<P>Greetings,</P>
<P>I am new to reporting services and am struggling with trying to add a column to the end of matrix report that has totals. You can see a jpg of the report at http://www.catertots.com/matrix.jpg What I need to do is repeat the school code that is in the first column into another column that follows the total. </P>
<P>Any help would be much appreciated.</P>
Hello Guys,
I am working on a matrix report which has several row groups and 1 column group. After execution, the column group wil end up with several columns containg numeric counts. I would like to have the grand total for each "column group" column as a last row on this report.
For row groups you can just right click "Subtotal", but that is not possible for column group. Could someone please help me to find a clever way of accomplishing this, please. Thank you so much for your help!
There seems like there must be a way, but I'm a bit new to power BI. Â I've easily created a pivot/matrix summary table with all the numbers I need except one.....Percent of Total.For example, my table looks like the table below. Â What do I need to do to add an additional row that calculates the Percent of Total? Â So in this example, I'm looking to calculate the values of 40% (40/100) and 60% (60/100).
 1     2
Total
Row 1 20
10 30
Row 2 15
20 35
Row 3 5
30 36
Total 40
60 100
% Total 40% 60%
Hi Everyone,
I am designing a report in SQL Server 2005 Report Designer that uses a Matrix table. The matrix table is grouped by month. How can I add a Year-To-Date total column on the report? This is driving me nuts...I cannot figure this out.
Thank You
-Sam
Hi. I am looking to create a Matrix-based Report in SQL Server 2005 Reporting Services. I have my query, and a dynamic number of both rows and columns. I have Totals on the "bottom" and "right".
What I'd like to do is add a Percentage column to the right of the right-based Totals column. So the columns would read Col1, Col2, .., ColN, Total, Percentage.
Is this possible???
Thanks.
Hi,
I have created a matrix with multiple rows in the main data cell and a subtotal at the end of the row. The first row in my matrix main cell is just a count of records, whereas the 2nd row is a % of the value in the 1st row compared to the total of that row. I have 5 columns in the matrix as below (only first row is shown plus the total row. Ignore any rounding issues):
Status
A
B
C
D
E
Total
02/01/2007
No.
9
32
3
13
0
57
% Total
15.00%
56.00%
5.00%
24.00%
0.00%
100.00%
Total
No.
77
143
25
72
2
319
% Total
135.00%
350.00%
48.00%
250.00%
2.00%
556.00%
I have a total column at the end. I want to hide the %Total row within the total row as it does not make sense in this context. Anyone know how to achieve this?
Thanks
Hi,
Hi All,
I am having some trouble getting a Grand Total column at the end of my matrix report (not row at the bottom), such as you get by default in an Excel pivot table.
I have managed so far to add another column that sums up all values across the data range for a particular product code. My intention was to hide all but the last (I did something similar on rows). However you cannot use an expression on the width property for columns, so this will not work.
My report is very standard:
Year
Month (grouped by year)
Product code | Description [qty]
I want a column that displays the total qty across all dates for each row. Surely this is possible?
Any suggestions would be appreciated! Thanks.
I have been working on a website in asp.net1.1 in vb.net2003. I am using a sql2000 server. I am attempting to add a column to my datagrid that will add the total number of wins and output the number in that colum. With some help, I have been able to write the code. However, I am not sure where to put it. Is it a sql function I need to call from my code to add to the win column? Thanks for your help.
View 1 Replies View RelatedThis is a very simple select but I would like to add a final column that adds the QOH, QOB, QOO and Quantity. How can I accomplish this? Thanks
SELECT DISTINCT
zcus_MM_Medsurg_Used.stock_no,
zcus_MM_Medsurg_QOH_Only.qty_on_hand AS QOH,
zcus_MM_Medsurg_Used.QOB,
zcus_MM_Medsurg_Used.QOO,
zcus_MM_Medsurg_Used.QUANTITY
FROM
zcus_MM_Medsurg_QOH_Only INNER JOIN
zcus_MM_Medsurg_Used ON
zcus_MM_Medsurg_QOH_Only.stock_no = zcus_MM_Medsurg_Used.stock_no
Hi All,
I need to show the Cumulative calculated value only in Total by year/Group. I could not use Visibility expression using
InScope, as it creates *Blank column. Please go thru details below.
Year
Month01 02 03 Total
Salary Salary Salary Salary Cumulative (Calc)
Employee01 20 5 25 25
Employee02 10 10 20 45
.....
Total
How can i achieve this?. Any suggestion on this would be appreciated.
