Access Read Only Variables In Script Component In A Dataflow
Dec 6, 2006I have a set of comma separated variables in a Script Component list. I want to access them in Script code and use them to build string in the code.
View 9 Replies
ADVERTISEMENT
Script Component As Source: The Collection Of Variables Locked For Read Access Is Not Available At This Point.
Jan 17, 2008Hello, I am trying to configure a Script Component as a data source. Although this should be a simple exercise, I am running into a problem.
My control flow contains a Foreach Loop with a file iterator. The Directory Expression of the Foreach Loop Editor is supplied by an expression mapped to a package level variable called inputdirectory. The FileNameRetrieval Expression is mapped to a package scoped variable called filename.
My data flow is encapsulated by the Foreach Loop, and contains a Script Component as Source for the Data Flow Source, and a Flat File for the Data Flow Destination. The contents of the Script Designer are as follows:
Code Block
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports System.IO
Public Class ScriptMain
Inherits UserComponent
Dim thisFileDate As Date
Dim thisFileName As String
Dim thisFilePath As String
Public Overrides Sub CreateNewOutputRows()
thisFileName = ReadOnlyVariables("filename").Value.ToString()
thisFilePath = ReadOnlyVariables("inputdirectory").Value.ToString()
thisFileDate = File.GetCreationTime(thisFilePath & "" & thisFileName)
FileSpecBuffer.AddRow()
FileSpecBuffer.FileName = thisFileName
FileSpecBuffer.FullPath = thisFilePath & "" & thisFileName
FileSpecBuffer.CreateDate = thisFileDate
End Sub
End Class
When I debug the package, I get the following error:
The collection of variables locked for read access is not available at this point.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponent.get_ReadOnlyVariables()
at ScriptComponent_67311120e6eb4162a3ea1f70847f04de.ScriptMain.CreateNewOutputRows()
at ScriptComponent_67311120e6eb4162a3ea1f70847f04de.UserComponent.PrimeOutput(Int32 Outputs, Int32[] OutputIDs, PipelineBuffer[] Buffers)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
My googlefu fails me at reconciling this. I have read various posts about changing the line ReadOnlyVariables("filename").Value to ReadWriteVariables("filename").Value, and handling the buffer assignment in PostExecute. The problem is that all examples shown are either for Script Component as Destination or Script Component as Transformation. I have tried playing with the Custom Properties in the Script Commponent set the ReadOnlyVariables and ReadWriteVariables, using a PreExecute method, a PostExecute method, all with different errors returning. I'm at a loss here. Could anybody provide me with a simple working example so that I can correctly populate my output buffer in the context of Script Component as Source?
I fully understand that I could just run a Script Task Using System.IO.Directory, and System.IO.File, but I really want to make this package work in the manner I've described. Any help would be appreciated.
Thanks,
John T
Global Variables And The Script Component In DataFlow
Apr 12, 2006I can't find anything on how to get to a global variable in a script component in the dataflow. I can get to it in a script task with no problem by using dts.variables but i doesn't appear you can do the dts variables in the script component.
I did add it to the readwrite variable list but I haven't been able to access it.
Stand Alone Custom Dataflow Component Trying To Access MainPipe...
Feb 4, 2008Hi,
I've created a stand alone custom dataflow component in VB and I need to set up the connection to the Input and Output components and instantiate it. The only way I've seen this done is to create an entire package and Task then use the TaskHost wrapper object to instantiate the Mainpipe (IDTSPipline90 interface) so that you can create the IDTSPath90 interface and setup the connection to the input and output components...
After all that, all that I would like to know is whether it is possible to instantiate the mainpipe interface without creating a package programmatically? I've seen something Darren Green put in an answer to a thread, about accessing the Mainpipe interface in the UI, to the effect that you can access it through IServiceProvider using the interface IDTSPipelineEnvironmentService - I think that's it... But I'd like to know if there is a more straightforward route to instantiating and accessing the Task or data flow directly?
Thanks in advance,
Will.
How To Access Variables In Script Component?
Dec 18, 2007Hi,
How can I set a variable value in a Script Component?
This syntax does not work:
Dts.Variables("myVariable").Value
Pls help.
Thanks
Reference To Preceeding Component From Custom Dataflow Transformation Component
Mar 30, 2006I am writing a custom dataflow transformation component and I need to get the name of the preceeding component.
