Hi,
I received this event in my eventlog
Error: 0, Severity: 19, State: 0
SqlDumpExceptionHandler: Process 6 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
What could be the cause of this??
Thanks in advance
Mikael
I have tried several times to install SQL server onto an NT4.0 server which is more than capable of having more than one application to cope with, however, when going through the install procedure the programm stops with the following message
DR.Watson
Access Violation
Setup.exe
In address :
Any hints as to where the problems lies or point me inthe right direction would be appreciated.
Where i try to create stored procedure in sql server 2000 using query analyzer i'm getting an error
'[Microsoft][ODBC SQL Server Driver]Syntax error or access violation'
and the same stored procedure if i try after some time without any changes it gets created..
how is wrong?
Hi guys! I am using SQL 2005 and I wonder why I am encountering the error "[Microsoft][ODBC SQL Server Driver]Syntax error or access violation" everytime I am trying to create stored procedure with temp table and table variable.
See my code below with temp table.
Any thoughts will be appreciated!
CREATE PROCEDURE DBO.SAMPLESP
(@DETAILS AS VARCHAR(8000),
@ID AS VARCHAR(15))
AS
BEGIN TRANSACTION
CREATE TABLE DBO.#TEMPTABLE
{
ASSET VARCHAR(50)
}
DECLARE @INSTINSERT AS NVARCHAR(4000)
SET @INSTINSERT= 'INSERT INTO #TEMPTABLE(ASSET)'
SET @INSTINSERT= @INSTINSERT+ @DETAILS
EXEC sp_ExecuteSQL @INSTINSERT
INSERT INTO InstDetail
(TrackNum, ASSETID)
SELECT @ID, A.ASSE
FROM #TEMPTABLE A
DROP TABLE #TEMPTABLE
IF @@ERROR != 0
BEGIN
ROLLBACK TRANSACTION
RAISERROR('There was an error in here', 11, 1)
RETURN
END
ELSE
COMMIT TRANSACTION
dear friends/collegs:
for the past couple of weeks, we've been seeing:
SQL Server Error:
"kernel RA_Setup_IO [Bucket: 0] [slot: 0]: Process 4 generated access violation; SQL Server is terminating this process"
we're running SQL Server 6.5 sp4. on NT 4. sp3
How execption access violation error msg with severity 19 handled in sql7 ?
Thanks for info.
System Spec: OS = Windows 2000, SQL Server 7 SP4.
I'm getting the following error when I run a stored procedure which truncates a table then inserts data into it. There are no complex joins, order, group by or union clauses in the insert statement:
Error: 0, Severity: 19, State: 0
SqlDumpExceptionHandler: Process 17 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
I've read that this is fixed in SQL 7 SP2 but we're on SP4?? I have re-installed SQL SP4.
I have a task i.e. to make the following query work.
But it shows me syntax error. I dont know what this query is doing and I have no concerns about it. so if any body could help me out that will be a big help :)
SHAPE {
SELECT * FROM Leads
WHERE 1=1
AND ( ([Lead Quality] NOT IN (1,5,6,7) )
AND ( idVendors = '{ADF4406A-ACB7-4610-A03F-702D86CC259F}' )
AND ( idLeads IN (select idleads from [vendors history] where status = 3) )
AND ( [received datetime] between '6/18/2007' AND '6/19/2007' )
AND ( [Lead Type] NOT IN (7,8) )
)
ORDER BY idVendors, [Customer ID]
}
AS [Leads Detail]
APPEND
( { SELECT * FROM [Leads Borrower Information] WHERE [CoBorrower Indicator] = 0 } As [Borrower Information] RELATE 'idLeads' TO 'idLeads'),
( { SELECT * FROM [Leads Borrower Information] WHERE [CoBorrower Indicator] = 1 } AS [CoBorrower Information] RELATE 'idLeads' TO 'idLeads'),
( { SELECT * FROM [Leads Property Information] WHERE [Mailing Address Indicator] = 0 } As [Property Information] RELATE 'idLeads' TO 'idLeads'),
( { SELECT * FROM [Leads Property Information] WHERE [Mailing Address Indicator] = 1 } AS [Mailing Information] RELATE 'idLeads' TO 'idLeads'),
( { SELECT * FROM [Leads Mortgage Information] WHERE [Mortgage Indicator] IN (0,1) } AS [First Mortgage Information] RELATE 'idLeads' TO 'idLeads'),
( { SELECT * FROM [Leads Mortgage Information] WHERE [Mortgage Indicator] = 2 } AS [Second Mortgage Information] RELATE 'idLeads' TO 'idLeads'),
( { SELECT * FROM [Vendors] } As [Vendor Information] RELATE 'idVendors' to 'idVendors'),
( { SELECT * FROM [Lead Quality Reason Values] } As [Return Reason] RELATE 'Lead Quality Reason' to 'Value'),
( { SELECT [Batch ID], idLeads, idVendorsOrders FROM [Vendors History] WHERE STATUS IN (1,2) } As [Vendor History] RELATE 'idLeads' to 'idLeads'),
( { SELECT TOP 1 idLeads, DateTime from [Clients History] WHERE Status IN (3) ORDER BY DateTime ASC } As [Clients History] RELATE 'idLeads' to 'idLeads')
Hi,
I have suddenly developed a problem when trying to select from a table. Even a standard select * from generates a SQL Dump exception handler. The table is below:
CREATE TABLE [Stagetb_GIDeptGroup] (
[f_GIImportID] [int] IDENTITY (1, 1) NOT NULL ,
[f_GIAction] [int] NOT NULL CONSTRAINT [DF_stagetb_GIDeptGroup_f_GIAction] DEFAULT (0),
[f_ImportBatchID] [int] NULL ,
[f_VisualDeptGroupID] [int] NULL ,
[f_DeptGroupName] [varchar] (40) COLLATE Latin1_General_CI_AS NULL ,
[f_DeptGroupTarget] [d_Percentage] NULL ,
[f_ExternalDeptGroupID] [int] NULL ,
[f_StatusID] [int] NOT NULL CONSTRAINT [DF_stagetb_GIDeptGroup_f_StatusID] DEFAULT (0),
[f_StatusDetailID] [int] NOT NULL CONSTRAINT [DF_stagetb_GIDeptGroup_f_StatusDetailID] DEFAULT (0),
CONSTRAINT [PK_stagetb_GIDeptGroup] PRIMARY KEY CLUSTERED
(
[f_GIImportID]
) ON [PRIMARY]
) ON [PRIMARY]
GO
When i run a dbcc checkdb it finds nothing, if i try and connect from a remote connection i get a general network error and when connecting from the local machine i get this Dump exception error:
2005-12-06 08:40:55.28 spid53 Error: 0, Severity: 19, State: 0
2005-12-06 08:40:55.28 spid53 language_exec: Process 53 generated an access violation. SQL Server is terminating this process..
2005-12-06 08:40:57.76 spid53 Using 'sqlimage.dll' version '4.0.5'
Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQL00010.dmp
2005-12-06 08:40:57.76 spid53 Error: 0, Severity: 19, State: 0
2005-12-06 08:40:57.76 spid53 SqlDumpExceptionHandler: Process 53 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process..
