Adding A Count Clause To A Query
Jun 5, 2008
I have the following query where I select records from Active_Activities_temp which do not match on cde_actv in the table ACTIVITY_CORE_LISTING:
SELECT Active_Activities_temp.*
FROM Active_Activities_temp LEFT JOIN
ACTIVITY_CORE_LISTING ON
Active_Activities_temp.cde_actv=ACTIVITY_CORE_LISTING.cde_actv
WHEREACTIVITY_CORE_LISTING.cde_actv is null
ORDER BY prtcpnt_id
So for example, if a participant has a cde_actv=38 (which doesn't exist in ACTIVITY_CORE_LISTING), that record would appear as the query is currently.
The issue is that participants can have multiple records in Active_Activities_temp and if a participant has a record that does exist in ACTIVITY_CORE_LISTING, no records for that participant should appear in this query result. For example, if a participant has two records in Active_Activities_temp, one with a cde_actv 38 (which does not appear in ACTIVITY_CORE_LISTING) and one with a cde_actv 33 (which does appear in ACTIVITY_CORE_LISTING), no records for that participant should appear in the result. Currently the record with cde_actv=38 does appear.
What code can I implement to do what I need to do? Thanks so much.
View 5 Replies
ADVERTISEMENT
Aug 5, 2014
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
View 2 Replies
View Related
Oct 10, 2007
I am getting incorrect results from my paging query, where the same results are being returned multiple times. Here are two queries I have found to bring the same results:select top 20 * from lookupdocuments_dbv where catname_cst='MyCategoryName' and (docid_cin not in (select top 620 docid_cin from lookupdocuments_dbv where catname_cst='MyCategoryName'))select top 20 * from lookupdocuments_dbv where catname_cst='MyCategoryName' and (docid_cin not in (select top 640 docid_cin from lookupdocuments_dbv where catname_cst='MyCategoryName'))When I remove the catname_cst where clause it brings back results properly (i.e. records 622-642 and 643-663). What is wrong with my where clause that is causing identical data to be returned?
View 8 Replies
View Related
Feb 6, 2008
HiI am new to SQL and am having a problem. I need to fix my query to do the following...2) get a total of the number of rows returned.
DECLARE @StartDate varchar(12)DECLARE @EndDate varchar(12)DECLARE @Region varchar(20)
SET @StartDate = '01/01/2002'SET @EndDate = '12/31/2008'SET @Region = 'Central'
SELECTA.createdon,A.casetypecodename,A.subjectidname,A.title,A.accountid,A.customerid,A.customeridname,B.new_Region,B.new_RegionName
FROM dbo.FilteredIncident AINNER JOIN dbo.FilteredAccount B ON A.customerid = B.accountid
WHERE (A.createdon >=@StartDate AND A.createdon <= @EndDate)AND (B.new_RegionName = @Region)AND (A.casetypecode = 2)
View 1 Replies
View Related
Jul 23, 2005
I am attempting to create a simple recordset that would return thenumber of duplicates that exist in a table with a single column. Forexample if I had a table like the following:ID Reference Amount1 123456 1.002 123456 2.003 123 1.00I would like to get the following result:ID Reference Amount RecCount1 123456 1.00 22 123456 2.00 23 123 1.00 1Please help!Thanks,Shawn
View 2 Replies
View Related
Jan 28, 2014
These separate COUNT queries are very fast:
SELECT COUNT(id) as viewcount from location_views WHERE createdate>DATEADD(dd,-30,getdate()) AND objectid=357
SELECT COUNT(id)*2 as clickcount FROM extlinks WHERE createdate>DATEADD(dd,-30,getdate()) AND objectid=357
But I want to add the COUNT statements, so this is what I did:
select COUNT(vws.id)+COUNT(lnks.id)*2 AS totalcount
FROM location_views vws,extlinks lnks
WHERE (vws.createdate>DATEADD(dd,-30,getdate()) AND vws.objectid=357)
OR
(lnks.createdate>DATEADD(dd,-30,getdate()) AND lnks.objectid=357)
Turns out the query becomes immensely slow. There must be something I'm doing wrong here which results in such bad performance, but what is it?
