at the time of restore under options or should I copy them to the new server in the data folder? I am new and not quite sure what the log files hold.
Thanks
Hi,
I am using SQL server 2000. When I want to restore a backup database from the disk. I use the Enterprise Manager tool to restore database. From there I checked Restore database and select from the first backup to restore. Do I need to backup the transaction log after? Or this does all of it?
Hi,
I have a problem. I create a backup from a DB named Prueba (in full mode). But when I try to restore it in a new server the Prueba backup is loaded, and appear a message that said so. But in the DB list next to his name(Prueba) appear a "(Restoring)" ... The DB is not so big (i didnt know why is taking so long or whats the prblem) and i cannot do anything whit it because it doesn t show the tables or any info.
Thanks for the help ..
I really thanks.
Hernan
Hi there, I'm from Argentina. I have an SQL backup made with SQL Server 2005 Developer Edition. I want to restore this backup into a Server with SQL Server 2005 Express Edition. Can this be possible? Thanks.
View 3 Replies View RelatedHi,I am working in a sql server 2000 environment but my customer uses sql server 7. Is it possible to use backup and restore to transfer the database or should I set up a sql server 7 for development?The database only contains tables and views...ThanksKoen
View 1 Replies View RelatedPls explain how to backup and restore data on SQL Server with a CD drive instead of tape drive.
This is urgent.
Thanks.
I want to create a database that is identical to one I currently have for testing purposes. I took a backup and tried to restore it to
another server to actually create the database. It wouldn't work, then I created the database on that server and gave it the exact
name and file layout (dbid was different) and tried to restore the backup to the newly created database. Still would not restore.
I am using SQL 7 for backkup and restore. The backup device backs up to disk on the servers. What I am doing wrong?
Hi
I have tried to restore a backup. I have the next error:
Database that you have to restore have a diferent ID. (54) that it's currently use in this server (52).
How can i resolve it?
I'm trying to restore databases to a backup server from a production server. This is the message I received. I'm fairly new to this. I haven't touched SQL Server in over a year and wasn't very proficient back then either. Any help would be greatly appreciated!
TITLE: Microsoft SQL Server Management Studio
------------------------------
Restore failed for Server 'ULTIPROBAK'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The backup set holds a backup of a database other than the existing 'HRMS_GLOBALDATA' database. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
-Jeff
Hi all,
My first post on these forums and I'm hoping someone can please help me before I pull all of my hair out.
I'm currently working on the redevelopment of a website. The old one was written in ASP and we're going to totally redo the whole thing. As a lot of the content was dynamic I want to fire up the old site on my laptop to browse and pull content from. I have a backup of the entire website which I have put under a fresh IIS install. I also have a backup of the MSSQL database. I have restored this to the local machine and can view it using the SQL Server Management Studio. The problem is that I think I am having lots of trouble synching the users/permissions for it. We don't have a backup of the Master databases so I am stuck with what I can extract from the site backup and web code.
Trying to load the old index.asp I get either of these error messages quote:'Login failed for user 'Username'. The user is not associated with a trusted SQL Server connection' or 'SQL Server does not exist or access denied.' depending on how I've played with the user permissions.
Please can someone help me sort this out so that the old ASP webpages can access the DB again? I'm used to mySQL/PHP so am struggling a bit to get this going.
-Edit-
Bit more info. Here are the connection details the site uses within an ASP page.
<%
dim Conn
'---------------------Create connection------------------------------------------------------
Set Conn = Server.CreateObject("ADODB.Connection")
Conn.Open "Driver={SQL Server};Server=MYSERVER;Database=dbTest;uid=dbTestUser;pwd=testpasssql"
%>
Cheers
PR
I used backup and restore to upgrade to sql 2005 from 2000. It went well but I didn't get the permissions change in time for the users to access the database today. The users were accessing the old server. I need to do another backup off the old server to the new server. Do I do a full backup to get the information for today's data or what? Will it restore a full backup override?
View 1 Replies View RelatedHi,
Im trying to restore the differential backup,I have to restore the full backup first and then restore the differential backup.Can any body tell me the code for this?
my program is like this
--for fullbackup
if type=D
begin
restore database databasename
from disk=path
end
--for differential backup
else if type=I
???
