I've been trying to use the integrations services to access AS400 data with almost no success. Any suggestions or help you can give me would be appreciated. Some of the issues I can't make sense of are the following.
View 11 RepliesHello,
I have de same problem that you have to get data from AS/400 to SQL Server 2005 using the SQL Server Import and Export Wizard.
Did you successfully? If yes how please?
I have used:
IBM DB2 UDB for iSeries IBMDA400 OLE DB Provider,
IBM DB2 UDB for iSeries IBMDARLA OLE DB Provider,
IBM DB2 UDB for iSeries IBMDASQL OLE DB Provider,
Microsoft OLE DB Provider for DB2
Regards
Rui Martins Santos
RMS
I am attempting to transfer a table from an AS400 to SQL Server 2005 through SSIS. I am using the IBM DB2 UDB ISeries IBMDASQL OLEDB Provider as the source connector. I have tried to set up the source connector using the Table or View option but it says that No Tables Could Be Loaded. I can specify an SQL command and it shows the columns and appears to set up correctly except for showing a warning indicating that it cannot retrieve the column code page information from the OLEDB provider. When I run the job, it fails with the following error:
View 16 Replies View RelatedHi all,
I am working at insurance company that using AS400 as it main server. All transaction data is already kept for about 10 years (or even more..). This data is growing larger from time to time, and after several upgrades (that cost a lot!), my supervisor has an idea to partly move the data from AS400 to SQL Server. (since the cost for upgrading sql server is cheaper than AS400).
So.. let say, we only want to kept data in AS400 from 4 years before until now (2004 – 2007), and the rest of data is kept in SQL Server.
So first, all transaction data from 1997 – 2003 is transferred to SQL and deleted in AS400.
If user queried data and didn’t found the data in AS400, it will search the SQL, if data is found in SQL, then data is transferred back to AS400 and deleted in SQL.
I’m using SQL Server 2000 DTS (use HiT OLEDB) to transfer the data from AS400 to SQL and vice versa.
I wanna ask if anyone has done this before? What’s the difficulties by using this approach? (btw, I will implement the DTS using user control in vb.net)
Or anyone has a better solution to overcome this problem?
Thanks,
[RU]
How do i import As400 data in to SQL2005(standard version) using SSIS?? Please help!!!
View 1 Replies View RelatedAnyone writing data to DB2 on an AS400 with SSIS?
I cannot get the OLEDB destination configured correctly. I can set the destination up with a SELECT sql query, and preview the resultset.
I am creating a migration tool that retrieves data from an AS400 and an SQL 7 server to create a new database in SQL 2005. I have managed to create a linked server in SQL 2005 to the AS400. I don't know if it works or not. I've been trying to create a linked server to the SQL 7 server with no luck. The AS400 and SQL servers are on the same network. The SQL 2005 server is hosted somewhere else. I have access to everything. The SQL 2005 server is running Workstation. I tried to use Integration Services but finally discovered it was unavailable to Workstation.
I could use some good ideas or help.
When I execute the package in Debug mode, it works.
I then import the package into SQL Server 2005 and it is showing under Stored Packages --> MSDB - AS400Package
I can right click and Run Package from there and it works fine.
When I set the package up to run as a job, it fails. What I have noticed is that the Sign On that I use in the package shows that there was in "invalid login" after the job fails.
I hope I have this post in the right place and hope I have left enough information behind to help. If not let know what else I need to post. I have only been using Business Intelligence Development for a couple days and SQL Server 2005 for about a week or so. All of the SQL DTS packages that I have created seem to be working fine with their jobs as well as my stored procedures.
Thanks for any help you can give me.
I need to have an automated process to read data from DB2/AS400 and feed it to SQL Server 2000. Has anyone done this before? Any suggestions how it may be done? I know my company doesn't want to spend a lot to do this.
Thanks for your time.
Is there a good way to port data from an AS400 over to SQL server 2005? If anyone has any experience with this, can you tell me where to go to get info?