View 7 Replies
View Related
Aug 26, 2013
I have a query that is counting the number of applications gotten for the day.
SELECT (usr.FirstName + '' + usr.LastName)AS [Sales Team Member], stm.UserID,
COUNT (MerApp.ApplicationID)AS [Number of Apps]
FROM MerchantApplication MerApp
INNER JOIN Users usr ON MerApp.assignedTo = usr.UserID
INNER JOIN SalesTeamMembers stm ON usr.UserID = stm.UserID
INNER JOIN SalesTeams satm ON stm.SalesteamID = satm.SalesTeamID
WHERE MerApp.LastUpdateOn BETWEEN @strStartofDays AND @strEndDate AND MerApp.ApplicationStatus=3 AND STM.ActiveStatus=1
GROUP BY MerApp.AssignedTo, usr.LastName, usr.FirstName, stm.UserID, stm.SalesteamID, MerApp.ApplicationStatus, satm.TeamDescription
LastUpdateOn is the days the table is updated
Since it's just a 24hr count I should have to use BETWEEN in my where clause. What is another way to count for 1 day.
View 5 Replies
View Related
Feb 12, 2008
Hi Faculties,I have two queries which give me the same output.-- Query 1SELECT prod.name, cat.nameFROM products prod INNER JOIN categories catON prod.category_id = cat.idWHERE cat.id = 1;-- Query 2SELECT prod.name, cat.nameFROM products prod INNER JOIN categories catON prod.category_id = cat.id AND cat.id = 1;The first query uses the WHERE clause and the second one has all theconditions in the ON clause. Is there anthing wrong with the secondapproach in terms of performance? Please suggest.Thanks in advanceJackal
View 6 Replies
View Related
May 23, 2008
Hello,
I have a query that creates a list of values. There are labtestcodes that are assigned to different value codes so for example
labtest code, value code
003277 Height
003277 Hgtunt
003277 TotVol
008300 Height
008300 Hgtunt
008300 TotVol
I want to add a count column to this query that will count the number of value codes in each group so for example
003277 Height 1
003277 Hgtunt 2
003277 TotVol 3
008300 Height 1
008300 Hgtunt 2
008300 TotVol 3
Is there a way to do this in the current query I have?
With labtestcheck (labtestcode)
as
(
selecta.labtestcode
fromEMR_temp_labtest_configupdate a
WhereNot Exists (Select * From lab_test_add_conf b where b.labtest_key = a.labtestcode)
)
selectt.labtestcode,b.zsegcode,b.valuecode,b.valuedesc,b.valuetype,b.units,b.tablename,b.fieldname
fromEMR_temp_labtest_configupdate a
inner joinemr_zseg_code_descriptions b on a.zsegcode = b.zsegcode
inner joinlabtestcheck t on t.labtestcode = a.labtestcode
View 2 Replies
View Related
Apr 18, 2008
I am attempting to do something like this...
select * from applebucket ab where 2 = (select count(id) from apples ap where ap.applebucket_id = ab.id)
SSCE 3.1 throws the following
There was an error parsing the query. [ Token line number = x,Token line offset = y,Token in error = SELECT ]
Any help would be greatly appreciated!
View 3 Replies
View Related
May 22, 2008
I have two queries:
select count(*)1 from TABLE1
where Date1 < x
and
select count(*)2 from TABLE1
where Date1 < x
and Date2 > x
what I want is to get the result as a single number in other words Count(*)1+Count(*)2 = ?
I am having difficulty adding these two statements
Thanks
View 4 Replies
View Related
Aug 7, 2015
I have an autogenerated MDX.
Select
Non
Empty{[Measures].[Exposure
Amount]} On
Columns,
Non Empty TopCount(
( AddCalculatedMembers(
[Code] ....
As a result I only get 29 records. One record in the middle is missing. If I change to Topcount 31 I get 32 records, where the missing record is also included.
If I remove the Zero supression I receive 30 records as expected. For me the MDX looks good. I will try to reproduce on AW.
