Add A New Column Between Columns In A Table

Mar 11, 2008

Can anyone help me how to add a new column between a column in sql server 2005

i have did this one in SQL Server 2000 like below.

1. Add a new column using ALTER statement

2. EXEC sp_configure 'show advanced options',1
GO

RECONFIGURE
GO

EXEC sp_configure 'allow updates',1
GO

RECONFIGURE WITH OVERRIDE
GO

3.Change the colid in syscolumns table using UPDATE Statement

- But its not working in SQL Server 2005...it throws an adhoc error for system catalog table

View 5 Replies


ADVERTISEMENT

How To Select All Columns Except One Column From A Table ?

Oct 6, 2006

Hi

I can't figure out how to do this and hope you guys can give me a hint....

I want to select all columns from a table except one column:

For example,


A table has 20 columns : {1,2,3.....20}

To select all of columns in a table, i could use
select * from table;

However, I want to select only column {1....19}

I do not want to type the column names in one by one in the SQL query,

is there a way to achieve this in a short form of Select?

Thanks,

View 15 Replies View Related

How To Update A Column With The Sum Of Two Columns In A Table

May 9, 2008



I have a simple question that is more about performance on my code for updating a column with the sum of two columns:

Example

Table = dbo.adding

c1 c2 c3Sum
1 2
3 5
4 6

Now if I just simple write

Update dbo.adding
set c3SUM = c1 + c2

This works, but there is a null in c1 or c2 then I know I can write this:


if exists (select * from dbo.adding where c1 is NULL)

Update dbo.adding

set c1 = '0', c3SUM = '0' + c2 where c1 is NULL

if exists (select * from dbo.adding where c2 is NULL)

Update dbo.adding

set c2 = '0', equals = c1 + '0' where c2 is NULL

Update dbo.adding

set c3SUM = c1 + c2

This works as well, but I am not sure how perficient it is being that from my understanding the code will evaluate the table three times and update it based on the criteria. If the table consists of 100,000 rows then this might not be a good solution

Is there a more proficient way to do this... I personally try to as little coding as possible to help increase performance. I know I can make this very complex and declare variables and put everything in a loop, but I personally think that would be less profient..

View 8 Replies View Related

Locking Column (cannot Drop Columns In The Table)

May 27, 2015

How can I pervert dropping the column in the table (probably some process doing that and I want to find it) ? I need to be able to modify but not alter / drop column .

View 4 Replies View Related

SELECT INTO A New Table All Columns Based On DISTINCT Value Of One Column

Oct 31, 2014

‘Trying to SELECT INTO a new table all columns of a table based on a DISTINCT value of one column so for example:

SELECT *
INTO new_table
FROM old_name
WHERE old_table.column IS DISTINCT’

View 4 Replies View Related

Split A Column String-value Into Multiple Columns / Inserting In Another Table

Aug 14, 2012

I have a table with a string value, where all values are seperated by a space/blank. I now want to use SQL to split all the values and insert them into a different table, which then later will result in deleting the old table, as soon as I got all values out from it.

Old Table:

Code:
ID, StringValue

New Table:

Code:
ID, Value1, Value2
Do note: Value1 is INT, Value2 is of nvarchar, hence Value2 can contain spaces... I just need to split on the FIRST space, then convert index[0] to int, and store index[1] as it is.

I can split on all spaces and just Select them all and add them like so: SELECT t.val1 + ' ' + t.val2... If I cant find the first space that is... I mean, first 2-10 characters in the string can be integer, but does not have to be.Shall probably do it in code instead of SQL?Now I want to run a query that selects the StringValue from OldTable, splits the string by ' ' (a blank) and then inserts them into New Table.

Code:
SELECT CASE CHARINDEX(' ', OldTable.stringvalue, 1)
WHEN 0 THEN OldTable.stringvalue
ELSE SUBSTRING(OldTable.stringvalue, 1, CHARINDEX(' ', OldTable.stringvalue, 1) - 1)
END
AS FirstWord
FROM OldTable

Found an example using strange things like CHARINDEX..But issue still remains, because the first word is of integer, or it does not have to be...If it isn't, there is not "first value", and the whole string shall be passed into "value2".How to detect if the very first character is of integer type?

