Adding Up Occurrences Of Reports On Days Of Week - Get MAX Values
Oct 13, 2014
In my database I am adding up the occurrences of reports on days of the week. If I am not using the MAX value then I get something returned such as
EmployeeID DaysOfWeek ReportID
1001 1 201
1001 2 201
As I just need the highest value returned I'm attempting to use MAX. However, the problem is that all values are being returned in the DaysOfWeek column as 5 even though they may range anywhere from 1-7. The DaysOfWeek should be for a unique EmployeeID/ReportID combination.
WITH sub AS(
SELECT Shifts1.EmployeeID, X.*, Schedule.ReportID
FROM
(
SELECT
CASE WHEN [M] = '1' THEN 1 ELSE 0 END +
[Code] .....
View 8 Replies
ADVERTISEMENT
Nov 30, 2015
We are trying to compare our current calendar week (based on Monday being the first day of the week) with the previous calendar week.
I'm trying to produce a line chart with 2 axis:
- x axis; the day of the week (Mon, Tues, Wed etc - it is fine for this to be a # rather than text e.g. 1 = Mon, 2 = Tues etc)
- y axis; the cumulative number of orders
The chart needs two series:
Previous Week. The running count of orders placed that week.
Current Week. The running count of orders placed this week.
Obviously in such a chart the 'Current Week' series is going not going to have values along the whole axis until the end of the week. This is expected and the aim of the chart is to see the current week compares against the previous week for the same day.
I have two tables:
Orders TableCalendar Table
The calendar table's main date column is [calDate] and there are columns for the usual [calWeekNum], [calMonth] etc.
My measure for counting orders is simply; # Orders: = countrows[orders].
How do I take this measure and then work out my two series. I have tried numerous things such as adapting TOTALMTD(), following articles such as these:
- [URL] ...
- [URL] ...
But I have had no luck. The standard cumulative formulas do work e.g. if I wanted a MTD or YTD table I would be ok, it's just adjusting to a WTD that is causing me big issues.
View 3 Replies
View Related
Nov 20, 2015
I run these stored procedure to build the report and I am able successfully to build the report but I need some prompts to in the report to get the specific data .
ALTER
PROCEDURE [dbo].[Sharepoint_Ticket_Report]
@StartDate
DATETIME,
@EndDate
[Code] ....
And for prompts how to create created_by and message_type dropdowns as shown in picture.
View 7 Replies
View Related
Jan 24, 2006
Is there anyway to get SQL to convert a date to days of the week?
Example, I have a query where the date is "01/01/2006" but I would like it to display "Sunday". Thank you.
View 2 Replies
View Related
Aug 15, 2006
Hi! I am totally new to the forum and to the SQL.
Need your advice. My report will run on Friday automatically and I need to retrieve the data from previous Friday until Today’s Friday.
I have an example from another developer’s code, but this one gets the data on the previous day. Can you please help me to right the expression?
Here is an example ‘on the previous day’
CAST(CONVERT(CHAR(10), tbl1.closeddate,120) as datetime) = CAST(CONVERT(CHAR(10), dateadd(day, -1,getdate()), 120) as datetime)
This is what I did (assuming today is Friday)
(tbl1.closedDate BETWEEN CAST(CONVERT(CHAR(10), DATEADD(day, - 8, GETDATE()), 120) AS datetime) AND CAST(CONVERT(CHAR(10),
DATEADD(day, - 1, GETDATE()), 120) AS datetime))
I don't get any records back.
Please help.
Thanks a lot.
