Adding Landscape And Portrait Subreports Into A Single Report

Sep 27, 2006

The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over. Your suggestions / comments are appreciated.

Thanks!

View 1 Replies


ADVERTISEMENT

Linked Report Printing In Portrait Instead Of Landscape

Apr 15, 2008



We have a report that prints correctly (in landscape) in the folder that is deployed to but the linked report in a different folder prints in portrait?

can anyone shed some light on this.

View 2 Replies View Related

PDF Appears In Landscape But Prints In Portrait

Apr 28, 2008

All of my reports that are formatted 11x8.5 are outputting to PDF correctly. When I open the PDF in Adobe Acrobat, it appears in Landscape on the screen. However, when I click the print button, by default it is printing it in portrait. I can go to File-->Print Setup and change the orientation from Portrait to Landscape, but why doesn't it translate from the file orientation? This may just be a bug in the Adobe Acrobat software, but I want to make sure there isn't something I can do.

Thanks.

View 1 Replies View Related

Portrait Or Landscape And Page Break After Group Yes/No

Dec 5, 2007



Hi

I'd like a parameter for the report layout: Portrait Or Landscape. So is it possible to set the page high and width using an expression or in code based on my parameter?

Also on a similar note. I want a parameter for 'Page Break After X'. Is it possible to apply a page break after my table group X based on this parameter? I know if I edit the group I can tick 'page break at end' but I can't apply an expression to this.



Cheers

View 8 Replies View Related

Adding Subreports To Master Report At Runtime

Mar 12, 2007

Hi guys,

Is it possible at runtime to decide what subreports you want in your master report. Is this possible in RS?. Many Thanks in advance.

View 6 Replies View Related

Combining Multiple Subreports Into A Single Report

Oct 2, 2006

The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report that contains them defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over producing blank pages. Are there any work-arounds to concatenate multiple, single report PDFs into a single PDF and have page numbering too?


Thanks!

View 11 Replies View Related

Reporting Services :: Position Report In Centre Of Browser AND Export To A4 Portrait PDF

Jul 29, 2015

I know how to size my report to export successfully to A4 portrait PDF and I can position the report in the centre of the browser window BUT I can't do both! I would really like to be able to position it in the centre of my browser window AND be able to print to A4 portrait PDF. If I have the report in the centre (by adjusting the body to take up the whole screen and positioning the report in the centre), it is cut in half when exported to PDF. I can only get it to export to PDF correctly, if the report is aligned to the left of my screen in the browser. Is there a way to move the body to the centre or any other tricks?

View 5 Replies View Related

Few Subreports Not Rendering After Adding Script Code

Oct 8, 2007



Hi All,
I have a report which has a few subreports in it. Earlier I had drop downs for Begin and End dates (these are the parameters), which I populated from date column of the table the report is generated from. The report along with the subreports was rendering correctly.

Now, the requirement is that, instead of drop downs, it should be a text box and it should have a default value. For that I added a bit of VB Script code to have a default values to be populated to the text boxes for Begin and End dates. NOW, the problem has surfaced that almost none of the reports are getting rendered.

What could be the problem? Below is the code I have added. It is basically to have

the begin date as "now -1 at 00:00:00.000" and the end date as "now - 1at 23:59:59.999". The values are properly getting into the boxes.




Code Block
Public Function GetMyStartDateFromCustomCode() As String
Dim ReturnValueStartDateFixed As String
ReturnValueStartDateFixed = Replace(FormatDateTime(DateAdd("d", -1, DateTime.Today), 2), "/", "-")
ReturnValueStartDateFixed = Month(ReturnValueStartDateFixed).ToString().PadLeft(2, "0") & "-" & Day(ReturnValueStartDateFixed).ToString().PadLeft(2, "0") & "-" & Year(ReturnValueStartDateFixed)
Return ReturnValueStartDateFixed & " " & "00:00:00.000"

End Function

Public Function GetMyEndDateFromCustomCode() As String
Dim ReturnValueEndDateFixed As String
ReturnValueEndDateFixed = Replace(FormatDateTime(DateAdd("d", -1, DateTime.Today), 2), "/", "-")
ReturnValueEndDateFixed = Month(ReturnValueEndDateFixed).ToString().PadLeft(2, "0") & "-" & Day(ReturnValueEndDateFixed).ToString().PadLeft(2, "0") & "-" & Year(ReturnValueEndDateFixed)
Return ReturnValueEndDateFixed & " " & "23:59:59.999"
End Function




Please let me know if the issue is not clear. Thanks a lot.

Mannu.

View 1 Replies View Related

Landscape Report 18 Columns Can't Fit In One Row

Apr 25, 2008

Hi, I need help please!

Apologies for the silly question.

I have a problem where i need to show 18 columns in 1 row but can get it in one row, the most the user wants is 2 rows but the first 4 columns cant be touched.
eg.
row1 Col1 Col2 Col3 Col4 Col5 Col6 Col7 Col8 Col9 Col10 Col11
row2 12 13 14 15 16 17 18 19 20 21 22 23 24 25


I am kind of lost on how to show this in a nice format.

Does anyone have any creative idea, as i would like to capture the users.
The Fields are also lengthy so it makes it difficult.

Please!

Regards

View 5 Replies View Related

Printing A Linked Report In Landscape

Aug 30, 2006

I have a report that is setup to print landscape.

I deploy to Report Manager, print it, and everything works great.

If I create a linked report from the deployed report, the linked report prints portrait.

Does anyone know of a workaround or am I just doing something wrong?

Thanks!!

BobP

View 6 Replies View Related

Print From Report Manager In Landscape

Sep 23, 2005

I've thrown together a homegrown Reporting Services viewer that is basically a wrapper for a browser control. It will reside in our app alongside the Crystal report viewer until we have phased out Crystal.

View 3 Replies View Related

Reporting Services :: How To Design A Report In Landscape A4 Format

Nov 6, 2015

I have a report that I need to develop in landscape format. Also I need it to be landscape when converting to PDF and taking printouts. let me know the exact height and width measurements in inches for the report and report body?

I need the margin to be 0.5 inch. 

View 4 Replies View Related

Report Printing In Landscape From SQL Reporting Services Designer Or Browser

Jan 16, 2007

Hello,

I am trying to print a report in landscape mode from VS 2003 from designer preview or at run time. The users don't want to change a mode manually. I tried to make width 11 or 11.5 in and height 8.5in with zero margins and 0.5in (tried a lot of combinations) - doesn't work! still printing in portrait. Please help! Thank you

View 7 Replies View Related

Display Subreports With In A Main Report

Apr 12, 2007

Hello All,



I have 4 subreports that I need to display in the main report. I can pull a sub-report with in the main report howevere the subreport doesn't display any data. It just gives me a blank template like:



Customer name Customer # Address 1 Address2 city



The subreport itself is not empty when I open it otherwise it shows me a list of all the customers however, no data when I call it as a part of main report.



Can anyone suggest me on this one?

Thanks,

Rashi

View 6 Replies View Related

Report Services Multiple Subreports

Sep 6, 2007

Hi
I can add a single subreport to a report using the code


Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

AddHandler ReportViewer1.LocalReport.SubreportProcessing, AddressOf SetSubDataSource

reportViewer1.LocalReport.Refresh()

End Sub

Public Sub SetSubDataSource(ByVal sender As Object, ByVal e As SubreportProcessingEventArgs)

e.DataSources.Add(New ReportDataSource("DataSet1_tblReportExport", ObjectDataSource1))

End Sub


but i cant add anymore as when i try i get the error

Error: subreport cannot be shown.

Anyone knownhow i add another subreport?

Thanks a lot for your time

View 4 Replies View Related

Report With Subreports And Data-Driven Subscriptions?

Feb 7, 2008

I have problem with using a data-driven subscription on a report with subreports. It works fine when I remove the subreport and generates error even when I add a subreport which only consists of one textbox.

I just was curious to know if using data-driven subscription on a report with subreports is supposed to work?

Thanks,

View 3 Replies View Related

Exporting Report To Excel With Subreports Problem

Mar 8, 2007

Hello,

I got a error when exporting to excel one report that has a table and in a column it has a subreport.

Is this possible to do?

What is the work around?

The error that i got it is the following.


Server Error in '/Reports' Application.
--------------------------------------------------------------------------------

For more information about this error navigate to the report server on the local server machine, or enable remote errors
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors

Source Error:

An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:

[Exception: For more information about this error navigate to the report server on the local server machine, or enable remote errors]

[Exception: An error occurred during rendering of the report.]
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +489
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +959
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +143
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +154
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64






--------------------------------------------------------------------------------

Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210



Thank you


View 2 Replies View Related

Blank Pages In Report With Matrix And Subreports.

Mar 4, 2008

Hi,

I have a master report that contains 4 sub reports. The first two subreports contains matrix controls that can (and will) spill over to a second page. With 5 columns of data the matrix subreports fit nicely onto one page, 6 or more columns and they will spill into a second page. The second two subreports will always fit onto one single page. All four subreports are inside a list control which will repeat for each structure. e.g. Each subreport will be rendered once per structure.

The master report renders perfectly (with no blank pages) whenever the two subreports with the matrix controls fit on one page each. However, whenever the matrix control subreports spill into a second page it causes the master report to insert a blank page after subreport 3 and 4, bare in mind subreport 3 and 4 both fit perfectly on a single page. I've check all margins and page widths etc.

The blank page problem only occurs whenever the matrix needs to span two pages.

Anybody encountered this problem or have any ideas how to fix it? I'm beginning to think it is a bug with reporting services.

Regards,
Adrian.

View 3 Replies View Related

Problem Deploying Subreports With Main Report

Feb 26, 2007

Hi All,

Here's my problem. I have an SSRS report with subreports on it. The main report and subreports work fine on my machine when I run the main report. However, when I deploy them to our test server and change the server name of the shared datasource, only the main report brings back data. The subreports show an error of something like "Error in displaying the subreport" for each subreport. The subreports require parameters that I believe I am supplying from the main report. What am I doing wrong? Is it really necessary to deploy the subreports with the main report to the new server. With Crystal Reports, I didn't have to do this. Any thoughts or suggestions would be appreciated.

View 3 Replies View Related

Reporting Services :: Error When Exporting Report With Multiple Subreports To PDF

Oct 23, 2015

I have a report in SSRS 2008 R2 that has multiple subreports, in fact the report uses the same subreport twice with different parameters.  Then that subreport also has a subreport, which has a subreport.  (It's a complex data scenario with a hierarchy that can go up to three layers deep.)  The report renders fine in report viewer, but when I try to export to PDF I get the following error:

Object reference not set to an instance of an object.

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: Microsoft.Reporting.WebForms.ReportServerException: Object reference not set to an instance of an object.

Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

[Code] ....

Each subreport renders correctly to PDF, and if I remove either subreport from the main report, it also renders correctly.  But the two subreports together on the report cause the error.

Removing the third hierarchy layer (the final one) fixes the issue.  Is there a limit to the number of nested subreports when rendering to a pdf?

View 2 Replies View Related

Landscape Printing From Report Manager Not Printing All Displayed Columns On Each Page

May 3, 2007

I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?

Thanks!

View 3 Replies View Related

ADDING COMMENTS IN A SINGLE STRING

Apr 23, 2007

Hello,
I would like to know if it is possible to add comments from different columns from table in sql into a single column. Please, see the attached table. I want all comments to be in one column. The outcome should be:
CONFIRMED NEED TO CONFIRM SIGNER AT <CR><LF> received e-mail:<CR><LF> Called Imran again today to see if .



Ideally, I would like to receive all comments in a single string of characters, perhaps separating the comments by <CR><LF>

Here is the table. Sorry my table doesnt look good, but it has the following fields: DATE, LEXNEX_DECISION, COMMENT

DATE LEXNEX_DECISIONCOMMENT
4/3/2007COMPLETECONFIRMED NEED TO CONFIRM SIGNER AT 4/3/2007COMPLETEreceived e-mail:
4/3/2007COMPLETECalled Imran again today to see if .

Help!

View 1 Replies View Related

Adding Multiples Data In Single Post

May 21, 2008

I have 3x6 textbox lay out, QTY, Descp, Cost, with submit button with followin code...., insert function has too many function, anyone know how to work thiis type of data entery??  Thanks in advanc.Dim Quntityx() As Integer = {txtQ1.Text, txtQ2.Text, txtQ3.Text, txtQ4.Text, txtQ5.Text, txtQ6.Text}
Dim xDex() As String = {txtD1.Text, txtD2.Text, txtD3.Text, txtD4.Text, txtD5.Text, txtD6.Text}Dim xcost() As Decimal = {txtC1.Text, txtC2.Text, txtC3.Text, txtC4.Text, txtC5.Text, txtC6.Text}
Dim i As IntegerFor i = 0 To 5
itemInput.InsertParameters.Add("RequestN", RequestN)itemInput.InsertParameters.Add("Description", xDex(i))
itemInput.InsertParameters.Add("Cost", xcost(i))itemInput.InsertParameters.Add("Quantity", Quntityx(i))
itemInput.Insert(i)
Next i

View 5 Replies View Related

Adding A Single Change To All Rows In A Column

Jan 16, 2002

View 1 Replies View Related

Adding A Single Change To All Rows In A Column

Jan 16, 2002

We just changed over our phone system and the new system uses all of the old extensions except it adds a 1 to the beginning of them. I know that there is a relatively simple way to update my phone extension column to show this, but I can't for the life of me remember what I need to do. Any help?

View 2 Replies View Related

Adding 2 Columns In A Dataset As A Single Column In Datagrid

Nov 9, 2006

hi,
i am having 2 columns in a table in a dataset.
i want to add those two columns and bind the resultant total as a single column to the datagrid.
is it possible.
if yes, how o acheive this?
please help me.
thanks in advance.
muppidi.

View 1 Replies View Related

Adding DataSet As DataSource To Report Published On Report Server From ClientSide

Jan 15, 2007

Hi

I am Creating Click Once Windows Application with Reporting Services 2005.I have created Report and Published on Report Server.In my windows application I am successfully able to view my published report through report viewer control.

Now in my application I am getting a dataset from my custom webservice. I want this dataset data to be added to my report as datasource at runtime on Client Side ,as my report is on Report Server.

waiting for help!!

Thanks in Advance

Pankaj

View 8 Replies View Related

Multi-value Parameter In Master Report Passing To Single Param Sub-report In A List.

Aug 20, 2007

Here's tricky one.

I have a fairly complex report that was given to me that was hard coded for single parameters. There is a dropdown for each market (created from a query in SSRS). The users have to run for each market each week.

Is there a way to use this report as a Sub-report inside a list of a master report and then use a mult-value parameter?

I want this multi-value parameter to build the values for the list and then run the "sub-report" for each value.

Essentially, I want to create a for each loop.

Any ideas?

View 4 Replies View Related

Excel Transformation Adding Single Quote To Beginning Of Strings

Jun 28, 2007

I have a ssis package created in VS2005 that transforms a SQL query result into an excel spreadsheet. The DataFlow uses a DataReaderSource to query the data and an ExcelDestination to transform the data. The problem is that in the resulting spreadsheet any columns containing string data have a single quote inserted in front of the data. So a string like [My data] becomes ['My data]. When I preview it in the Excel Destination Editor it looks right (without the single quote). What is happening here, is it a bug or does something need to be configured. I checked all the properties that I could find. This is working nice, if I could only overcome this problem.

View 1 Replies View Related

DB Design :: More Than One Table Primary Key Adding In Single Foreign Key Column

Nov 6, 2015

I have come up with one scenarios where I have three table like Product, Services and Subscription.  I have to create one table say Bundle where I can have some of the product id , service id and Subscription id ,  i.e. a bundle may contains sum prduct , services and subscription . How I can design these relations ?

View 3 Replies View Related

Newbie Question: Adding A Single Value To A List In A Stored Procedure

Apr 20, 2006

I have two tables. UserIds is a collection of users, with UserId as the primary key. Contacts simply maps pairs of users. Think of it like IM, where one user can have multiple contacts.


UserIds
----------
UserId - int, primary key
Username etc

Contacts
-------------
UserId - int, the UserId of the user who has the contact
ContactUserId - int, the UserId of the contact

I also have a stored procedure named GetConnectedUserIds that returns all the contacts of a given user. It takes a single parameter, @UserId, the UserId of the user whose contacts I want to get. That's pretty simple:


SELECT ContactUserId FROM Contacts WHERE UserId=@UserId.

Now here's where I get over my head. I actually want that stored procedure to return the user's contacts AND the user's own ID. I want the SELECT statement above, but tack on @UserId to the end of it.

How do I do that?

Thanks in advance for any help. Feel free to answer here or to point me to a useful resource.



Nate Hekman

View 5 Replies View Related

Transact SQL :: Adding Database - Single User Mode Freeze

Oct 5, 2015

I would like to add database to single user mode to enable broker. So, i have tried this:

ALTER DATABASE myDb SET SINGLE_USER WITH ROLLBACK IMMEDIATE
ALTER DATABASE myDb SET ENABLE_BROKER
ALTER DATABASE myDb SET MULTI_USER

But the query works more than half an hour then i have stopped it. i guess it has infinite loop, I get also many of this messages:

Nonqualified transactions are being rolled back. Estimated rollback completion: 0%.

There is no other transaction also there is no other user connections. So, what happens?

View 5 Replies View Related

I Need This To Be Done Using Only Single Stored Procedure For Binding Field Value To DropDownBox And For Adding Income. Plz Tell Me How To Do This?

May 22, 2008

 
My task is to add income by taking few variables from webpage. I had take User ID(From database), Field value by selecting it from DropDownBox( Which value is once again taken from database), Income Description, Date, Amount . I had completed this task successfully by binding DropDownBox to database by query string and added income using stored procedure as below.
 
  I need this to be done using only single Stored Procedure for binding Field Value to DropDownBox  and for adding income. Plz tell me how to do this?
ASPX.CS file
protected void Page_Load(object sender, EventArgs e)
    {
        SqlConnection con = null;
       
            con = DataBaseConnection.GetConnection();
            DataSet ds = new DataSet();
            SqlDataAdapter da = new SqlDataAdapter("select PA_IFName from PA_IncomeFields where PA_UID=@PA_UID", con);
            da.SelectCommand.Parameters.Add("@PA_UID", SqlDbType.Int).Value = (int)Session["PA_UID"];
            da.Fill(ds);
          
            IFDdl.DataSource = ds;
        IFDdl.DataTextField= ds.Tables[0].Columns[0].ToString();
        IFDdl.DataValueField = ds.Tables[0].Columns[0].ToString();
            IFDdl.DataBind();
       
       
    }
    protected void IncAddBtn_Click(object sender, EventArgs e)
    {
        SqlConnection con = null;
        try
        {
            con = DataBaseConnection.GetConnection();
 
            SqlCommand cmd = new SqlCommand("AddIncome", con);
            cmd.CommandType = CommandType.StoredProcedure;
            //SqlCommand cmd = new SqlCommand("",con);
            //cmd.CommandText = "insert into PA_Income values(@PA_UID,@PA_IFName,@PA_IDesc,@PA_IDate,@PA_IAmt)";
           
            cmd.Parameters.Add("PA_UID", SqlDbType.Int).Value = (int)Session["PA_UID"];
            cmd.Parameters.Add("@PA_IFName", SqlDbType.VarChar, 10).Value = IFDdl.SelectedValue;
            cmd.Parameters.Add("@PA_IDesc", SqlDbType.VarChar, 50).Value = IFDescTB.Text;
            cmd.Parameters.Add("@PA_IDate", SqlDbType.DateTime).Value = Convert.ToDateTime(IFDateTB.Text);
            cmd.Parameters.Add("@PA_IAmt", SqlDbType.Money).Value = Convert.ToDecimal(IFAmtTB.Text);
 
            cmd.ExecuteNonQuery();
            IFLabelMsg.Text = "Income Added Successfully!";
 
        } // end of try
        catch (Exception ex)
        {
            IFLabelMsg.Text = "Error : " + ex.Message;
        }
        finally
        {
            con.Close();
        }
    }
 
Stored Procedure
ALTER PROCEDURE dbo.AddIncome (@PA_UID int,@PA_IFName varchar(10),@PA_IDesc varchar(50),@PA_IDate datetime,@PA_IAmt money)
      /*
      (
      @parameter1 int = 5,
      @parameter2 datatype OUTPUT
      )
      */
AS
 
 
/*SET NOCOUNT ON*/
 
     
      insert into PA_Income values(@PA_UID,@PA_IFName,@PA_IDesc,@PA_IDate,@PA_IAmt)
 
ASPX File
<%@ Page Language="C#" MasterPageFile="~/MasterPage.master" AutoEventWireup="true" CodeFile="AddIncome.aspx.cs" Inherits="AddIncome" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
 
<h2>
        Add Income </h2>
    <br />
        <table>
            <tr>
                <td>
                    Select Income Field</td>
                <td>
                    <asp:DropDownList ID="IFDdl" runat="server" Width="247px"   >
                    </asp:DropDownList>
                    <a href="addincomefield.aspx">Add Income Field</a>
                   
                    </td>
                   
            </tr>
            <tr>
                <td>
                    Enter Income Amount
                </td>
                <td>
                    <asp:TextBox ID="IFAmtTB" runat="server" Width="96px"></asp:TextBox>
                    Date &nbsp;<asp:TextBox ID="IFDateTB" runat="server" Width="93px"></asp:TextBox>(MM/DD/YY)</td>
            </tr>
            <tr>
                <td>
                    Enter Income Description
                </td>
                <td>
                    <asp:TextBox ID="IFDescTB" runat="server" Width="239px"></asp:TextBox></td>
            </tr>
        </table>
   <br />
    <asp:Button ID="IncAddBtn" runat="server"  Text="Add Income" OnClick="IncAddBtn_Click"  /><br />
    <br />
    <asp:Label ID="IFLabelMsg" runat="server"></asp:Label>
</asp:Content>
 
 
 
  I need this to be done using only single Stored Procedure for binding Field Value to DropDownBox  and for adding income. Plz tell me how to do this?
 

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved