Addition Of Columns In Table, Which One Use In Merge Replication.
Nov 29, 2004
Dear all participants,
I manage complete online system for two locations, connected via dialup lease line. I have to used merge replication for the same data should be at both locations. It is working fine, I don’t like disturbe it but current requirement is addition of two column in one table which one as also use in merge replication.
How I can add aforesaid columns in table x, column name c1 numeric , c2 character?
What is impact on replication?
Let me know step by step.
Thanks in advance.
Thanks R.Mall
View 1 Replies
ADVERTISEMENT
Jan 22, 2005
Can any help me addition of article in runnning merge replication in MSSQL SERVER 2000 with SP3.
Any step by step help is realy great for me.
Thanks
R.Mall
View 1 Replies
View Related
May 25, 1999
I think I want to use merge replication but filter out one column but when I'm setting up the publication I only see row filtering available?
Is this just not possible?
Thanks for any help
Dan
View 1 Replies
View Related
Dec 4, 2006
Hi,
I am experiencing a wired problem withe merge replication and SQL 2000 SP4.
We had replication working for 4 years without a problem, one of the table that we replicate has been growing in columns, now it has 55 columns.
I have noticed a problem, when I update the last column on the table and waits for the change to be updated on the subscriber the change is not there. But if I replicate the first 40 columns it works.
Changes made:
1) Upgraded to SP4
2) Added some extra fields using sp_addreplcolumn
Is this a known bug? Any ideas?
Regards
View 3 Replies
View Related
Nov 3, 2015
I was reading this:
"Adding an identity column to a published table is not supported, because it can result in non-convergence when the column is replicated to the Subscriber. The values in the identity column at the Publisher depend on the order in which the rows for the affected table are physically stored. The rows might be stored differently at the Subscriber; therefore the value for the identity column can be different for the same rows."
I don't understand...
If I create a table with an identity column and publish it. Can the values on the subscriber be different when the data is replicated?
Suppose I have a this table:
1 Name1
2 Name2
3 Name3
Column 1 is identity field and column 2 the name of employees.
If I publish this table , the data can be inserted on the subscriber .pe, with 2 name1 and 1 name3 and 1 name2?
What about if the identify fields is a primary key?
View 6 Replies
View Related
Dec 21, 2005
Hi,
I read the BOL on how the publisher will had out identity ranges to subscribers, but it was not clear if this was also the case for anonymous subscribers. Will merge replication with identity columns work with anonymous subscribers that sync via HTTPS?
Thanks,
Darrell Young
View 1 Replies
View Related
Sep 19, 2006
Hi *,
I have a table with 2 columns A1 and Firm. A1 holds "dirty data" and there are no NULL values. Firm holds "clean data" for some of the rows in A1 but not for all. So there are quite a few NULL values in this column. I want to replace the value in A1 if there is any data in Firm (value <> NULL).
Rigth now, I solve this issue with a simple VB.NET script:
Public Class ScriptMain Inherits UserComponent Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer) ' If Row.Firm_IsNull Then Row.Standard = Row.A1 Else Row.Standard = Row.Firm End If ' End SubEnd Class
Any ideas how to solve this issue without custome code?
Thanks!
View 1 Replies
View Related
Jul 13, 2007
Hi,How to add new table to merge replication ?When I do this in Enterpriise Manager i got an error:Server: Msg 2758, Level 16, State 1, Procedure sp_addmergearticle,Line 466RAISERROR could not locate entry for error 20085 in sysmessages.What is wrong ?Thank for any helpLuk
View 1 Replies
View Related
Sep 27, 2007
Hi,
I have a table used in Merge Replication. If i add a new column in that table it gives me an error for tables in which either this table is a key or this table has key from other tables "Error validating the default for column 'rowguid'." Also for views i'm getting an error
"View 'dbo.vw_TestCaseBasic': indexes and schema binding will be removed."
If i proceed further i get an error and m not able to add the column.
"It is invalid to drop the default constraint on the rowguid column that is used by merge replication.
