AcquireConnection Error - Lookup Component
May 10, 2006
Hi,
Trying to get a particular SSIS is package working - while running the Package Installation wizard a package is reported with the following errors:
AcquireConnection method fails with error code 0xC0202009
Then Lookup fails validation and returns code 0xC020801C
The odd thing is the Lookup does not exist in the package, it did exist at one point but was deleted.
I have tried searching the XML and can't find any reference to the Lookup
Any suggestions appreciated...
Thanks,
John
View 4 Replies
ADVERTISEMENT
Aug 18, 2006
Hi,
I am getting this error in a Lookup component:
Error: 0xC020901E at Load_tblDelayfact, Lookup_DL_CODE [184]: Row yielded no match during lookup.
Error: 0xC0209029 at Load_tblDelayfact, Lookup_DL_CODE [184]: The "component "Lookup_DL_CODE" (184)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (186)" specifies failure on error. An error occurred on the specified object of the specified component.
Although the Lookup table is filled in with the following SELECT ststement:
SELECT DISTINCT DL_CODE, DL_COMMENT
FROM DL_Temp AS T1
WHERE NOT EXISTS(
SELECT * FROM DL_CODE AS T2
WHERE
T1.DL_CODE = T2.DL_CODE
AND
T1.DL_COMMENT = T2.DL_SENT_COMMENT
)
So there is no way that there is a record in DL_Temp (The data source) that does not exist in DL_CODE( the lookup table). Indded, I did serveral queries and tests to check that no such data exist and I found that no such record exists.
Please help me and tell me what can be the reason for this error. I used the same package on the same data yesterday and every thing went fine. Is that a bug that any of you faced before.
Thanks,
Aref
View 3 Replies
View Related
Oct 8, 2007
Hi all,
I recieve an error when I use the Lookup component in SSIS that reads:
Statement(s) could not be prepared.
I'm using a SQL 2005 DB as the source which runs into a lookup table and is use to compare records with an SQL 2000 Database. I've created connection managers successfully to both these databases. When trying to use the results of an SQL Query for the lookup to the SQL 2000 database (which is a linked server) and I try to map the columns, the error pops up and exits out of the lookup properties Window
The details to the error read:
Program Location:
at Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.Connections.SQLTaskConnectionOleDbClass.PrepareSQLStatement(String sql, Boolean bypassPrepare)
at Microsoft.DataTransformationServices.Design.DtsConnectionCommonControl.CheckSqlQuery()
I'm looking to use the results of this comparison to output in some form of a report. Ideas would be greatly appreciated!
View 36 Replies
View Related
Jul 5, 2006
Has anybody seen this issue already?
If you try to "enable memory restriction" from the Lookup component GUI you need to input both 32 and 64 bit size of maximum memory. However when clicking "OK" on the editor you get a message like :
TITLE: Microsoft Visual Studio
------------------------------
Error at Update Execution Logs [Lookup folder path 1 [4429]]: Failed to set property "MaxMemoryUsage64" on "component "Lookup folder path 1" (4429)".
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0204006 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
You can only set the properties directly for mthe Properties window (F4).
I think this is a post SP1 bug in Visual studio designer...
View 5 Replies
View Related
Mar 25, 2007
We have built a custom component that is run in a dataflow contained in a sequence container, which in turn is contained in a loop. Transactions are enabled on the sequence container in such a way that if one step in the loop fails, that step is rolled back but the loop continues. Now, whenever anything happens causing a rollback in one of the iterations, sometimes the call to AcquireConnection in the next iteration will fail with the following error:
Error: 2007-03-25 09:47:31.98
Code: 0xC0047062
Source: KODPLAN Surrogate Key KO_ID [8204]
Description: System.Runtime.InteropServices.COMException (0x80131904): Exception from HRESULT: 0x80131904
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction)
at Intellibis.SqlServer.Dts.SurrogateKeyTransform.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90wrapper, Object transaction)
End Error
Is there a way to avoid this? It causes that particular iteration to fail as well as the one causing the rollback.
Regards,
Lars
View 5 Replies
View Related
Jul 27, 2006
Has anyone seen this strange behaviour?
I have a package which loads the fact data from Stage into Warehouse database. This packages normally handles early arriving facts. In that package I use lookup to check the dims which exists, and where they don't I populate the dimension and use the surrogate key to load the facts. This works fine.
I had a request to load 7 years worth of historical data. Instead of re-writing the package I took the package which handles early arriving facts and deleted the section which handles early arriving facts. I knew all the dimensions already exists and I dont want to hinder the performance when I load millions of rows. During testing I found something very interesting.
If you have configured error path in the lookup component and removed the error path later, the package will NOT fail (won't produce error) even if the lookup can't find matching values.
Correct Behaviour Example 1:
[1] Stage fact table has 2 records, with product code 1 and 2.
[2] Warehouse Product table has only product code 1.
[3] Source - Lookup - Destination in the data flow task. Error port on lookup is not configured.
[4] From source we read 2 records, and the package will fail at lookup as it can't find Product Code 2.
Correct Behaviour Example 2:
[1] Stage fact table has 2 records, with product code 1 and 2.
[2] Warehouse Product table has only product code 1.
[3] Source - Lookup - Destination in the data flow task. Error port on lookup is configured to go to RowCount.
[4] From source we read 2 records, and the package will run successfully. It will put one record into warehouse table and send the invalid record into RowCount.
Incorrect Behaviour Example 3:
[1] Stage fact table has 2 records, with product code 1 and 2.
[2] Warehouse Product table has only product code 1.
[3] Source - Lookup - Destination in the data flow task. Delete the configured error port from lookup.
[4] From source we read 2 records, and the package will run successfully. It will put one record into warehouse table and discard the other.
My understanding if the error port is NOT configured as shown in example 2, it should fail as shown in example 1.
Am I missing a point or is this suppose to be a correct behaviour or is it a bug?
Thanks
Sutha
View 1 Replies
View Related
Jan 29, 2007
Hi,
i am doing a lookup to insert new records when the lookup has failed.
this works perfectly normally. however when my recordset has a name-column of type string with width 5 and my lookup-table has a name-column of char(20) the lookup will always fail and henc always inserting new records although the name "foo" should match.
is there a workaround for this, or do the compare-columns always have to be of the same type/length ?
View 1 Replies
View Related
Dec 5, 2006
Need to ask three questions regarding this component I am creating programatically:
1) How do you select "Modify the SQL statement" programatically.
2) How do you change the actual sql.
3) How do you add a parameter, also programatically.
I have manged to select "Enable memory restriction" by using
instance.SetComponentProperty("CacheType", 2);
but can't add a paramater and modify sql statement. Have used
instance.SetComponentProperty("SqlCommand", statement); and
instance.SetComponentProperty("SqlCommandParam", statement);
with no luck. Any ideas, have searched the web but found nothing.
Thanks.
View 1 Replies
View Related
Jan 17, 2008
Let's say I've a dimension with over 20 million rows. During my ETL, I need to replace the business keys with all the surrogate keys from this large dimension. The logic choice is to use the Lookup component. But does the Lookup component load all the 20 million rows into the memory? For a large dimension surrogate key lookup, what is the typical approach? TIA.
View 5 Replies
View Related
Mar 14, 2008
Hi,
Is there anyone out there develop raw file lookup component?
If not, is there anyway to read a raw file except using raw file source adapter?
Many Thanks,
XL
View 4 Replies
View Related
Apr 12, 2007
i am using a lookup component to do a typical SCD. Compare the Natural keys and if they are the same -- REdirect the rows and do whatever, If not present -- means the Error Rows -- redirect and do whatever.
WHen I use the component to do a Historical Load (which means -- there are no rows are in the Destination table) and put the Memory to Partial Cache -- the Data Flow STalls after about 46,000 rows, it just doesnt complete after that. But the moment I switch it to Full Cache -- it flows -- But Partial is what I am supposed to be using -- keeping in mind -- the Incremental Loads. Why does the component stall ?
I had used Partial Cache in an earlier project -- with a 18 Million Row Table --(albeit for incremental load) and it worked fine (though is was slow -- but tleast it worked) -- but now I am trying to load just 300,000 rows but it stalls.
I am using a 2GB RAM machine -- and set the Memory to 750 MB/500 MB nothing worked
I tried two different machines -- same thing happened.
Any insight will be appreciated.
View 5 Replies
View Related
May 10, 2006
Is it possible to reuse a Lookup component which is configured with Full chaching?
My requirement is as follows....
A input file have 2 columns called CurrentLocation and PreviousLocation. In the dataflow, values of these two columns needs to be replaced with values from a look up table called "Location".
In my package i have added two LookUp components which replaces values of CurrentLocation and PreviousLocation with the values available in the table "Location". Is there any way to reuse the cache of first lookup component for second column also?
View 9 Replies
View Related
Aug 15, 2006
Hi,
I am facing a problem with Lookup component in SSIS. I need to lookup from a transaction table for getting some info, But when im trying to implement the same, the Pre-Execute step itself got failed saying like,
[DTS.Pipeline] Information: The buffer manager failed a memory allocation call for 524264 bytes, but was unable to swap out any buffers to relieve memory pressure. 9467 buffers were considered and 5956 were locked. Either not enough memory is available to the pipeline because not enough are installed, other processes were using it, or too many buffers are locked.
[Tracer [19717]] Error: A buffer could not be locked. The system is out of memory or the buffer manager has reached its quota.
[DTS.Pipeline] Error: component "Tracer" (19717) failed the pre-execute phase and returned error code 0xC020204B.?
Component Tracer is the Look up. Tracer is having around 6.5 mil records. Is there any way to allocate more buffers thru buffer manager? Or is there any alternative to solve this problem? FYI, the hard disk free space is more than 250 GB.
Thanks in advance.
View 13 Replies
View Related
Aug 8, 2006
I have written an SSIS Package that connects to an Oracle database through SQL Authentication. Whenever I execute the package in BIDS it executes without a problem but when I try to schedule the package as a Job I recieve an AcquireConnection Error. Any help?
I have tried the solutions outlined in http://support.microsoft.com/kb/918760 and have read through the KB but have found few solutions that pertain to connecting to remote Oracle databases through SQL Authentication. Any help would be much appreicated.
View 7 Replies
View Related
Sep 26, 2007
I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute
Taking a snapshot of the reference table
Taking a snapshot of the reference table
Building Fuzzy Match Index
component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
Any ideas on what else could be causing this?
View 4 Replies
View Related
Mar 14, 2007
I'm creating a small test package that copies a value from an Excel 2007 worksheet into a SQL 2005 database (SP2). When I do an Execute Task, I get the following error:
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager \loripMandEScorecardsSQLQueryExample.xlsx failed with error code 0xC0202009.
However, if I do a "Preview" in the Editor for this same Excel Source task that fails, the data comes up as I would expect. What am I missing?
Thanks in advance!
View 2 Replies
View Related
Feb 6, 2007
I have a requirement to access a lookup table from within an SSIS Transform Script Component
The aim is to eliminate error characters from within the firstname, lastname, address etc. fields by doing a lookup of an ASCII code reference table and making an InStr() type comparison.
I cannot find a way of opening the reference data set from withing the transform.
Regards
Tim
View 3 Replies
View Related
Feb 24, 2006
I am using a lookup component in a SSIS data flow. The lookup is a select to a foxpro table. THe lookup works fine with full cache selected. I cannot get the lookup to work with a partial or no cache. I have the latest Foxpro OLE DB driver installed which I understand to support paramaterized queries. Has anyone had success with using cached lookup to Foxpro? Does anyone know how to set the lookup properties of sqlcommand and sqlcommandparam? I am unable to find any examples in BOL or on the web.
Here are some details. IF I go with "use a table or a view" option with the default cache query I get initialization errors
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E14 Description: "Command contains unrecognized phrase/keyword.".
In the advanced editor I see
SQLCommand set to
"select * from `kcf`"
and SQLCommandParam set to
"select * from
(select * from `kcf`) as refTable
where [refTable].[patkey] = ? and [refTable].[dayof_stay] = ? and [refTable].[modifier] = ? and [refTable].[kcf_code] = ? and [refTable].[source] = ? and [refTable].[kcf_time] = ?"
I believe the above error is because Foxpro V7 does not support the inner subselect . In addition the query contains CRLF without a continuation character (";").
If I remove the CRLF in the sqlcommandparam query, using the advanced editor, I get this design time error "OLE D error occurred while loading column metadata. Check the sqlcommand and sqlcommandparam properties". The designer requires both properties to be set, its unclear to me how the interact.
I cannot find any examples in BOL or on the web on how to set these 2 properties. Can someone give me a few guidelines?
I can get past the design errors by changing sqlcommandparam to a plain select that is VFP 7 compatible ( I removed the subselect and the square brackets):
select * from kcf as refTable where refTable.patkey = ? and refTable.dayof_stay = ? and refTable.modifier = ? and refTable.kcf_code = ? and refTable.source = ? and refTable.kcf_time = ?
But then I get a runtime error
[lkp_lab_worst_value [6170]] Error: An OLE DB error has occurred. Error code: 0x80040E46. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Visual FoxPro" Hresult: 0x80040E46 Description: "One or more accessor flags were invalid.".
[lkp_lab_worst_value [6170]] Error: OLE DB error occurred while binding parameters. Check SQLCommand and SqlCommandParam properties.
Any idea on what I should try next ?
View 3 Replies
View Related
Oct 11, 2006
I open a package in SSIS I get the following errors.Validation error. Create TestKeys For Scan Records: TestKeys Table in AEISIT Import db [1]:The AcquireConnection method call to the connection manager "AEISIT Upload" failed with error code 0xC0202009. ScanUpload.dtsx 0 0 I open my connections in the connection manager and set them to the (local) server and the errors go away.Then I close and reopen the package and the errors are back.What am I doing wrong??
View 2 Replies
View Related
Jul 14, 2006
I've got an SSIS package that I've been testing all week and it runs fine in Visual Studio. The package uses an OLE DB connection manager to access the dBase files using the Jet Provider. The dBase files are stored on a remote file share. There are a series of identical files held in different dated folders. I use a ForEach loop to move through the folder list and import the data as I go. When I deploy it to the server and try to run it, I get the following:
The AcquireConnection method call to the connection manager "Aloha" failed with error code 0xC0202009.
Aloha is the ConncetionManager to the dBase files. I've searched everywhere I can for ideas on how to solve this. I've made the SQL Agent Service is running under the same account I used to author the package. I've made sure that the package is using Server Storage. Everything looks like it should be working.
Can anyone give me any other items I can look into?
Thanks!
Barry Austin
View 4 Replies
View Related
Nov 4, 2015
I have an Excel file which contains some data. I want to load that into a SQL server Table. Here are my conditions :
1. If the table doesn't have any matching records from the Excel file, then my DFT should load the data from that Excel to the Dest Table.
2. If the table has even one or more matching records, then the DFT should not process at all, instead I should send an email to the business stating that there are some matching records and hence the package is not process...ed.
P.S. If i use Lookup, I have two matching and non-matching output. which will process the non matching records into the table and matching can be redirected to any flat/Excel file. But i don't want to do this. I just want to lookup the Sql Server table and excel.
It'll be good if there is an additional option in the Lookup "Fail component on matching records".
View 3 Replies
View Related
Aug 11, 2005
I have a SQL Server Agent job with a step to execute an SSIS package. The package has as one of it's connection managers the Connection Manager For Excel Files. When I run the job it fails every time. I have implemented logging and in the OnError event it states "The AcquireConnection method call to the connection manager "LOBMappingExcel" failed with error code 0xC0202009".
View 9 Replies
View Related
Dec 7, 2005
I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
View 73 Replies
View Related
Feb 17, 2006
The package runs fine if I run it by itself. Unfortunately we want to call it from another package and when we do so it fails everytime with the following error; "AcquireConnection method call to the connection manager "BPCSF" failed with error code 0xC0202009." This package is calling an AS400 and pulling data from it into a staging environment. The task that is failing is 4th task on the list and is the 3rd task to call the AS400 environment. If I need to provide more information I would be happy to do so. Any help would be greatly appreciated. Thanks!
-Krusty
View 1 Replies
View Related
Oct 9, 2007
I can run this package in Studio and it works fine, but when I run it from SQL Server Agent, it throws this error. Does anybody know what would cause this problem. This appears to occur during validation for the package because none of the data flow steps run. The connection being used is the same connection used in all of the data flows. If validation is done in order, then prior steps using the same connection are passing validation.
Thanks,
Steve
View 5 Replies
View Related
Aug 20, 2007
Error at Text Inbound Task [SQL Server Destination [9]]: The AcquireConnection method call to the connection manager "Server.Northwind" failed with error code 0xC0202009.
Error at Text Inbound Task [DTS.Pipeline]: component "SQL Server Destination" (9) failed validation and returned error code 0xC020801C.
Please keep me posted with alternate work around(s) /solution(s).
View 1 Replies
View Related
Dec 27, 2007
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
View 3 Replies
View Related
Oct 26, 2007
Hello,
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Please advice.
Thank you.
View 7 Replies
View Related
Apr 21, 2006
1) We are writing a custome Source component for Oracle with OCI calls, Could some one please let me know how to Enable Error Handling for the Same,
2) Is it possible to write Custome Error Handeling Component for SSIS? if yes could you please help me on how to write it.
Thanks in advance.
View 1 Replies
View Related
Jan 23, 2007
Hi,
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
Appreciate a help.
Gulden
View 4 Replies
View Related
Feb 14, 2008
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
View 5 Replies
View Related
Apr 27, 2007
Hello everyone,
I am struggling with this error and it's starting to get to me!
I have setup a simple project with just a data flow task. In this task, it retrieves a simple record "Select * From Table1 WhereId=1". The connection is an OLE Db connection using Advantage Oledb Provider (a provider for accessing dBase). It is accessing a Novell network drive. I have setup the package to both "EncryptSensitiveWithPassword" and "DontSaveSensitive". Both times i have received this error.
The funny thing is, when I set the package to "EncryptSensitiveWithPassword" and I setup a job to run the package, it never asks me for the password even though I set one up! I have a previous package (few months ago I made) that accessed the same database on the same Network drive and it works! It also asks me for a password when I try to modify or run the package (b/c I set it to "EncryptW/Password").
Can anyone give any light into this problem?
Thansk for all your support,
Adrian
View 1 Replies
View Related
Mar 24, 2008
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
View 2 Replies
View Related