View 3 Replies View Related
I have a simple SSIS package that I want to move data from SQL 2005 to DB2/AS400. In order to use OLEDDB destination, I installed HIS2004 that provides DB2OLEDB support.
For simplicity and testing purpose, I created a connection pointing to a SQL table that contains only one ccolumn "last_name" of type "nvarchar(50)". This is my source, I then created another connection using DB2OLEDB pointing to a table on DB2 that contains only one field "name" of type "GRAPHIC(50)". This is my destination and the connection works fine to DB2 database. When I run the package, it has type conversion error as follows:
[OLE DB Destination [34]] Error: An OLE DB error has occurred. Error code: 0x00040EDA. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E07 Description: "Data or literal value could not be converted to the type of the column in the data source, and the provider was unable to determine which columns could not be converted. Data overflow or sign mismatch was not the cause.".
If I manually assign a vaule to the "last_name" using the "Derived Column" task like "Hello John", it just works fine.
Anyone knows what went wrong? Did I miss anything here? Thanks.
As a FYI: DTS works great in moving data from SQL 2000/2005 to DB2.
Your help will be appreciated.
Hi Guys
I am trying to replicate data from DB2/AS400 to SQL Server2005 (ENT edition) currently we use 3rd party tool to replicate data from DB2 to SQL Server2000 (ENT edition) and like to get rid of this 3rd party tool. I am searching for the last 3 weeks but didn€™t get a good starting point. I have linked DB2 to SQL Server2005 and can run queries against DB2/AS400 box. Now I want to set up transactional replication from DB2 to SQL Server 2005. I have read about peer to peer topologies but I don€™t know if that€™s the route I have to take?
So can someone please help me? I really appreciate your help.
Thanks
Tariq
I have been trying to transfer some data from a file located in a AS400 Server to SQL , but the file has more than one Member Name. I'm not sure how to specify a different member name on the SQL query . Please help.
The name of the file is:
Library = MTGLIBP2
File Name = CHSAVQPL
Member Name = INS
this is the query I have so far but I still need to reference the Member Name
SELECT *
FROM OPENQUERY(AS400PL,'SELECT * FROM mtglibp2.CHSAVQPL')
I created a SSIS package moving data from a SQL 2005 table to an existing DB2 table on AS400 using Microsoft OLE DB Provider for DB2.
When the package was run, it showed that rows were successfully inserted to DB2. However, the data didn't seem to be converted correctly. Most of the string values were inserted as unusual characters. Also any string values of digits were not inserted.
For example, 1.) a character field (char(1) or nchar(1) as I have tried both types) in SQL 2005 table with a simple value of 'H' was inserted into the DB2 table field of type "A" (alphanumeric) of length 1 as 'ç' and others letters were inserted as other unusual characters. 2.) A string value of '00100' in SQL Server is not inserted to DB2 table at all.
Later we found that the fields inserted with usual characters are difined as CSSID =65535. A few fields with correct data inserted have CSSID=00037.
Does anyone know why this happened and how to solve this to get the data inserted correctly in the DB2 table?
Thanks in advance for any help!
Is there a as400/db2 native provider to extract data?
View 9 Replies View RelatedHi All,
I want to Import data from AS400 to Sql2005. From the Sql Management studio I invoke the Import Data wizard. For the source I connect to the ISereis system and for the Destination I select the Sql2005 Database , When I go to the next step i.e select source tables I get the error
"An error has occured which the SQL Server Integration Wizard was not prepared to handle
No error message available,result codeB_E_CANTCANCEL(0*80040E15).(System.Data)" .After this I am unable to proceed further. I am using client Access tool to connect to ISereis
IBM DB2 UDB for isereis IBMDA400 OLE DB Provider
Regds,
Anu
Hi,
Yesterday I had posted a query of How to transfer the Data from AS400 files to Sql 2005 tables with DTS and the error I received for the same. I am not able to view the replies since it has been deleted. Pls repost the same. I posted the query expecting for a solution but instead my question was deleted..... the very purpose of forum is defeated.
Regds,
Anu
is there a step by step paper to get there? here is what i need to consider. I Iwill have many customers that will need their own set of records and access pages "branded for their company" each customer will have many clients. I am hosting this application on a windows 2003 server with SQL 2005 server enterprise.
I am using windows authentication, I have created a username in windows, then i added the windows user in SQL management studio in security, granted "DB Read" and "DB write" and again under the database security tab. still from the web authentication fails. i must be nissing a step or two?
I expect to set up a username for each database as i setup new customers.
I have an MVC asp.net application that stores many records in a table on sql server, in its own system. Â used the system for 2 months, worked fine accessing, changing data.
Now that other users are logging in? there is cross coupling going on. Â one user gets the data from another users sql search.
In the mvc app it had used the get async method to read the ID record from the db, i set that to synchronous. Â no effect; Â the user makes their own login id but that does nt matter either.
I have a SQLDataSource returning data for a formview. This should be a simple question that I cannot find an answer to. The SQLDataSource is returning only one row of data. How do I access the value of one of the columns?Thanks for the information.
View 3 Replies View RelatedHello Everyone,
Is it possible to write a query that can access data in differnt database so I have "trainee" and "training" databases. In want to access one training table in trainee database through a query. How can I do this.
Thanks.
Does anyone have code to access data? I want to create a sqldatasource control on the page, but would like to programmatically/manually/code-behind-wise to fill in my queries and their parameters. Thanks!
View 6 Replies View RelatedI am using a drap and drop SQLDataSource control. Everything works like I am wanting it to, but I want to check a value from one of the fields that I have retrieved. I am lost as how to retreive just the field. If I have to create another dataset to do the work what is the point of using the drag and drop control? I would really like to just access the dataset fields as needed.
View 2 Replies View RelatedThere has to be a better way (less code) to grab the data in one field than:string sql0 = "Select PSI from agentRate where agent='" + agent + "'";
SqlCommand command0 = new SqlCommand(sql0, conn2);SqlDataReader dr0 = command0.ExecuteReader();
string PSI="";while (dr0.Read())
{PSI = (string)dr0["PSI"];
}
dr0.Close();
Any Thoughts?
Hello sir,I have installed .net1.1version on windows2003 operating system.I have also installed sqlserver2000 on the same system.My problem is that when i am trying to get data from sqlserver from asp.net program i am getting error as 'access denied to user NT AUTHORITY/NETWORK USER'.I request you to kindly suggest me with an appropriate solution.Thanking you.Please email me on:-aanandkumar786@yahoo.com
View 1 Replies View RelatedHi,
I need to access data across my sql servers . All the servers are 6.5. Think MS DTC is the solution. But how to implement the same. Can somebody give me step by step instructions.
Thanks in Advance.
Cheers
There is any tools or products that allow Oracle Users to access SQL 2000 data in realtime? I know how to go in the opposite direction using linked servers, but am not sure on this direction,
Thanks
David
Hi,
My source is Excel and one column has data in different languages. But when i try loading it to my Database errant data gets loaded.
I tried loading data to Flat file with no success.
Thanks in advance.
First let me give you a little back ground on me. I'm very new to the ASP, ASP.NET, Visual Studio, Sql Server, Frameworks....thing. I am coming over from a PHP/MySql background of over 5 years. The change over to VBScript and VB has been to tough and I have a basic liking for the Visual Studio 2005 and the ease of putting things together. However, I have come across something that to me seems like it should be relatively simple, but haven't been able to find the documentation or samples to describe what I'm looking to do.
Rough Need:
1. Start with a form will a couple labels and a singe textbox to get the lookup date from an user.
2. Query one table/view based on the users choice of date and select only one field of returned data.(Doing this by itself is not a problem and I can display my results in a Gridview, but this is where it starts getting tricky and the gridviews won't work for me.)