I have been trying to find a way to get a reference to the Package object, MainPipe object or IDTSPath90 object (connecting to the IDTSInput90 of my component) from my component because I think from there I can get to the information I want.
Does anyone have any suggestions?
TIA . . . Ed
How To Access Inputs As Variables In Script Component Script In SSIS
Jan 17, 2008
I am on a learning project where I need to take Inputs to the Script Component from an OLE DB Source. Then I am supposed to be able to access these input columns in my Script. My Script code is in VB.NET.
My questions is:
1) How do I access these input variables in my script?
2)How to assign outputs to the output columns which will go to two separate OLE DB Destinations?
Thanks,
MissGee
Read Text File From SQL Server, Read Its Content, And Load It In RichTextBox (Related Component: Context.Response.BinaryWrite(), And StreamReader)
Nov 26, 2007OBJECTIVE: I would like to read a text file from SQL Server 2000, read the text file content, and load its conntents in a RichTextBoxTHINGS I'VE DONE AND HAVE WORKING:1) I've successfully load a text file (ex: textFile.txt) in sql server database table column (with datatype Image) 2) I've also able to load the file using a Handler as below: using System;using System.Web;using System.Data.SqlClient;public class HandlerImage : IHttpHandler {string connectionString;public void ProcessRequest (HttpContext context) {connectionString = System.Configuration.ConfigurationManager.ConnectionStrings["NWS_ScheduleSQL2000"].ConnectionString;int ImageID = Convert.ToInt32(context.Request.QueryString["id"]);SqlConnection myConnection = new SqlConnection(connectionString);string Command = "SELECT [Image], Image_Type FROM Images WHERE Image_Id=@Image_Id";SqlCommand cmd = new SqlCommand(Command, myConnection);cmd.Parameters.Add("@Image_Id", System.Data.SqlDbType.Int).Value = ImageID;SqlDataReader dr;myConnection.Open(); cmd.Prepare(); dr = cmd.ExecuteReader();if (dr.Read()){ //WRITE IMAGE TO THE BROWSERcontext.Response.ContentType = dr["Image_Type"].ToString();context.Response.BinaryWrite((byte[])dr["Image"]);}myConnection.Close();}public bool IsReusable {get {return false;}}}'>'>
<a href='<%# "HandlerDocument.ashx?id=" + Eval("Doc_ID") %>'>File
</a>- Click on this link, I'll be able to download or view the file WHAT I WANT TO DO, BUT HAVE PROBLEM:- I would like to be able to read CONTENT of this file and load it in a string as belowStreamReader SR = new StreamReader()SR = File.Open("File.txt");String contentText = SR.Readline();txtBox.text = contentText;BUT THIS ONLY WORK FOR files in the server.I would like to be able to read FILE CONTENTS from SQL Server.PLEASE HELP. I really appreciate it.
Custom Dataflow Component---add New Column To Buffer
Aug 14, 2007This is trivial I'm sure but I'll be dogged if I can find someone who mentions how to do it. I am attempting to develop a Data Flow Transformation that appends a new column (a string value) into the current stream.
I have found plenty of references on how to replace an existing column but I'd really like to just add my new column in there. It doesn't need to be configurable, it can be a static column name. I'll take a solution that allows the column name to be set at design time, don't get me wrong but the magic I'm looking for is how to implement a new column in a stream.
Yes, I am well aware of the derived column task but I will be replacing a few hundred instances and I'd much rather just drag an item onto the designer than to drag a derived column, double click it, type in the column name, set the expression and then set the datatype, etc.
Anyone spare a moment to enlighten me?
Pardon the lack of formatting, this BB doesn't play with Opera (I know, I'm a heretic)
using System;
using System.Collections;
using System.Runtime.InteropServices;
using Microsoft.SqlServer.Dts.Pipeline;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
using Microsoft.SqlServer.Dts.Runtime;
namespace Microsoft.Samples.SqlServer.Dts
{
[
DtsPipelineComponent
(
DisplayName = "Nii",
Description = "This is the component that says Nii.",
ComponentType = ComponentType.Transform
)
]
public class Nii : PipelineComponent
{
public override void ProcessInput(int inputID, PipelineBuffer buffer)
{
if (!buffer.EndOfRowset)
{
while (buffer.NextRow())
{
try
{
// do something here to
}
catch (Exception e)
{
ComponentMetaData.FireInformation(0, ComponentMetaData.Name, "There was an error on row " + buffer.CurrentRow.ToString() + ". The error is: " + e.Message + " : " + e.Source + " : " + e.StackTrace, "", 0, ref fireEventAgain);
}
}
}
}
}
Custom Dataflow Component: How Do You Make Properties Editable?
Feb 13, 2007I have a custom component that takes in unicode stream and converts it to ascii text. However I would like to make my default string length and code page editable in the standard GUI editor. Right now I can set the default to 1000 characters, but when I try to change it, it says "Property value is not valid"
Any ideas?
Thanks!
My Own Dataflow Component. How Make A Property With List Of Predefined Values?
Mar 24, 2007I am creating of may of dataflow component.
How make a property with list of predefined values?
Thanks in advance.
How Can I Initialize Runtimeconnection For My SSIS Dataflow Component From My IDtsComponentUI Correctly?
Jul 30, 2007I am developing SSIS dataflow component.
Extended user interface is based on class IDtsComponentUI. Connection properties are created in both standart and my extended editor (Extended user interface). To set up designtime connection I use standart and my extended editor.
A main PipelineComponent component have two runtime connection:
IDTSRuntimeConnection90 adoConnection1 = ComponentMetaData.RuntimeConnectionCollection.New();
adoConnection1.Name = "Connection 1";
IDTSRuntimeConnection90 adoConnection2 = ComponentMetaData.RuntimeConnectionCollection.New();
adoConnection2.Name = "Connection 2";
----------------------------------------------------------------------
IDTSComponentMetaData90 dtsComponentMetaData; // current designtime component
....
In IDtsComponentUI I use follow fragment of code (for example):
_dtsComponentMetaData.RuntimeConnectionCollection[0].ConnectionManager =
Microsoft.SqlServer.Dts.Runtime.DtsConvert.ToConnectionManager90(_connections[0]);
to set up IDTSRuntimeConnection90[0] connection using connections from a current package. After this operation
the RuntimeConnectionCollection[0] is not null within the method PipelineComponent.AcquireConnections((object transaction)). ! But during next launching of Extended user interface the RuntimeConnectionCollection[0] is null within the method PipelineComponent.AcquireConnections((object transaction)).
Why do I lose the connection? And why the connections which set up in my Advanced editor do not save in standart editor?
Thanks in advance.
Dates In Slow Changing Dimension Dataflow Transformations Component
Mar 31, 2008I€™m trying to populate a table with fields of date type [DT_DATE] using the Slow Changing Dimension Transformation component. When I add the date fields to the component it would not build the stream. The wizard fails and tells me the date fields are not of the same type. The fields in the destination table are of type €œdate€? and the input columns are of type [DT_DATE]. Am I missing something?
View 3 Replies View RelatedHow Can I Bind Assemblies Of DEFINITE Version Of SSIS Dataflow Component To A Package.
Sep 4, 2007I have several versions of one SSIS Dataflow component. I need to bind some of them( definite version) to my SSIS package. How can I do that?
Thanks in advance.
Enabling Expression Builder For Custom SSIS DataFlow Source Component
Mar 13, 2007Hi,
I have implemented a custom source component that can be used as the data source in the Data Flow task.
I have also created a custom UI for this component by using the IDtsComponentUI .
But my component does not have the capability of setting the custom properties via the DTS Variables using the Expression Builder.
I have looked around for samples on how to do this, but I can only find samples of how to do this for custom Control Tasks, i.e. IDtsTaskUI.
My question is, How can implement the Expression Builder in my custom Source component + custom Source UI. Or do you know of any samples which I can look at.
Thank you,
Jameel.
Why Dataflow Component Doesn't Appear In The List Of SSIS Data Flow Items?
Sep 5, 2007Hi,
I developed SSIS Data Flow Component and placed dll file into the DTSPipelinecomponents. Then I registered the component in the GAC.
But when I try to add the required component into toolbox that there is not this one in the list of SSIS Data Flow Items. What does it mean?
Thanks in advance.
Integration Services :: Dataflow Task Read CSV File And Insert Data To Table
Apr 29, 2015I've a dataflow task on For Each Loop container at control flow of SSIS package. This For Each Loop container reads the CSV files from the specified location one by one, and populates a variable with current file name. Note, the tables where I would like to push the data from each CSV file are also having the same names as CSV file names.On the dataflow task, I've Flat File component as a source, this component uses the above variable to read the data of a particular file.
