Add Connction Fails In VS.NET With SQL Server Everywhere

Aug 17, 2006

When I try to use the "Data Source Configuration Wizard" (Menu: DataAdd New Data Source...) and I try to add a new Connection to the "Northwind.sdf" database using Microsoft SQL Server Mobile Edition it fails with

"Unable to find the requested .Net Framework Data Provider. It may not be installed."

What's really strange about this is that if I click the Test Connection" button it states "Test Connection Succeeded."

I've looked everywhere and I see that other have had the same problem but no one seem to know the solution.

jc3

View 10 Replies


ADVERTISEMENT

Setting DTS Connction Object Dynamically

May 12, 2006

Hi:

I have posted concerning this-I don't mean to double post but I have
isolated the problem and have new information. (and I'm desperate!!) Please direct me to a DTS forum if this is not the place for this, I didn't see one.

I am trying set the data connection object (ODBC to Sybase) twice in
the same package but the Data Pump Tasks that use this connection don't
seem to be using the new setting in the connection after the second
time it is set, although at the end of the package I can see that the
connection has been set. The pumps just use the original connection a
second time instead of using the 2nd connection.

Here is the progress:
1. SQL Task1: Gets server information from a SQL Server table, and sets
it to a recordset global variable in the DTS.
2. ActiveX Task1: Begins loop, and sets the connection to server2 and
sets sql of datapump tasks
3. Several data pumps run.
4. ActiveX Task2: just loops around to ActiveX Task1
5. ActiveX Task1: Sets the connection object to server2 (msgbox tells
me this happens successfully)
6. The datapumps continue to use server2(??)
7. Package finishes succesfully
8. I right click on first datapump and do a "execute task". It executes
using server2, which for some reason it did not do during execution of
the entire package.

The loops works fine (as I have gotten it from you Allan), it clearly
goes through twice when I have specified two servers (I can see the
data in the resulting table is doubled from the source server, and I
can see it in the progress window going through the data pump steps
twice). After, if I run the data pump tasks by right clicking and doing
an "execute task" then it works using server2 was set.

I put a msgbox in the ActiveX Task1 to confirm the server is being set
correctly.

Any ideas here? Is there some other property I need to set? Is it a
setting with the Data Pump task? This all seems very weird-I feel like
I must be missing something obvious.

Here is the part of the code of ActiveX Task 1 (only part) that sets
the connection (let me know if you want to see the package):

Dim pkg
Dim SCCScon
Dim objRS
Dim SQLStatement

set pkg = DTSGlobalVariables.Parent
set SCCScon = pkg.Connections("Connection_Name")

set stpEnterLoop = pkg.Steps("DTSStep_DTSDataPumpTask_1")
set stpFinished = pkg.Steps("DTSStep_DTSActiveScriptTask_5")

Set objRS = DTSGlobalVariables("gvDataSources").Value

stpFinished.DisableStep = true
stpEnterLoop.DisableStep = false
stpEnterLoop.ExecutionStatus = DTSStepExecStat_Waiting

msgbox "DSN is now: " & SCCScon.DataSource

SCCScon.DataSource = objRS.Fields(1)
SCCScon.UserID = objRS.Fields(2)
SCCScon.Password = objRS.Fields(3)

msgbox "Now I've set the DSN and it is now: " & SCCScon.DataSource

_____________________________________________
Thanks as always,
Kayda

View 1 Replies View Related

Package Fails When I Use ODBC Connection (Fails On SQL Server Agent, OK In Visual Studio)

Jun 11, 2007

I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.

Configuration:

SQL Server Agent on a 32Bit server.

The ODBC connection configuration in available on System DSN on this server.

The user of Server Agent have full access (Admin).

Connect Manager Provider: ".Net ProvidersOdbc Data Provider"

SQL Server version: 9.0.3042



Error Message:

Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.


I created a .bat file with this instruction and It's run well:

dtexec /f "C:Program FilesMicrosoft SQL Server90DTSPackagesIntegration Services Project estcom.dtsx"
pause

Why it's not running with SQL Server Agent???

View 7 Replies View Related

SQL Server Admin 2014 :: Database Mail Fails At Email Server Alert

Apr 23, 2015

We recently had a problem with DB Mail. SQL jobs that sends an email succeeded but the email in the job fail to sent. There was a problem with the email server. The error is included. We fixed the problem with the email server. How can I get an alert when a DB Mail email fails send?