The schema change failed during execution of an internal replication procedure. For corrective action, see the other error messages that accompany this error message.
The transaction ended in the trigger. The batch has been aborted."
Is there any solution for the same?
Regards,
Ruchir Jain
View 4 Replies
View Related
Dec 29, 2004
We are using merge replication and it is working fine. We are looking for increase in on numeric column 10,5 instead of 7,2. How I can do it?
Any suggession highly appreciated by us.
Thanks
View 1 Replies
View Related
Dec 31, 2001
Hi everbody,
Anybody tell me how to add new table in merge replication using Enterprise manager or T-sql.
Thanks in advance
View 1 Replies
View Related
Oct 3, 2001
Hi,
I tried with success to replicate a table_test_repl from my local server to an other server.
I used only one table for testing.
After that, i can't drop the 2 tables a_test_repl (on my local server and the other : I've got a message 'cannot drop the table because it is published for replication'
What can I do? I need absolutely to drop these tables to keep a clean model
and I can't drop the database and try again.
Thanks to your answers
Axel
View 1 Replies
View Related
Jul 23, 2005
One of the table that is in a merge replication somehow is missing anindex. Strangely, only the table in one of the subscriber of the mergereplication is missing the index; another subscriber and the publisherof the merge replication don't have this problem.How should I add the missing index back to that table? My understandingis that making structural change on a table that is inmerge-replication is different from making change on a table that isnot merge-replicated. For example, when we need to add a column into atable that is being merge-replicated, we must add the column bychanging the attributes in the properties of the published article(table) instead of simply using CREATE INDEX command. I am wonderingwhether there is a similar restriction on adding an index onto a tablethat is merge replicated.I have already added the index back to the table anyway. I am askinghere just in case doing this may get me into a problem later on.Thanks in advance for any info.Jay Chan
View 3 Replies
View Related
Oct 31, 2006
Can someone point me to a resource for Table Design Considerations for Merge Replication? I have an ASP.Net/SQL2K5 app that I need to run on disconnected machines, then allow dfor data sync through merge replication. I assume that the first step is getting my tables indexed in a replication friendlt manner?
Many Thanks to anyone who can point me in the right direction!
View 3 Replies
View Related
Sep 3, 2007
Hi
I faced with strange problem.
From time to time, during syncronization I get the following errors at the subscriber:
ERROR: -2147200992
SOURCE: Merge Replication Provider
TEXT: The merge process could not store conflict information for article 'Products'. Check the publication properties to determine where conflicts records are stored. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
ERROR: 2812
SOURCE: OFF1SQLEXPRESS
TEXT: Could not find stored procedure 'MSmerge_cft_sp_49D28CEAFF8A4ACC5C5462B5027D4E4D'.
ERROR: -2147199481
SOURCE: Merge Replication Provider
TEXT: The Merge Agent was unable to update information about the last synchronization at the Subscriber. Ensure that the subscription exists at the Subscriber, and restart the Merge Agent.
After I refresh the snaphot at the publisher, these errors disappear and the syncronization is completed without any problem. And I can sync easy again week or two..
What is the problem?
What is the right solution?
Yep, I can continue to refresh the snapshot each time when the error appears, but..
maybe there is another approach?
Thanks in advance!
Paul
View 1 Replies
View Related
Apr 21, 2008
During merge replication initialization from SQL Server 2005 to SQL Server CE 3.5 on Windows Mobile 5.0
I am getting the following errors:
On Device
{"The table name is not valid. [ Token line number (if known) = 1,Token line offset (if known) = 21,Table name = COLLECTION ]"}
base {System.SystemException}: {"The table name is not valid. [ Token line number (if known) = 1,Token line offset (if known) = 21,Table name = COLLECTION ]"}
HResult: -2147217900
Message: "The table name is not valid. [ Token line number (if known) = 1,Token line offset (if known) = 21,Table name = COLLECTION ]"
NativeError: 26100
Source: "Microsoft SQL Server Compact"
{System.Data.SqlServerCe.SqlCeError: The SQL statement failed to execute. If this occurred while using merge replication, this is an internal error. If this occurred while using RDA, then the SQL statement is invalid either on the PULL statement or on the SubmitSQL statement. [ SQL statement = ALTER TABLE [dbo].[COLLECTION] ADD CONSTRAINT [PK_COLLECTION] PRIMARY KEY CLUSTERED ( [SERIAL_NUMBER], [STORE_CODE], [COLLECT_DATE] )WITH PAD_INDEX , FILLFACTOR = 90 ]}
Source: "Microsoft SQL Server Compact"
Server Logged:
...
2008/04/20 20:03:16 Thread=EA0 RSCB=5 Command=SCHK Hr=00000000 SyncCheck responding 0
2008/04/20 20:03:17 Thread=B90 RSCB=5 Command=OPNR Hr=00000000 End Of Data Set 1
2008/04/20 20:03:17 Thread=B90 RSCB=5 Command=OPNR Hr=00000000 Responding to Fetch, bytes = 50259
2008/04/20 20:03:17 Thread=970 RSCB=5 Command=CLOS Hr=00000000 Total Compressed bytes out = 50259
2008/04/20 20:03:17 Thread=970 RSCB=5 Command=CLOS Hr=00000000 Total Uncompressed bytes out = 390254
2008/04/20 20:03:17 Thread=970 RSCB=5 Command=CLOS Hr=00000000 Removing this RSCB 0
2008/04/20 20:03:19 Hr=00000000 Compression Level set to 1
2008/04/20 20:03:19 Hr=80004005 ACK:Error for DistributorSessionID = 80
2008/04/20 20:03:19 Hr=80004005 The SQL statement failed to execute. If this occurred while using merge replication, this is an internal error. If this occurred while using RDA, then the SQL statement is invalid either on the PULL statement or on the SubmitSQL statement. [,,,SQL stateme 28560
The same tables in a different on a different SQL box (test) replicate fine, but on this box (production) they do not. Any idea what would be the difference in the two environments?
I suspect that the "dbo." part in the "alter table" is what it is messing up on... how can I tell SQL CE not to include that schema prefix?
Thanks
View 12 Replies
View Related
Dec 8, 2006
Suppose your using Merge Replication.
2 Users in 2 locations issue updates to the same table. 1 updating 1 column and the other updating another column. Now in reality the actual Stored Procedure issuing the update statement is passed in all the possible columns that could change and builds an update statement that updates all columns even the ones that havent changed.
Will this break Merge Replications conflict tracking? Or does SQL Server 2005 Merge Replication pickup that in reality the 2 updates only in reality changed the values in 2 columns.
View 1 Replies
View Related
Sep 6, 2007
Hi,
I was wondering if you can help.
In my vb.net form I am running a query to insert data from one database table to another.
However what I need to do is to be able is to add the id of a record I have just created to this insert into sql command.
I have managed to use @@ identity to get the id of my first sql insert statement
but I am wondering how I can use it in the second insert into and select statement. At the moment my sql statement just copies exactly what is in the select statement. I can't figure out how to add the @@identity value to my second sql statement.
My second sql statement is a follows:
sql2 = "INSERT INTO ProjectDeliveData(ProjId,ProjDeliveId,RoleId,MeasurementId,ProjDeliveValue, ProjDeliveComments,ProjDeliveYear,FinDataTypeId, FinFileId, ProjDeliveMonthFrom, ResourceId,ProjDeliveDateAdded)" & " select ProjId,ProjDeliveId,RoleId,MeasurementId,ProjDeliveValue, ProjDeliveComments,ProjDeliveYear,FinDataTypeId, FinFileId, ProjDeliveMonthFrom, ResourceId,ProjDeliveDateAdded from ProjectDeliveData where FinFileId=" & strActualFileId
I hope you can help
Cheers
Mark :)
View 7 Replies
View Related
Jul 15, 2007
In Transactional Replication -while Publisher, Distributer & Subscriber are on same instance- can I have additional columns in destination Table & set "Action if name is in use" for related Article to "Keep existing object unchanged"?
I do this but even Snapshot is not transfered to destination table!!
View 5 Replies
View Related
May 26, 2015
What is the main difference between snapshot and transactional and merge replication?
View 5 Replies
View Related
Aug 30, 2007
Hi all,
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I am using SQLSERVER 2005 (SP1).
View 3 Replies
View Related
Oct 9, 2007
I am working on bringing our disaster recovery site to be a live site. Currently we replicate to one of out servers (server B) with merge replication (from server A). Server A also does one way transactional replication form some table to several other servers including servers at the DR site.
This setup is not going to be fast enough for what we need so I am wondering if a table is receiving merge replication will the merge updates also replicate down the transaction path??
Example...
Server B update a row and merges to Server A. With this update them replicate (via transactional) to Server C??
thanks...
View 5 Replies
View Related
Sep 16, 2006
Hi,
I am planning to use transacational replication (instead of merge replication) on my SQL server 2000. My application is already live and is being used by real users.
How can I ensure that replicated data on different server would have exact same values of identity columns and date columns (where every I set default date to getdate())?
It is very important for me to have a mirror image of data (without using clustering servers).
Any help would be appreciated.
Thanks,
-Niraj
View 1 Replies
View Related
Jun 20, 2006
I have 2 columns 'Col1' (char) and 'Col2' (integer)
I'd like to combine these 2 columns and put the result in 'Col3' (char)
please help!!!
View 5 Replies
View Related
Jun 16, 2007
I want to combine a column with Id and other with Name.
For eg: If Id is 01 and Name is 'Tom', the output should be 01-Tom.
I am not able to execute it using || or CONCAT since Id has the data type int and Name is a string.
Do you have a solution?
`RG`
View 4 Replies
View Related
Dec 7, 2007
hi guys,
i have a table with 2 columns say:
First_Name Last_Name
David Reinjal
i need to merge these 2 columns and put into a single column with a ','(comma) seperated. it will look loke this:
column_name
David, Reinjal
how can i do this? can anybody help me in this?
thanks,
David
View 4 Replies
View Related
Aug 3, 2007
I have a column called email_address in table: mailing_list and another column called member_email in table: members and I want to do a SELECt to list the result of both columns in a new column
View 8 Replies
View Related
Feb 4, 2008
Hi!
I'm using IS with SQL Server 2005.
I need to know how to merge two columns (or more) into a single on as output.
For example:
#ID#Value1#Value2#
would be the input table. Now I want to map the column Value1 as 'Value' - as well as the column 'Value2' so there is only one output - and two rows generated by one row of the originate table.
I tried to map those columns to the same name, but IS refused that. My aim is to transform data from an old table to a new, relational one where all those values have to fit into relational tables (n:m relations).
How do I do that?
Thank you in advance!
View 3 Replies
View Related
Nov 7, 2006
Hello everybody!
I´m trying to put together two columns of integer into one. They are coming from the same source table, so the "merge"-Task doesn´t work. This is what they look like:
column1: <123>
column2: <0123456>
The result should be:
merged_column: <1230123456>
Is there a task for that kind of operation or do I have to write a script? I would like do do that within the data flow.
thanks in advance!
View 5 Replies
View Related
Jul 22, 2015
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3
**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
View 4 Replies
View Related
Nov 2, 2007
Hi..
is it possible to merge 2 columns into 1 to hold data like this... When the user imports the file in particular file they will be
ACT_ID1 Tot_ACT1 ACT_ID2 TOT_ACT2 ...... until 15
BB 1245.45 CT some amount .....
The 2 letter character may change prob for each file.. at leat i know of somethem may change
So while i transfer the data to the production database can is it possible to do some thing like
COL1 BB 1245.45
COL2 CT 12456.12 etc..
Any help will be appreciated.
Regards
Karen
View 5 Replies
View Related
Feb 14, 2002
Hi everbody,
I setup the Merge Replication , it is working perfectly. But i have one problem now it is updating both ways. I nedd one way. Any body tell me which parameter i have to change.
Thanks in advance
View 1 Replies
View Related
