Adding Parameters During .updating Event Handler
May 29, 2007
Not receiving any errors. The update runs perfectly on all fields, except for the added parameter during the sub. I need to change the hidden field's value after parsing out several fields in the form and generating a logfile entry of sorts. This needs to happen after all the form fields are updated, but before the update is executed.
aspx: (relevant parts only...)
<asp:SqlDataSource ID="TicketDetails" runat="server" ConnectionString="<%$ ConnectionStrings:myConnectionString %>"
UpdateCommand="UPDATE Tickets SET TicketSuspense = @TicketSuspense, TicketPriority = @TicketPriority, TicketLastUpdated = CURRENT_TIMESTAMP, TicketStatus = 'Assigned', TicketTechnicianNotes = @TicketTechnicianNotes WHERE (TicketID = @TicketID)">
<UpdateParameters>
<asp:Parameter Name="TicketPriority" Type="String" />
<asp:Parameter Name="TicketSuspense" Type="DateTime" />
<asp:Parameter Name="TicketID" Type="Int32" />
</UpdateParameters>
</asp:SqlDataSource>
codebehind: (once again, the relevant parts only)
Protected Sub TicketDetails_Updating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceCommandEventArgs) Handles TicketDetails.Updating
TicketTechnicianNotesHiddenField.Value = "some text..." & TicketTechnicianNotesHiddenField.Value
TicketDetails.UpdateParameters.Add(New Parameter("TicketTechnicianNotes", TypeCode.String, TicketTechnicianNotesHiddenField.Value))
End Sub
Thanks,
- Brad
View 3 Replies
ADVERTISEMENT
Feb 7, 2007
Hi, I am trying to Log my activities when OnError event handler fires
I have defined few tasks in OnError event handler section so when there is a failer on the main package my OnError task runs ( which it work fine)
now I am trying to add Dts.LOG from inside OnError evend handler task, and it seems like SSIS doens't give that function.
I can use dts.log outside on the main package but not inside OnError section! any ideas
Thanks
View 5 Replies
View Related
Apr 8, 2008
HI, I'm implementing a custom error loggin using SSIS event handler, I succesfully catch the error and now I trying to retreave the value of this variables: System::ErrorCode and System::ErrorDescription.
The problem is that only the System::ErrorDescription retreave a value, the variable System::ErrorCode cames empty.
Is that correct?
Thanks.
View 1 Replies
View Related
Oct 19, 2006
Is the Onerror Event Handler from the tabbed window in the IDE the same as the red arrow paths that can be used in the control flows and Data Flows?
If yes, what and where is the best practice to use?
If not, can you elaborate?
Thanks,
View 4 Replies
View Related
Apr 28, 2006
I'm trying to log the information spit out by SSIS but only the rowcount part, e.g. "component xyz wrote 1000 rows", im currently using a execute sql task but that will log all information, any simple efficient way i can filter out that rows written line and log that into a sql server table?
thanks
View 4 Replies
View Related
Jan 8, 2007
I am current using Event Handlers in an SSIS package, but when adding a new EventHandler type eg. OnPreExecute, to an executable within the package, I am unable to see this new EventHandler defined in the hierarchical listing on the left hand combo box (named Executables).
Can't seem to find a Refresh option anywhere. I've only been able to see these newly created EventHandlers in the hierarchical listing by closing and re-opening the package.
Is this a 'feature' or am I missing a Refresh option somewhere.
Thanks.
View 6 Replies
View Related
Sep 13, 2007
Dear all,
Previously I've posted about precedence error that didn't work and now it works, thanks to John Welch for his support. But when I tried to use event handler, it won't work. When error occured it didn't redirect to the OnError event handler. And then I built another package but with Data Flow task only, put a simple Script task inside OnError event handler and strange..it worked fine. There is no differences between my first Data Flow task and the last Data Flow task, totally the same process. I've captured both execution result. This is the first failure Data Flow task and the last success Data Flow Task (failure and success herein means that OnError work or not)
And then I did some testing in my last package contains a success Data Flow task. I put a new Data Flow task by copy from the previous one, execute it and OnError won't work again. Then I delete it, execute the previous one and OnError worked fine. I really don't understand why by adding a new Data Flow Task then OnError event handler won't work ?
Any help would be appreciate. Thanks in advance.
Best regards,
Hery
View 7 Replies
View Related
May 22, 2008
will a package fail if an error occurs in a task inside an event handler?
View 3 Replies
View Related
Mar 21, 2007
SSIS Checkpoint and restart event handling.
I am using checkpoints in my SSIS packages which determines the step at which the package failed the last time and restart at that step.
But i need some other task also to kickoff only during restart? There is not an OnRestart handler as OnError in SSIS.
How can i do this ?
View 1 Replies
View Related
Feb 10, 2006
I have a task configured on the post execute event handler of a package expecting this task to be executed only once after the completion of all the other tasks in the package. But I found the task configured on the post execute event of the package getting executed as many times as the number of tasks in the package + 1 . Is there any workaround for this problem?
View 1 Replies
View Related
Aug 8, 2006
hi!
I am using a simple Data Flow within a Squence Controller and have added a Event Handler for OnPostExecute which contains a simple insert to a table, but this is not working. My package gets successfully execute but data is not getting inserted in the table used in Event Handler. I have also tried OnError, OnPackageFailer etc... but no results. Please guide.
View 18 Replies
View Related
Jan 11, 2008
Hi
I'm still fairly new to some of SSIS's enhanced funtionalities, one of them being Event handlers. I have tried creating a simple package, that simply contains a SQL Execute task that basically creates a simple table. Now i have then added a OnPostExecute even handler as a test which basically runs a script task that simply shows a msgbox. I have gone to execute the package, however after the completion of the SQL Execute task, nothing happens, the even handler doesnt get fired for some reason, i switch to the even handler page and the script task has not been executed. It is like this for every event handler i have tried, even the OnError event. Could this be a problem with my installation of SSIS or have i done something wrong?
Any help would be greatly appreciated as i have done SSIS training and to create an event handler was never this hard!
Regards
Singstar
View 12 Replies
View Related
Apr 10, 2008
Hi,
I have an SSIS package that populates a field with "DEFAULT" at the start of execution and i have an Execute SQL task in PostExecute EventHandler that executes a stored proc to update the said field to "SUCCESS".
I already created a blank script task to connect to the Execute SQL task and placed in the precedence constraint editor: @[System :: PackageName] == @[System :: SourceName] so that it would execute only when the package completes execution.
My problem is that there are times (probably about 1 out of 50) that the "DEFAULT" value does not get updated. I dont know why this is happening because I expect that this should always be updated since the stored proc is in PostExecute (i suppose successful or even failed execution always does what is in the PostExecute event handler). I don't know why this is happening and it is so hard to replicate.
What do you think?
Thanks!
View 3 Replies
View Related
Feb 12, 2007
Hi,
We want to develop an error handling process that will log the errors into multiple destinations (eventlog, text files or sql database) depending upon a variable set in the package. Also we want that this errror handling process should be initiated by all the tasks in the package on error.
Is this possible? Can the same event handler be called from multiple tasks in the package? Also in the event handler can we call another package which actually does the error handling. This way we have only one place to change our error handling process in case required.
Thanks in advance for your help.
$wapnil
View 4 Replies
View Related
Oct 6, 2004
Is it possible to create an event handler in a VB.net application to run whenever a Stored Procedure is run.
My application has a scheduled task which is created and scheduled by users of the application, whenever this scheduled task is run I would like it to contact the application to kick off a sequence of tasks. I would appreciate if anybody could point me in the right direction.
View 4 Replies
View Related
Feb 12, 2007
Hi,
One of my plan is to develop a custom task compoent to log the errors into the destination provided as paramter to the component. Now how can I restrict the use of this component in the event handler tab only. can something like this be done?
Also extending this a little further, is the below thing possible?
The custom component should expose custom properties which should allow the user to add the destinations for logging the errors. It will be a predefined list (window event log, text file, sql table etc) and the user will be allowed to check what all he/she wants. Then if the user has selected sql table then ask for the oledb connection and the table name, if text file is selected the ask for the path of the file.