Date4/23/2015 10:01:06 AM
LogDatabase Mail (Database Mail Log)

Log ID5907
Process ID13204
Mail Item ID5702
Last Modified4/23/2015 10:01:06 AM
Last Modified Bysa

Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-04-23T10:01:06). Exception Message: Cannot send mails to mail server. (Insufficient system storage. The server response was: 4.3.1 Unable to accept message because the server is out of disk space.).
)

View 2 Replies View Related

SQL Server 2008 :: SSIS Package Fails Silently On Server But Works If Run Manually

Jul 7, 2015

I have two calls to stored procedures that in an SSIS package fails silently. They are simply not executed in production but works fine in test, nothing happens and the sql server agent reports that everything has gone just fine.

In test they have 1 server with db A and B. No issue here.

In prod they have 2 servers with db A and B. On server 1 sql server agent executes a job that includes an SSIS package that on server 2 runs a couple of sp's. That user is db owner on server 2 db B and yet nothing happens. The sp's are not executed.

If I in prod run the job manually then it works, but not when run with the sql server agent account that as said is even db owner.

View 2 Replies View Related

How To Setup A Backup Server For SQL Server2005 For Production (in Case The Primary Server Fails)

Aug 1, 2007

I currently have a SQL Server cluster setup with a Primary DB Server SERVER1 and the Standby server SERVER2. SERVER1 has been failing more than normal is the past few weeks and its takes upto 5 mins for SERVER2 realize that SERVER1 is down. I am looking for a better way to implement a backup server on production with minimum downtime. Please adivse..

View 1 Replies View Related

SQL Server 2005 Express Adv. SP2 Setup Fails To Install SQL Server Database Serices Only.

Mar 26, 2007

I run setup using GUI. It upgrades all components of the existing installation w/out any problems except the last component. That is, it proceeds with the installation of SQL Server Database Serices and at the end fails to shut down the SQL Server and aborts the installation reporting the following:

"Service 'Computer_NameSQLEXPRESS' could not be stopped. Verify that you have sufficient privileges to stop system services. The error code is (16386)".

I am running Windows XP SP2 with both .NET 2.0 and .NET 3.0 installed on it. I am logged in as a system administrator.

The most puzzling to me things are:

- the setup starts AND STOPS w/out any problems SQL Server Reporting Services and SQL Server VSS Writer (thus finding enough privileges for both).

- the setup starts the SQL Server w/out any problems (thus it finds enough privileges to START A SYSTEM SERVICE) and then fails as described above 'lucking privileges".

During installation before failing the setup displays following:

"Run as Normal User. RANU instance Shutdwon in progress: MSSQL$SQLEXPRESS". The "normal user" puzzles me too, unless the SQL Server itself is meant here.

Any suggestions would be appreciated. I can provide the installation log file as well.

Thanks.

View 5 Replies View Related

Backup Fails In Windows Server 2003 For Small Business Server

Apr 23, 2008

Hi

MS Backup in Microsoft windows server 2003 for small business server reports:

<-- Volume shadow copy creation: Attempt 1.
"MSDEWriter" has reported an error 0x800423f4. This is part of System State. The backup cannot continue.

Error returned while creating the volume shadow copy:800423f4
Aborting Backup. -->


The VSS events that I get are 8193 & 6013
The MSSQL$SHAREPOINT events are 17055, 18452 & 18456


These are the main Errors that I get:

Event Type: Error
Event Source: VSS
Event Category: None
Event ID: 8193

Description:
Volume Shadow Copy Service error: Unexpected error calling routine IClientVirtualDevice::GetCommand. hr = 0x80770004.


Event Type: Error
Event Source: MSSQL$SHAREPOINT
Event Category: (2)
Event ID: 17055
User: NT AUTHORITYSYSTEM
Description:
18210 :
BackupVirtualDeviceFile:repareToFreeze: failure on backup device '{74A09E78-8845-47EB-9602-705E4406096C}1'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).



Event Type: Error
Event Source: VSS
Event Category: None
Event ID: 6013
User: N/A
Description:
Sqllib error: OLEDB Error encountered calling ICommandText::Execute. hr = 0x80040e14. SQLSTATE: 42000, Native Error: 3013
Error state: 1, Severity: 16
Source: Microsoft OLE DB Provider for SQL Server
Error message: BACKUP DATABASE is terminating abnormally.