Now, here my question comes, how can I move the data to destination, SQL table, using the same variable name?I've tried to setup the OLE DB destination component dynamically but it executes well only for first time. It does not change the mappings as per the columns of the second CSV file. There're around 50 CSV files, each has different set off columns in it. These files needs to be migrated to SQL tables using the optimum way.
Which is the best way to setup the Dataflow task for this requirement?Also, I cannot use Bulk insert task here as we would like to keep a log of corrupted rows.
Read/Write For Variables
Aug 3, 2007Hi,
I am using a Script Component and I have a Read/Write Variable varStatusCase (as assigned in the Custom Properties of my Script Component). I used this inside my script to get a specific value. However, when I ran it I get this error:
The collection of variables locked for read and write access is not available outside of PostExecute.
How do I repair this?
Thanks,
cherriesh
How To Fix DT_Text And DT_NText Read Only In Script Component
Nov 13, 2006I have a script component that I have written and works as long as the Output columns on the script are string types. When I change the output column type to text (since the size could be essentially unlimited) it gives an error in the script component that the property is read only.
Here is the code line that fails with Property Payments is read only.
Output0Buffer.Payments = fieldValues(i)
If I change the column payments to DT_Wstr it works without issue, but I want to use text incase the value is large.
Here is the error if you try to run the actual script even though I know it has an error.
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Data Flow Task [Script Component [85]]: Error 30526: Property 'Payments' is 'ReadOnly'.
Line 86 Column 13 through 69
Error 30526: Property 'Ops' is 'ReadOnly'.
Line 155 Column 13 through 65
Error at Data Flow Task [Script Component [85]]: Error 30526: Property 'Payments' is 'ReadOnly'.
Line 86 Column 13 through 69
Error 30526: Property 'Ops' is 'ReadOnly'.
Line 155 Column 13 through 65
Error at Data Flow Task [DTS.Pipeline]: "component "Script Component" (85)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Using Variables In Data Flow Script Component
Jan 12, 2006I have a package variable that I set via an ExecuteSQL task. I want to reference it in a data flow script component. In the Script component I enter the variable into the ReadOnlyVariables collection, then in the script I reference it as Me.Variables.var. (E.G. counter = Me.Variables.var)
I'm getting errors when the data flow starts:
Error: 0xC0047062 at Provider, Set Surrogate Key [4261]: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.SqlServer.Dts.Pipeline.ReadWriteVariablesNotAvailableException: The collection of variables locked for read and write access is not available outside of PostExecute.
I have no problem referencing other variables that I have in DerivedColumn transformations. I've tried putting the variable in the ReadWriteVariables collection but I get the same error. I don't understand why this is so difficult. Please help.
Passing Variables To Data Flow Component
Apr 27, 2006Hi,
I've read the various posts and articles regarding this matter, but I seem to have problems getting to work:
In my control flow, I start by declaring a variable named "LastJobLedgerEntryID", to identify the records I need to add to the stage. From there I would like to use this variable in the source component in my dataflow, i.e.:
"SELECT [Entry No_],[Job No_],[Posting Date],[Document No_],[Type],[No_],[Description],[Quantity],[Direct Unit Cost],[Unit Cost],[Unit Price],[Chargeable],[Job Posting Group],[Global Dimension 1 Code],[Global Dimension 2 Code],[Work Type Code] FROM mytable WHERE [Entry No_] > " + @[User::LastJobLedgerEntryID]
But this fails? I should note that the variable LastJobLedgerEntryID is stored as a int32, and with the default value of 0
Could someone please help me with this?
Thanks in advance!
Weird Behavior Using Variables In Script Component
Mar 27, 2007I have a script component in a data flow that is exhibiting some strange behavior. In the PreExecute event of the data flow, I stuff a recordset into a variable that is declared at the data flow scope. Within the data flow, I use a script component to read in the data from the recordset.
Example:
Dim olead As New Data.OleDb.OleDbDataAdapter
Dim dt1 As New System.Data.DataTable
Dim row As System.Data.DataRow
olead.Fill(dt1, Me.Variables.rsIntRateStrata)
If I display the count of the records in the data table dt1, it shows 42 rows, which is correct. Run the package, everything runs as expected. So far, so good.
Now, I set up another source/destination within the same data flow, as well as a script component between them, same as the first flow described above. Now my data flow has two parallel flows (different source & destinations). I copy the same script logic from the first flow into the second. Run the package- no errors, everything is fine... except when I inspect the data, it looks like the transformation isn't working correctly in the second script.