Code:
@declare firstDigit int
IF ISNUMERIC(SUBSTRING(@postal,2,1) AS int) = 1
set @firstDigit = CAST(SUBSTRING(@postal,2,1) AS int)
ELSE
set @firstDigit = -1

[code]....

View 2 Replies View Related

SQL Server 2014 :: Columns List With And Without Identity Column In A Table?

Feb 24, 2015

I have the following 2 Query's - case when Table has no Identity Column and other with identity Column . I am planning to make it to single Query .

Query 1:
SELECT @ColumnNamesWhenNoIdentity = COALESCE(@ColumnNamesWhenNoIdentity + ',', '') + Name +'= SOURCE.'+Name
FROM sys.columns WITH(NOLOCK) WHERE object_id =
(
SELECT sys.objects.object_id
FROM sys.objects WITH(NOLOCK)
INNER JOIN sys.schemas WITH(NOLOCK) ON sys.objects.schema_id = sys.schemas.schema_id
WHERE sys.objects.TYPE = 'U' AND sys.objects.Name = 'Testing1' AND sys.schemas.Name ='dbo'
)

Query2:
SELECT @ColumnNamesWhenNoIdentity = COALESCE(@ColumnNamesWhenNoIdentity + ',', '') + Name +'= SOURCE.'+Name
FROM sys.columns WITH(NOLOCK) WHERE is_identity != 1 AND object_id =
(SELECT sys.objects.object_id FROM sys.objects WITH(NOLOCK)
INNER JOIN sys.schemas WITH(NOLOCK) ON sys.objects.schema_id = sys.schemas.schema_id
WHERE sys.objects.TYPE = 'U' AND sys.objects.Name = 'Testing2' AND sys.schemas.Name ='dbo'
)

View 8 Replies View Related

Transact SQL :: Select Multiple Columns From Table But Group By One Column

Jun 17, 2015

I have a SQL query like this

select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans] from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date) group by TransactionCode, CurrencyCode,TransactionAmount order by CurrencyCode

As per this query I got the result like this

CurrencyCode TransactionCode TransactionAmount No.OfTrans
AED     BNT    1     1
AED     BNT     12     1
AED     SCN     1     1
AED     SNT     1     3

[Code] ....

But I wish to grt result as

CurrencyCode TransactionCode TransactionAmount No.OfTrans
AED     BNT   13     2
AED     SCN     1     1
AED     SNT     11     7
AFN     BPC    8     6

[Code] ....

I also tried this

select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans]
from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date)
group by TransactionCode order by CurrencyCode

But of course this codes gives an error, but how can I get my desired result??

View 5 Replies View Related

SQL Server 2012 :: Querying A Supersession Two Column Table With Multiple Supersessions In Both Columns

Jan 29, 2014

I'm fairly new to SQL and am just setting up a Windows 8 app using an Azure SQL server. The issue I have is looking up a part number supersession and getting the latest number. One part number can have multiple supersessions (ie RTC5756 > STC8572 > STC3765 > STC9150 > STC9191 > SFP500160 ).The data I am supplied monthly has both the superseeded items and the supersession information in both columns and is not easy to decipher - for example:

Supersessions Table
----------------------

RTC5756 | STC9191
SFP500160 | STC9191
STC9191 | STC2951
STC3765 | STC9191
STC8572 | STC9191
STC9150 | STC9191

[code]...

The newest part number is kept in a separate table - called "source" - which in this instance is SFP500160. I need access to the latest part number but also to the part's previous numbers, due to the fact that some people may still be stocking them as an old part number and for them to search by. Is there an easy and efficient way of doing both a lookup for the supersessions and a join on the two tables to minimize the queries on the database?