Event Type: Error
Event Source: MSSQL$SHAREPOINT
Event Category: (2)
Event ID: 17055
User: NT AUTHORITYSYSTEM
Description:
18210 :
BackupVirtualDeviceFile:repareToFreeze: failure on backup device '{74A09E78-8845-47EB-9602-705E4406096C}5'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).


I need to get the Backup System working again urgently.
Any advice will be greatly appreciated

View 8 Replies View Related

SQL Server Express Edition Fails To Install On Windows Server 2003, R2, SP2

Mar 21, 2008

I cant figure out why this is happening.. its a fresh 2003 x64 R2 sp2
server, during the installation of the SQL Server Database Services the server hangs
and displays Setting File Security. I let the install run for over 45 mins and it still hangs... the log file is useless..
i cant find any clues as to why ...


any thoughts..

View 2 Replies View Related

Smalldatetime Comparison Between Local Server And Linked Server Fails?

Mar 8, 2006

Hi all,

I have the following select that is designed to compare values on parallel servers.SELECT TA1.EPS, TA1.Sales, TA1.Income, TA1.EarningsReportDate,TA2.EPS, TA2.Sales, TA2.Income, TA2.EarningsReportDate
FROM TradeAnalysis.dbo.SalesIncome_Quarterly AS TA1
FULL OUTER JOIN L_TA_MIRROR.TradeAnalysis.dbo.SalesIncome_Quarterl y AS TA2
ON ((TA1.OSID = TA2.OSID) AND (TA1.QtrYear = TA2.QtrYear) AND (TA1.QuarterNo = TA2.QuarterNo))
WHERE(BINARY_CHECKSUM(TA1.EPS, TA1.Sales, TA1.Income, TA1.EarningsReportDate) <>
BINARY_CHECKSUM(TA2.EPS, TA2.Sales, TA2.Income, TA2.EarningsReportDate))Disregard the full outer join, it is necessary in the full select, I have just pared it down to show here and for testing. A standard join will also have the same result.

The trouble is that the comparison (the BINARY_CHECKSUM) is failing on the EarningsReportDate column, which is defined on BOTH servers in DUPLICATE databases as a smalldatetime.

The data is actually the same in both rows of each table (as is all the other data being compared). What I am seeing is that the select returns milliseconds on the LINKED server (the L_TA_MIRROR reference), but not on the local database?

for example,
Local server data returned in above select is 2000-01-28 00:00:00
Linked server data returned in above select is 2000-01-28 00:00:00.000

Wassup with THAT? If I remove the date from the select/comparison, it says everything matches, so I am pretty sure this is the culprit that is causing the BINARY_CHECKSUM comparison to fail.

Is there some setting that I need to put on the Linked Server reference that says "treat this as the smalldatetime data type it IS, dammit!"????

I can get by the issue if I replace the date reference in the linked server part of the select with CAST(TA2.EarningsReportDate AS smalldatetime) but why do I have to do this?

Yes, I am SURE both servers have the column in question defined as a smalldatetime, as running the same select on either server causes the same failure, but only when referencing the LINKED server column.

View 1 Replies View Related

FTP Server Fails

Apr 23, 2001

I trying to FTP Files about 37 files each 3 GB. The FTP is just stuck. It fails half way through. I use IIS 4.0 in Clustered Network and MSSQL 7.0. IIS 4.0 does not support transfer of files more than 4 GB.Is there any other tools that I can use to FTP the dump files. Does anyone have any ideas.