View 11 Replies
View Related
Nov 20, 2007
SET @firstdayofweek = dateadd(day,(datepart(dw,@dtm1)*-1)+1,@dtm1)
--WHILE cast(@firstdayofweek AS DATETIME)AS INTEGER(100))
CREATE TABLE #tmp_table(
childid INTEGER null
,br BIT null
,di BIT null
,te BIT null
,type integer default 0
,DaysOfWeek INTEGER
)
INSERT #tmp_table
SELECT DISTINCT sa.childid
,CASE WHEN sha.br & @mybit>0 THEN 1 ELSE 0 END
,CASE WHEN sha.di & @mybit>0 THEN 1 ELSE 0 END
,CASE WHEN sha.te & @mybit>0 THEN 1 ELSE 0 END
,0
,1
FROM
sessionAttendance sa
,simplehoursassignment sha
,session s
,child c
View 3 Replies
View Related
Feb 4, 2008
hello please hlp
i have one report which list weekdays sum between two days
but the problems is that how i will calculate the week days sum
start date = ------- end date= ------
date | day | job| hours worked| total hours worked
-------------------------
week day sum hours workd=0
date | day | job| hours worked| total hours worked
-------------------------
week day sum hours workd=0
date | day | job| hours worked| total hours worked
-------------------------
week day sum hours workd=0
it should look like this ....
i can list out the week days between two dates but i dont know how to get sum of week day and show above format is there any programming methods are there to calculate the weeksays as field
please help me.....
thanks
View 5 Replies
View Related
Nov 3, 2006
Hi,
I don't know if this can be done, but hopefully one of the experts in this forum cna help me out.
I have a TimeOff table which contains 5 fields: timeoffID, employeename, startdate, enddate, and timofftype. I need to create a report which shows how many people take sick day (one of the timeofftypes) on each week day (i.e. Monday, Tuesday, Wednesday, and etc.) The problem is that I don't know how to convert the date range (from startdate to enddate) into indvidual week day for each timeoff record.
For example, on the table,
TimeoffID employeename startdate enddate timeofftype
1 Andy 11/02/2006 11/03/2006 Sick Day
2 Bill 11/03/2006 11/03/2006 Sick Day
The report needs to show:
Monday Tuesday Wednesday Thursday Friday Saturday Sunday
0 0 0 1 2 0 0
Thank you in advance!
View 4 Replies
View Related
Sep 8, 2015
I need to run a select on Mondays to pull data for 7 days prior to the Thursday of last week; i.e. Friday - Thursday inclusive. I'm sure this is simple, but I work with dates so infrequently that I need a refressher.
View 7 Replies
View Related
May 24, 2015
SQL express 2012. I am trying to case in the where part and having a syntax errors - This is what i am trying to do:
select all the days in week number x including last year if necessary... so if the year start not at the beginning of the week then look in last year as well ( for the same week number of this year and last week nu of last year)
declare
@yyyy int = 2014,-- THE YEAR
@mm int = 1,-- THE MONTH
@week1No int = 1,-- THE WEEK NUMBER IN THE YEAR
@week2No int = 37-- THE last WEEK NUMBER IN last YEAR
select count(tblDay.start)-- tblDay.start IS smallDatetime
[Code] ....
View 2 Replies
View Related
May 24, 2015
SQL express 2012
I am trying to case in the where part and having a syntax errors - this is what i am trying to do:
Select all the days in week number x including last year if necessary... so if the year start not at the beginning of the week then look in last year as well ( for the same week number of this year and last week nu of last year)
declare
@yyyy int = 2014,-- THE YEAR
@mm int = 1,-- THE MONTH
@week1No int = 1,-- THE WEEK NUMBER IN THE YEAR
@week2No int = 37-- THE last WEEK NUMBER IN last YEAR
select count(tblDay.start)-- tblDay.start IS smallDatetime
[Code] ...
View 2 Replies
View Related
Sep 4, 2014
DATEADD function as i'm running into an error...Below is my SQL to derive start date of a month based on deliververydate feild.I'm running into error when i try to add 25 days to the start date of the month.
DATEADD(m,DATEDIFF(m,0,convert(varchar(30),DATEADD (month , @count*3 ,SR.DeliveryDate))),0)
When i want to add 25 days to the start date of a month getting an error...Error SQL
DateAdd(day,(DATEADD(m,DATEDIFF(m,0,convert(varchar(30),DATEADD (month , @count*3 ,SR.DeliveryDate))),0)),25)
Argument data type datetime is invalid for argument 2 of dateadd function.What do i need to change to make it work
View 2 Replies
View Related
Dec 2, 2013
Aim – To add 60days to [Date_Approved_By_Risk__c] column
Query so far is
select
[Date_Approved_By_Risk__c]
--left([Date_Approved_By_Risk__c],10)+60 as correct_date
from #build
where [Date_Approved_By_Risk__c] is not null
[Date_Approved_By_Risk__c] is in the following format “2010-04-30T23:00:00.000Z”
When i add the following “left([Date_Approved_By_Risk__c],10)+60 as correct_date” into the query i get the following error Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the varchar value '2010-07-13' to data type int.
View 9 Replies
View Related
Jul 27, 2005
Hello. How do I increment or decrement a date by adding/subtracting days? For example I want to add 4 days to the date today. I should get 07/31/2005 since today is 07/27/2005. And if I add 5 days then I should get 08/01/2005. Thank you.
View 5 Replies
View Related
Dec 6, 2007
I can't deploy reports on Visual Studio2005 anymore. I say "anymore", because a few months ago, this went well.
After building correctly, VS Studio asks for a Login for Reporting Services via a popup window. I don't know what to enter...
In IIS ( version 5.1) , I configured Reports and ReportServer for integrated Windows Authentication.
In Reporting Services Configuration, I have the Windows Security set on Windows Account, with a username and password that I also use (withoud success) to deploy the reports from Visual Studio. Since the user is a domain user, I tried as login also the complete domain name : domainusername. Nothing helps, the popup "Login for Reporting Servies" appears again and again.
If I change the settings in IIS to allow for anonymous access ( machinenameIUSR_machinename), I get the error message that the permissions granted to that user are insufficient.
I also changed the Windows Service Identity into "Local System" and "Local Service"; with the same result.
In the Log file of Reporting Services, I also find following phrase :
"ReportingServicesService!resourceutilities...INFO: Evaluation copy:0 days left"
I don't know of there is a link between this and my problems
Can anyone help me in this ?
View 4 Replies
View Related
Jan 22, 2015
I have a SQL Server 2005 table titled "Journeys" as follows:
+---------------+
| Journeys |
+---------------+
| JourneyID |
| PlateNumber |
| DepartureDate |
| DepartureKM |
| ArrivalDate |
| ArrivalKM |
+---------------+
The table contains the following sample data:
+------------+--------------+----------------+--------------+--------------+-----------+
| JOURNEYID | PLATENUMBER | DEPARTUREDATE | DEPARTUREKM | ARRIVALDATE | ARRIVALKM |
+------------+--------------+----------------+--------------+--------------+-----------+
| 1 | ABC-123 | 01-01-2015 | 10000 | 01-02-2015 | 10200 |
| 2 | ABC-123 | 01-02-2015 | 10210 | 01-03-2015 | 10500 |
| 3 | ABC-123 | 01-03-2015 | 10500 | 01-04-2015 | 10650 |
| 4 | ABC-123 | 01-04-2015 | 10607 | 01-05-2015 | 10900 |
| 5 | XYZ-999 | 01-15-2015 | 30200 | 01-16-2015 | 30400 |
| 6 | XYZ-999 | 01-16-2015 | 30405 | 01-17-2015 | 30600 |
| 7 | XYZ-999 | 01-17-2015 | 30600 | 01-18-2015 | 30750 |
| 8 | XYZ-999 | 01-18-2015 | 30752 | 01-19-2015 | 30920 |
+------------+--------------+----------------+--------------+--------------+-----------+
I want to generate a query that returns a the following results with an extra column named 'KMDifference' which is the difference between 'ArrivalKM' from last day and 'DepartureKM' from today.
Desired results:
+-------------+---------------+-------------+-------------+-----------+--------------+
| PlateNumber | DepartureDate | DepartureKM | ArrivalDate | ArrivalKM | KMDifference |
+-------------+---------------+-------------+-------------+-----------+--------------+
| ABC-123 | 01-01-2015 | 10000 | 01-02-2015 | 10200 | 0 |
| ABC-123 | 01-02-2015 | 10210 | 01-03-2015 | 10500 | 10 |
| ABC-123 | 01-03-2015 | 10500 | 01-04-2015 | 10650 | 0 |
| ABC-123 | 01-04-2015 | 10607 | 01-05-2015 | 10900 | 7 |
| XYZ-999 | 01-15-2015 | 30200 | 01-16-2015 | 30400 | 0 |
| XYZ-999 | 01-16-2015 | 30405 | 01-17-2015 | 30600 | 5 |
| XYZ-999 | 01-17-2015 | 30600 | 01-18-2015 | 30750 | 0 |
| XYZ-999 | 01-18-2015 | 30752 | 01-19-2015 | 30920 | 2 |
+-------------+---------------+-------------+-------------+-----------+--------------+
[URL]
View 4 Replies
View Related
Jun 6, 2007
If I have a Select statement like this in my C# code:
Select * From foods Where foodgroup In (@foodgroup)
And I want @foodgroup to have these values ... "meat", "dairy", fruit", what is the correct way to add the parameter?
I tried
meat, dairy, fruit
'meat', 'dairy', 'fruit'
but neither worked. Is this possible?
View 2 Replies
View Related
Dec 20, 2007
Hello,
I have a drill down report and would like to add interactive sort on two columns:- column 1 & column 2. These two columns should be in descending order. By adding this, when user's click on column 1 they will see the data based on the sorted order.
Does anyone help me on this issue.
Thanks,
BL
View 5 Replies
View Related
Oct 13, 2015
I am trying to write a query to calculate the running difference between data on different dates. Below is what my table of data looks like. Basically I want to calculate the difference between the total_completed for each state and date.
DateStatesTotal_Completed
08/27/15CA 19,952
09/11/15CA 26,336
10/02/15CA 35,444
10/08/15CA 38,278
08/27/15CO2797
09/11/15CO3264
10/02/15CO4270
10/08/15CO4297
below is what I am trying to achieve:
DateStatesTotal_CompletedCompleted_Difference
08/27/15CA 19,952 0
09/11/15CA 26,336 6,384
10/02/15CA 35,444 9,108
10/08/15CA 38,278 2,834
08/27/15CO27970
09/11/15CO3264467
10/02/15CO42701,006
10/08/15CO429727
below is my code (I almost have what I need) I just can't figure out how show 0 as the completed_difference for the first Date for each state since there is no prior date to calculate against.
MRR_TOTALS_WEEK_OVER_WEEK AS
(
SELECT
T1.[Date]
,T1.States
,T2.Total_Completed
,ROW_NUMBER() OVER(PARTITION BY T1.States ORDER BY T1.States,T1.[Date]) AS ORDERING
FROM TOTAL_CHARTS T1
LEFT JOIN TOTAL_COMPLETED T2 ON T1.[Date] = T2.[Date] AND T1.States = T2.States
)
[code].....
View 4 Replies
View Related
Oct 6, 2005
This is a pretty simple query that tracks 'yesterdays' apply clicks on our website.
SELECT MIN(A.hitDate) AS minDate, D.AffiliateName, B.ProdType, COUNT(DISTINCT A.ipAddress) AS TOTAL
FROM ArchiveApplyTracking A LEFT OUTER JOIN
Configuration.dbo.Affiliates D ON A.affiliateID = D.AffiliateID LEFT OUTER JOIN
Incoming C ON A.campaignID = C.ID LEFT OUTER JOIN
Configuration.dbo.ProductType B ON A.productTypeID = B.ProdNo
WHERE (A.hitDate >= DATEADD(d, DATEDIFF(d, 0, GETDATE() - 1), 0)) AND (A.hitDate < DATEADD(d, DATEDIFF(d, 0, GETDATE()), 0)) AND (A.deal = 1) AND
(A.ipAddress NOT IN
(SELECT ipAddress
FROM [Tracking].[dbo].ipTracking)) AND (B.ProdType NOT LIKE 'refused%') AND (D.AffiliateName LIKE 'ARROW%') AND
(B.ProdType NOT LIKE '%prequalify%')
GROUP BY D.AffiliateName, B.ProdType
ORDER BY D.AffiliateName
No problem there, that's fine.
But how can i put a simple date range interface on my published report so users can say "get me the stats from 04/09/2005 to 20/09/2005, which then runs the query?
