Accessing Text Box Value In Report Header
Nov 22, 2007
Hi,
I have a report with 2 tables (table1 and table2) in the report body. I have txtempname kept in table 1. I access the textbox value in the header using the following expression
=(report!txtempname.value)
This works fine. However when table2 gets populated on of the subsequent pages, the value in the header disappears. It is visible only for the 1st 10 pages where the table 1 data is there.
How to make sure that the value of the header displays for all the pages
thanks
Killy.
View 3 Replies
ADVERTISEMENT
Mar 13, 2008
I need some help. I am writing a report in SSRS 2005 that I then need to export to Excel. When I put a report header I would expect the header to not display in the Excel spreadsheet until the Print Preview or the Print. The report footer works just fine I put some text in the footer, and it shows up in the footer. The header though, shows up as a row in the Excel spreadsheet that then causes columns to merge. How do I get the report header to act like a page header?
View 1 Replies
View Related
May 13, 2015
I am making a book-like report, I am using a report that has a header and calling a sub-report that has it's own header. However the sub-report header is not showing on the parent report. Parent report header is prevailing over the sub-report. Is it possible to have both headers displaying?
View 3 Replies
View Related
Nov 6, 2007
Hi Friends,
There is a one header in the report, when I publish and hit the report in IE(internet explor) the header appears fine on first page when I go to next page this header does not appear.
But in mozilla the header is visible on every page of the report. so it is working fine in mozilla.
I donot why it is happening?
Your help is highly appreciated.
Thanks
Novin
View 1 Replies
View Related
Mar 20, 2008
Hi,
I am trying to load data from a csv file into a sql table. The csv file has 30 columns and 40-50 rows.
Here is an example of the csv file
Header: Painting, DryWall, Flooring
Row1: 100, 200, 300
Here is an example of the Department lookup table
DeptNo, DeptName
11, Painting
22, DryWall
33, Flooring
I have to load the sql table like this
DepNo, Cost
11, 100
22, 200
33, 300
I tried to read the csv with/without headers, couldn't find a way to get the header as I was reading through the rows to get to the DeptNo.
Any ideas. Any help is appreciated.
Thanks.
View 6 Replies
View Related
Jun 22, 2015
How to display the logo in middle of report header , The logo is embedded in the Image folder . The column of the report  are static. we are using SSRS 2008
View 6 Replies
View Related
Dec 27, 2006
Does anyone know a way to display the header of a sub report when the sub report is part of a main report? Im able to get the main report and the sub report to display properly, but the header of the previously developed/tested sub report will not display when embedded in a main report.
Thanks,
MP
View 4 Replies
View Related
Apr 16, 2015
I am working on reports in SSRS 2008 (not R2)... There are some reports with parameters that are hidden when the report is accessed through normal URL using ReportViewer.asx..The thing is that these hidden parameters need to be visible when the report is accessed using SSRS Report Manager.
View 3 Replies
View Related
Jun 22, 2007
All,
I have a report that grows horizontally as it contains a matrix. In the header section of the report, I have items such as Title and time stamp in text boxes. How can I make these items align in the center if the report grows horizontally, it looks kinda odd with report title not being in the center? Any input will be appreciated.
Thanks.
View 1 Replies
View Related
Feb 20, 2008
Dear all,
The report I am trying to build are grouping the data by CATEGORY AND SUB-CATEGORY as shown below.
Product Category
Category1 Total: 5
Sub-Category1 2
Sub-Category2 3
Is it possible to put a static text above the Sub-Category group header row as shown below.
Product Category
Category1 Total: 5
Product Sub-Category (this is the line of text i want to added above the subcategory group header.)
Sub-Category1 2
Sub-Category2 3
Regards,
Yu
View 7 Replies
View Related
Nov 28, 2005
I would appreciate some help on a procedure that I have. Using BulkInsert, I would like to import records from a text file. The issue Ihave is the file contains a header - '1AMC_TO_Axiz' and a footer'1AMC_TO_Axiz2". Using a format file, I can get the import to work byediting the file and removing these two entries. Is there a way tosetup the format file to skip these two entries? My file currentlylooks like this:7.0161 SQLCHAR 0 50 "|" 1 keyMemberNo2 SQLCHAR 0 10 "|" 2 fldEffdate.................16 SQLCHAR 0 10 "
" 16 fldNewRecordThanksCharles
View 3 Replies
View Related
Feb 7, 2008
Hello, I'm pretty new to SSIS but so far what I have is a package that exports a SQL Server table to a text file. I needed to add a dynamic header that had the date and time of creation. Now I need to know how many records are being exported and put that number into the header.
For the header I am using a script task in the control flow which works well to put the creation date in the header. The script runs and writes the header and then the data flow exports and appends the records to the same text file. It seems to me since the script runs before the data flow I won't know the amount of records until after the data flow is done.
Maybe I could write the header after the data is gathered but before it is exported. Can anyone make some suggestions?
Basically the text file would be:
2/6/2008
154
Data
Data
Data
...
the 154 would be the total number of records to follow.
While I'm at it can someone tell me how to access the destination file path in the flat file connection? Right now I'm just hardcoding the path into my script.
Thanks,
Gunner
View 5 Replies
View Related
Apr 2, 2007
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
View 1 Replies
View Related
May 30, 2007
Hi,
I need to create a report header that will only be shown on the first page. And I want to use the built in header system that is included with report. I can't create a custom header on the body part because I am using multiple columns for report rendering. Currently the header system either displays the header on all pages or it shows in all pages except the first or last page. Any help is greatly appreciated. Thanks.
View 4 Replies
View Related
Jul 13, 2007
Can any one tell me what to use to substitute Table in report Header?Or is there any other way?Because when i am using Textboxes align horizontally as replace to table,to align to my table in the body,when i exported it to excel,ive got problems in alignment in cell,Thanks
View 7 Replies
View Related
Jun 13, 2006
How can I
create a header that will only appear on the first page? The page
header doesn't seem to have an expression area that would accomplish
this and globals are not useable in table headers.
Thanks
View 3 Replies
View Related
Jan 25, 2006
I am creating a report which consists of data in two columns. I've set the Body section to have 2 columns in it. This works fine until I start working with the report header. I do not want a page header that shows up on every page, I only want a header on the first page, a report header.
I first tried to hide the header by placing it in the Page Header section, then putting in the "page > 1" expression in the visibility property. This does what I want, except a large blank space is present at the top of my report (the header is about 1.2 "). This is unacceptable.
So my next test was to put the header into the Body section so that it only shows up in the beginning of the report. Because of this, I will need to remove the columns from the Body and make it only 1 column now. I decided to put the multi-column section into a subreport that has 2 columns and add this to the body of my report. But, this failed; the data appears in one column only. I can change the width the ensure it fits and set all other sorts of properties, nothing works.
I've researched both issues and found that these are both "bugs" in reporting services, although I cannot find thedocumented bugs.
Is there any workaround to putting a header onto only the first page of a multi-column report? Other reporting engines are able to handle this with ease, I'm suprised by Reporting Services lack of a "Report Header" section. I am an experienced .NET developer, so if there is a programmatic way through this, I am game.
Thanks,
Scott Steigerwald
View 13 Replies
View Related
Nov 16, 2007
Hi all,
I have a client report in which I have two images in the header portion. I have assigned two different images for the two image report controls.
The Problem is that the report is showing two images in only one system. (I ran the code which is available in SOURCE CONTROL, so the code is not the problem)
In all other systems the first image is getting repeated. The configuration is same and there is no change in HARDWARE.
Have anybody faced the same problem.....................
View 6 Replies
View Related
Jul 18, 2007
I embeded an image in my report.When i export it to PDF and Excel,it works fine but in HTML in does not show..
Can anyone tel me why..