Thanks,
I have a matrix report with 2 column SaleAmount and ProfitAmounts by Month like
Sale Profit
Dealer 5/1/2007 6/1/2007 7/1/2007 5/1/2007 6/1/2007 7/1/2007
A 100 200 300 20 25 15
B 200 250 50 30 45 19
how can i do following 3 things
1)Add Total column for Sale and Average column for Profit
2)Sort report by lastMonth of Sale (here 7/1/2007) High to low
3)if last month of sale(here 7/1/2007) is less than second last month here (6/1/2007) whole row should be red
thanks
Hi, can anyone help?
I have created a Report using Visual studio-the report displays a subreport within it.
On the Subjective Report I have 12 values for each month of the year.
For the first month the value is =sum(Fields! Month_1.Value), and I
have named this text box €™SubRepM1€™
The name of the subreport is €˜subreport1'.
On my Main Report, again I have 12 values for each month of the year.
For the first month the value is =sum(Fields! Month_1.Value)*-1, and I
have named this text box 'MainRepM1'
The name of the main report is 'GMSHA Budget Adjustment Differentials'
The report displays both of the subreport and main report values
but I now need to total these values together for each month in order to
produce a grand total.
I have tried using the following to add the totals for Month 1 together,
=subreport1.Report.SubRepM1 + MainRepM1
but this does not work and I get the following error message €˜The value expression for the text box 'textbox18'contains an error [BC30451] Name subreport1 is not declared'.
I feel that it should be a simple matter of adding the two sets of values together but I€™m having major problems trying to get these totals to work.
Can anyone help, thanks
I'm trying to get to something like this:
New York
London
Paris
M
F
M
F
M
F
2007 Wk 31
59%
41%
69%
31%
64%
36%
2007 Wk 32
63%
37%
67%
33%
66%
35%
2007 Wk 33
61%
39%
71%
29%
66%
34%
The problem that I have is that I can reference the total for the row: SUM(Fields!total.Value, "matrix_rpt_week") but I don't know how to reference the sub-total for the relevant group (eg London). Once I have this I can use it as the divisor in my calculation. I've tried using InScope but can't get it to return the value I need. Any ideas?
Hi
i am using Matrix in one of reports, every thing is cool, but i need one more sub column(like subtotal) which should display Percentage
Clearly
I developed report in following formate and working Fine
c1 c2 c3 c4 (subtotal)
Row1 1 2 2 2 7
Row2 0 1 2 3 6
Row3 0 1 3 4 8
(subtotal) 1 4 7 9 21
but what we need is
c1 c2 c3 c4 (subtotal) (%)
Row1 1 2 2 2 7 33.33% --- (i.e..((7/21)*100)
Row2 0 1 2 3 6 28.57%
Row3 0 1 3 4 8 38.09%
(subtotal) 1 4 7 9 21
Any Hint about this ?
Can we do this?
Adding more columns in a matrix report that don€™t
belong to the columns drilldown dimensions€¦
That is, for example, having the following report:
Product Family
Product
Country City Number of units sold
Then I
would add some ratios, that is, Units Sold/Months (sold per month) and other that
is the average for Product Family (Units Sold/Number of Product Family), for putting an example€¦ some
columns should be precalculated prior to the report so do not get into it, the
real problem I don€™t see how to solve is adding one or two columns for showing
these calculated column that doesn€™t depend on the column groups but they do
for the rows groups€¦
Any guidance
on that?
The only
way I am seeing by now is to set it as two different reports, and that is not
what my client wants€¦
Many
thanks,
Jose
Hi
I have a report that calculates shipping quantities based on customer orders, and color codes them based on whether or not we have stock for a full shipment (green), have partial stock for a shipment (blue), or if we have none (red). Every week we get customer orders and build accordingly.
I have this all worked out except for parts with multiple ship to locations. RS seems to parse the entire row of the first ShipTo, then the second ShipTo. I'm using the running total function to calculate if there is a need or not. Anybody have any ideas?
Here is an example of the output I am getting. On the 17th, the 360 should be in green not red. I double checked the grouping, and it is on part number. This is for a matrix.
http://img519.imageshack.us/img519/8650/productionqg0.png
Hi There i have a Report That Display's data in following format
Areas
Code | Descirption | Emirates | GCC | ASIAN | OTHER ARABS | so on..
1 What ever 3 0 2 1
2 ABC 0 0 1 0
-------------------------------------------------------------------------------------------
Total 3 0 3 1
The Areas are Matric Columns and are dynamically generated .
i dont want sub total of each row , but i want Grand total at the end of the all columns generated by matrix
I have no clue how do to it
Kind Regards
I got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing,
(
(Fields!Amount.Value)
/Previous(sum(Fields!Amount.Value))
)
)
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category")
should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
Hi I have a matrix table with
Status as the row heading and month as the column heading. The detail is a count off the records which fall into these statuses and the month columns.