View 9 Replies View Related

T-SQL (SS2K8) :: How To Vary Column Names In Cross Apply Based On Different Columns In Each Table

Feb 26, 2015

I am using CROSS APPLY instead of UNPIVOT to unpivot > one column. I am wondering if I can dynamically replace column names based on different tables? The example code that I have working is based on the "Allergy" table. I have thirty more specialty tables to go. I'll show the working code first, then an example of another table's columns to show differences:

select [uplift specialty], [member po],[practice unit name], [final nomination status]
,[final uplift status], [final rank], [final uplift percentage]
,practiceID=row_number() over (partition by [practice unit name] order by Metricname)
,metricname,Metricvalue, metricpercentilerank

[code]....

Rheumatology Table:The columns that vary start with "GDR" and [GDR Percentile Rank] so I'm just showing those:

GDR (nvarchar(255), null)
GDR Percentile Rank (nvarchar(255), null)
GDR PGS (nvarchar(255), null)
GDR Rank Number (nvarchar(255), null)
PMPM (nvarchar(255), null)

[Code] ....

These are imported from an Excel Workbook so that's why all the columns with spaces for now.

View 9 Replies View Related

SQL Server 2014 :: How To Update Values Based On Column Into Multiple Columns In Another Table

Jul 31, 2015

I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.

CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT)
INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE
CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT)
INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE

One way to achieve this is to write two update statements. After update, the output you see is my desired output

UPDATE H
SET CHANNEL1= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=1 -- updates only channel1
UPDATE H
SET CHANNEL2= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=2 -- updates only channel2
SELECT * FROM #Hori -- this is desired output

my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.

View 5 Replies View Related

Transact SQL :: Find Unmatching Columns Between Two Tables While Applying A Change Column Prefix Table

Nov 16, 2015

For our ETL process, we maintain a TransformationList table that has the source view and the destination table. Data is copied from the view into the table (INSERT INTO). I am trying to find column names in the Views that are not column names in the associated Table.

In the below example, want to end up with three records:

 1, View1, Column4
 2, View2, Column4
 2, View2, Column5

I have it almost working, except that there is a table, ChangeColPrefix table, that is used by the ETL process to change some of the view's column name prefixes. Some of the source views have column names with prefixes that do not match the destination table column names. Say view SouthBase has all the column names prefixed with SB - like SBAcct, SBName. And the Destination table of Area District has ADAcct, ADName. There would be a row in the ChangeColPrefix for SouthBase, SB, AD, 1, 2 that would be used by the ETL process to create the INSERT INTO Area District From SouthBase.

I need to use this ChangeColPreifx to find my unmatching columns between my source views and destination tables. With out that table SBAcct and SBName from SouthBase will not appear to match the columns of ADAcct and ADName, but they do match.

I want to end up with these three records as non-matching:

View1, Column4
View2, Column4
View2, Column5

View1 has Salumn2 and View2 has Salumn5, and they must be changed to Column2 and Column5 as per the ChangeColPrefix table before running the Select from INFORMATION_SCHEMA.COLUMNS EXCEPT Select from INFORMATION_SCHEMA.COLUMNS looking for unmatched columns.

/***** Set Up Test Data *****/
-- Create 2 test views
IF EXISTS(SELECT * FROM sys.views WHERE object_id = OBJECT_ID(N'[dbo].[View1]'))
DROP VIEW dbo.[View1]
GO
CREATE VIEW View1
AS SELECT '1' AS Column1 , '2' AS Salumn2 , '4' AS Column4;

[Code] ....

View 3 Replies View Related

SQL 2012 :: Split Data From Two Columns In One Table Into Multiple Columns Of Result Table

Jul 22, 2015

So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:

**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3

**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3

In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID

I am trying to create a table such as shown below:

Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich

This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.

For e.g

Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One

[Code] .....

The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.

View 4 Replies View Related

SQL Server 2012 :: How To Match Two Different Date Columns In Same Table And Update Third Date Column

May 30, 2015

I want to compare two columns in the same table called start date and end date for one clientId.if clientId is having continuous refenceid and sartdate and enddate of reference that I don't need any caseopendate but if clientID has new reference id and it's start date is not continuous to its previous reference id then I need to set that start date as caseopendate.