Thanks for any help
View 1 Replies
View Related
Jul 20, 2005
Hello:I have a stored procedure for generating our invoices in CrystalReports. I have added a new field to the SP, but when I try to add thefield to my Crystal Report invoice, the field isn't available in thelist. However, if I create a new, blank report using the same storedprocedure as the datasource, the field is available. I've seeminglytried every iteration of "Verify Database" to no avail.The obvious answer would be to simply drop the sp from my existingreport and then re-add it. However, if you do this, all your fields onthe report are dropped.Any ideas?Thanks,Scott
View 1 Replies
View Related
Nov 13, 2007
Hi ,
i hav a problm ,How can i see sql sever reports in RMS,(Retail managmt System),How can we add these reports on that?
Thanks in advance..
Jo
View 7 Replies
View Related
Apr 9, 2013
How can I get Saturday's date given the week number?
This is my week number, SELECT DATEPART(WEEK, DATEADD(MONTH, +3, ApptDt2)). I need to get Saturday's date from this week.
View 9 Replies
View Related
Sep 17, 2015
i have the following table I need to select dates grouping them by weeks, my week start is Saturday to Friday
CREATE TABLE weekdays
(
datevalue datetime NOT NULL
, numericvalue INT NOT NULL
);
INSERT INTO weekdays (datevalue, numericvalue) VALUES
[code]....
The output should look like this
weeknototalvalue
362015-09-01 00:00:00.000
362015-09-02 00:00:00.000
372015-09-07 00:00:00.000
372015-09-08 00:00:00.000
382015-09-12 00:00:00.000
382015-09-13 00:00:00.000
382015-09-14 00:00:00.000
392015-09-19 00:00:00.000
View 4 Replies
View Related
May 23, 2007
Hi all,
I'd like to add a yesterday dimension member to a new dimension, like a "Time Utility" dimension, that references the second last day of non empty data in a cube.
At the moment, I'm doing this:
Code Snippet
create member [MIA DW].[DATE TIME].[Date].[Yesterday]
as [DATE TIME].[Date].&[2007-01-01T00:00:00]
select [Measures].members on 0,
non empty [DATE TIME].[Date].members on 1
from [MIA DW]
But the [yesterday] member does not seem to belong to [DATE TIME].[Date].members?
So I guess there's two questions:
1) Can I have a new empty dimension which contains all these special members like "Yesterday" or "This Week" and "Last Week" (these last two obviously refer to a set of Dates)
2)How come the Yesterday member is not returned by the .members function?
Thanks
Greg
View 3 Replies
View Related
Jan 29, 2014
I am adding week hrs using while loop , but it can continue next week hrs also.
I can get every week start hrs while update @tem1 table
employeeidreportdatereportatleftattoaccountwrhrn
12902014-01-29 00:00:00.00009:3019:1556001
12902014-01-28 00:00:00.00009:0018:4555802
12902014-01-27 00:00:00.00009:0018:455585583
12902014-01-25 00:00:00.00008:0010:0012004 -- week end
12902014-01-24 00:00:00.00009:1718:4554105
12902014-01-23 00:00:00.00009:1918:4654606
12902014-01-22 00:00:00.00009:1718:4754507
12902014-01-21 00:00:00.00009:1618:3552608
12902014-01-20 00:00:00.00009:1818:555435439
My loop statement
while(select MAX(wrh) from @tem1 where wrh = 0) < 1
begin
update @tem1
set wrh = (select toaccount from @tem1
where reportdate = (select min(reportdate) from @tem1 where wrh = 0))+(select max(wrh) from @tem1)
where wrh = (select max(wrh) from @tem1 where wrh = 0 )
and reportdate = (select min(reportdate) from @tem1 where wrh = 0)
end
this is the result while executing loop statement .
employeeidreportdatereportatleftatdehdrhwehwrh
129029 Jan 201409:3019:15008:0009:20024:00065:54
129028 Jan 201409:0018:45008:0009:18016:00056:34
129027 Jan 201409:0018:45008:0009:18008:0009:18
129025 Jan 201408:0010:00005:0002:00045:00047:16 -- week end
129024 Jan 201409:1718:45008:0009:01040:00045:16
129023 Jan 201409:1918:46008:0009:06032:00036:15
129022 Jan 201409:1718:47008:0009:05024:00027:09
129021 Jan 201409:1618:35008:0008:46016:00018:04
129020 Jan 201409:1818:55008:0009:03008:0009:03
How to update only that week hrs , don't continue next week...
View 4 Replies
View Related
Apr 29, 2008
In my reports I am extracting the data of number of people joined in all the weeks of the year. And in one of reports I have to extract the data of the number of people joined until the last week from the first week. I am trying out all the logics but nothing is working for me as such. Can any one help me with this issue??????
View 4 Replies
View Related
Jul 23, 2015
I need a Select sentence that return me the first week of the month for a given week.
For example If I have week number 12 (Begins 2015/03/16 and Ends 2015/03/22) I need that returns 9, I mean Week number 9 wich is the first week of march (having in mind @@DATEFIRST).
I only need give a week number of the year and then returns the week number of the first week of that month.
View 34 Replies
View Related
Feb 2, 2008
I'm looking for a way to convert the [week number, year] back to the date for the 1st day of that week.
Example (assuming DATEFIRST has been set to 1) : Week 3, 2008 = January 14, 2008
Is there a SQL function that will do this?
Thanks,
Mike
View 11 Replies
View Related
Apr 5, 2007
I have 21 Boolean fields that I would like to calculate a percentage from. If the boolean value is true I would like to be able to return a percentage of Outcomes available from a possible of 21. So If 7 of my boolean fileds are true then i would like to be able to calculate that 33% of Outcomes are present.
Does anyone have anything that will get me started?
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Client]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Client]
GO
CREATE TABLE [dbo].[Client] (
[RecordID] [int] IDENTITY (1, 1) NOT NULL ,
[FacilityNumber] [int] NOT NULL ,
[AdmitNumber] [int] NOT NULL ,
[LastName] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[FirstName] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[MiddleName] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Suffix] [nvarchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[BirthDate] [datetime] NULL ,
[AdmitDate] [datetime] NULL ,
[AdmitWeight] [real] NULL ,
[IdealWeightLow] [real] NULL ,
[IdealWeightHigh] [real] NULL ,
[Unit] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Bed] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[MedicaidNumber] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[GuardianName] [nvarchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[GuardianAddress1] [nvarchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[GuardianAddress2] [nvarchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[GuardianCity] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Outcomeb01] [bit] NULL ,
[Outcomeb02] [bit] NULL ,
[Outcomeb03] [bit] NULL ,
[Outcomeb04] [bit] NULL ,
[Outcomeb05] [bit] NULL ,
[Outcomeb06] [bit] NULL ,
[Outcomeb07] [bit] NULL ,
[Outcomeb08] [bit] NULL ,
[Outcomeb09] [bit] NULL ,
[Outcomeb10] [bit] NULL ,
[Outcomeb11] [bit] NULL ,
[Outcomeb12] [bit] NULL ,
[Outcomeb13] [bit] NULL ,
[Outcomeb14] [bit] NULL ,
[Outcomeb15] [bit] NULL ,
[Outcomeb16] [bit] NULL ,
[Outcomeb17] [bit] NULL ,
[Outcomeb18] [bit] NULL ,
[Outcomeb19] [bit] NULL ,
[Outcomeb20] [bit] NULL ,
[Outcomeb21] [bit] NULL ,
[GuardianState] [nvarchar] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Outcomea21] [bit] NULL ,
[Outcomea20] [bit] NULL ,
[Outcomea19] [bit] NULL ,
[Outcomea18] [bit] NULL ,
[Outcomea17] [bit] NULL ,
[Outcomea16] [bit] NULL ,
[Outcomea15] [bit] NULL ,
[Outcomea14] [bit] NULL ,
[Outcomea13] [bit] NULL ,
[Outcomea12] [bit] NULL ,
[Outcomea11] [bit] NULL ,
[Outcomea10] [bit] NULL ,
[Outcomea09] [bit] NULL ,
[Outcomea08] [bit] NULL ,
[Outcomea07] [bit] NULL ,
[Outcomea06] [bit] NULL ,
[GuardianZipCode] [nvarchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Outcomea05] [bit] NULL ,
[Outcomea04] [bit] NULL ,
[Outcomea03] [bit] NULL ,
[Outcomea02] [bit] NULL ,
[Outcomea01] [bit] NULL ,
[GuardianPhoneNumber] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[SSN] [nvarchar] (12) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Gender] [nvarchar] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Race] [nvarchar] (1) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[AdmittingDiagnosis] [ntext] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[CurrentDiagnosis] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Active] [bit] NULL ,
[CAPMRDDWaiverServices] [bit] NULL ,
[upsize_ts] [timestamp] NULL ,
[EventTriggerCount] [int] NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
ALTER TABLE [dbo].[Client] ADD
CONSTRAINT [DF__Client__Facility__117F9D94] DEFAULT (0) FOR [FacilityNumber],
CONSTRAINT [DF_Client_AdmitNumber] DEFAULT (0) FOR [AdmitNumber],
CONSTRAINT [DF__Client__AdmitWei__1367E606] DEFAULT (0) FOR [AdmitWeight],
CONSTRAINT [DF__Client__IdealWei__145C0A3F] DEFAULT (0) FOR [IdealWeightLow],
CONSTRAINT [DF__Client__IdealWei__15502E78] DEFAULT (0) FOR [IdealWeightHigh],
CONSTRAINT [DF__Client__CAPMRDDW__164452B1] DEFAULT (0) FOR [CAPMRDDWaiverServices],
CONSTRAINT [aaaaaClient_PK] PRIMARY KEY NONCLUSTERED
(
[RecordID]
) ON [PRIMARY]
GO
View 2 Replies
View Related
Sep 21, 2015
I have created a custom library(CodeLibrary) which internally references the dlls Microsoft.TeamFoundation.Client and Microsoft.TeamFoundation.WorkItemTracking.Client.
I added this custom Dll codelibrary.dll to my SSRS report. and the expression of one of the field as
=codelibrary.codefunction.GetValue(1000)
codefunction is the class and GetValue is the method.
When I preview the report, I get the error "Error while loading code module:
'CodeLibrary,Version=1.0.0.0,Culture=neutral,PublicKeyToken=null'. Could not load file or assembly 'CodeLibrary,Version1.0.0.0, Culture=neutral,PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
I am using VS2013, I have placed the custom library DLL in the path
C:Program FilesMicrosoft Visual Studio 12.0Common7IDEPrivateAssemblies
I have tested the custom library with a WPF application and it works fine.
I am not able to figure out what is causing this error.
View 4 Replies
View Related
Feb 15, 2007
Hello all, i have 2 sql tables, and they each contain a column with bigint values. What i want to do is add up the values from both table, and then display it as 1 number. Supposing i have the following
table name: DownloadTable
fileName | DownloadSize |
file1 | 45
file2 | 50
file3 | 20
---------------------------------------------
second table
table name: VideoTable
fileName | VideoSize |
file1 | 40
file2 | 60
file3 | 20
----------------------------------------
Now, i want this to output 120, wich is the sum of the sum of the values of table 1 and 2 I've already tried the following:
SELECT SUM(DownloadTable.DownloadSize) + SUM(VideoTable.VideoSize) FROM DownloadTable, VideoTable
However, when i ran this, it gave me a huge number, that was far from accurate from what it was suppose to output. Can anyone help me?
Thanks in advance
Regards,
View 8 Replies
View Related
Apr 15, 2008
Hi guys, I need some help again please.
On my page load, I need the following done...
I have a label control that must display a certain numeric value. This value must be the sum of an array of values that must be retreived from a table ("Details") with the column name "DealValue" but only where the column "ConsultantID" = txtConsultant.text
I understand the select statement, but I don't know how to "run" through the table to add all the values. Can someone please help me with this and how I would construct the MSSql select statement for this.
Thanks again
View 4 Replies
View Related