View 1 Replies View Related

SQL Server - Login Fails

Aug 14, 2006

Hi,
I work with a newbie asp.net/ sql server programer (I didn't know that when I first worked
with him) in developing a website with CMS, he finished the work and he showed me that every
thing in the local host (on the pc) work just fine, when we tried to upload the files to the
server using ftp, we got this error:http://www.radiorient.net/index.aspx
This is his first project to be online, so I'm not sure (so is he) what should be done to
solve this issue, I'm trying to do my part to try to solve this problem as I'm on strict
deadline.
He told me that the connection in the code is:
"public void get_con(){con.ConnectionString="Server=local;database=Radiorient_db;User
ID=gyonis_radiorient;Password=xxx";if(con.State==ConnectionState.Closed) con.Open();}"
Host Name: mssql.royaltyservers.com (64.15.146.79)Database name: gyonis_Radiorient_dbDatabase Login: gyonis_radiorientDatabase Password: xxx
Control panel: H-SPHERE
ASP.net/ sql server
Can any body please help me ASAP... Thanx

View 9 Replies View Related

Connection To Sql Server Fails

Sep 17, 2005

Hi

I have a SQL Server that uses mixed mode , I have given it a real IP ....from home when i connect on the dial up & use the EM & then try registering it using the real ip & the sa username & pasword .It says that Access denmied to the SQL Server..... or the server does not exists


There is no firewall ... I am directly connected to the Internet & so is the SQL Box

Can anyone please let me the reason for it & how to solve this problem


Thanks

View 3 Replies View Related

SQL Server 2005 SP2 Fails

Feb 26, 2007

I have a Windows Server 2003 Enterprise Edition SP1 with a couple of SQL Server 2000 instances on it and two SQL Server 2005 instances on it. 

I tried to install SQL Server 2005 SP1, but kept getting failures.  I saw that SP2 fixed some of the issues with installation issues that SP1 had.  So, I tried to install it.  Some of the smaller components install successfully (VSS Writer, Backward Compatibility, SQLXML4, MSXML 6.0 Parser, Native Client, Support Files), but all of the base services fail to install (Database services, Reporting Services failed for two different instances). 

I've downloaded the SP2 from the Microsoft site local to that server and install from there.  I don't have space problems on the drives in question.

In the summary log that's located at C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix, I see:

Error Number              : 29513
Error Description         : MSP Error: 29513  SQL Server Setup Failed to compile the Managed Object Format (MOF) file C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof. To proceed, see "Troubleshooting an Installation of SQL Server 2005" or "How to: View SQL Server 2005 Setup Log Files" in SQL Server 2005 Setup Help documentation.

I've searched through many links, one suggested that the WMI could be potentially corrupt.  So, I also downloaded with WMIDiag utility and ran it.  So, I have a log from that as well.  It did have 8 errors in it.  But, the information in the report hasn't really helped me determine how to fix those errors. 

While I was looking around, I found another log file located at C:WINNTsystem32wbemLogs called the mofcomp.log.  As my error looks like a compile error issue, I looked in that log file and found the following at the times when the install was failing:

(Thu Feb 22 16:29:49 2007.1910312) : Parsing MOF file: C:Program FilesMicrosoft SQL Server90Sharedsqlmgmprovider.mof
(Thu Feb 22 16:29:49 2007.1910625) : Finished compiling file:C:Program FilesMicrosoft SQL Server90Sharedsqlmgmprovider.mof
(Thu Feb 22 16:34:25 2007.2186343) : Parsing MOF file: C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof
(Thu Feb 22 16:34:25 2007.2186343) :  (1): error SYNTAX 0X8004401e: This is not a valid MOF file

This makes me wonder if there is an invalid MOF file as part of SP2?

Also, when I go into Microsoft SQL Server Management Studio, I can no longer look at any of my maintenance plans.  All of them throw an error which says: 

Error loading 'Daily Backup' : Unable to cast COM object of type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass' to interface type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSApplication90'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{7591CC39-276A-4973-97C7-4EFEA5A5788F}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE))..

Any help would be appreciated.

Thanks,

Paul

 

 

View 7 Replies View Related

Connect To Server Fails

Mar 28, 2008

Hi all,

I have just installed Microsoft SQL server 2005.
From Management Studio I try to connect to server using as Server Name:computerNameSQLEXPRESS.

Unfortunately I am not able to connect, instead of this I receive an error message:

Cannot connect to MARIAPORTSQLEXPRESS

Additional Information:

An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (providerQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server)




Please help me!!


Thanks in advance,
Maria

View 3 Replies View Related

SQL Server Error When Dts Fails

Sep 19, 2007

Does anyone have any insight to this error:
"Duplicate column name resolution could not be done because the ordinal specified a column of a different name"

I googled it and got one result with no resolution.
I get this error from SQL Server when a task in my dts package fails. My dts package is attempting to update records whose fields have changed based on a specified criteria.