************************************************** *****************************
*
* BEGIN STACK DUMP:
* 12/06/05 08:40:57 spid 53
*
* Exception Address = 00425E61
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address 00000000
* Input Buffer 70 bytes -
* select * from stagetb_GIDeptGroup
*
*
* MODULE BASE END SIZE
* sqlservr 00400000 00B19FFF 0071a000
* ntdll 77F50000 77FF6FFF 000a7000
* kernel32 77E60000 77F45FFF 000e6000
* ADVAPI32 77DD0000 77E5CFFF 0008d000
* RPCRT4 78000000 78085FFF 00086000
* USER32 77D40000 77DC5FFF 00086000
* GDI32 7E090000 7E0D0FFF 00041000
* OPENDS60 41060000 41065FFF 00006000
* MSVCRT 77C10000 77C62FFF 00053000
* UMS 41070000 4107CFFF 0000d000
* SQLSORT 42AE0000 42B6FFFF 00090000
* MSVCIRT 002A0000 002AFFFF 00010000
* sqlevn70 41080000 41086FFF 00007000
* NETAPI32 71C20000 71C6DFFF 0004e000
* wmi 76D30000 76D33FFF 00004000
* SSNETLIB 42CF0000 42D05FFF 00016000
* WSOCK32 71AD0000 71AD7FFF 00008000
* WS2_32 71AB0000 71AC4FFF 00015000
* WS2HELP 71AA0000 71AA7FFF 00008000
* SSNMPN70 410D0000 410D5FFF 00006000
* security 71F80000 71F83FFF 00004000
* SECUR32 76F90000 76F9FFFF 00010000
* crypt32 762C0000 76347FFF 00088000
* MSASN1 762A0000 762AFFFF 00010000
* VERSION 77C00000 77C06FFF 00007000
* userenv 75A70000 75B14FFF 000a5000
* mswsock 71A50000 71A8AFFF 0003b000
* DNSAPI 76F20000 76F44FFF 00025000
* winrnr 76FB0000 76FB6FFF 00007000
* WLDAP32 76F60000 76F8BFFF 0002c000
* rasadhlp 76FC0000 76FC4FFF 00005000
* wshtcpip 71A90000 71A97FFF 00008000
* SSmsLPCn 42CD0000 42CD6FFF 00007000
* ntdsapi 767A0000 767B2FFF 00013000
* msv1_0 76D10000 76D2CFFF 0001d000
* OLE32 771B0000 772D0FFF 00121000
* CLBCATQ 76FD0000 77047FFF 00078000
* OLEAUT32 77120000 771AAFFF 0008b000
* COMRes 77050000 77114FFF 000c5000
* sqloledb 01D80000 01DF2FFF 00073000
* MSDART 74C50000 74C6EFFF 0001f000
* COMCTL32 77340000 773CAFFF 0008b000
* comdlg32 763B0000 763F4FFF 00045000
* SHLWAPI 70A70000 70AD4FFF 00065000
* SHELL32 773D0000 77BC1FFF 007f2000
* MSDATL3 60E30000 60E44FFF 00015000
* comctl32 71950000 71A33FFF 000e4000
* oledb32 02020000 02084FFF 00065000
* OLEDB32R 01E00000 01E0FFFF 00010000
* xpsqlbot 42F00000 42F05FFF 00006000
* xpstar 410F0000 41133FFF 00044000
* SQLUNIRL 5C1B0000 5C1DCFFF 0002d000
* WINSPOOL 73000000 73022FFF 00023000
* SQLRESLD 42AC0000 42AC6FFF 00007000
* SQLSVC 42C40000 42C56FFF 00017000
* ODBC32 02150000 02181FFF 00032000
* odbcbcp 02190000 02195FFF 00006000
* W95SCM 41140000 4114BFFF 0000c000
* NDDEAPI 75940000 75946FFF 00007000
* odbcint 022B0000 022C5FFF 00016000
* clusapi 55560000 55570FFF 00011000
* resutils 750B0000 750C0FFF 00011000
* SQLSVC 43970000 43975FFF 00006000
* xpstar 439E0000 439EBFFF 0000c000
* DBGHELP 02420000 02432FFF 00013000
* msdbi 6BE90000 6BEABFFF 0001c000
* sqlimage 4A400000 4A40CFFF 0000d000
*
* Edi: 1ADA13F4: 00000000 1ADA1758 00000000 1ADA1400 00000001 00000000
* Esi: 00000000:
* Eax: 1ADA13E0: 009802E4 00000032 00000000 00000000 00000000 00000000
* Ebx: 1ADA13E0: 009802E4 00000032 00000000 00000000 00000000 00000000
* Ecx: 00000000:
* Edx: 1ADA1410: 00000000 6E006100 00000000 00000000 00000000 1ADA0030
* Eip: 00425E61: 7589018B 8B10FFFC F44D8BF0 A5A5A5A5 5EC38B5F 0D89645B
* Ebp: 0213DFE8: 0213E01C 004C4EB7 1ADA0020 00000000 1ADA1168 1ADC84D0
* SegCs: 0000001B:
* EFlags: 00010282: 0050004F 00300048 00300033 00560030 004F0042 004E0000
* Esp: 0213DFCC: 1ADA07F0 1ADA0020 00A0A4A0 1ADA13E0 0213E010 0092D7B0
* SegSs: 00000023:
************************************************** *****************************
-------------------------------------------------------------------------------
Short Stack Dump
00425E61 Module(sqlservr+00025E61)
004C4EB7 Module(sqlservr+000C4EB7)
0049DCD9 Module(sqlservr+0009DCD9)
0049DAF9 Module(sqlservr+0009DAF9)
00447078 Module(sqlservr+00047078)
004510FE Module(sqlservr+000510FE)
00415080 Module(sqlservr+00015080)
004592CE Module(sqlservr+000592CE)
005A7208 Module(sqlservr+001A7208) (SQLExit(unsigned long)+000523F6)
005A7099 Module(sqlservr+001A7099) (SQLExit(unsigned long)+00052287)
00446A83 Module(sqlservr+00046A83)
004510FE Module(sqlservr+000510FE)
00415080 Module(sqlservr+00015080)
004592CE Module(sqlservr+000592CE)
0041534F Module(sqlservr+0001534F)
00459A54 Module(sqlservr+00059A54)
004175D8 Module(sqlservr+000175D8)
410735D0 Module(UMS+000035D0) (UmsSystemUserContext::UmsSystemUserContext(class UmsScheduler *,struct UMS_SYSPARAMS *)+00000434)
4107382C Module(UMS+0000382C) (UmsScheduler::FiberEnabled(void)+000001D2)
77C37E53 Module(MSVCRT+00027E53) (_endthread+000000AA)
77E7D33B Module(kernel32+0001D33B) (RegisterWaitForInputIdle+00000043)
I am running Windows XP Professional & MSDE Service Pack 3. Any ideas anyone?
Hi all,Since yesterday I'm unable to lauch the enterprise manager, it givesthe following error :Unhandled exception at 0x0101f07e in mmc.exe: 0xC0000005: Accessviolation reading location 0x00000064.The weird thing is that except installing the office xp PIA's I can'timage what else could be changed on my system.I tried reinstalling, but still the same error.I tried SP3a, still nothing changed.Searched in some groups and it seems that not much can be found aboutit, so my inspiration is running dry.Anyone had this problem ? Anyone any suggestions how to solve it ?Regards,Koen
View 2 Replies View RelatedHi MS NewsgroupI am using SQL 2000 SP3 + latest hot fixes and I am editing a DTSpackage. When I save the package I get a SQL Server Access Violationand cannot save the package. This does not crash SQL nor EnterpriseManager but no matter what I do I cannot save the package. This occursfor only 1 package on the server (others are ok) and for all users ofany privilaged access level. I have tried to save to file, VB, etc butall fail similarly.I have read MS KB and have tried all options they suggest but to noavail! I'd like not to have to rewrite the DTS again from scratch.Ideas anyone?Thanks
View 1 Replies View RelatedHello,I have some code that uses ODBC to retreive column informationfrom a SQL Server database. The call to ::SQLColumns succeeds.I then bind my C variables to the HSTMT handle. I then call::SQLFetch to get the next row. ::SQLFetch crashes with anaccess violation. I am unable to debugThe same code works without issue against a MySQL database.Has anyone ever encountered this crash?Is there a work-around anyone knows of?Thank you very much for your help.