We have received a backup file that is 6G in size. The log file isabout 74G while the MDF is about 5 G when we restored. Is there a wayto run a SQL script to restore the .BAK file without restoring the logfile as we do not have enough space on the server.PS. We are running Sql2K5.Thanks!
View 1 Replies View RelatedI have a SQL backup that I created on SQL 2005 but need to restore it on a SQL 8.0 SP4 installation. I receive an error when I try to restore it. The error is :
Error 3169: The backed up database has on-disk structure version 611. The server supports version 539 and cannot restore or upgrade this database. RESTORE FILELIST is terminating abnormally.
Any ideas?
Hi all,
My question is:
If I need to restore a database when all I have is the backup file, do I need to recreate all the tables, or is it possible to restore into a new database ?
Is it possible to restore a sql server 2000 database into a sql server 2005 database ?
Thanks in advance.
i'm trying to set up one of the asp.net website starter kits and part of the process is to backup the sql express db and then import it into the sql 2005 at the web hosting account. it's not working and i'm wondering if there's any difference between the backups they make. the sql express makes a file with a .bak extension and the sql 2005 at the host makes a file with a .sqlbak extension. i was assuming that was just a naming thing and not a structural thing but the host's tech support has said:
"This sort of thing happens when the database being imported is not properly formatted. You can try downloading and using sql express from microsoft to see if you can do it manually, but most likely you will need to save your database again properly set for import to an mssql server rather than however you did."
all i had done was rename the .bak file from express to .sqlbak as that was the choice for backup files.
i will note that it also failed importing the .mdf, which works fine locally with the site but i did make some changes to it from the original that came with the starter kit.
should a backup file made with sql express (using sql management studio express, by right clicking on the file and choosing tasks > backup) normally be importable by sql 2005?
or, i suppose, does it make sense that a db that works fine locally with sql express (within a visual web developer express project anyway) would actually be "formatted" in a way that would cause it to fail to import into sql 2005?
thanks much for any assistance.
Can we restore a SQL 2k Backup in SQL Server 7.0 database?
Will there be any issues on it?
Hi All,
I am trying to restore transaction log using T_SQL:
restore log transfer from transfer_log with file = 2 ,norecovery
and also I was Trying--
restore log transfer from disk = 'c:mssql7ackupransfer_log.dat' with file = 2,norecovery
I am getting this error Message-
Server: Msg 4306, Level 16, State 2, Line 1
The preceding restore operation did not specify WITH NORECOVERY or WITH STANDBY. Restart the restore sequence, specifying WITH NORECOVERY or WITH STANDBY for all but the final step.
Server: Msg 3013, Level 16, State 1, Line 1
Backup or restore operation terminating abnormally.
Any Ideas,Please Let me Know ASAP
Thank You ALL--
I am trying to replicate a client's environment on my home development machine in order to develop some reports. At the client (SQL 6.5) I did a complete backup to a .dat file. How can I restore from this file into my home (SQL 7) server to create a duplicate database?? I tried restoring from a device, specified the file, but I get an "not a valid tape format ....." error. Help!
View 5 Replies View RelatedHello,
I'm in trouble, I have just dropped a table from a sql dbase and now need to recreate it. I have no backup and I am panicking!!! I need to know if I can recrreate them .
Any and all help appreciated
DVNC
Hi Everybody,
Our branch office in Europe has sent full 'backup' file of capacity 25GB.
I have to restore this backup to our database. Their database is 'Candidate'
and our database is 'client'. Both these databases have different logical
names and physical names.
The following Batch script only I hv executed,
RESTORE DATABASE Client
FROM DISK = 'd:dumppaw01dump.bak'
WITH MOVE 'candidatedata' TO 'e:mssqldataclient_data.mdf',
MOVE 'candidatelog' TO 'd:mssqllogclient_log.ldf',
REPLACE
Can anybody tell me, what I have executed above is correct or not. Now
restoration is going on for more than an hr. Still it is going on. Is there
any other way to restore this backup set very fastly.
Our server has got very good hardware setup. Good amount of hard disk space.
4GB RAM Memory. Running 4 processors. No other service is running apart from
SQL Server. Right now nobody is accessing the server.
How long it will take to restore this backupset?. This is urgent please.
Any help would be appreciated.
tks in advance,
Sri