The specific task that fails is a transform data task and contains the following sql query:
select *
from tableNew new, tableOld old
where new.col1 = old.col1 and new.col2 <> old.col2 and old.col3 = new.col3

I then have a transformation to update col1, col2, col3.

Any help would be greatly appreciated.

TIA,
Jennifer

View 3 Replies View Related

SQL Server Setup Fails

Dec 4, 2006

Dear,

When i installing SQL Server in my server then i recieve this massege can any one help me regarding :

TITLE: Microsoft SQL Server 2005 Setup
------------------------------

SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files".

For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=29515&EvtType=lib%5codbc_connection.cpp%40Do_sqlScript%40OdbcConnection%3a%3aconnect%40connect%40xea75

------------------------------
BUTTONS:

&Retry
Cancel
------------------------------

View 4 Replies View Related

VB6 ADO Connection To SQL Server 2K5 Fails

Dec 21, 2006

I have a legacy visual basic application that connects to a newly installed SQL Server 2005. On occasion (about once or twice a day) I will receive several errors in a row about not being able to open a connection to the database.

Since I am catching any errors generated I post the number and description of the Err object to the screen in a message box for notice to the user. The error is 0 and the description is blank. There are no corresponding events in Window Event Log or in the SQL Server Logs other than standard informational messages about the regular operation of the server.

I am connecting to a SQL Server 2k5 Workgroup Edition, with ODBC, using named pipes. The connection works at all other times, so I know I am set up correctly. The program loops thru the same processing section of code so there is no chance special operations being done on the database could hose the connection.

Thanks for any help.

View 1 Replies View Related

SQL Server 2005 Server Installation Fails

Oct 8, 2007

Downloaded and installed Visual Studio 2008 Express Editions Beta 2 applications in order:


Visual Basic 2005 Express Edition

Visual C# Express Edition

Visual C++ Express Edition

SQL Server 2005 Express Edition (Advanced)
All went well untill the SQL Server installation. Get an error message stating:


"An installation package for the product Microsoft SQL Server Native Client cannot be found. Try the installation again using a valid copy of the installation package 'sqlncli.msi'."

The "Setup Progress" dialog box displays a "Setup failed." error beside "SQL Native Client" and "SQL Server Database Services" and then closes generating the "Send Error Report" dialog box. A log file is generated but can't find anything meaningful regarding the problem.

HELP!

View 1 Replies View Related

Connection To Remote Server Fails, But Not To LAN-Server

Nov 16, 2006

Hallo,

I have the following problem:
I can't connect with the Management Studio Express to my remote server, which is located in the internet. All firewalls are shutdowned and I can connect to the server via telnet and get an error in the event log on the server when I type some random characters.

The connection to another remote server in my LAN does not fail. Only TCP/IP and shared memory is activated.

Servername: mydomain.deSQLEXPRESS or 217.X.X.XSQLEXPRESS
Username: sa
Password: [password]

I get the following error message:

'Es kann keine Verbindung zum Server hergestellt werden.

Additional information:
Fehler beim Herstellen einer Verbindung mit dem Server. [...] error: 26'

Translation:

'No connection could be established.

Additional information:
Error during connection establishment to the server. The reason for the problem could be, that no remote connections are allowed in the default configuration. Error 26'

Do you need more information or do you have any idea about the reason causing the problems? A local connection via remote desktop and the management studio works perfectly.

Greetings and thanks
Martin Brenn

View 3 Replies View Related

Remote Sql Server Login Fails

Aug 4, 2004

Hello,

I'm about googled out on this one. I did find one post that looked almost like mine but the thread was never finished. I'm sure this problem has been solved and I'm just having trouble finding it. Can someone help me?

I'm running sql server 2000 on a small workgroup network of winxp machines.

If sql server machine is the same as webserver machine, my asp.net app works. If sql server and webserver are different, the app fails because of sql server login failure.

I am able to explore the database remotely through server explorer in VStudio2003. However, when I try to access the database with the asp.net application, the login fails. I have tried several connection strings. Authentication on the server is 'mixed', the server runs in the system account, and the password for sa is "" (blank password).

I've tried (for instance)
Application["DBConnectString"] = "server=machinename;uid=sa;pwd=;database=Resume";
and
Application["DBConnectString"] = "server=machinename;integrated security=true;database=Resume";

When "machinename" is the same as the machine on which the app is running. both of those connection strings work, and the application runs correctly.