Thanks,
Plengski
View 1 Replies
View Related
Jan 12, 2006
Hi.
I want some information stored in the database to be shown on the top of each page in my report. But in the report designer I get an error message if I try to drop a table in the header, and if I try to assign the value of a textbox in the header to e.g. "First(Fields!sometable.Value)", I get a runtime-error in the preview that says "... Fields cannot be used in page headers or footers".
How can I do this?
Regards, Tomsi
View 36 Replies
View Related
Dec 26, 2007
I have placed a textbox in the pageheader section of the report. In the textbox expression, I am trying to use a field . THis is an example of the expression in that textbox.
=First(Fields!ID.Value, "Jobstat")
Howver it gives an err "THE Value expression for textbox referes toa field. Fields cannot be used in page headers or page footers"..Is there any other option that I have? I need this expression/field to be a part of page header, but not table header.
Also, pl note that I have tried to place the field expression in a text box in the body of the report, and then refer to that text box in the page header or footer.However, when I do that, my expression does not appear on any pages of the report, only appears on the last page of the report.
View 5 Replies
View Related
Apr 25, 2008
Hi,
My full text search on 2 millions records is taking time to show the result.
I have created full text catalog in RAM drive to make the retrival process faster.
But still its taking more than 1 minute to get the matching pattern.
I am using SQL server 2005. I have 2 columns (id,text) in my table..
This is my unique index script
USE [SAMPLE]
GO
CREATE UNIQUE NONCLUSTERED INDEX [ui_productid] ON [dbo].[Products]
(
[id] ASC
)WITH (SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF) ON [PRIMARY]..
This is my primary key index script..
USE [SAMPLE]
GO
ALTER TABLE [dbo].[Products] ADD CONSTRAINT [PK_Products] PRIMARY KEY CLUSTERED
(
[id] ASC
)WITH (SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF) ON [PRIMARY]..
This is my query..
SELECT D.[id], D.productname
FROM dbo.Products AS D
WHERE CONTAINS(productname, 'ford')
What should i do to show the result in 3-4 seconds.
View 1 Replies
View Related
Feb 28, 2007
I've built a fairly straight forward report in RS that looks normal in preview mode and in PDF format with out any issues.But when I export it to Excel report header is not appearing in each page.Any ideas as to why this is occurring?thanks in advance,Ramesh KS
View 1 Replies
View Related
Oct 4, 2006
I have a report that I put links to other reports in the page header.
When I click on those links, I get the error:
"source of the report definition has not been specified"
If I move the links to the body of the report, they work fine.
Is this a bug or a limitation, and will we eventually be able to put links in the header?
Thanks!
BobP
View 3 Replies
View Related
Sep 1, 2006
I have a matrix report, which looks like the following:
Header C Header D
Column A Column B Column C Column D
Column A and B are Row Group columns in the matrix. Column C and D are the details columns. How can I add column header to column A and B. Seems I cannot do it in Reporting Services 2005.
Fan
View 8 Replies
View Related
Jun 14, 2006
After finding out that SSRS doesn't directly support databound items in the header or footer, I found the workaround from Microsoft yesterday at http://msdn2.microsoft.com/en-us/library/ms159677.aspx. The problem is that their solution only works for the first page of the report, so it's basically useless! Because this is an image, it also means the workaround of using a parameter doesn't work, either.
Does anybody have any advice? Is there a solution to this problem?
View 10 Replies
View Related
Oct 22, 2007
Is there any thing like Report header in SSRS ? As a work around I am using a Rectangle control in the page header which I make visible if page number is 1 otherwise not visible. But if its invisible only the other items in the header seem to move up while the body height remains unchanged which I do not want. I want the body height to increase if the Report header is absent. Please let me know if I am missing something or if the SSRS has something like Report header already.
View 6 Replies
View Related
Mar 15, 2007
I have report with large records and many columns
I would like to freez header and specific column like excel
I tried to freez header it self it's worked
I tried to freez a column it self it's worked
when I tried to freez both in same report it does not work..
any help??
View 1 Replies
View Related
Jan 9, 2007
I have a report that is being called via stored proc, and i want to group by contract. when report gets generated i get multiple contracts info. but will be grouped/sorted by contract.
please how can i have a group header and also a group footer to show a summary of each contract information with some calculated fields in it.
i may get 100 records related to 10 contracts , 10 rows for each contract.
as soon as the first contract info is shown on the report it has to show a summary related to the first contract in the group footer, and then continue populating the second contract info and so on.
Please i am totally new to reporting and help would be appreciated. thank you all.
View 2 Replies
View Related
Oct 24, 2007
Is there anyway to create a Report Header in SQL Reporting Services?
I am guessing "no", but I have to at least try and ask away.
Okay, I have had reports where on the first page they want a report header, and then on the 2nd and the consequent pages they want a page header. This is simple, in the Page Header I put the text box(s) for the Report Header in one Rectangle and then the text box(s) for the Page Header in another Rectangle, stack the Rectangles on to of each other, and set the visibility property of the panels accordingly.
I also see on the table control (which I am using on my report), you can set the table header row(s) to either print on every page or only on the first page.
Neither of these options will work for the report I am trying to build based on a Crystal Report.
I have a page header that needs to appear on every page including the first page. It is about 3/8" tall. And then there is a requested report header that should only appear on the first page. The report header is about 2" tall. So if I try my trick I used before, I will have 2" inches of white space on the 2nd and consequent pages. The Report Header would correctly print on the first page, but the size of the Rectangle (even if the visible property is set to false) will still eat up white space.
Is there anyway around this, or will I need to have the users redesign their report to fit SQL reporting services?
Let me know if you have any ideas.
Thank you,
T.J.
View 8 Replies
View Related
Nov 9, 2007
I'm trying to get the following sql to work in a textbox. I have select the textbox properties and it's value is
=datename(m,dateadd(m,-1,current_timestamp))
I would like the results of "October"
however I get the following error
The value expression for the textbox €˜textbox1€™ contains an error: [BC30451] Name 'datename' is not declared.
I'm pretty new to this so I do not know excatly what that error means.
Any help for me out there?
Thanks,
Cardgunner
View 11 Replies
View Related
Jun 7, 2007
I need some assistance with Microsoft SQL Reporting Services. My problem is quite straight forward. I am using a ASP.NET 2.0 ReportControl locally on my machine and I would like to access a report which is hosted on another server within the network. How could I access this report. I am getting the following error:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %>
<%@ Register Assembly="Microsoft.ReportViewer.WebForms, Version=8.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"
Namespace="Microsoft.Reporting.WebForms" TagPrefix="rsweb" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<rsweb:ReportViewer ID="ReportViewer1" runat="server" Font-Names="Verdana" Font-Size="8pt" Height="400px" ProcessingMode="Remote" Width="400px">
<ServerReport ReportPath="/bdsvr16/Pages/Reports/Phishing/WF/Country+Report" ReportServerUrl="http://bdsvr16/reports/" />
</rsweb:ReportViewer>
</div>
</form>
</body>
</html>
Thanks.
View 4 Replies
View Related
May 22, 2008
Hi all,
I'm trying to embed a report into a CRM IFrame. So I have the report created in Business Intelligence Visual Studio 2005, but I need to display it with none of the header details SRS displays by default.
Using the following URL I included rc:toolbar=false and rcarameters=false but they don't seem to make any difference. I basically need to display the report content as if it were part of that page and not an SRS hosted page.
https://server/Reports/Pages/Report.aspx?ItemPath=%2fAllpress_MSCRM%2fCustomReportsForCRM%2fa&rs:Command=Render&rc:toolbar=false&&rcarameters=false&rs:ClearSession=true&type=1&typename=account&orgname=Allpress&userlcid=1033&orglcid=1033
Anyone have some pointers for me?
Kia
View 1 Replies
View Related