Apology if I am asking too many questions around the same thing (error handling). There may be a better way to acheive what I am trying to acheive but then I have no idea about it. Your guidance will be of great help.
Again, Thanks a lot for helping this extra curious guy who wants to try and develope generalized compoenents if possible.
Regards,
$wapnil
View 8 Replies
View Related
Apr 18, 2008
I'm trying to implement a custom log table. To keep the discussion simple, let's say I only have 1 column in this table and all I want to write in it are
"Start" when the package starts
"Error" when it encounters an error
"Finish" when the package finishes. Even if there was an error, I still want to enter "Finish'.
My Control Flow has 3 task objects, 2 Execute SQL Tasks, and 1 Data Flow Task in between them.
The first Execute SQL Task does an insert statement for the Start and the second Execute SQL Task does an insert for the Finish.
To capture any package errors, I also have an Execute SQL Task (to insert "Error") in the Event Handler for OnError. I see that when I cause an error in my package it can raise multiple OnError events, which will envoke my Execute SQL Task multiple times. (This is good because it will allow me to write a line per error event with the error description.)
The problem I have is, how do I write the "Finish" log when I have an error? If I put the insert for the finish in the same Execute SQL Task with the errors, then it will write a "Finish" for every error. But I can't put it anywhere else because if I put it anywhere else, the package never makes it there because it stops at the OnError Event Handler.
Or is there a way for me to tell the package to do the 2nd Execute SQL Task all the time?
Lastly, is there a better way to do this kind of custom logging?
View 28 Replies
View Related
Mar 23, 2007
Has anyone used Checkpoint files in conjunction with the OnError Event Handler ? I'm having a problem getting the OnError event to fire when the SSIS package reruns with the Checkpoint file.
The first run of the package (without a checkpoint file) works fine. The error occurs, the OnError event handler is called, the package stops and the checkpoint file is created.
When the package is restarted is goes to the correct spot (where the error occured) using the checkpoint file, then it throws an error within the For Loop container and does not call the OnError event handler. The OnError event handler is setup on the For Loop container. The ForLoop performs three loops. Each one of these loops creates an error. Not one of these errors within the three loops will trigger the OnError event handler...
Any help would be appreciated.
thanks
View 8 Replies
View Related
Mar 26, 2008
Hi all,
I have a package on which i've applied a package level OnError event handler. The OnError event handler includes a Script Task (that builds up a string of errorCode, errorDescription, MachineName etc...) and a WebService Task that calls a webservice to send an email including the built up string from the script task in the body of the email. This has worked fine in one package where i've applied it but for some reason in a second package the existence of an OnError package level event handler seems to be completed ignored. I'm causing various package object to fail but the OnError handler never fires. I know the obvious answer is find what's different between the two packages but i can't see that any is different (in relation to package level OnError event handling).
Has anyone else come across this? Any suggestions?
Thanks
M.
View 3 Replies
View Related
Oct 5, 2007
Hello,
Upon completion of a package the OnPostExecute event is fired whether the package was successful or not. As expected.
Then, I setup the package to use CheckPoints. I create a Script Task and set the Dts.TaskResult to fail. When the package runs and fails the OnPostExecute event for the package does not fire! If I remove the CheckPoints from the package, the OnPostExecute event fires.
What's even stranger is that if I set the Script Task to succeed, and then rerun the package, the OnPostExecute event still doesn't fire!
Has anyone else noticed this? It seems to me that the OnPostExecute event should fire whenever the package completes as it does when CheckPoints are not used. Why would it not fire when using CheckPoints?
Thank you,
Langston
View 2 Replies
View Related
Aug 25, 2009
I have created an OnError Event Handler to catch an error in the Execute SQL Task in the Control Flow. On error I am simply inserting a few parameters in a DB table using Execute SQL Task. I followed the instructions in: [URL]....
Now when I run this error hanlder task manually it runs fine but when I purposely fail the SQL Task it never fires the error handler. I am not sure why. I checked the DisableEventHandler property and it is set to False.
View 23 Replies
View Related
Oct 6, 2006
My project currently has task which have their own individual event handlers that get called onError (setup event messages). I also have a package level event handler that performs a generic task (sending events to the windows eventviewer) In the package level event handler there is a script task that decides on a boolean variable whether to "Success" or "Failure" to different task. When I fail one task of the main control flow, the task level event handler runs, then the package level event handler runs, and then it also runs again for some unknown reason. The second time it runs it picks up the value of a variable set in the variables window. However, I change this value at runtime to the value from a database. I can't understand why it would run the second time, and if it did run why it would have the value from the variables window and not the value that is set in memory. It's like the event handler runs with the value from memory and then runs and picks the values back out of the variables window, replacing the db values and re-runs.
Maybe the package itself is failing all together and then re-runing the package level event handler?
Any help would be greatly appreciated.
-Chris
View 1 Replies
View Related
Sep 1, 2015
Is there any differene between on-error event handler and precedence constrain failure? I have created a package and if a data flow task(flat file to DB) fails, the file has to be moved to archive folder. How I have accomplished this is Dataflow task->precedence constrain failed(red arrow)->execute process task to move the file to error folder and it worked,The same execute process task( to move the file to error folder) doesnot work  when I move this to on-error event handler. Also, for the same file the on-error event is getting triggered multiple times.
View 4 Replies
View Related
Sep 25, 2015
I have created an event that contains a Data flow tasks with OLE DB source & Excel Destination.
This event is executed/triggered based on an execute SQL task failure in the control flow Sequence container.
However, when I execute the Data Flow task of the Event Handler, it runs successfully but fails when I execute the whole package.
I get the below error message:
[OLE DB Source [21]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. Â The AcquireConnection method call to the connection manager "TK463DW" failed with error code 0xC0202009. Â There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have tried setting the property 'DelayValidation' to 'True' on all the Control Flow and Data Flow tasks on the package and on the Event Handler, but still I could not fix this.Not sure What I am missing.Â
View 4 Replies
View Related
Apr 18, 2007
I have an event:
Private Sub SqlDataSourceIncome_Deleted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceStatusEventArgs) Handles SqlDataSourceIncome.Deleted
Dim command As SqlClient.SqlCommand
command = e.Command
If command.Parameters("@nReturnCode").Value <> 0 Then
DROPDEAD()
End If
That fires from:
<DeleteParameters>
<asp:Parameter Name="nDeletebyId" Type="Int64" />
<asp:Parameter Name="nOtherId" Type="Int64" />
<asp:Parameter Direction="Output" Name="nReturnCode" Type="Int64" />
<asp:Parameter Direction="Output" Name="nReturnId" Type="Int64" />
</DeleteParameters>
End Sub
When I:
GridViewIncome.DeleteRow(GridViewIncome.SelectedRow.RowIndex)
But nReturnCode is ALWAYS NULL... I even did a stored procedure that just:
ALTER PROCEDURE [dbo].[sp_nDeletebyId]
@nReturnCode bigint output,
@nReturnId bigint output AS
SET @nReturnCode = 0
SET @nReturnId = 0
And STILL got nothing but the NULLS... the insert & update stuff works fine, with identical code... it's just the DELETED event that I can't seem to knock. Has anyone seen this before? The above sample stored proc did return 0 when executed one the server...
and, BTW, the row is deleted!
Chip Kigar
View 2 Replies
View Related
Jul 8, 2013
I have a rather complex query (to me at least) that I need to create but I am unsure of where to start. The query requires me to copy existing data into a new row (which will then create a new ID) as well as update all existing records with the newly created id. More specifically, I need to separate the data associated with LocationID 219 from it's parent, CompanyID 992.
Ideally I want to copy the data associated with LocationId 219 and then make a new CompanyId with the copied data (which will also create a new LocationID). Since this new record is no longer going to be associated with CompanyID 992 I will want to remove/delete/drop it from that record.
Finally, and perhaps most difficult of all, I need to update all tables that reference the old ID's together (992 / 219) to reflect the newly created Company ID and Location ID.
View 3 Replies
View Related
Sep 5, 2007
Hi I am using sql server reporting services 2000 and in a report I have more than 20 parameters of data type Boolean. I want another parameter drop down which have "select all" and "clear all" options. When user select €œselect all€? option from the parameter list all 20 parameters value should be false.
I will be very thankful.
Regards,
Faisal Saleem
View 5 Replies
View Related
Jul 22, 2015
I seem to having a really hard time when making schema changes. Adding a new fact table, renaming a dimension column, adding a new measure or renaming an existing one. Somehow these things tend to cause problems at one or more stages - either running the schema wizard or processing the cube.So I ask, what is your overall strategy for adding or updating new schema updates into your DB with regards to the SSAS project?
Another way to ask this - is how often do you find yourself deleting the the DSV and / or the whole cube and starting over because some schema change lead to a cascade of issues that just didnt seem to want to let you correct them?
View 2 Replies
View Related
May 7, 2015
I have a column being added with VB.net, but I can't figure out the syntax. I get the error No Value given for one or more required parameters. But no clue which one. Below is the code I am attempting.
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Dim conp As String = "SELECT * INTO [Input] FROM [Text;DATABASE="
Dim aCon As String = "W:Glenn-123456VDDDataTest.mdb"
Dim scon As String = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source="
Dim Conn_1 As New OleDbConnection(scon & aCon)
[Code] .....
View 3 Replies
View Related
Jul 17, 2007
Hi,
I updated a report adding parameter expressions. A linked report based on the report I updated didn't get the parameter expressions when I deployed the base report. Anybody else having that issue? It's not much of a problem. I just have to recreate the linked report which is a nusance.
Thanks,
DD
View 5 Replies
View Related
Oct 27, 2007
In our website we have created the reportengine which passes the parameters dynamicaly means whatever parameters are provided in Stored procedure is automaticaly binded to grid from where values are passed to sp as follows.Actualy this code is written by some other developer If Not ParameterTable Is Nothing Then RecordCount = ParameterTable.Rows.Count If RecordCount >= 1 Then For Index = 0 to (RecordCount - 1) ParameterRow = ParameterTable.Rows(Index) Select Case ParameterRow(1) Case "231" RecordType = "SQlDbType.NVarChar" Case "60" RecordType = "SQlDbType.Money" Case "61" RecordType = "SQlDbType.DateTime" Case "62" RecordType = "SQlDbType.Int" Case "59" RecordType = "SQlDbType.Float" Case "104" RecordType = "SQlDbType.Bit" Case Else RecordType = "SQlDbType.Int" End Select myCommand.Parameters.Add(ParameterRow(0), RecordType).Value = (ParameterRow(2))
[red]When Sp is executed with link[/red]<A href="Main.aspx?ReportID=1075443551&ReportName=RptAPandARComparative&ReportDescription=RptAPandARComparative" target="main">
I get the error that nvarchar can not be converted int
Why is is So?Is anybody having same type of experianceIn above link I got reportid as queries select id from sysobjects where name='RptAPandARComparative'
View 5 Replies
View Related
Mar 5, 2008
Hi All,
I have an sql command which has subqueries in it. I need to pass in variables like startdate and enddate to the sub query query and then execute the query. What is the best way to do this?
I am trying to use ole db source but this has a limitation of not allowing parameters at the sub query level. What else can I use? I am working with sql server 2005.
Thanks a lot.
View 6 Replies
View Related
Feb 25, 2008
hello
sorry to distub you again
in fact i'm a beginner and i don't really see how i can do some tasks
when i display a report i want the reader to choose a client, and when he chooses a client, he can choose in the second parameter list, the missions that correspond to THIS client
so i have 3 datasets
one in which i get all my data needed
and i have a filter in where part of query
Code Snippet
where client=@client
and mission=@mission
and i filter on these 2 values
in the second dataset , i gather all the clients i have by doing this query
Code Snippet
select distinct name from client
and i have this third dataset where i gather all the missions corresponding to one client
and here i write
Code Snippet
select mission_label from client
where name=@client
the two fields are in the same time and in this third dataset i apply a filter on Parameters!client.value
but when i execute the report, the second parameter doesn't work, it gives me no choice of mission for a client, it doesn't return anything while when i execute the query in the dataset i have these values
how can i do this please?
thanks a lot in advance
and sorry or bothering with such questions
View 4 Replies
View Related
