Adding Measures To Report - Receive Error
Jun 19, 2007
Hello,
My report, which has a matrix and a chart work fine. Then...
I click on the Data tab, drag a measure into the results grid. At this point I haven't added the new measure to the matrix or anything in Layout.
I click the Preview tab and get the following message: "The definition of the report XXX is invalid. More than one data set, data region, or grouing in the report has the name 'YYY'. Data set, data region and grouping names must be unique within a report.
Ok, I get the point. But why and how would adding a measure give me this issue? Where can I even find where this is being duplicated?
The message refers to a name that is a parameter, and I don't see anything in there that might cause this.
Thank you for the help.
-Gumbatman
View 1 Replies
ADVERTISEMENT
Apr 11, 2008
Hi,
For a long time I've had SQL Server 2000 with RS on a Server2003 machine.
When I want to publish a report from my Dev box, I remove anon. access on the Production machine, deploy the report, then go into report manager to tweak a couple of parameters. I then re-enable anon. access so users can continue.
Yesterday, I removed anon. access and deployed the report but when I went into Report Manager I received the above error message... "The underlying connection was closed: An unexpected error occurred on a receive."
I can get into report manager with anonymous access enabled, but I don't have authority to do anything.
What's happened!!!? More importantly, how do I fix it?
View 8 Replies
View Related
Jul 5, 2015
I have an old model that unfortunately had to be re-establish.
In order to save time, I thought that I can export all my measures and paste it as measures in my new model.
I used the following technique to export the measures from the old file: [URL] ....
How to use the output and create the identical measures in my new model, without the need to manually write each one of them?
View 7 Replies
View Related
Jun 18, 2007
Hi,
I would like to create a report on a cube with Report Server (Query Builder) with one dimension in columns and the "measures" dimension members in rows:
Jan Feb Mar ...
Measure1 10 12 14
Measure2 20 22 24
..
How to create with either Tabular or Matrix report type?
Thanks,
Marcus
View 3 Replies
View Related
Mar 28, 2007
what can cause the above error when connecting to an endpoint via a c# app? the app, and sql are both on my machine ( im just doing this for test purposes and to learn something new.)
View 1 Replies
View Related
Mar 13, 2008
First off I understand that it is a horrible idea to run extremely large/long running reports, but sometimes it ends up being the best possible solution due to external forces.
I've got a 25,000 page report that we recently converted from crystal reports to SSRS. The SSRS server is a 64bit 2003 server with 32 gigs of ram running SSRS 2005. When running the report through the report manager web application, it renders in the browser/viewer after about 12 minutes. Exporting to pdf through the browser/viewer in the report manager takes an additional 55 minutes. It does work and it produces a whopping 1.03gb pdf.
Unfortunately, I've run into a problem when trying to do this from a console application using the SSRS client API. After about 30-35 minutes I get an exception on the client with the following error:
Exception Message: The underlying connection was closed: An unexpected error occurred on a receive.
InnerException = Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
Here is the api call:
Code Snippet
byte[] m_data = reportingService.Render(this.ReportPath, this.ExportFormat, null,
deviceInfo, selectedParameters, null, null, out encoding, out m_mimeType,
out usedParameters, out warnings, out streamIds);
Here are some things I've tried so far:
set the HttpRuntime ExecutionTimeout value to 3 hours on the report server
disabled http keep alives on the report server
increased the script timeout on the report server
set the report to never time out on the server
set the report timeout to several hours on the client call
Disabled antivirus on the client side, and verified there was no antivirus running on the reporting server.
Tried using default credentials in the ReportingService object as opposed to supplying credentailsAny ideas would be appreciated. I understand the best solution is to split the report up into smaller reports, which is the backup option, but being able to keep it as one report is the goal.
View 1 Replies
View Related
Nov 13, 2007
Receive this error msg when trying to parse a SQL Query
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I have just finished going thru a long process getting SP2 CU3 patch installed.
The first file microsoft sent was corrupted and in turn corrupted my .NET Framework, had to run repair on the Framework before installing CU3.
I am now on version 9.0.3186. I have two other boxes with the same version and do not have this problem
My understanding is that all of the patches/hotfixes since SP,1 that this problem was resolved
Any help will be greatly appreciated as I am in a very heavy development stage on this box.
Thanks
Greg
View 1 Replies
View Related
Jul 23, 2005
HI,I am getting an error on my sqlserver database server. My clients aregetting kicked out of transaction, giving an error"New transaction cannot enlist in the specified transaction coordinator"When i saw the event log on the DB server i found the following message************************************Event Type: InformationEvent Source: MSDTCEvent Category: CMEvent ID: 4156Date: 6/13/2005Time: 9:30:48 AMUser: N/AComputer: XXXXXXXDescription:String message: ProcID= 0x780 QMGR::Receive Returning Out Of ResourcesError.************************************************** ***************I am using SQLServer 2000 Advanced server, on Windows 2000 Advanced server.Thanks for help.Indushekar.
View 4 Replies
View Related
Oct 5, 2007
Maybe I am missing something completely obvious but as far as I can tell I aren't!
I am trying to simply pass a parameter to a stored proc to return results. Easy? So I thought so too...
This is my stored procedure below (in it's ALTER PROCEDURE form):
ALTER PROCEDURE [dbo].[spd_Tester]
-- Add the parameters for the stored procedure here
@Check int
AS
BEGIN
SELECT * FROM tblPerson
WHERE PersonID = @Check
END
Now I know this is a SQL Server forum but I figure anyone who reads this probably does some application programming as well, so here is the code that calls this. It's in VBA using Access 2003. I figure the error is being returned from SQL Server Express so that's why I have come to this forum instead of an Access forum! I could be wrong though...
Here is the code that calls this:
Dim rs As ADODB.Recordset
Dim cmd As ADODB.Command
Set cmd = New ADODB.Command
'Run sql command
With cmd
.ActiveConnection = CurrentProject.Connection
.CommandText = "dbo.spd_Tester"
.Parameters.Append .CreateParameter("@Check", adInteger, adParamInput, , Me.txtFirstName)
'Execute, return recordset
Set rs = .Execute
End With
Now I figure this should work. However, I get the error "Procedure or function 'spd_Tester' expects parameter '@Check', which was not supplied." when I execute the procedure with the number 1 in the txtFirstName text box.
Can someone tell me what I am doing wrong?? The tblPerson table has data in it, if I run the select from a query window, specifying a value for @Check, it works just fine.
Thanks in advance!
View 4 Replies
View Related
Apr 9, 2008
Hi,
I am using the SMTP Task to send an email to about 200 individuals with their own specific attachment. If it cannot find the attachment the SMTP Task fails.
Is there a way to log the failure and have it keep going? That way it will still process everyone, but I would get a list of those who didn't receive the email because there was a problem.
I looked at Jamie Thompson's blog and he had a great script to send out emails. But if I use that, I haven't yet figured out how to pass the filename variable to it and attach the file. Even if I use that script, how do I deal with the errors?
Thank you for the help.
-Gumbatman
View 6 Replies
View Related
Jan 15, 2007
Hi
I am Creating Click Once Windows Application with Reporting Services 2005.I have created Report and Published on Report Server.In my windows application I am successfully able to view my published report through report viewer control.
Now in my application I am getting a dataset from my custom webservice. I want this dataset data to be added to my report as datasource at runtime on Client Side ,as my report is on Report Server.
waiting for help!!
Thanks in Advance
Pankaj
View 8 Replies
View Related
Feb 25, 2008
Hi all,
Now I have some problem about adding interactive with user. I want to adding dropdownlist to report by using report desinger. This dropdownlist is used for send datetime parameter to query data. It is consist "month" and "year" list.
Can report designer do it?
If reporting designer cannot add dropdownlist to report...
There are some solution for solving this solution.
Thank you very much.
View 5 Replies
View Related
Feb 14, 2007
I have a pretty complicated report (lots of subreports, tables, etc) that can be well over a few hundred pages long. I can generate the report just fine, but I cannot seem to export it to anything other than an html archive. I need to export to PDF. Every time I try to export it get an error that says:
An internal error occurred on the report server. See the error log for more details.
I don't get any more information than that. Is there a way that I can figure out what the actual error is, or any other way I can go about troubleshooting this? Thanks.
Jeff
View 3 Replies
View Related
Apr 27, 2007
I would like to know whether there is any way to add a button in report. I have 3 report parameters. On clicking the button, the current values of the reports are to be obtained and saved in database i.e saving the report configuration. I will use this saved configuration to form the url and view report directly.
Thanks,
Pradeep
View 3 Replies
View Related
Apr 22, 2008
Hi There,
I have the following query:
SELECT NATNLACCT, IDCUST, TEXTSNAM, AMT
FROM
VIEW_ARCUS
where amtbaldueh != .000
order by NATNLACCT
but i want to display the data something similar as below. How do I create the total lines after each natinlacct grouping? I don't know how to add it in the report layout. I have the columns data and grouping right but I'm just not getting how to add that total line after every group.
Natinlacct idcust textsnam amt
Doda 1234 abcd $101
Doda 5678 efgh $200
Doda 9876 ijkl $300
Doda Total $601
Nava 5847 jhgf $230
Nava 5487 lfde $130
Nava 3587 lrsd $100
Nava Total $460
Thanks
Rhonda
View 3 Replies
View Related
Jan 7, 2007
I would like to allow users to add a comment to a report. What is the best way to do this? When the report is run I would like users to be able to see all comments and which user reported them and the date and time the comment was entered
View 1 Replies
View Related
Mar 5, 2008
We have a few reports that we would like to require the user to enter a password before they can view the report. Is there a way to do this?
Thank You
Kaysie
View 4 Replies
View Related
Jul 4, 2007
I am very new to the SQL report server, but have used other reporting tools before where I could add (or import) a new table of information directly into a report itself. I would do this when I required information in the report that is not part of the datasources tables.
For example, I use it for tying into the report complex sales budget numbers that are not included anywhere in the main datasource. I would simply add the table to my query I created, create my links, and I have a sales vs budget report.
Do you know if this is possible using the SQL reporting tools, or does the table need to be part of the main datasource ?
Thank you in advance.....
Chris B.
View 2 Replies
View Related
Jan 10, 2006
I am using Visual Studio 2005 to create a report from a OLAP cube.
I am building a drop down list for user to select the desired branch. My mdx query as follow:
with
member [Measures].[ParameterCaption] AS '[Company].[Branch].Currentmember.Member_Caption'
member [Measures].[ParameterValue] AS '[Company].[Branch].Currentmember.Uniquename'
select
{[Measures].[ParameterCaption], [Measures].[ParameterValue]} on columns,
{[Company].[Branch].ALLMEMBERS} on rows
from [Profit And Loss]
I would like to add a blank row in the result set, such that I can consider that as selecting ALL Branch
Any suggestions on what should I do?
View 1 Replies
View Related
Oct 23, 2007
HI guys,
I want to add some customized text to the report programmatically before the report is rendered. As it has to be done for all the reports, I don't want to do it report by report.
For example, the report needs to display user selected filters.
Any thoughts?
Thansk.
View 4 Replies
View Related
Jan 7, 2008
Hi, I have a SRS report that I would like to a add an PDF file to be visibleprintable on the report. The data stored is the file location of the file.
I tried using an image; however it does not recognize the PDF files.
Please advise.
View 3 Replies
View Related
May 18, 2007
Hi all,
I am stuck in the following situation, I have following query:
SELECT EM1.VALUE AS 'P_ABC', EM2.VALUE AS 'P_XYZ', COUNT(EM1.VALUE) AS 'COUNTS'
FROM TABLE_1 EM1, TABLE_1 EM2
WHERE EM1.EXTENDED_PROPERTY_GID IN (SELECT GID FROM TABLE_3 WHERE NAME = 'ABC' )
AND EM2.EXTENDED_PROPERTY_GID IN (SELECT GID FROM TABLE_3 WHERE NAME = 'XYZ' )
AND EM1.DOCUMENT_METADATA_ENTRY_GID = EM2.DOCUMENT_METADATA_ENTRY_GID
group by EM1.VALUE,EM2.VALUE
There is foreign key relation between EXTENDED_PROPERTY_GID OF TABLE_1 AND GID FROM TABLE_3
Now, I want to create an ad hoc report but the problem is when I add EM1.VALUE to display the P_ABC, I am not able to add EM2.VALUE after that, may be because refere to same column of same table. I have to add EM1.VALUE and EM2.VALUE both to display result but I am not able to do it.
What is the solution for this problem ? Its kind of urgent.
Thanks,
prashant
View 1 Replies
View Related
Feb 7, 2007
Hi
I want to add Hyperlink to report, using report builder.
or to add it to report model
does any body has a clue
ruvy
View 3 Replies
View Related
Mar 12, 2007
Hi guys,
Is it possible at runtime to decide what subreports you want in your master report. Is this possible in RS?. Many Thanks in advance.
View 6 Replies
View Related
Mar 13, 2008
Is it possible to add new data to an existing report. I already updated the SQL query, but the new data does not appear within the report. How can I modify the rows, columns and data fields???
Thanks in advance!
View 5 Replies
View Related
Apr 26, 2007
My company sends reports on a daily basis to our customers. Now I want to save all the sent reports on disc with the date in the filename. I have set up a subscription which daily saves the files where I want them. However, I haven't found a way to add the date easily. I already have a parameter when creating the report, it is called Date. Does anybody know if I can use a parameter or something else?
Thank's
View 10 Replies
View Related
Mar 3, 2007
Hi,
When I launch a report using the following url, and then make changes to the report and save it, Reportbuilder is creating another report with the same name but also including the .rdl within the name itself.. therfore I now have two reports now displayed within the report manager
http://localhost/reportserver/reportbuilder/reportbuilder.application?/Report1
Can someone please help...
View 2 Replies
View Related
Sep 27, 2006
The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over. Your suggestions / comments are appreciated.
Thanks!
View 1 Replies
View Related
Nov 7, 2007
I need to add a textbox in the report which would display the total number of rows in the report.I need to do this in reports which have either tabular layout or a matrix layout .
Thanks in advance
View 1 Replies
View Related
Apr 18, 2008
I build a long report in sql reporting(5 pages)
It has many lists.
on the 3rd page it is inserting a blank page with just the report header
I check the list before and after the page
Insert Page break before and after is "unchecked" on both the list and its grouping.
Is there anything else I can verify to find a solution to print no blank pages. The client will have my head if it is there.
Nick
View 4 Replies
View Related
Aug 26, 2013
I'm trying to create an inventory report for service trucks by adding all the transactions that were used to restock the truck and subtract the transactions where the parts were used on an invoice and removed from the truck. All the transactions are in the same table. The fields that would be relevant are PartID, QTY, WhsTo and WhsFrom. If I wanted to calculated stock levels for truck 16 I would select all transactions that have a value of 16 in either WhsTo or WhsFrom. If WhsTo contained 16 then I would want to add QTY. If WhsFrom value was 16 then I would want to subtract QTY. I would want it grouped by distinct PartID. I don't know how to structure the Select statement to decide whether to add or subtract.
View 6 Replies
View Related
Sep 2, 2015
After adding cascading parameters my report which was running earlier is failing. I'm using Report builder 3.0, windows 2008r2, am running the report from the server
Error message "An error has occurred during report processing.(rsProcessingAborted)
Query execution failed for dataset 'LastName' (rsErrorExecutinGcOMMAND)
Incorrect Syntax near ','."
Is there a way where i can look up the code in xml using report builder or some other way so that i can delete the extra '','.
View 6 Replies
View Related
Mar 14, 2014
I typically use Report Designer, but I have a new project requiring Report Builder 3.0. In Report Designer (BIDS), I can take more complex expressions (ie SWITCH with 5 or 6 options), and put each pairing on a new line to be able to better read the code.
In the Expression Editor in Report Builder, pressing the ENTER key on my keyboard closes the Expression dialog box and saves the changes.
Is there any way to add line returns in the code to make it more readable? The expression editor wraps when it runs out of room, but this doesn't make it more readable, in some cases, it wraps in the middle of a field name, making it even less readable.
The 2012 version also has this same "feature".
View 5 Replies
View Related