3. If there is something returned, I need to start a HTML table layout or possibly some form of a Gridview(I don't see how I would use the Gridview) and start a loop, adding the first returned row from this query into the first cell.
4. Now, based on that same User Date and the returned row value from the previous query, I need to query another Table/view and return another single field, which might return 1 or multiple rows, which I need to start a loop to display unique items in cells under the first on above.
5. Based on the original User Date and each returned row from the first query, I need to query two other Table/views and get some additional information. 4-5 fields will be returned and be displayed on one row in the number of necessary columns.
6. This would finish the first row from the first query, so I would need to loop back up to see if there were any further results and continue looping until the get to the last of the results from the first query.
7. Finally, I would just need to close up the Table/gridview.
The basic results I'm looking for would be similar to the following:
Results for 10/11/2005
Field name 1
Field name 2
Field name 3
Field name 4
Field name 5
First Result from query 11 of 4 results from Query 2, but only 1 unique result
Info from Query 3
Info from Query 3
Info from Query 3
Info from Query 4
Info from Query 4
Info from Query 3
Info from Query 3.
Info from Query 3
Info from Query 4
Info from Query 4
Info from Query 3
Info from Query 3
Info from Query 3
Info from Query 4
Info from Query 4
Info from Query 3
Info from Query 3
Info from Query 3
Info from Query 4
Info from Query 4
Second Result from query 1First result from Query 2 after looping though the first query Second result from Query 2 after looping though the first query
Info from Query 3
Info from Query 3
Info from Query 3
Info from Query 4
Info from Query 4
Info from Query 3
Info from Query 3.
Info from Query 3
Info from Query 4
Info from Query 4
Info from Query 3
Info from Query 3
Info from Query 3
Info from Query 4
Info from Query 4
Info from Query 3
Info from Query 3
Info from Query 3
Info from Query 4
Info from Query 4
It seems me from what I have read and slowly figuring out, is that I should be able to directly access the DataSet returned by four SqlDataSources, one for each of the above querys and then just write my own VB to handle the necessary looping, table format and such. I can easily add the for SqlDataSources to the page and add a Gridview for each one and get 4 separate chunks of info, but can't see a way with GridViews to intermingle the info like displayed above.
So, if it can be done with Gridviews, then I would love to see how that is done. But, if someone could explain to me how I access the DataSets directly that I get from the 4 SqlDataSources, then that would be ok too. I have figured enough out with VB, that I can write the code to do my looping requirements, if I can just access the information I get back. Thanks for reading all the way through this long post.
Jack
Can anyone point me in the direction of code that will allow me to acce3ss the data held in an SQLDataSource.
The Control is link Selection Staement has been set at run, what I want to do is loop thru any data that is rertrieved, setting oter controls on the page depending on values
Thanks
Steve (I have not got much hair left, please help soon)
Hi,
How do we set credentials or contex to a thread.
I create a new thread and within that thread if I am use a connetion string with Integrated Security=True" to talk to the SQL Server, however it seems that the new thread's context/identity is blank and hence failing the SQL Server connection.
Please help.
Thanks
I was wondering if you guys know of a good site that talks about programmatically accessing and displaying data from a sql server 05 database in ASP.NET 2.0.I want to have a data adapter in a dataset, but I would like to create my own class file and pull the data from the adapter through code into the class. Is this the best way? Im wondering about the best practices while learning this new technology. Any articles provided would be appreciated. Thanks!
View 2 Replies View RelatedI have written 5 content-management systems and am getting a little bored writing a lot of the same functionality and tweaking it for different datamodels. Is there a way within .NET to have visibility of a database's structure (ie, data type, column names, foreign keys etc)? I'd like to write up a dynamically generated form for any given table, displaying appropriate form controls based on data type and foreign keys.
View 7 Replies View Related