View 1 Replies View RelatedI recently set up transactional replication from one server database to another server database. I keep getting a Log Reader Agent error: An access violation occurred.
The SQL Server agent starts under one Windows account but the Server is registered under the system account. The log reader agent is using the system account.
I'm not sure what else to check or what database permissions or roles should be set. Can somebody help? Thanks.
After an error trying to connect to a database, I am trying to query the number of status records using SQLGetDiagField() and am getting an access violation? I am trying to open a connection to data in an Excel file using the Excel ODBC driver. Any hints?
View 1 Replies View RelatedHi, Folks!
I'm receiving Access Violation Error when I'm trying to create a clustered index on a datetime field on a table that have around 4 million records, if I create the index nonclustered, no problem, but clustered the system raise this error!
Any help will be appreciate a lot!
Thanks in advance!
Armando Marrero
Cti. Miami
Our log reader process is throwing an access violation error every 10 minutes or so. It runs fine for a bit then fails. Below is, I think, the important info from a stack dump analysis. We are running SQL 2012 SP1 64 bit. I think we can either install SP2 or open a case with Microsoft.
0:000> kC 1000
Call Site
sqlmin!ReplArticleCmd::updated_column
sqlmin!ReplArticleCmd::AddSupdateParams
sqlmin!ReplArticleCmd::GenerateSUpdateProcedure
sqlmin!ResolveUpdateCommand
sqlmin!ReplTranInfo::ProcessInsert
[Code] ....
I can see that the sp_replcmds SP is running when this happens.
* BEGIN STACK DUMP:
* 07/15/15 12:37:39 spid 81
*
*
* Exception Address = 000007F988FCA480 Module(sqlmin+0000000000C4A480)
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address 0000000000000000
[Code] ....
Aaaaaarrgghh ! (that's better)I am trying to convert a field within my Oracle 9i Database that is oftype BLOB (but this BLOB may contain a combination of clobs/varchars orimages such as gif images, jpg images) to Microsoft SQL Server 2000using Microsoft DTS.On trying to perform this simple conversion I recieved the error "Needto run the object to perform the operation - Exception AccessViolation" from Microsoft DTS and my table that contains this BLOBfield is not converted across.After further investigation I implemented the fixes suggested by theMicrosoft Knowledge Base and "sqldts.com" but still no joy the errorkept occuring.I discovered my modifying the step in the DTS package that handled thistable conversion that contained the BLOB column that when I changed thedata type on my SQL Server target table to VARBINARY and modified thequery so that only the BLOBs that contained clobs/varchars were broughtacross that the error went away.I then proceeded to create another DTS package step that had a querythat only brought across the BLOB column that contained images such asgif images/jpeg images etc. and the error went away and the target typefor the SQL Server target table was set to IMAGE.As the data for this BLOB contains a combination of VARCHARS/CLOBS(concatanted) and also GIF IMAGES/JPEGS in the same source column withOracle 9i I require the same in my target table within SQL server asone column (and I should be able to do that with type IMAGE especiallyas it can store larger objects than VARBINARY but any source BLOBS thatcontain VARCHAR/CLOBs don't seem to want to be loaded as IMAGE theywill only load in to VARBINARY).However judging by my experiences above this doesn't seem to bepossible ?Can anyone help me out with this ?I am on Microsoft SQL Server 2000 Service Pack 4 with latest MDAC(2.8.1).Cheers,Gary
View 1 Replies View RelatedHi,
Background:
This could be a simple C++ issue as I am not that familiar with the language. I am trying to prototype a small program to test the performance of inserting data using the BCP interface. I want to BCP data that my program generates and passes via program variables.
I have narrowed the issue down to a sprintf call. Following are two variations of the code - one that works and one that does not. The error happens when I try to execute the bcp_sendrow() call.
What is the appropriate way to create / send string data to the BCP interface. Any good examples available? I have created the following from the BulkCopyFromVariables example on the Microsoft SQL Server downloads site.
Thanks in advance, Kerry
---- Works ----
Code Snippet
for(idx=1; idx<=5; idx++){
//sprintf(k1, "%d", idx); //does not work...
sprintf(k1, "oo"); //works....
if ( (SendRet = bcp_sendrow(hdbc1) ) != SUCCEED ) {
printf("bcp_sendrow(hdbc1) Failed");
Cleanup();
return(9);
}
}
--- Causes Access Violation ----
Code Snippet
for(idx=1; idx<=5; idx++){
sprintf(k1, "%d", idx); //does not work...
//sprintf(k1, "oo"); //works....
if ( (SendRet = bcp_sendrow(hdbc1) ) != SUCCEED ) {
printf("bcp_sendrow(hdbc1) Failed");
Cleanup();
return(9);
}
}
--- Additional information ---
---------------------------
Target Table Definition
---------------------------
Code SnippetCREATE TABLE PtTest(
[ID] [int] IDENTITY(1,1) NOT NULL,
[PtID] [int] NOT NULL,
[ParamID] [nchar](10) NULL DEFAULT ((200)), --Above example trying to insert data here via k1 variable...
[ParamValue] [nchar](10) NULL DEFAULT ((200)),
[InsDate] [datetime] NULL DEFAULT (getdate()),
)
----------------------------
-----------------
Bind statements
-----------------
Code Snippet
int idx;
char k1[5];
char *terminator = " ";
retcode = bcp_bind(hdbc1, (BYTE *)&idx, 0, sizeof(DBINT), NULL, 0, SQLINT4, 2);
if ( (retcode != SUCCEED) ) {
printf("bcp_bind(hdbc1) Failed");
Cleanup();
return(9);
}
retcode = bcp_bind(hdbc1, (BYTE *)&k1, 0, SQL_VARLEN_DATA, (UCHAR*)terminator, 1, SQLCHARACTER, 3);
if ( (retcode != SUCCEED) ) {
printf("bcp_bind(hdbc1) Failed");
Cleanup();
return(9);
}
Note: there are other bind statements...
-----------------
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
Hi,
I'm writing a stored procedure and when I click on the Check Syntax button its giving me the error in the subject. I'm not really sure whats wrong with this. Here is my Stored Procedure code. Any help wud be appreciated.
CREATE PROC CabsSchedule_Insert
{
@JulianDatesmallint,
@SiteCodesmallint,
@CalendarDaysmallint,
@BillPeriodsmallint,
@WorkDaysmallint,
@CalDayBillRcvd varchar(30),
@Remarksvarchar(50)
}
AS
INSERT INTO CabsSchedule
(JulianDate, SiteCode, CalendarDay, BillPeriod, WorkDay, CalDayBillRcvd, Remarks)
VALUES
(@JulianDate, @SiteCode, @CalendarDay, @BillPeriod, @WorkDay, @CalDayBillRcvd, @Remarks)
Thanks,
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If there are two different transactions, both of which update the username column to 'xyz' for userid = 234 in 'Users' table. This is a unique value for username. Ater this update each transaction adds a row to 'AppLog' table. The transaction is only committed after second operation.
The 'username' column has a unique constraint on it.
If transaction isolation level is 'read committed', and both transaction execute the first operation when neither of the transactions have been committed, then the transaction that calls COMMIT later will error out or not? If COMMIT does not check constraints then it will NOT error out. As a result we will have a violation of unique constraint happening without any error being thrown by SQL Server.
Hi,I have some database files (.MDF, .LDF,...) on the server. When I tryto delete them, the warning "Cannot delete file: There has been asharing violation. The source or destination file may be in use."appears.Since I am new to the environment I don't know where the files comefrom and where they might be used.Can anybody tell me what to do to delete those files?Thank you.