When "machinename" is different (that is, sql server on a different machine from the webserver), depending on the connection string I get either
"Login failed for user 'sa'."
or
"Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection."


Obviously VStudio is using some mechanism to add the remote server to it's list of servers and then to allow me manually to explore the databases on that server. Why am I too stoopid to figure it out?

TIA,
Tim

View 7 Replies View Related

Installing SQL Server 2005 Fails

Nov 25, 2005

I have been trying to install Visual Web Developer 2005 Express Edition and SQL Server 2005. The Web Developer installs ok but the SQL Server installation fails. I can't figure out why. I have (I think...) uninstalled my previous beta intallations. The must be something else that prevents the installation. Can anyone point me to some FAQ or something that can give me some ideas on how to handle the installation./anders

View 2 Replies View Related

Login To Remote SQL Server Fails

May 30, 2000

I am trying to use a confirmed and valid account over a WAN (US to Europe)
to register and access a SQL server database. The protocol being used is
TCP/IP and it has been confirmed that port 1433 is open.

The data is going through a frame relay line and pining the remote
SQL Server does return a valid response. Unfortunately, I am getting the
following error:

Error 18456
Severity Level 14
Message Text
Login failed for user 'TestUser'.

Explanation
You do not have permission to log in to the server.

Action
Contact a member of the sysadmin fixed server role to request login permission.

View 4 Replies View Related

Login To Remote SQL Server Fails --- #2

May 30, 2000

I am using TCP/IP net library as far as I know. Just in case though, how
can I ensure that TCP/IP is being used? both on the local and
remote servers?

Thanks for your help
Ziggy

View 1 Replies View Related

Delete Fails Through Link Server

Feb 25, 2002

Hi Folks,

I'm try'n to delete a record through a link server to a SQL2000 box and is getting this error:


Server: Msg 7306, Level 16, State 2, Line 1
Could not open table '"XXX"."dbo"."XXXX"' from OLE DB provider 'SQLOLEDB'. The provider could not support a row lookup position. The provider indicates that conflicts occurred with other properties or requirements.
[OLE/DB provider returned message: Errors occurred]


Anyone seen this?

View 1 Replies View Related

BDE Connection Via ODBC To MS SQL Server Fails

May 4, 2006

Hi,

I have a strange problem accessing a MS SQL Database from my network.
I'm using an application that is based on BDE which uses ODBC to connect to a MS SQL DB.
When I tried to connect from the network with BDE,I got this error message:

BDE Error : 13059
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen (Connect()).


On the server side I'm using W2003 EE ,MS SQL 2000 Standard with SP4, BDE5.11.
On the client side it's an XP SP2 with MS SQL Client installed, same BDE 5.11
When I create an alias using ODBC and mapping to my server, it connects and the communication with the Database Server succeds:
TESTS COMPLETED SUCCESSFULLY!
When I'm trying to connect using BDE Admin and double clicking on the + sign of the alias I created usind ODBC admin I get the message I listed above.
Any help would be appreciated,

Thanks.

View 4 Replies View Related

DBC Connections To SQL Server 2000 Fails

Jun 9, 2006

HELP!!!!! HELP!!!!!
SQL Server ODBC connections to virtual server that has SQL Server 2k comes back with a 'Specified SQL Server does not exist'. Can telnet to the server, can ping it as well. THe node is up and running, another virtual instance running from the same node is fine.

What could be the issue here?????

View 3 Replies View Related

Mailing DBA When Sql Server Agent Fails

Sep 6, 2006

Hello

I would like to know a script which mails the DBA mail box when the sql server agent fails ( I am working on sql server 2000) using SMTP. I have got SMTP server configured for all my other job failure notifications.

Please let me know any scripts that can be run on the command prompt or any ideas of how I can do it.



Thanks

View 6 Replies View Related

Job Fails To Communicate With SQL Server Agent

Sep 13, 2006

Hi,

Just need some help on a job issue.

The job in question gives the below mentioned error when run

Error 22022: Unable to post notification to SQL
ServerAgent (reason: OpenFileMapping()returned error
2, 'The system cannot find the file specified')

This seems to have started after I changed the owner for the Agent and MSSQL service from local service to a domain ID.

