Hi,
I want to add a parameter to the following SQL-sequence. ActivityGroup is the table and I want to select the current activityGroupID in place of XXXXX. Do I need to put this in a stored procedure?
select * from ActivityGroup where cpgActivityGroupID = XXXXX and cgpRegistredFrom > getDate() and cgpRegistredTo < getDate()";
Thanks in advance!
I'll go to a dataset, open up the query designer, add a new parameter, then refresh the fields, but the parameter won't be added as a report parameter. If I go to the dataset properties under the list of parameters, the value in the dropdown will be blank. However, sometimes this will automatically add.
Is this a bug in Visual Studio? How do I get around this?
I have a details view with several parameters set up in my asp.net 2.0 code, I want to add a parameter before the sql parameter is executed. I need to use the find control of the details view because I am using items/edit item templates in my details view control. I tried this(see below) as well as the detailsview item command event args to no avail. It doesn't see the other parameters that have already been declared in my asp.net code. I don't want to have to declare all my varibles that are already in my asp.net code. I just want to add another parameter. Sub InsertNew(ByVal sender As Object, ByVal e As DetailsViewInsertEventArgs) _ Handles dvEvents.ItemInserting Dim dvr As DetailsViewRow For Each dvr In dvEvents.Rows Dim CatIDup As Integer = CType(dvr.FindControl("ddlCat"), DropDownList).SelectedValue sdsevents.InsertParameters.Add("evCatID", CatIDup)sdsevents.Insert()
View 4 Replies View Related
Is there any possibility to add global parameters to the reports? I'd like to add my parameter that would be avilable on the all reports on the reports server and use it in actions.
Thank you!
Hello,
How do I add a non obligatory parameter to a stored procedure? Suppose I want the parameter @mbrTelephoneJob to be non obligatory?
ALTER PROCEDURE [dbo].[insert_member]
(
@mbrFirstName nvarchar(30),
@mbrLastName nvarchar(30),
@mbrStreetAddress nvarchar(30),
@mbrPostalAddress nvarchar(30),
@mbrTelephoneHome nvarchar(30),
@mbrTelephoneJob nvarchar(30),
@mbrEmail nvarchar(40),
)
AS
INSERT INTO dbo.member(mbrFirstName, mbrLastName, mbrStreetAddress, mbrPostalAddress, mbrTelephoneHome, mbrTelephoneJob, mbrEmail)
VALUES (@mbrFirstName, @mbrLastName, @mbrStreetAddress, @mbrPostalAddress, @mbrTelephoneHome, @mbrTelephoneJob, @mbrEmail)
Each time we add a new parameter to a subreport and we link the main report's fields to be the value's to the parameters for the subreport, we get an error message stating that the parameter for the subreport has not been specified. If we physically REBOOT the computer and then reload the project, the error seems to clear up.
Is this a bug in Reporting Services or is there some other explaination.
Thanks for the information.
hello
i have a parameter which can have multiple values
and in the report body, on the top i want to add a textbox which has the report parameter value (or values)
it works when i have parameter with a unique value but for a multiple values parameter it doesn't work
i wrote that
and it doesn't work
Code Snippet
=Parameters!ActivityClient.Value
thanks in advance for help
I have 3 specific where searches in where command I want to add a defined text to each specific where query if that makes sense. highlighted in red, how do I do this? going to add status after and then do pivot table afterwards.
SELECT
POHEAD.DocumentNo
,POHEAD.CreditorCode
,POHEAD.InternalReference
,POHEAD.QuantityOrdered
,POHEAD.Z_ArrivalDate
[Code] .....
Hi,I'm trying to create a page where a user can search the database according to some criteria and get back the result in the form of a GridView. Also, the user has the option of saving the criteria to another table in the database by assigning it a name so that it can be retrieved easily in the future.I have the search and display part working, however, saving the criteria to the database is giving problems for some reason.Given below is my stored procedure to add the info to the db. SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[AddToReport]
(@ReportName varchar(100), @ProjID varchar(300), @DeptCode varchar(20), @ProjType varchar(20), @ProjectTitle varchar(300),
@ProjectManagerID int, @DateRequested datetime, @DueDate datetime, @ProjectStatusID int)
AS
SET NOCOUNT ON
DECLARE @Dept varchar(50)
DECLARE @err int
BEGIN TRANSACTION
IF @ReportName IS NULL
BEGIN
RETURN -1
END
ELSE
BEGIN
IF @DeptCode IS NOT NULL
BEGIN
SET @Dept = REPLACE(CONVERT(char,@DeptCode),'.','')
END
SET @err = @@ERROR
INSERT INTO dbo.tbl_Report (ReportName, ProjID, DeptCode, ProjType, ProjectTitle, ProjectManagerID, DateRequested, DueDate, ProjectStatusID)
VALUES (@ReportName, @ProjID, @Dept, @ProjType, @ProjectTitle, @ProjectManagerID, @DateRequested, @DueDate, @ProjectStatusID);
IF @err<>0
BEGIN
ROLLBACK TRANSACTION
RETURN @err
END
END
COMMIT TRANSACTION Given below is the relevant codebehind. This is how the values are initialized: Dim newManager As New ListItem
newManager.Text = "Choose a Manager"
newManager.Value = 0
projectManagerDDL.Items.Add(newManager)
Dim newDept As New ListItem
newDept.Text = "Choose a Department"
newDept.Value = ""
deptCodeDDL.Items.Add(newDept)
Dim newID As New ListItem
newID.Text = "Choose a Project"
newID.Value = ""
projIDDDL.Items.Add(newID)
Dim newStatus As New ListItem
newStatus.Text = "Choose a Status"
newStatus.Value = 0
projectStatusDDL.Items.Add(newStatus)
Dim newDateRequestedMonth As New ListItem
newDateRequestedMonth.Text = "Month"
newDateRequestedMonth.Value = 0
dateRequestedMonthDDL.Items.Add(newDateRequestedMonth)
Dim newDateRequestedDay As New ListItem
newDateRequestedDay.Text = "Day"
newDateRequestedDay.Value = 0
dateRequestedDayDDL.Items.Add(newDateRequestedDay)
Dim newDateRequestedYear As New ListItem
newDateRequestedYear.Text = "Year"
newDateRequestedYear.Value = 0
dateRequestedYearDDL.Items.Add(newDateRequestedYear)
Dim newDueDateMonth As New ListItem
newDueDateMonth.Text = "Month"
newDueDateMonth.Value = 0
dueDateMonthDDL.Items.Add(newDueDateMonth)
Dim newDueDateDay As New ListItem
newDueDateDay.Text = "Day"
newDueDateDay.Value = 0
dueDateDayDDL.Items.Add(newDueDateDay)
Dim newDueDateYear As New ListItem
newDueDateYear.Text = "Year"
newDueDateYear.Value = 0
dueDateYearDDL.Items.Add(newDueDateYear) This is the submit code: Protected Sub saveButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim connString As String
Dim con As SqlConnection
Try
connString = System.Web.Configuration.WebConfigurationManager.ConnectionStrings("ConnectionString1").ConnectionString
con = New SqlConnection(connString)
Dim cmd As SqlCommand = New SqlCommand()
cmd.Connection = con
If (([String].IsNullOrEmpty(reportNameTextBox.Text) = False) Or reportNameTextBox.Text <> "Enter Report Name") Then
cmd.Parameters.Add("ReportName", SqlDbType.VarChar, 300).Value = reportNameTextBox.Text
End If
If ([String].IsNullOrEmpty(projIDDDL.SelectedItem.Value)) = False Then
cmd.Parameters.Add("ProjID", SqlDbType.VarChar, 30).Value = projIDDDL.SelectedItem.Value
End If
If ([String].IsNullOrEmpty(deptCodeDDL.SelectedItem.Value)) = False Then
cmd.Parameters.Add("DeptCode", SqlDbType.VarChar, 20).Value = deptCodeDDL.SelectedItem.Value
End If
If (typeRBL.SelectedItem.Value <> "All") Then
cmd.Parameters.Add("ProjType", SqlDbType.VarChar, 20).Value = typeRBL.SelectedItem.Value
End If
If ([String].IsNullOrEmpty(projectTitleTextBox.Text)) = False Then
cmd.Parameters.Add("ProjectTitle", SqlDbType.VarChar, 300).Value = projectTitleTextBox.Text
End If
If CInt(projectManagerDDL.SelectedItem.Value) <> 0 Then
cmd.Parameters.Add("ProjectManagerID", SqlDbType.Int).Value = CInt(projectManagerDDL.SelectedItem.Value)
End If
If (dateRequestedDayDDL.SelectedItem.Value = 0 Or dateRequestedMonthDDL.SelectedItem.Value = 0 Or dateRequestedYearDDL.SelectedItem.Value = 0) Then
Dim dateRequested As New DateTime
dateRequested = Nothing
Else
Dim dateRequested As New DateTime(dateRequestedYearDDL.SelectedValue, dateRequestedMonthDDL.SelectedValue, dateRequestedDayDDL.SelectedValue)
If (dateRequested) <> Nothing Then
cmd.Parameters.Add("DateRequested", SqlDbType.DateTime).Value = dateRequested
End If
End If
If (dueDateDayDDL.SelectedItem.Value = 0 Or dueDateMonthDDL.SelectedItem.Value = 0 Or dueDateYearDDL.SelectedItem.Value = 0) Then
Dim dueDate As New DateTime
dueDate = Nothing
Else
Dim dueDate As New DateTime(dueDateYearDDL.SelectedValue, dueDateMonthDDL.SelectedValue, dueDateDayDDL.SelectedValue)
If (dueDate) <> Nothing Then
cmd.Parameters.Add("DueDate", SqlDbType.DateTime).Value = dueDate
End If
End If
If (projectStatusDDL.SelectedItem.Value) <> 0 Then
cmd.Parameters.Add("ProjectStatusID", SqlDbType.Int).Value = CInt(projectStatusDDL.SelectedItem.Value)
End If
cmd.CommandText = "dbo.AddToReport"
cmd.CommandType = CommandType.StoredProcedure
Try
con.Open()
cmd.ExecuteNonQuery()
Response.Write("Report Saved")
Catch ex As Exception
Response.Write(ex)
Finally
con.Close()
con.Dispose()
End Try
Catch ex As ApplicationException
Response.Write("Could not load the database")
End Try
End Sub The only absolute requirement when saving to the table is the ReportName. All the other criteria can be NULL. If I don't select and values and try to save the values, I get an error:System.Data.SqlClient.SqlException: Procedure or function 'AddToReport' expects
parameter '@ProjID', which was not supplied. at
System.Data.SqlClient.SqlConnection.OnError... etc If I choose the ProjID (thus giving it a value), I get the following error:System.Data.SqlClient.SqlException: Procedure or function 'AddToReport' expects
parameter '@DeptCode', which was not supplied. at
System.Data.SqlClient.SqlConnection.OnError... etc and so forth. I'm guessing it's a problem of NULLs somewhere, but I'm not sure. Thanks.
Hi all,
hope anyone can help me on this one.
I have a parameterized report based on a MDX query (so no drag and drop of filters and fields).
Now i have to ad a parameter. So i open the query parameter dialog box and i ad my parameter.
when i click ok , my dataset becomes empty , resulting in an error on my report saying that the fields on the report cannot by found and should be in the scope of the dataset.
Has anyone experienced this problem before, or am i forgetting something here?
thanks in advance
Steven J
First of all; My Oracle publication works fine when I don't explicit specify the shema_option parameter for the articles I'm adding to the publication. The reason why I then want to explicit specify the parameter is as following.
I'm developing a replication solution to get data from our production server (Oracle) to our Data Warehouse (SQL Server). The SQL Server (and the Data Warehouse code) uses the SQL_Latin1_General_CP1_CI_AS collation. When I don't explicit specify the schema_option, the nvarchar columns of the replicated tables are created using the SQL_Latin1_General_CP1_CS_AS collation and this results in some comparison errors, when for instance a select statement is trying to compare two nvarchar strings using different collations.
I've tried to specify the schema_option parameter as "@schema_option = 0x80" (Replicates primary key constraints.) to avoid the use of the SQL_Latin1_General_CP1_CS_AS collation when creating the destination tables - I'm not sure it's enough? No matter what, I'm getting an error when I'm doing it (see below).
Message
2006-07-13 12:00:15.529 Applied script 'ITEMTRANSLATION_2.sch'
2006-07-13 12:00:15.544 Bulk copying data into table 'ITEMTRANSLATION'
2006-07-13 12:00:15.544 Agent message code 20037. The process could not bulk copy into table '"ITEMTRANSLATION"'.
2006-07-13 12:00:15.591 Category:NULL
Source: Microsoft SQL Native Client
Number: 208
Message: Invalid object name 'ITEMTRANSLATION'.
2006-07-13 12:00:15.591 Category:NULL
Source:
Number: 20253
The questions are now whether I actually have a schema_option alternative for Oracle Publishing? If so, what is the solution, and eventually how can I avoid the error stated above?
If I'm not able to avoid the article columns getting created with the "wrong" collation, is there then any other obviously solution to the problem?
Thanks!
Best regards,
JB
Hi, I need to make a query that, according to the value of a field, returns an specified value.
ie:
TABLE:
Col1
1
0
I need to make a query like:
SELECT (????) FROM TABLE
and if Col1=1 returns 'Assigned' and if Col2=0 it returns 'Unassigned'
So the result from the query for the data above is:
Assigned
Unassigned
Thankx
Hello forum. I address you in order to help me for create a little sentence.
the problem is as:
I have a table "STAMPING" that save data as:
TIMESTAMP------------USER_ID-----TERMINAL_ID----CHIP_ID
19/05/1982 15:30:31 1 1 1
19/05/1982 15:31:29 1 1 1
19/05/1982 15:31:55 1 1 1
19/05/1982 16:25:46 1 1 1
19/05/1982 16:26:23 1 1 1
19/05/1982 16:26:34 1 1 1
19/05/1982 22:23:56 1 1 1
19/05/1982 22:24:23 1 1 1
and I would need to filter them as-->
TIMESTAMP------------USER_ID-----TERMINAL_ID----CHIP_ID
19/05/1982 15:30:31 1 1 1
19/05/1982 15:31:29 1 1 1
19/05/1982 15:31:55 1 1 1
19/05/1982 16:25:46 1 1 1
19/05/1982 16:26:23 1 1 1
19/05/1982 16:26:34 1 1 1
19/05/1982 22:23:56 1 1 1
19/05/1982 22:24:23 1 1 1
20/05/1982 06:10:29 1 1 1
20/05/1982 06:11:51 1 1 1
TIMESTAMP------------USER_ID-----TERMINAL_ID----CHIP_ID
19/05/1982 15:30:31 1 1 1 <<<----
less (difference) --> 00:56:03
19/05/1982 16:26:34 1 1 1 <<<----
19/05/1982 22:24:23 1 1 1 <<<----
less (difference) --> 07:45:00(+/-)
20/05/1982 06:11:51 1 1 1 <<<----
So, I need to delete the "timestamps" the an user has done, which the difference between one stamping and the following one is less than 2 minutes for the inputs for entrances and I need to remove it when the "stampings" which the difference between an one stamping and the previous one is less than 2 minutes for exits.
Can you help me please?
I will appreciate a lot your help.
CNUECOD is primary key in VTA020SAP2 table
TIA
Violation of PRIMARY KEY constraint 'PK_VTA020SAP2'. Cannot insert duplicate key in object 'VTA020SAP2'.
The statement has been terminated.
INSERT INTO VTA020SAP2 SELECT VTA020SAP1.*, NULL as xCLIPRO, NULL AS xPAIS, NULL AS xCONFREI, NULL AS xCONCPER,
NULL AS xMONEDA, NULL AS xFAX, NULL AS xTIPEXP, NULL AS xCASILLA, NULL AS xDIAENTR, NULL AS xPUNVEN,
NULL AS xCIUDAD, NULL AS xREGION, NULL AS xCONDIC, NULL AS xINSPAG, NULL AS xCUMPLE,
NULL AS xPERVIS, NULL AS ESTADO FROM dbo.VTA020SAP1
INNER JOIN VTA020
ON VTA020SAP1.CNRCLI = VTA020.CNRCLI
AND VTA020SAP1.CNRCLI IN (SELECT MAX(VTA020SAP1.CNRCLI) FROM VTA020SAP1
GROUP BY VTA020SAP1.CNUECOD)
AND (not EXISTS
(SELECT VTA020SAP2.* FROM dbo.VTA020SAP2
INNER JOIN VTA020SAP1 ON VTA020SAP1.CNUECOD = VTA020SAP2.CNUECOD
WHERE dbo.VTA020SAP2.CNUECOD = dbo.VTA020SAP1.CNUECOD))
If I want to change the value of a special bit in a column, how to wirte the SQL sentence in sqlserver.
I mean in a column, the value is 'test', then how to change the 's' to 'e' or any other value by just one SQL sentence.
Thanks.
Hello !!
I'm using the sentence NOLOCK for selects, but I have many sentences, Is there any way to set a parameter in the DBMS, to use NOLOCK parameter by default ???? I mean, I don't like to lock any table for selects.
Is It possible ???? How to do It (step by step) ?
Thanks !!
Set @mSQL = 'SELECT Max([AccountID] + [ItemID] + [StorehouseID] + [BINID] + [LotItemID] + Convert(varchar(10),[BalDate],111)) AS [KEY],
AccountID, ItemID, StorehouseID, BINID, LotItemID INTO [xIV_tblStockSumLastDate' + ']
FROM IV_tblIVMaster
WHERE (BalDate<= 'Exec(@mSQL + '''' + @mtxtDate + '''' + ')
GROUP BY ItemID, AccountID, StorehouseID, BINID, LotItemID')
Hi, all friends. I'm using SQL-SERVER 2000.I have a table like this:NIF Name----------------------------------------A-1234 Company1B-123-B1 Company2C-4568 Company4D-453-DF Company5I want delete the symbol "-" in the row "NIF". eg. A-1234 change toA1234, D-453-DF to D453DFSo how can I write the sentence . Should I use the Stored Procedure?Thank you very much!!Simon
View 2 Replies View Relatedi have insert/update SQL sentence, but sometimes there are empty values because there not required in the database so sometimes the sql sentence look this way:
INSERT INTO EquipmentAndPlace (EquipmentID,EquipmentEmdaNo,EquipmentPlace,EquipmentIDForRecognize, EquipmentRemarks,EquipmentLastChecked) VALUES ('3','','2','1','','12/1')
with empty values, but then it doent update in the dataBase-only if all the values appear-
what the solution of it?
Thanks
I have two tables. A table called users (content speaks by it self) and a table called groups.
Since i want every user to be able to be a member of several groups and, of course, a group to have several users i have made a junction table called jt.
The junction table contains userId's and groupId's according to the user-group bindings. The primary key(identity) in the junction table is a int named jtId.
Now i want to take out all posts from the junctiontable and the corrresponding userName (s) from the users-table and the corresponding groupName from the groups-table.
Can somebody please help me to make a SQL command that will di that for me. I have tried with INNER JOIN and several SELECTS in the same command.
Thanks in advance, Greetings from Esben
Hello,
I would like to know how can I change a "not in" clause with the same results in a SQL sentence in order to improve the performance of my SQL sentence.
I am working with SQL Server 2005
Thanks,
jmota
Hi,
I have a project in which I have about 20,000 records in sql database table.
What I would like to do is generate a query that lists all the unique words in a particular field acros the entire table so as to generate a glossary of words.
if we had a table that looked like
ID Description
001 This is the first record
002 This is the second record
003 This is not the first record
and the query was run on the description field, then the result I would like to see is
This
is
the
first
second
not
I hope this makes sense. Any help is appreciated.
Hi All,
I want to give the users the ability to highlight words in sentences on the page in different colors.
Please see link below for an example(watch out for URL wrapping):
http://64.233.161.104/search?q=cache:fKHSRIxERbUJ:www.codeguru.com/columns/DotNet/article.php/c6603/+XML+serialization+in+.net&hl=en
My MASTER table that contains text is very simple:
TEXT_ID INT
TEXT varchar
I was thinking of something like creating another table to keep track of selection criteria:
USER_NAME varchar // keeps track of which user made the selection
TEXT_ID INT // points to the text id in the MASTER table
START_POS INT // start position of the selection
END_POS INT // end position of the selection
COLOR INT // color of the selection
The thing I don't like about this method, is if user(s) have many words higlighted in the sentences, this table may get very large.
I also thought of maybe combining START_POS, END_POS & COLOR into comma delimited entries:
EX: 1:5:240, 25:30:125 // START_POS:END_POS:COLOR
The thing I don't like about this method, the parsing calculations may take a while to execute.
My goal is to stream as much text data as possible and make it as fast as possible. How does Google or any one else do it?
P.S. Having a copy of a MASTER table with HTML tags in TEXT field is not an option.
Thanks,
Vlad
I have to parse a sentence into separate words. This has to be done in a Stored Proc.
If the sentence is: "The sun is rising". Then I want to store the words "The" "sun" "is" "rising" into 4 separate variables. (The separator is a space).
Has someone already written something like this before? I do not want to re-invent the wheel.
Thankx.
KP
CREATE TABLE [dbo].[instructions](
[site_no] [int] NOT NULL,
[instructions] [text] NULL
)
Select top 3 * from instructions
Output
Site_no Instructions
20 Request PIN#510 then proceed
21 Request PIN#987 if wrong request name
22 Request PIN#688 allowed to use only numbers
All text instructions start with “Request PIN#XXX” also after that the text are different for every site_no
I need insert in all site_no rows and after the “Request PIN#XXX” the text “and codeword” keeping the current rest of text
How can I set e REPLACE CAST sentence using something LIKE PIN%%%%
To get these type of results
site_no instructions
----------- ----------------------------------------------------
20 Request PIN#510 and codeword then proceed
21 Request PIN#987 and codeword if wrong request name
22 Request PIN#688 and codeword allowed to use only numbers
the talbe row like this:
ID Name Scoe 11 Tome 20 12 Jack 30 11 Tome 40 12 Jack 10 13 John 10
My query command like this:
Select T1.Id,T1.Name,T2.mathfrom st T1right join(Select Id as Id2,Sum(Math) as Math from St group by id) T2on T1.id=t2.id2where t1.id = t2.id2
While the reuslt is :
Id Name Score
11 Tom 60
11 Tom 60
12 Jake 40
12 Jack 40
13 John 10
I am wonder :the T1 gives a table with six rows, the T2 gives a table with three rows, and I use RIGHT JOIN to connect the two table,the result should be a table with only three rows.I tried INNER JOIN, the result is same.
but why ? please help me !
Is it possible to pass entire where sentence to a store procedure?From app, I'll generate a where sentence like below:
where orderID = '123' and orderCidy='London'
I created a store procedure like below but got an error said that An expression of non-boolean type specified in a context where a condition is expected, near 'END'
CREATE PROCEDURE getorder
@mywhere VARCHAR(100)
AS
BEGIN
SET NOCOUNT ON;
select * from order @mywhere
END
Hi everyone!I am working with Delphi v7 and MS SQLServer.I am trying to insert data in a table with a SQL sentence. Some of thefields of my table are type char or varchar, and they can have nullvalues.What do i have to write in the SQL sentence to insert a null value inthose fields?I tried with '', an empty String, but it doesnt work, the tablesstores an empty String (logical :-)).In the SQLServer GUI you have to press CTRL + 0 to insert a NULLvalue, but how can i tell this to the SQLServer through a SQLSentence?Well, thank you very much.
View 2 Replies View RelatedI was recently told SSRS does not support the ability to underline a portion of text in a sentence. Does anyone know if this is true? Couldn't "text decoration" "underline" and "span" be used to underline the web address in the sample sentence below?
"Please visit our website at: www.abc.com"
Thanks
I have a illegal keyword table name as "Illegal_keyword_Master" where near about 2000 illegal keyword are stored... Now I have a big Sentence(bunch of words)...
If any illegal is keywords is found from "Illegal_keyword_Master" table in that sentence then the sentence is "banned" otherwise the sentence is "OK"....
If I have a Select statement like this in my C# code:
Select * From foods Where foodgroup In (@foodgroup)
And I want @foodgroup to have these values ... "meat", "dairy", fruit", what is the correct way to add the parameter?
I tried
meat, dairy, fruit
'meat', 'dairy', 'fruit'
but neither worked. Is this possible?
I have an very long ntext field, made up of many sentences that I append a full stop to every one, I also strip out any line breaks within the text. However I get this error, when I look it up it comes up with "Failed to locate the ending boundary of a sentence."
View 0 Replies View RelatedIs there any way or option to get the all columns of dataset added to table when we add a table in data region. It will take lot of time to add one by one and also there are chances to add one column ore than once.
View 7 Replies View Related