The detail also contains a navigation link to a subreport which returns the records which make up the count.
For example if the detail contains a 7 , when i click on the 7 it returns 7 records with details off these records. The subreport accepts 2 parameters which is passed over from the navigation link, the parameters are - status id and month.
My question is - I have put a total on the matrix for the month columns, when i click on the total value the subreport appears (as the total is treated as part off the details) but it does not return the correct number off records. Im unsure as to why the total would not return all records , but it seems it is not passing the month parameter correctly, it seems to not to know to pass 'all' months which appear on the matrix as it is the 'total'. It seems to get confused and returns records only for a particular month. I thought the matrix would be smart enough to know that when a total has a navigation to return all records.
Can someone please help
thanks
Hi,
If I am taking a Matrix and right clicking on the column header and click on the SubTotal then it always place that column on the right of it .If I want to place that column to the left of my original column then I can't do it.
Adding manual column and then puuting the Expresstion =Sum(Fields!MyCol.Value) is not halping as it will give me the same value that is there in the column instead of giving me the column
-Thanks,
Digs
Hi
I have a Matrix Like This
Sales Type AZ CA ID NV WA OR Total
No Surplus 1 2 1 3 4 1 12
Reverted 1 4 2 4 7 2 20
Surplus 2 4 1 2 2 1 12
This "Total" is of All States(AZ, CA, ID, NV, WA, OR). But I Just want the total of
just four states i.e(ID, NV, WA, OR). And I also Want that States which are not included in the total i.e(AZ, CA) Should also appears in the matrix , but their values should not include in the total.
I have already applied the filter on the subtotal, but (AZ, CA) did'nt appears in the matixr after filter.
thanks
Regard
Mohammad Yaseen
I have a dataset with weekly salary of multiple employees of same grade from different dpt. We are not going to show the report based on employ. The report will be showing data based on Employee grade and their department.
Grade        Dpt       wk1         wk2         wk3       wk4
manager    hr         3000         2500        1000      2000
senior         hr          1300         1500        1300      1600
manager    hr          2500         2300        2100       3000
We need to show the result by grouping grade and dpt. So the Wk1 rate will be the sum of (3000+2500).
Grade       Dpt        wk1           wk2        wk3      wk4     Total
manager   hr           5500        4800        3100       5000      18400 (how to find???)
senior       hr           1300         1500        1300      1600      5700(??)
Total                       6800         6300       4400       6600      24100(??)
How to find the total for each row on the right most end ?
I was wondering what is the best way to have a amount paid total from amounts entered to a specific id or column? I am using SQL 2005. I need to be able to tally the total amount paid and put that value in another column called amount paid. Any help would be great.
Thanks,
EX: I have a table for products, and each product has a quantity. How can I add up the QTY field in all the rows to find out the total QTY of all the products.Any help would be greatly appreciated.gkc
View 4 Replies View Related
I was trying to write an expression someting like this.
(CASE WHEN (GroupVar2 IN('CBank','DTC', 'EDirect')) THEN GroupVar2 ELSE 'InstLend' END) AS COALESCE(GroupVar2,'Total') AS GroupVar2
In GroupVar2 column, following values are available;
CBank
DTC
EDirect
InstLend
Inst-Load
I use this for a parameter in my report. I want to consider inst-Load as the same as InstLend. In drop down menu , I should see only InstLend. When I select it, I should get summation of InstLend and Inst-Load.
Also I should see 'Total' as one of the available value. So when I select total it should give me summation of all of above.
Can anyone help me to write this corretly?