I have table containing 5 columns.

caseid
referenceid
startdate
enddate
caseopendate

[code]...

View 4 Replies View Related

How Can I Set Constant Padding Between The Columns Of The Column Chart(stacked Column Sub-type)?

Aug 2, 2006

Hi All,

I am working on a column chart type (stacked column sub-type) report.

Our customer requires us that the space(padding) between the columns should be a constant(including the space between the Y-axis and the first column). I know how to set the width of the columns, but I really don't know how to set the width of the space between them. The columns just varies the space between them automatically according to the number of the columns (the number of the columns is not certain).

Thanks a lot in advance!

Danny





View 2 Replies View Related

Dumping Rows Of 2 Columns Of A Table To A Different Table With Different No Of Columns

Sep 19, 2007



Hi,

I have two tables

Table Source
{

category varchar(20),
LastUpdate datetime
}



Table Destination
{


SubjectId varchar(20),
SubjectDate datetime,
category varchar(20),
LastUpdate datetime
}

Please note that the number columns are different in each table.
I wanted to dump the data of Source table to Destination table. I meant to say that the rows of 2 columns in Source table to last 2 rows of Destination table.
And also my oreder of the columns in Destination table will vary. So i need to a way to dynamically insert the data in bulk. but i will know the column names for sure before inserting.

Is there anyway to bulk insert into these columns.


Your quick response will be appreciated

~Mohan Babu

View 2 Replies View Related

Transact SQL :: Select And Parse Json Data From 2 Columns Into Multiple Columns In A Table?

Apr 29, 2015

I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:

I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.

1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.

SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B

If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.

2. My second question: How to i get around this error?

SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B,  fnSplitJson2(A.ITEM6,NULL) C

I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.

View 14 Replies View Related

SQL Server 2014 :: Creating A Table With Updatable Columns And Read-only Columns

May 26, 2015

Here is My requirement, I'm not sure if this is possible. Creating table called master like col1, col2 col3, col4 , col5 ...Where Col1, col2 are updatable - this can be done easily

Col3, col4 are columns in another table but these can be just a read only ?? Is this possible ? this is possible with View but not friendly with share point CRUD...Col 5 is a computed column of col 2 and col5 ? if above step can be done then sure this can be done I guess.

View 4 Replies View Related

Matching A View's Columns To It's Underlying Table's Columns

Jul 20, 2005

Hello,Using SQL Server 2000, I'm trying to put together a query that willtell me the following information about a view:The View NameThe names of the View's columnsThe names of the source tables used in the viewThe names of the columns that are used from the source tablesBorrowing code from the VIEW_COLUMN_USAGE view, I've got the codebelow, which gives me the View Name, Source Table Name, and SourceColumn Name. And I can easily enough get the View columns from thesyscolumns table. The problem is that I haven't figured out how tolink a source column name to a view column name. Any help would beappreciated.Garyselectv_obj.name as ViewName,t_obj.name as SourceTable,t_col.name as SourceColumnfromsysobjects t_obj,sysobjects v_obj,sysdepends dep,syscolumns t_colwherev_obj.xtype = 'V'and dep.id = v_obj.idand dep.depid = t_obj.idand t_obj.id = t_col.idand dep.depnumber = t_col.colidorder byv_obj.name,t_obj.name,t_col.name

View 2 Replies View Related

SUM Of One Column To Multiple Columns Based On Another Column Value

Oct 14, 2015

LeaveEntitlementID PeriodID LeaveType EmployeeID NumberOfDays

1 1 Annual 1 10
2 1 Annual 1 10
3 1 Sick 2 10
4 2 Sick 2 10
5 2 Sick 2 10

I have the above table (LeaveEntitlement) which has the above columns.

What I want to sum the column NumberOfDays based on EmployeeID, LeaveType and PeriodID columns as of LeaveTypeNumberOfDays.

For example sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Annual

The result should be shown in new column name AnnualLeave (20)

sum(NumberOfDays) where PeriodID=1 and EmployeeID=1 and LeaveType=Sick

The result should be shown in new column name SickLeave (10)

Same all leave Types

The table should be shown as the below after executing the query

LeaveEntitlementID PeriodID EmployeeID AnnualLeave SickLeave

1 1 1 20 0
2 1 2 0 10
3 2 2 0 20

is it possible in sql server

View 8 Replies View Related

How Can I Create A New Table With Its Column Named From Another Table's One Column Value By Using A Select Sentence?

Sep 27, 2006

For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".

can you tell me how can I complete this with the SQL?

View 2 Replies View Related

[*-)]how To Delete All Columns Except One Column For The Corresponding Column Name......?

Jul 15, 2007

hi friends,          i've a table with (columns) username, content,data,........... i need to delete all column names(i.e.,content,data,........) except username for the specified username. eg: consider username=mahendran. i've to delete the values in the content,data,...............for the username=mahendran. but username should exist.how to do that?pls help me...... 

View 3 Replies View Related

Mapping A Table (10 Columns) To A Table (100 Columns)

Apr 4, 2008

I'm in the process of converting legacy DTS packages to SSIS. I need to populate a table that has more fields than the source file. In DTS I did this with an ActiveX script. How do I go about doing this within SSIS.

In the ActiveX script most of the fields were defaulted with either spaces or zeroes.

One of the Destination fields needs to be incremented by 1 for each new record inserted.

Any help would be appreciated.

Thanks,

Jeff

View 6 Replies View Related

A Table/column To Table/column Data Check (was Help Please, SQL Something Simple)

Sep 15, 2006

Hi all, I am not over familiar with SQL, I am a VB programmer, simply I need to achieve the following within Enterprise Manager.

I have 2 tables, different designs, different number of rows, I simply need to check whether the contents of a column in the first table is in a column in the second table, just simply a table/column to table/column data check for the same data content.

Easy Peasy for you guys, any help would be appreciated.

View 6 Replies View Related

How To Create Key Time Column And Key Column For A Case Table And A Nested Table For Time Series Algorithm?

Jun 18, 2007

Hi, all experts here,



Thanks for your kind attention.



I want to use time series algorithm to mine data from my case table and nested table. Case table is Date table, while nested table is the fact table. E.g, I want to predict the monthly sales amount for different region (I have region table related to the fact table), how can I achieve this?

Thanks a lot and I hope it is clear for your help and I am looking forward to hearing from you shortly.

With best regards,

Yours sincerely,



View 6 Replies View Related

Questions On Key Column In Case Table And Key Time Column In Nested Table Using Time Series Algorithm

Jun 4, 2007

Hi, all experts here,



Thank you very much for your kind attention.



I am confused on key column of case table and key time column of nested table by using Time Series algorithm.

In my case, the case table structure is as below:

Territory key text (the ID is actually dimrisk_key, in this case, I use the name column binding to combine the Territory column of case table Dimrisks),

While the nested table structure is as below:

Cal_month key time (in this case, actually the ID is dimdate_key, again, I used name column bining property to bind the Cal_month to the ID)

So my question is, as the key column of case table has been set to be Territory, as a result, does the model training still cover all the cases (rows) based on the ID of the table?

Also, in the nested table, as the key time column has been set to Cal_month rather than Dimdate_key of the nested table, as a result, would the single series based on the cal_month?



Hope it is clear for your advices and help.

And I am looking forward to hearing from you shortly.



With best regards,



Yours sincerely,





View 1 Replies View Related

Add New Column In Between Other Columns (was Is It Possible)

Sep 20, 2005

Hi all

can we add a new column in a table inbetween other columns.

Sachin

View 5 Replies View Related

Instead Of Three Columns I Get Only One Column

Oct 25, 2007


I have a problem with my coding. Here is my code.