View 5 Replies
View Related
Oct 16, 2014
How SQL calculates the estimated row count when < or > are used in the WHERE clause of a statement. For example:-
WHERE Created_Datetime_utc > CONVERT(DATETIME,'2014-10-14 10:00:00',102)
I know how the estimated number of rows are calculated when an = is used but I've been googling and cannot find anything about < and >.
View 2 Replies
View Related
Dec 12, 2007
SELECT COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END) AS [New Visitors],
COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END) AS [Returning Visitors]
FROM content_hits_tbl
WHERE (hit_date BETWEEN DATEADD(mm, - 1, GETDATE()) AND GETDATE())
=======================
How do I add up both COUNT/CASE columns? Would it be:
SUM([New Visitors] + [Returning Visitors]) AS Total
I tried this and it doesn't work. I get invalid column names error for both.
I have even tried:
SUM([COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END)] + [COUNT(DISTINCT CASE WHEN visit_type = 0 THEN visitor_id END)]) AS Total
You would think that there would be some gui functionality in VS08 that would do this...
Thoughts are greatly appreciated!
TT
View 8 Replies
View Related
Aug 18, 2005
Arvind writes "i want to create a stored procedure returns an OUTPUT variable containing the no. of records given by a query, the query being dynamic.
Preferrably the query should also be passed as a parameter to the stored procedure...If not,it should be constructed in the SP and a Part of the where clause is dependant on the value of another variable passed to the SP.
How should the query be constructed, executed, and then the Count(*) value returned?
"WHERE <condition1> AND <condition 2> ;
"AND <condition 2> " may exist or may not exist in the query; it is dependant."
View 1 Replies
View Related
Nov 19, 2015
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015'
DECLARE @enddate date = '10-31-2015'
DECLARE @afterTime time = '17:00'
SELECT
General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
[Code] ....
View 20 Replies
View Related
Aug 21, 2007
The following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
View 1 Replies
View Related
Jul 30, 2015
For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?
I want my output to be
CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc
Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.
I want to do it using SELECT. Is it possible?
View 13 Replies
View Related
Jul 13, 2007
I am building a search application that has several fields in it - I want to be able to allow the user to put in specific search criteria or all them to say "All" and then pull back any records with anything in that row.
Example
Select *From mytableWHERE (SDate >= 1-1-2007) AND (EDate <= 1-25-2007) AND (Location = "ALL" or In ALL) this is where I am cloudy.. What/How would I write in the query to pull back everything, I know I could just leave the Location out of the query all together, but then that does not allow them to select just one the next time they run the application.
Thoughts?
Thanks,Ad.
View 4 Replies
View Related
Oct 14, 2005
Hi everyone, I am trying to run this query and it is not returning a single row. Although I can see one row with this 10/14/2005 date in the table.SELECT iSourceId, UserId,FROM tblEmployeeWHERE dtInsertDate >= '10/14/2005' and dtInsertDate <='10/14/2005'I also tried to rewrite the query this waySELECT iSourceId, UserId,FROM tblEmployeeWHERE dtInsertDate = '10/14/2005' but still it is not returning a single row.Please let me know what am I doing wrong.Thanks.
View 2 Replies
View Related
Aug 30, 2004
Question..
In a MSSQL SELECT Statement e.g
SELECT t1.fname, t1.lname, t2.district_name, t2.district_number FROM t1 AS table1, t2 AS table2 WHERE t2.district_name LIKE 'S%'
i have these values in the table
table1
fname lname
mike jackson
roy mires
table2
district_name district_number
South 123
Daggerty 7845
duffel 7224
rubble 7545
Now the query is dynamic (the letter is that the like clause is run against)
When the letter D is searched for i get the 2 colums duffel, daggerty BUT when S is searched against I get nothing..
I am confused as to why, It doesn't seem to be case sensitive, as the 2 colums duffel and Daggerty 1 is d is in lowercase and the other is in uppercase. andive tries both lowercase s and uppercase S and still got nothing.
Is tehre a better way to use the LIKE clause? Ive looked and looked for documentation about the LIKE clause but I cannot find anything
Am i doing something wrong?
any help would be greatly appreciated
View 1 Replies
View Related
Jun 17, 2004
Hi all,
In Oracle 'ROWNUM' can be used with any variables.
eg : select sno from test1 where rownum < variable1 ( say variable1 is a local variable )
Is there any equivalent for the above in SQL Server ?
Hint :
If 'select sno from test where rownum < 10' in Oracle, then SQL Server equivalent is 'select top 9 sno from test'.
The same way I need the equivalent for the above.
Thanks,
Sam
View 1 Replies
View Related
Mar 13, 2007
Hi folks,
How can I get all names that start with "sci" or "eng" without using the OR clause. In other words, how can I modify the following statement so I don't use the OR clause:
select * from course where (name like 'sci%' or name like 'eng%')
Can I use regular expressions to achieve that?
Thanks!
-Parul
View 14 Replies
View Related
Feb 1, 2007
Hi,
I am writing MDX query to retrive a set of data based on selected range of date.
I have written a MDX query but it is not filtering .
My code:
SELECT NON EMPTY { [Measures].[Fact Table Count] } ON COLUMNS, NON EMPTY topcount({ ([Date Time1].[Date Time1].[Date Time1].ALLMEMBERS ) } ,1000)DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM ( SELECT ( [Date Time1].[Date Time1].&[2006-01-25T05:53:07] : [Date Time1].[Date Time1].&[2006-02-25T15:53:56] ) ON COLUMNS FROM [Cube Analysis]) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
This code should display only data with selected range of date but it displaying all data.
Can any one give a solution to filter the data based on Date using WHERE clause.
Thank you.
View 2 Replies
View Related
Aug 25, 2007
I am trying to insert a value numeric + 1 in to db table but i get error when i do this
this is the code
Const SQL As String = "INSERT INTO [PageHits] ([DefaultPage]) VALUES (@defaultP)"Dim myCommand As New Data.SqlClient.SqlCommand(SQL, myConnection)myCommand.Parameters.AddWithValue("@DefaultP" + "1", DefaultP.Text.Trim())
myConnection.Open()
myCommand.ExecuteNonQuery()
myConnection.Close()
The Error:
Must declare the variable '@defaultP'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Must declare the variable '@defaultP'.
View 1 Replies
View Related
Sep 14, 2007
i want to add vales in a query
this is my scenario (how can i add the price column values and display as one record) ex. 222 17
table = table1
tep1 price (column)
222 5
222 2
222 10
View 2 Replies
View Related
Sep 5, 2007
Does anyone know how to count rows of data from 1 table that meet one or two different criteria and then get the probability of occurance for that criteria ... as an output column?
Do I use 'Having' or temp tables or Views?
Here is my output for now. I am trying to solve for 'Prob' - everything else works on it's own.Craig
SELECT Wins_Lng/Trades_Lng as Prob
FROM Transactions
SELECT Count(Ticker) as Trades_Lng
FROM Transactions
WHERE TransType='C' AND DateDiff(day,BaseDate,GetDate())<=100 AND TransKind='B' (SELECT COUNT(Ticker)as Wins_Lng
FROM TransactionsWHERE Transkind='B' AND TransType='C' AND DateDiff(day,BaseDate,GetDate())<=100 AND Profit_Lng>=0)
View 2 Replies
View Related
Jun 29, 2005
I have a column in the database that stored moduleId that are seperated by '|' (pipes). For Example: '527|343|454'
I need to add a where clause to a query that pulls the data based on a
ModuleId. For Example: select * from table where 527 in [column above]
Does anyone know how I can do this in a query? Normally I could
use an IN statement, ex: select * from table where 527 in (527,343,454)
How can I get the column in that format?
Thanks for the help in advance,
KM
View 2 Replies
View Related
Apr 30, 2002
I want to export an SQL Server table to an Excel Spreadsheet driven by a web interface.
I am using Cold Fusion to call a SQL Server Stored procedure. The SP accepts a variable (IDlist) from the web page and sets this to a Global Variable.