Thanks
Hi,
View 13 Replies View RelatedHi,I am trying to add a staggered running total and average to a queryreturning quarterly CPI data. I need to add 4 quarterly data pointstogether to calculate a moving 12-month sum (YrCPI), and then tocomplicate things, calculate a moving average of the 12-month figure(AvgYrCPI).Given the sample data:CREATE TABLE [dbo].[QtrInflation] ([Qtr] [smalldatetime] NOT NULL ,[CPI] [decimal](8, 4) NOT NULL) ON [PRIMARY]GOINSERT INTO QtrInflation (Qtr, CPI)SELECT '1960-03-01', 0.7500 UNIONSELECT '1960-06-01', 1.4800 UNIONSELECT '1960-09-01', 1.4600 UNIONSELECT '1960-12-01', 0.7200 UNIONSELECT '1961-03-01', 0.7100 UNIONSELECT '1961-06-01', 0.7100 UNIONSELECT '1961-09-01',-0.7000 UNIONSELECT '1961-12-01', 0.0000 UNIONSELECT '1962-03-01', 0.0000 UNIONSELECT '1962-06-01', 0.0000 UNIONSELECT '1962-09-01', 0.0000 UNIONSELECT '1962-12-01', 0.0000 UNIONSELECT '1963-03-01', 0.0000 UNIONSELECT '1963-06-01', 0.0000 UNIONSELECT '1963-09-01', 0.7100 UNIONSELECT '1963-12-01', 0.0000 UNIONSELECT '1964-03-01', 0.7000 UNIONSELECT '1964-06-01', 0.7000 UNIONSELECT '1964-09-01', 1.3900 UNIONSELECT '1964-12-01', 0.6800 UNIONSELECT '1965-03-01', 0.6800 UNIONSELECT '1965-06-01', 1.3500 UNIONSELECT '1965-09-01', 0.6700 UNIONSELECT '1965-12-01', 1.3200I am trying to return the following results:Qtr CPI YrCPI AvgYrCPI-------- ----- ----- --------1-Jun-60 1.481-Sep-60 1.461-Dec-60 0.721-Mar-61 0.71 4.371-Jun-61 0.71 3.601-Sep-61 -0.70 1.441-Dec-61 0.00 0.72 2.531-Mar-62 0.00 0.01 1.441-Jun-62 0.00 -0.70 0.371-Sep-62 0.00 0.00 0.011-Dec-62 0.00 0.00 -0.171-Mar-63 0.00 0.00 -0.181-Jun-63 0.00 0.00 0.001-Sep-63 0.71 0.71 0.181-Dec-63 0.00 0.71 0.361-Mar-64 0.70 1.41 0.711-Jun-64 0.70 2.11 1.241-Sep-64 1.39 2.79 1.761-Dec-64 0.68 3.47 2.451-Mar-65 0.68 3.45 2.961-Jun-65 1.35 4.10 3.451-Sep-65 0.67 3.38 3.601-Dec-65 1.32 4.02 3.74Note, 4 data points are required to calculate a moving sum of CPI(YrCPI) and 4 calculate YrCPI figures are required calculate theannual average of YrCPI (AvgYrCPI), giving a staggered effect to thefirst 7 resultsThis sad effort is about as far as I've got:SELECT I.Qtr, I.CPI, SUM(S.CPI) AS YrCPIFROM QtrInflation IJOIN (SELECT TOP 4 Qtr, CPIFROM QtrInflation) SON S.Qtr <= I.QtrGROUP BY I.Qtr, I.CPIORDER BY I.Qtr ASCCan anyone suggest how do achieve this result without having to resortto cursors?Thanks,Stephen
View 5 Replies View RelatedI need to add a textbox in the report which would display the total number of rows in the report.I need to do this in reports which have either tabular layout or a matrix layout .
Thanks in advance
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015'
DECLARE @enddate date = '10-31-2015'
DECLARE @afterTime time = '17:00'
SELECT
General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
[Code] ....
I have a Monthlyexpense column. How do I Sum up this column and put the Total in my ytdexpenses column. I think I figure out the query, but I don't know where to write the query at. Please help.
View 3 Replies View RelatedI want calculate to my total column sum
ex- col 1 col 2 col 3 col 4
raj 10 20 20
pani 20 88 88
tiger 87 78 89
john 77 77 77
---------
??
----------
I have a table like below, which is  contain area, zone, branch wise value. In that i want to get company total as a column and area total as a another column and zone total in next column
AREAZONEBRANCHVALUE
TNCENTRALAMB100
TNCENTRALTNF100
TNCENTRALSDGD100
TNCENTRALERW100
TNNORTHAMB50
[Code] ....
My expected output is like below
AREAZONEBRANCHVAL comtot areatot zonetot
TNCENTRALAMB1001200560400
TNCENTRALTNF1001200560400
TNCENTRALSDGD1001200560400
[Code] ...
I achieved this by using query but its will affect performance because my real time scenario dealing with laks of records
select a.*,b.company_tot,c.area_tot,d.zone_tot from FESIBILITY_CHECK a cross join (select SUM(value)company_tot from FESIBILITY_CHECK )b
join (select SUM(value)area_tot,area from FESIBILITY_CHECK group by area)c on a.AREA = c.area
join (select SUM(value)zone_tot,area,zone from FESIBILITY_CHECK group by area,zone)d on a.AREA=d.area and a.ZONE = d.ZONE
So I planned to use cube and roll up but i don't get desired result ...
What is the syntax for adding a column where you are adding a year to a date in a date format? For example adding a column displaying a year after the participation date in date format?
View 1 Replies View Related