View 36 Replies View RelatedHi there,
When the distribution agent runs trying to apply the snapshot at the subscriber I get the following error message
Message
2006-06-24 12:41:59.216 Category:NULL
Source: Microsoft SQL Native Client
Number:
Message: Batch send failed
2006-06-24 12:41:59.216 Category:NULL
Source: Microsoft SQL Native Client
Number: 2627
Message: Violation of PRIMARY KEY constraint 'MSHREPL_1_PK'. Cannot insert duplicate key in object 'dbo.ITEMTRANSLATION'.
2006-06-24 12:41:59.216 Category:NULL
Source:
Number: 20253
What could possibly cause this error? And how can I possibly fix it?
Best regards,
JB
Hi,
I am facing a wierd problem working with SQL Server Mobile edition database. The code works fine for some time and then it suddenly starts throwing "There is a file sharing violation. A different process might be using the file."
I am disposing and closing the connection after each operation.
Please find the function code below which is being used for any database operation.
SqlCeConnection sqlCon = null;
try
{
sqlCon = ConnectionFactory.getInstance().getPrimDsConnection();
sqlCon.Open();
readCmd = sqlCon.CreateCommand();
this.prepareStmtManyRows();
dataReader = this.readCmd.ExecuteReader();
IList result = this.populateManyRows();
return result;
}
catch (SqlCeException sqlEx)
{
StringBuilder builder = new StringBuilder(
@"SqlCe Error in BaseReader.executeList() - ").Append(
sqlEx.Message).Append(':').Append(sqlEx.NativeError);
Log.getInstance().log(builder.ToString());
throw new DataAccessException(sqlEx);
}
finally
{
try
{
if( null != dataReader && ( !dataReader.IsClosed ))
{
dataReader.Close();
dataReader.Dispose();
}
if( null != readCmd) readCmd.Dispose();
if( null != sqlCon) sqlCon.Close();
}
catch (System.Exception ex)
{
}
}
I have also made sure that Query Analyzer is not running on my PDA.
I have been working on this since last one week but could not find a soultion.
Thanks,
A Islam
Can anyone help with this problem?
I have a green light on my Report Services Confuration, and can configure the server within sharepoint integrated mode. I have also assign the appropriate permission for aspnet etc..etc.
From within Business Intelligent studio when I tried to publish my reports I get the below error:
The server commited a protocol violation
Here is a copy of the report server services log file.
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>GMT Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__main_06_21_2007_10_47_38.log</Path>
<SystemName>DMTXDW01VM2</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!21/06/2007-10:47:39:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!servicecontroller!9!21/06/2007-10:47:46:: i INFO: Total Physical memory: 1073094656
ReportingServicesService!servicecontroller!4!21/06/2007-10:47:47:: i INFO: RPC Server started. Endpoint name ='ReportingServices$MSSQL.3'
Urgent help required!
I have table variable in which I am inserting data from sql server database. I have made one of the columns called repaidID a primary key so that a clustered index will be created on the table variable. When I run the stored procedure used to insert the data. I have this error message; Violation of Primary key Constraint. Cannot insert duplicate primary key in object. The value that is causing this error is (128503).
I have queried the repaidid 128503 in the database to see if it is a duplicate but could not find any duplicate. The repaidID is a unique id normally use by my company and does not have duplicates.
I having a problem importing a text file into an existing table using the DTS import wizard. The problem I am having is, I am getting an error message stating: Integrity violation: attempt to insert null data or data which violates constraints. The column the error is referenced to is an identity field and I am not trying to insert any data into the field. I have the allow insert identity box checked in the transformation section. Does anyone know about how to solve this problem.
Thanks
James
I have a table with 5 columns .Length of the 2nd column is 4 characters.
I have to create a new database and copy the existing data.Alter the 2nd column to have 6 charactrers.
Append the values in 2nd column with 00.
I have only one row in the old database.
I am able to copy the rows.But after that when I try to update,it is giving primary key violation error.
What could be the reason?
I am running SQL 6.5 service pack 5a.
I keep getting a Attempt to insert duplicate key row in object... when I try to add a record. I know for a fact that the primary key is not being duplicated because I can look in the db and see that it is not there and if I continue to try to add it it will eventually succeed. Does anyone know what might be causing this?
Please email as well as post.
Thanks.
Carole
Hi,
I have got a very peculier kind of problem. My package is running on SQL 2000. There is a identity primary key in a table. Now when I submit the data from 2 different computer at the same time. Only one data is storing. The reason behind this is the primary key violation. as both the data are sending the request to the database at the same time.................n as the primary key is th identity column, it is storing one that value which is able to store the data at the forst hand.
Now plz help me out in this regard................. :confused:
I am maintaining a stored proc that does the following (pseudo code for simplicity)
INSERT INTO MyTable (CountColumn, ...) VALUES (1, ...)
-- 2627 = Primary key violation
IF (@@ERROR = 2627)
UPDATE MyTable SET CountColumn = CountColumn + 1
WHERE ...
Basically, try to create a new record with a PK and a count of 1. If a PK violation occurs, UPDATE the count of existing record.
Pretty simple logic. On some servers this works exactly as expected; the PK violation is caught and handled internally. On other servers, this error percolates out of the stored proc and causes the calling code to receive an error and fail. All servers are SQL Server 2000 SP3a Standard Edition. Any ideas why this happens?
Is there a better (and ideally as fast or faster) way to handle the INSERT/UPDATE issue? I can put the UPDATE first and INSERT if @@ROWCOUNT is 0, but that has the slight potential of a race condition where two processes try to INSERT the same PK at the same time.
Violation of PRIMARY KEY constraint 'PK_CUSTOM2'. Cannot insertduplicate key in object 'MHGROUP.Custom2'Is there ANY other reason this violation of the primary key wouldhappen OTHER than a trying to insert a duplicate record?This sql statement false due to the primary key violation:Insert Into MHGROUP.Custom2SelectClientNumber,MatterNumber,MatterDescription,'Y'From MG_EliteMatters EMLeft Outer Join MHGROUP.Custom2 C2On C2.CPARENT_ALIAS = EM.ClientNumberAnd C2.Custom_ALIAS = EM.MatterNumberWhere CPARENT_ALIAS Is Null And Custom_ALIAS Is Null---Custom2CREATE TABLE [MHGROUP].[CUSTOM2]([CPARENT_ALIAS] [varchar](32) COLLATE SQL_Latin1_General_CP1_CI_ASNOT NULL,[CUSTOM_ALIAS] [varchar](32) COLLATE SQL_Latin1_General_CP1_CI_AS NOTNULL,[C_DESCRIPT] [varchar](254) COLLATE SQL_Latin1_General_CP1_CI_ASNULL,[ENABLED] [char](1) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,CONSTRAINT [PK_CUSTOM2] PRIMARY KEY CLUSTERED([CPARENT_ALIAS] ASC,[CUSTOM_ALIAS] ASC)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]) ON [PRIMARY]--MG_EliteMattersCREATE TABLE [dbo].[MG_EliteMatters]([Matters] [varchar](16) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,[ClientNumber] [varchar](32) COLLATE SQL_Latin1_General_CP1_CI_ASNULL,[ClientDescription] [varchar](254) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[MatterNumber] [varchar](32) COLLATE SQL_Latin1_General_CP1_CI_ASNULL,[MatterDescription] [varchar](254) COLLATESQL_Latin1_General_CP1_CI_AS NULL,[LastDateModified] [datetime] NULL,[PracticeArea] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_ASNULL) ON [PRIMARY]
View 1 Replies View Related