So I display a messagebox of each script component during run time. The first component displays 42 records, while the second displays 0 records? Same variable. Same data flow.
So I delete the first (original) flow from my data flow. Run the package again. Now the messagebox says 42.
What is happening here? Do I have to create two variables to duplicate the same recordset if I need to use it multiple times within the same data flow? Is this a bug?
-Kory
How To Read A Set Of Rows Into Session Variables? C#
Oct 23, 2007Hello ASP.NET C# and SQL gurus
I want to read the results of a set of rows into session variables -- how is it possible?
Let me try explain. I have a query which returns multiple rows, e.g. the following query
SELECT PROFILE_ID, PROFILE_NAME FROM USER_PROFILES returns 5 rows i.e 5 sets of profile_ids and profile_names.
Now, I want to capture these and store them in session variables thus.
Session["PROFILEID_1"] =
Session["PROFILEID_2"] =
Session["PROFILEID_3"] =
Session["PROFILEID_4"] =
Session["PROFILEID_5"] =
Session["PROFILENAME_1"] =
Session["PROFILENAME_2"] =
Session["PROFILENAME_3"] =
Session["PROFILENAME_4"] =
Session["PROFILENAME_5"] =
Thanks in advance!
Fouwaaz
Use Variables As A Storage [read/write] ?
Aug 2, 2007Hello Guys,
in SSIS I want to get a set of data and do some modifications on it before I insert it into the destinatipn. So far so good. Some of the modifications will include comparisions between two columns and if certain field is NULL then I want to get the value from the other one I was comparing to. When using conditional splits, I only get the rows to be redirected so that I can do whatever next. However, I want like use the variables as a storage so that I can put the value of one of the two columns in this variable which will be actually loaded into the destination finally. Any help?
Thanks
The Version Of Component **** (11773) Is Not Compatible With This Version Of The DataFlow.
Dec 12, 2007
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings:
Package Errors:
The version of component "****" (11773) is not compatible with this version of the DataFlow.
Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly.
The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1".
component "Agreement File" (11773) failed validation and returned error code 0xC0048021.
One or more component failed validation.
There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Any help would be appreciated.
FMikee
Integration Services :: Passing Variables In Script Component?
Apr 22, 2015I am using one URL in script component, I want to pass the URL through variable, How can we achieve that...
I am using SSIS 2012.
Reference Package Level Variables In A Script Component.
Feb 27, 2006I am trying to reference a package level variable in a script component (in the Code) and am unable to do so successfully. I have it listed as a ReadOnlyVariables in the custom properties of the script component, however unable to reference it in the code.
Any help will be appreciated.
Thanks,
Andy.
Get The List Of Variables In A Package Inside A Custom Component
Oct 26, 2006Hi
I am developing custom dataflow component ,I need to get the of variables of the current package in the component , how can i get it?
Thanks
Mani
SqlDataSource + GridView - Scalar Variables Not Being Read
Mar 11, 2007Hi all, first post, and I am desperate.
I have a SqlDataSource with a Select, Update and Delete command. From what I understand, scalar variables should be read automatically from the GridView's BoundField columns when it executes a command on it. Here is my code:
<asp:GridView
ID="teamGrid"
EmptyDataText="n/a"
DataKeyNames="TeamId"
AutoGenerateColumns="false"
DataSourceID="teamSource"
OnRowEditing="validateEdit"
OnRowDeleting="validateDelete"
runat="server">
<Columns>
<asp:CheckBoxField DataField="TeamApproved" HeaderText="Approved" />
<asp:BoundField DataField="TeamName" HeaderText="Team Name" />
<asp:TemplateField HeaderText="City">
<ItemTemplate>
<asp:Label runat="server"><%# Eval("City") %></asp:Label>, <asp:Label runat="server"><%# Eval("ProvinceCode") %></asp:Label>
</ItemTemplate>
</asp:TemplateField>
<asp:BoundField DataField="RequestedDivision" HeaderText="Division Req." ControlStyle-Width="60px" />
<asp:BoundField DataField="DivisionCode" HeaderText="Assigned Division" ControlStyle-Width="60px" ConvertEmptyStringToNull="true" NullDisplayText="n/a" />
<asp:BoundField DataField="DivisionNumber" HeaderText="Division Number" ControlStyle-Width="60px" ConvertEmptyStringToNull="true" NullDisplayText="n/a" />
<asp:BoundField DataField="Password" HeaderText="Password" ConvertEmptyStringToNull="true" NullDisplayText="n/a" />
<asp:CheckBoxField DataField="Paid" HeaderText="Paid" />
<asp:HyperLinkField Text="view players" ItemStyle-Width="70px" ItemStyle-HorizontalAlign="Center" DataNavigateUrlFields="TeamId" DataNavigateUrlFormatString="viewTeamPlayers.aspx?teamId={0}" ShowHeader="false" />
<asp:CommandField ItemStyle-HorizontalAlign="Center" ItemStyle-Width="30px" ButtonType="Link" EditText="edit" ShowEditButton="true" ShowHeader="false" />
<asp:TemplateField ShowHeader="False" ItemStyle-HorizontalAlign="Center" ItemStyle-Width="30px">
<ItemTemplate>
<asp:LinkButton runat="server" CausesValidation="False" CommandName="Delete" OnClientClick='return confirm("Deleting this team will also delete the players. Are you sure you wish to continue?");' Text="delete" />
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
<asp:SqlDataSource
ID="teamSource"
ConnectionString="<%$ ConnectionStrings:MB %>"
SelectCommand="SELECT TeamId, TeamName, ProvinceCode, City, DivisionCode, DivisionNumber, TeamApproved, RequestedDivision, Paid, Password, CaptainId, Player2Id, Player3Id, Player4Id FROM [Team]"
UpdateCommand="UPDATE [Team] SET TeamName = @TeamName, DivisionCode = @DivisionCode, DivisionNumber = @DivisionNumber, TeamApproved = @TeamApproved, Paid = @Paid, Password = @Password WHERE TeamId = @TeamId"
runat="server" />
</form>
I apologize for the way the code is put in, the code thing cut off a lot of the text! The problem I'm getting is, when the 'Update' button is hit, I get the error: Must declare the variable '@TeamId'.
I've tried putting "Update Parameters", that takes away the error, but the row does not update. I've browsed the internet and saw the same problems in lots of areas, but either a) none of the solutions work for me, or b) they don't really apply to my case.
I'm using ASP .NET 2.0, and (obviously) C#. SQL Server database.
Any help is greatly appreciated. Thanks in advance,
- Branden
Read All Variables In A Script Task W/o Enumerating Them
Sep 19, 2007I'm having trouble with my configurations. All of my configurations are targeting variables and the various properties are all set to expressions containing the targeted variables. I would like (during debugging) to dump out all of the variables.
Is there a way to access all variables from a script task? It looks like you have to enumerate the variables you want in the ReadOnlyVariables or ReadWriteVariables properties. I'd rather not miss one by forgetting to list it.
SSIS Data Flow Source Component To 'read' A PDF File
Feb 13, 2008At our business we are getting a lot of PDF documents that are being hand keyed into a database. Has anyone heard ior know of a SSIS Data Flow Source component that I coud use to read thos documents into a data stream (?) and process?
View 5 Replies View RelatedMapping Package Variables To A SQL Query In An OLEDB Source Component
Nov 2, 2006Learning how to use SSIS...
I have a data flow that uses an OLEDB Source Component to read data from a table. The data access mode is SQL Command. The SQL Command is:
select lpartid, iCallNum, sql_uid_stamp
from call where sql_uid_stamp not in (select sql_uid_stamp from import_callcompare)
I wanted to add additional clauses to the where clause.
The problem is that I want to add to this SQL Command the ability to have it use a package variable that at the time of the package execution uses the variable value.
The package variable is called [User::Date_BeginningYesterday]
select lpartid, iCallNum, sql_uid_stamp
from call where sql_uid_stamp not in (select sql_uid_stamp from import_callcompare) and record_modified < [User::Date_BeginningYesterday]
I have looked at various forum message and been through the BOL but seem to missing something to make this work properly.
http://msdn2.microsoft.com/en-us/library/ms139904.aspx
The article, is the closest I have (what I belive) come to finding a solution. I am sure the solution is so easy that it is staring me in the face and I just don't see it. Thank you for your assistance.
...cordell...
Read Of Flat File, Some Data On 1st Row Should Be Stored In Variables
Apr 7, 2008I'm reading a Flat File.
The 1ste record containts special Info that is needed for first preparing the database on a buld insert of the remaining lines.
How could i realize this, just read 1 line, store some of that data into variables, execute some proc's and then read the rest of the file ?
Kind Regards.