FYI, I have also changed the job owner from sa to the domain ID and have tried restarting the agent service in the hope that the Job can speak to the agent .. but it doesnt :(

Microsoft suggests to change some registry entries but I am not sure if that'd work
http://support.microsoft.com/default.aspx?scid=kb;en-us;911841&sd=rss&spid=2852

The server on which this job is hosted is a production box .. so am a litle apprehensive about making any registry changes

Any Suggestions ?

Thanks.

Warm Regards,
Ranjit.

View 2 Replies View Related

Pls Help: Can't Connect To Server - Login Fails

Jul 20, 2005

I get the following error when trying to create an Access Data Project:Login failed for user 'myname'. Reason: Not associated with a trustedSQL Server connection.I'm using a specific username and password. The sQL Server (actually, MSDE)is installed on \server1, and I'm working on my laptop.I get the error whenI try and click the dropdown for "Select the database on the server". Anyhints on what I've donw wrong?Thanks, in advance.

View 1 Replies View Related

Installing SQL Server 2005 SP1 Fails

Oct 26, 2006

Hi,
Trying to install SQL Server 2005 SP1 on a windows 2003 box and it fails for database services and reporting services patch. It installs successfully other components of the patch.

Following errors are logged in the event log.

1) Product: Microsoft SQL Server 2005 - Update 'Service Pack 1 for SQL Server Database Services 2005 ENU (KB913090)' could not be installed. Error code 1603. Additional information is available in the log file C:WINNTHotfixSQL9LogsSQL9_Hotfix_KB913090_sqlrun_sql.msp.log
2) Product: Microsoft SQL Server 2005 -- Error 29506. SQL Server Setup failed to modify security permissions on file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData for user birendraa. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that exists on the destination drive.

3) Product: Microsoft SQL Server 2005 Reporting Services -- Error 29561. SQL Server Setup failed to retrieve the SSL Certificate Name.

4) Product: Microsoft SQL Server 2005 Reporting Services - Update 'Service Pack 1 for SQL Server Reporting Services 2005 ENU (KB913090)' could not be installed. Error code 1603. Additional information is available in the log file C:WINNTHotfixRS9LogsRS9_Hotfix_KB913090_sqlrun_rs.msp.log.

The account running SQL server setup has admin privileges on that box.

Kindly help me in this regard.

Thanks.
Birendra

View 1 Replies View Related

SQL Server 2005 Installation Fails

Nov 23, 2006

I am running Windows XP SP2. The installation fails with

SQL Server coul not connect to the database service for server configuration.

[SQL Native Client]Unable to complete login process due to delay in opening server conection.



Please help in getting this working, I have not been able to find anything by googling thus far.

Regards

Harald Hedlund

View 1 Replies View Related

Package Fails When Run Under SQL Server Agent

Jul 5, 2006

Hi,

I have a SSIS package that I developed using Business Intelligence Development Studio. I imported it into our SQL Server database and it runs fine (when I connect to Integration Services within SQL Server Management Studio, and run the package). But when I created a SQL Server Agent job comprising 1 step, to run this package, it fails. The failing step attempts to read data from a MS Access 2000 DB into SQL Server 2005.

I added logging to the package, and got the following error logged to the Event Viewer:
"The AcquireConnection method call to the connection manager "CurrentYearPCStats" failed with error code 0xC0202009."

I then created a new Operating System (CmdExec) step, calling DTEXEC with the command line copied from that generated by the SSIS step. The command line is:
"C:Program FilesMicrosoft SQL Server90DTSBinnDTEXEC.EXE" /SQL "AFAReductionAFA Reduction Integration" /SERVER <ourservername> /MAXCONCURRENT " -1 " /CHECKPOINTING OFF

This failed with the same error in the Event Viewer, but for some reason also produced a meaningful error in the SQL Server Agent job's View History:
Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "The Microsoft Jet database engine cannot open the file '\<anotherservername>PCStatsliveCurrData.mdb'. It is already opened exclusively by another user, or you need permission to view its data."

Please note that the SQL Server Agent runs using user id sqlservice, by default, and I have amended this user's Windows account to make it a Domain Admin.

Please let me know why I might get this error, when the package runs OK on its own.

Many thanks,
Keith.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved