Is there a certain way of adding users to access a linked server? I
linked to an Oracle server but somehow, I'm unable to add any users,
even after trying in EM. It'll allow me to select the local account,
enter a remote userid/password, click apply save, but doesn't seem
to hold the info.
Please help!
Thanks,
Danny
We have an existing SSRS server, and have just created a new child domain. We'll be migrating users from the parent to the child, and want to add the users of that new domain with access to SSRS. In the parent domain they are able to access, but after migration with the child domain account, they cannot.
I have added the group CHILDDomain Users with a system user role on SSRS, and PARENTDomain Users was already there.
Is there any additional step I should/could take to get this active?
I am sure that I am missing something which is why I am in need of the communities assistance...
I have installed SQL Server 2005 Express Edition. I can log in with the Windows Authenication and the SQL Server Authentication using the 'sa' account. This is all good...
What I want to be able to do is add 1 to 3 more users so they can gain access to the database I have created to run queries and add data. This is the part I am confused about. How do I get additional users added??
Thanks in advance for your time and assistance!
Hello experts. I inherited two SQL2000 SP4 servers. ServerA is configured with a Linked Server (ServerB). The problem is that liked_user which is the login configured "For a login not identified in the list above, connections will be made using this security context" is a sysadmin on ServerB. This means that any login from ServerA can do havoc on all databases in ServerB! There are many DBs and logins on both servers and no one can tell us which login is supposed to connect to the other server on which DB with what permission. Now, we want to trace which logins in ServerA use this Link so we can reconfigure this nasty setting.
I started the following SQL Profilers: On ServerA --> Filter TextData Like %ServerB%. On ServerB --> Filter LoginName Like liked_user AND HostName Like ServerA
Interesting enough, several entries were logged on the profiler i ran in ServerB which means that liked_user logged into ServerB from ServerA. Since liked_user is only used by the Link, i can safely conclude that the link was used by some login in ServerA. BUT, nothing was logged in the profiler i ran on ServerA!
Can anyone help me sort this one out? Thanks in advance,
HI,
There is a requirement to transfer a table data from a oracle view to a SQL Server table. These both reside on the same box. I am trying to add the oracle instance as a linked server, like this:
EXEC sp_addlinkedserver @server = @SOURCE_SERVER_NAME, @srvproduct = '', @provider = @PROVIDER_NAME, @datasrc = @DATA_SOURCE_NAME
The server gets added. But When I use this string as part of a stored procedure (or even not use it there), which does the work of transfering the data as required, I get this error:
Server: Msg 7399, Level 16, State 1, Procedure UBS_PULL_HR_DATA, Line 125
OLE DB provider 'MSDASQL' reported an error.
[OLE/DB provider returned message: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified]
OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBInitialize::Initialize returned 0x80004005: ].
I have added this Name in the System DSM also. I dont know how to go about it. Can any one please help?
Thanks a lot and let me know if the question is not clear.
Mannu.
Does anyone know how to link an Oracle (8.0.6.0) database to a MS SQL 7.0 db? I have set up the ODBC and it works with no problem. I can get tables from the oracle db and bring them into MS access with ODBC so I know that it is set up correctly. I just cant get visability to the db in a sql 7 environment. Any help or sugestion would be appreciated.
Thanks
-NES
Hi @all,
I try to add a new Linked Server to my DB in Microsoft SQL Server Management Studio Express...
The following error is returned (SERVER2 is the Linked Server to add):
There is no remote user 'sa' mapped to local user '(null)' from the remote server 'SERVER2'.
(.Net SqlClient Data Provider)
I entered the user sa and the correct password for SERVER2 but it doesen't work...
When I connect to SERVER2 in Management Studio with the same infos it works fine...
So please help...
Hi,
I'm trying to extract all the users and their membership to groups, and the membership of groups to groups from active directory though a link to server.
I can get the users. I can get the groups.... individually.
I can't get the info of what user is a member of or who are members of a group.
Anyone know how to do this or am I going to have to right a vb app? (Anyone already got the code...)
I want to load this data into tables for reporting in my Data Warehouse.
Cheers
Chris
I am attempting to add a linked server to ORACLE from SQL Server. I am able to get the linked server to work using the MS OLE DB Provider for Oracle , however I would rather use the Oracle Provider for OLE DB. When I set the linked server to use the Oracle provider I get the following error when issueing a query.
Could not execute query against OLE DB provider 'OraOLEDB.Oracle'.
OLE DB error trace [OLE/DB Provider 'OraOLEDB.Oracle' ICommandText::Execute returned 0x80040155].
The query I attempt is
select * from openquery(oracle_test,'select count(*) from employee')emp
Does anyone have a suggestion on a solution?
I have a situation that I need to add a field to a table over linked server. The specifications of this is dynamic and it is being done in TQL / Stored procedures and this can not change. My code is generating the statement just fine and if I copy paste it to a new SSMS window and execute it WORKS.. The problem is I need to dynamically generate the statement (I am doing that just fine, I THINK). THEN I need to execute the statement IN THE SPROC, this part is not working.
Here is the code:
SET @AlterSQL = @DestinationServerName + '.[' + @DestinationDBName +'].' + @DestinationSchemaName + '.sp_executesql N'' ALTER TABLE '
+ @DestinationTableName + ' ADD ' + @TempColumn + ' int' + CHAR(39)
The above Creates this when I expose it via a PRINT statement:
addb15.[FSParallel].dbo.sp_executesql N' ALTER TABLE Node ADD ImportIdentity int'
After I create the statement I use:
EXEC @AlterSQL
And this returns the following error:
Msg 2812, Level 16, State 62, Procedure ETLDynamicImport, Line 244
Could not find stored procedure 'FSParallel.dbo.sp_executesql N' ALTER TABLE Node ADD ImportIdentity int''.
<hr noshade size='1' width='250' color='#BBC8E5'>
Is it Possible adding Windows (activi directry users) from SQL Server which is running Windows authotication.?
Have small network of NT workstations, A PDC and BDC. We have one SQL database on the PDC and two others on the BDC. I added a new machine to the network, added users to that machine. When I try to add the new user, (Not Machine) to the database on the BDC, using security, add new user, I get the following message: Microsoft SQL-DMO ( ODBC SQL Statement 42000)
Error 15401: Windows NT user or group "domainnameusername" not found Check the name again.
The user 01 is listed on both the PDC and the BDC. I am totally baffled by this. Any help would be appreciated.
Stephen
Created a report in SSRS 2005 on a test windows server 2003.
I have admin rights on this server.
I can access it by http://localhost/reports
and then click on the report itself to view the data.
Now I would like my colleague to access this report on this server.
He does NOT have admin rights.
I would like him to view the report from his browser by typing:
http://servername/reports or something simiilar.
How/where do I add him to have access to the report?
Thanks
More of a SQL Server problem than a ASP one but hope you can help me :)
Im tryin to do my first data based application using ASP.net and silly me I forgot to add users when I created then database so now Visual Studio can't access it.
Can someone tell me the syntax to add/create a user to MSSQL database so I can then grant them privelidges to the tables.
thanks very much
Tom
Hi everyone out there in ASP.NET land.
Have a quick question...
How do I add a role and/or a user through code (Specifically SQL Statements). If not through SQL, then maybe VB.NET?
Thanks ahead of time,
Denvas
Hi there NT Server,sqlserver 7.0, Integrated Security. I used "sp_attach_db" to attach a database to the sql server. The database has 3 standard roles with members in each of those roles. But i am not able to add a user to any of the roles through Enterprise Manager(No users are listed, except the other 2 roles). Also when i click "users" under the Database in EM, no users are listed except "dbo" with sa login. Luckily since some members are there in the roles, they are able to connect to the database. Also i am not able to add the user bcos the user exists in the public role and i get an error message "user already exists in DB". The user has logged into the NT and everything is fine. I copied the .mdf and .ldf files from a "Standard Security" Server.
View 1 Replies View RelatedI have a need to add all the users listed in the sysxlogins table to the db_datawriter role. I wrote a proc that does this. It indicates that each user is successfully added to the role, but they aren't. If I look at the user in EM, they don't have that role checked. I've tried all the obvious stuff like close EM and re-open, etc...it doesn't help.
Here is the proc
CREATE proc sp_MyProc
@DBName varchar(256)
As
Declare UID_Cursor Cursor
For
Select Name from master..sysxlogins Where Len(Name) = 7 Order By Name
Open UID_Cursor
Declare @Name as varchar(256)
Declare @TempString as varchar(8000)
Fetch Next from UID_Cursor into @Name
While (@@Fetch_Status <> -1)
Begin
Set @TempString = 'sp_addrolemember ''db_datareader'', ''' + @Name + ''''
Exec(@TempString)
Fetch Next from UID_Cursor Into @Name
End
Close UID_Cursor
Deallocate UID_Cursor
Hi,
I€™m looking for a way to add users to view reports in SSRS. We have set up SSRS to use forms authentication and have been running with no problems for a few months now. When we add new users to the aspnetdb we also have to go into management studio and give them permission to view reports. (Currently all users have the same permission which is set in the root folder policy in SSRS)
We have now set up a .NET application which allows our client to manage their users online, however they don€™t have the knowledge or access to Management Studio in order to permit new users to access reports.
Is there a way, through SP or .NET script to programmatically add users to the policy / security descriptor in SSRS. I have already been playing with the XML Description in the SecDesc table of the ReportingServices database. This seems to contain all the necessary data, but modifying doesn€™t work. In the same table is a Binary SecDesc field which I suspect has complementary data to go with it. Is there a way of generating this data?
Any help with this, or another method will be greatly appreciated.
Sean.
I have to give three users read access to a database.  My manager told me to map them to a User called "zxDatabase.Read.ug". I scripted the User and got this...
CREATE
USER[zxDatabase.Read.ug]
FORLOGIN[zxDatabase.Read.ug]
I don't see a Login at the server level named zxDatabase.Read.ug, so this is confusing. Where is this login in SSMS?
How do I map my three users to user zxDatabase.Read.ug. Or am I not understanding correctly? Do I just add there windows login to the database as Users and configure them the same as zxDatabase.Read.ug
I do not understand the sequence in which to add logins/users. A coupleof things to note. I can not use vbscript - it has to be done using thesqldmo objects (or in a sql script).The sequence I use now is:1- create login, set default db2- add login to sql server3- set db owner4- create user5- add user to master db6- add user to tempdb - blows up hereError 'Microsoft SQL-DMO: [SQL-DMO]This object is already in acollection.'I need the user in 3 dbs. Any help greatly appreciated. Thinking aboutit...I bet by adding it to the master db that it is automatically addedto tempdb so I will try to add it to the 2rd db and see if that works.Thanks!-Will
View 2 Replies View RelatedI am in the process of rolling out a pair of SQL 2014 servers. I have setup an Availability Group, Listener and databases. It's my understanding that I will be giving the listener name to our developers so that they can do their work. In testing, I noticed that If I am using Studio Manager and connected to the the AG using the listener name, when I setup a user in security the user is only added to the active primary node. Is there a way to add a user to both servers in one shot instead of having to install on both servers?Â
View 5 Replies View RelatedRunning SQL Server 2005 x64 Enterprise on Windows Server 2003 X64 Enterprise and I am getting the error below when I add users to the permissions on the SRS HOME folder with browser rights.
Response is not well-formed XML. (System.Web.Services)
Unexpected end of file has occurred. The following elements are not closed: Message, MoreInformation, detail, soap:Fault, soap:Body, soap:Envelope. Line 11 position 30230. (System.Xml)
I need to add more users to reporting services and have never experienced this before.
Developers need to view and modify jobs on some servers without being sysadmin. We've added the developers to the following MSDB roles:
SQLAgentOperatorRole
SQLAgentReaderRole
SQLAgentUserRole
Technically they should be able to view and modify jobs through Management Studio when being added only to SQLAgentOperatorRole. However they receive the following error when clicking on the Jobs folder regardless of the msdb role.
Execute Permission Denied on Object 'xp_sqlagent_enum_jobs', database 'mssqlsystemresource', schema 'sys'. (Microsoft SQL Server, Error: 229)
Our original two SQL 2005 servers do not produce this message, but all other instances do. All servers, but one, are SP2 so the service pack is not an issue. Any thoughts?
Thanks, Dave
Can someone tell me how to go about adding security to a field in a linked table so that only certain people can access and modify the information? Thank you in advance to anybody who can help me out here!
View 6 Replies View RelatedHi ,
On my Desktop i registered Production Server in Enterprise Manager
on that Server if i go to SecurityLinked Servers
There is another Server is already mapped, when i am trying to see the Tables under that one of the
Linked Server i am getting the Error message saying that
"Error 17 SQL Server does not exist or access denied"
if i went to Production Server location and if i try to see the tables i am able to see properly, no problems
why i am not able to see from my Desk top
i am using the sa user while mapping the Production Server on my DESKTOP using (ENTERPRISE MANAGER)
And i check the Client Network Utility in the Alias using Named Pipe only, i changed to TCP/IP still same problem
What might the Problem how can i see the Tables in Linked Server from my DESKTOP
Thanks
I am using Linked Server in SQL Server 2008R2 connecting to a couple of Linked Servers.
I was able to connect Linked Servers, but I cannot point to a specific database in a Linked Server, also, I cannot rename Linked Server's name.
How to point the linked server to a specific database? How to rename the Linked Server?
The following is the code that I am using right now:
USE [master]
GO
EXEC master.dbo.sp_addlinkedserver
   @server = N'Machine123Instance456',
   @srvproduct=N'SQL Server' ;
GO
EXEC sp_addlinkedsrvlogin 'Machine123Instance456', 'false', NULL, 'username', 'password'Â Â
Hi Everyone,
I have set up a link from ACCESS to a SQL 7.0 database using ODBC (File DSN saved on a shared DRIVE). The link works well only from the workstation where the link was created. But How can I create a link so a group of users can view the linked table in ACCESS without type a password? Any suggestion is appreciated.
Lunjun
Is there a way to bypass the syntax checking when adding a stored procedure via a script?
I have a script that has a LINKed server reference (see below) .
INSERT
INTO ACTDMSLINKED.ACTDMS.DBO.COILS ..etc.
ACTDMSLINKED does not exist at the time I need to add the stored procedure that references it.
PLEASE to not tell me to add the LINK and then run the script. This is not an option in this scenerio.
Thanks,
Terry
I have had this issue just pop up. I have local users who can connect fine, but my users that require connection by VPN cannot connect. I get the server not available or access denied error. I did confirm that the VPN'ers are connected to the network correctly and can see that their shares and mappings are correct. Any ideas? Thanking you all in advance!!
View 6 Replies View RelatedI am trying to revert back to Windows 7 after upgrading to Windows 10, however it will not let me and the following message occurs: "Remove new accounts.Before you can go back to a previous version of Windows, you'll need to remove any user accounts you added after the most recent upgrade. The accounts need to be completely removed, including their profiles.You created one account (NT SERVICEMSSQLSERVER) Go to Settings> Accounts> Other users to remove these accounts and then try again".However I did not create any new users and there are no other users listed in the Accounts section.
View 2 Replies View Relatedhi alli've got two tables called "webusers" (id, name, fk_country) and "countries" (id, name)
at the meantime, i've a search-page where i can fill a form to search users. in the dropdown to select the country i included an option which is called "all countries".
now the problem is: how can i make a stored procedure that makes a restriction to the fk_country depending on the submitted fk_country parameter?it should be something like
SELECT * FROM webusers(if @fk_country > 0, which is the value for "all countries"){ WHERE fk_country = @fk_country}
who has an idea how to solve this problem?
Hi Team,
In SQL Enterprise Manager, when we expand "Database -->Users", we see the
users there. When we expand "Security --> logins" we see the same users there.
Can you differentiate these two.
Thanks
Santhosh
I want to be able to list all users connected/logged in a specific database and disconnect them all or a certain user.
can this be done in SQL and if so how?