EXEC @hr = sp_OASetProperty @oPKG, 'GlobalVariables("outIDlist").Value', @outIDlist
The SP then executes a DTS package to export to Excel. The DTS package uses the Global variable in the SQL Query thus:
SELECT ...
FROM ...
WHERE tblPropertyRegister.IDProperty IN (?);
This works fine when I pass one single ID (@outIDlist = "20") into the stored procedure.
But it returns no records when I pass multiple IDs (@outIDlist = "19, 20, 21") into the stored procedure. It works fine also if I "hard code" the IDlist into the DTS query (eg WHERE tblPropertyRegister.IDProperty IN (19, 20, 21);).
The problem appears to be in the setting of the global variable in the stored procedure.
Has anyone had any experience with this? Any feed back would be greatly appreciated. TIA
Alan
View 2 Replies
View Related
Dec 13, 2006
I got SQL Query error with this sql statement....
Code:
sSQL = "SELECT VIN, Year, MakeID AS 'Make', ModelID AS 'Model', Name AS 'Dealer', PhoneOne AS 'Phone', StockDate AS 'Stock Date', SoldDate AS 'Sold Date', RepairCost AS 'Repair Cost' FROM "
sSQL = sSQL & sView
sSQL = sSQL & " WHERE VIN = '" & sVIN & "'"
The error I got is invalid column 'MakeID' and invalid column 'ModelID'. I'm not familiar with the term "AS" in SQL so can anyone explain what's the problem here?
View 3 Replies
View Related
Jan 16, 2005
Hello,
I've put together the following query, but it has been unsuccessful running it so far.
Code:
select * from Contractors.dbo.Contacts
where VendorNo in (select No_ from [BMIS Live Database].dbo.[BMIS Live Database$Vendor]
where [Name] like '%of%')
I receive the following error when I run it in Query Analyzer:
Code:
Server: Msg 446, Level 16, State 9, Line 1
Cannot resolve collation conflict for equal to operation.
I'm trying to grab values from the column, "No_" in the Bmis.. database then only select data from the Contractors database if the VendorNo column holds one of the values grabbed from the Bmis.. database. I think my syntax is just completely wrong but hopefully someone might pick up on my mistakes. Any help would be greatly appreciated, thanks!
Alex
View 2 Replies
View Related
May 22, 2006
I've got a set of records that has a varchar data type with most of the info being numeric, i.e.
002563256
025636982
000025632
99% of the data is similar to this but there are a few oddbals with alpha characters:
a2532222
is there a way to put something like an 'is numeric' in the where clause?
View 1 Replies
View Related
Jul 23, 2005
This is my queryselect ano,max(date),a_subject from MY_TAB where table_name='xyz' andano=877group by a_subject,ano order by a_subjectANOmax(Date)A_Subject8772005-01-20 00:00:00.000Subject_18771900-01-01 00:00:00.000Subject_28772004-12-20 00:00:00.000Subject_38772005-01-19 00:00:00.000Subject_4--------------------------------------------------------------------------When I put the status column in, it fetches all the rows.select ano,max(date),a_subject,status from MY_TAB wheretable_name='xyz' and ano=877 group by a_subject,ano,status order bya_subjectANOmax(Date)A_SubjectStatus8772005-01-20 00:00:00.000Subject_1Not Started8771900-01-01 00:00:00.000Subject_2Not Started8772004-12-20 00:00:00.000Subject_3Completed8771900-01-01 00:00:00.000Subject_3Not Started8771900-01-01 00:00:00.000Subject_4Not Started8772005-01-19 00:00:00.000Subject_4Not Started-----------------------------------------------------------------------now what i want isANOmax(Date)A_SubjectStatus8772005-01-20 00:00:00.000Subject_1Not Started8771900-01-01 00:00:00.000Subject_2Not Started8772004-12-20 00:00:00.000Subject_3Completed8772005-01-19 00:00:00.000Subject_4Not StartedThanks a lot for your help.AJ
View 2 Replies
View Related