Code Block
WITH AwaitingApprovalCTE AS
(
SELECT type = 'Members Awaiting Approval Yesterday'
, borrowers = (select count(*)
from LoanApplication
where SubmittedOn >= GETDATE()-1)
, depositors = (select count(*)
from CDOrder
where SubmittedOn >= GETDATE()-1)
, MemberStatus = CuStatus
from Member
where Custatus = 'Pending'

),

AcceptedCTE AS
(
SELECT type = 'Members Accepted Yesterday'
, borrowers = (select count(*)
from LoanApplication
where SubmittedOn >= GETDATE()-1)
,depositors = (select count(*)
from CDOrder
where SubmittedOn >= GETDATE()-1)
, MemberStatus = CuStatus
from Member
where Custatus = 'Accepted'
),
RejectedCTE AS
(
SELECT type = 'Members Rejected Yesterday'
, borrowers = (select count(*)
from LoanApplication
where SubmittedOn >= GETDATE()-1)
, depositors = (select count(*)
from CDOrder
where SubmittedOn >= GETDATE()-1)
, MemberStatus = CuStatus
from Member
where Custatus = 'Denied'
),

combinedCTE AS
(
SELECT * FROM AwaitingApprovalCTE
UNION ALL
SELECT * FROM AcceptedCTE
UNION ALL
SELECT * FROM RejectedCTE

)
SELECT type,
NoOfMembersJoined = borrowers + depositors
FROM combinedCTE




Problem is I get only one field. I get only the first one.i.e. "Members Awaiting Apporval Yesterday"
I dont get other two types.."Members Accepted Yesterday" and "Members Rejected Yesterday".
Final report should look like this:

Type NoOfMembersJoined

Members Awaiting Approval yesterday 69
Members Accepted Yesterday 15
Members Rejected Yesterday 31

But I get only the "Members Awaiting Approval yesterday" for all the rows.

Type NoOfMembersJoined

Members Awaiting Approval yesterday 0
Members Awaiting Approval yesterday 0
Members Awaiting Approval yesterday 0
Members Awaiting Approval yesterday 0
Members Awaiting Approval yesterday 0

NoOfMembersJoined = 0 is ok because there may not be any data yet.

I can not figure it out why it is. Pease can anyone tell me where I went wrong?

View 10 Replies View Related

Combine Two Different Columns Into One Column

May 30, 2008

Hi Guys,
 
I have twotables(Employee and Borrower). In Employee table have EMPID and Borrower table have BorrowerID. I want to comebine these two columns into one column as EMPID  in Employee table. Can  any one help?
Thanks

View 6 Replies View Related

Searching All Columns Without Using Column Name

Dec 30, 2003

Hi,
I am developing a search engine for my application and I need to grab the entire row from the table if I found the search field in any of the columns and the search is not defined to one table. Please let me know how to search all columns in table without using column names indivdually.

View 4 Replies View Related

Inserting Several Columns Into One Column

Mar 15, 2000

I would like to insert several columns into one column.
eg. Coloumn1, Column2 & Coloum3 insert into Column00

thanks, Vic

View 1 Replies View Related

Returning 2 Columns As 1 Column

Oct 30, 2006

In this query

SELECT E1.id, E2.id
FROM productHeadings AS B1, productHeadings AS E1,
productHeadings AS E2
WHERE B1.id = E1.parent_id
AND E1.id = E2.parent_id
and B1.id = 1

the result is 2 id columns... is there a way to return all id in 1 column?!

View 3 Replies View Related

Select Max Int Column And Other Columns

Feb 27, 2015

I have three records, with one column that is an identity/PK. I want the last record inserted and the whole record's information from the query, using a where clause to limit the record returned from the table.

I get an error if I do not have the group by added. However, with this query, I still get three records returned.

SELECT max([tablePK])
,[orderGUID]
,[tblPeopleFK]
,[tbl_shippingAddressFK]
,[tblBillingMethodFK]
,[shippingMethod]

[Code] ....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved