Address Field Problem.

Jan 19, 2007

I have a number of text boxes (one on top of the other) to display the addresses in my report. I have Address_name, Address1, Address2, Address_city, Address_State, Address_PostalCode - Each with its own text box except for the city, state, and postal code for which I just combined the fields. However, I have many who do not have any data for Address2 and don't want an empty line in the address. Is there an expression I can use to display the next line or move/shift up the remaining parts of the address? Would the iif and isnothing expressions be helpful, and if so, how do I write it correctly?

View 4 Replies

Split Address Into Multiple Field

Aug 3, 2006

i want to write a code that can split the addresses into multiple fields. anyone can point me out where to start?

lets say i have "12 north plaza boulevard apt.16" and i want it to become:

address_number
12

suffixA
North

street_name
plaza blvd

suffixb
apt16

View 1 Replies View Related

Sorting Address Field By Its Component Parts

Nov 14, 2007

The file of about 30,000 records contains an address field where addresses are entered in the following form:

128 NW 8 ST
3444 SW 19 AVE
32 SE 122 TERR
12604 SW 148 PL

Then there are anomalies such as
123 E BLVD
(I can ignore the anomalies until the main challenge is overcome.)

The challenge is that I have been asked to sort the addresses in the following order:

quadrant (e.g., NW, SW),
street number (e.g., 122),
street name (e.g., TERR)
house number (e.g., 128)

It seemed like I should create a view that can be updated regularly, as records will be added/deleted ongoing.

How do I get these part into a four-column view? Or, is there another way to do this?

Esther

View 2 Replies View Related

SQL Server 2008 :: Add Carriage Return To A Full Address Field

Apr 16, 2015

I'm pulling individual address fields into my script, some of which are null.

I would like to add in a carriage return after ONLY those fields that are NOT NULL.

Current script is:

SELECT
ISNULL(SAD.HOUSENUMBER,'') + ISNULL(SAD.ADDRESS1,'') + ISNULL(SAD.ADDRESS2,'') + ISNULL(SAD.ADDRESS3,'') + ISNULL(SAD.CITY,'') + ISNULL(SAD.COUNTRY,'') + ISNULL(SAD.ZIP,'') as 'FULL_ADDRESS'
FROM
SFAADDRESS SAD

View 5 Replies View Related

Transact SQL :: Return Field When A Field Contains Text From Another Field

Aug 25, 2015

I'm new to SQL and I'm trying to write a statement to satisfy the following:

If [Field1] contains text from [Field2] then return [Field3] as [Field4].

I had two tables where there were no matching keys. I did a cross apply and am now trying to parse out the description to build the key.

View 8 Replies View Related

How To Add Date Field And Time Field (not Datetime Field )

May 4, 2006

Good morning...

I begin with SQL, I would like to add a field that will be date like 21/01/2000.

Actually i find just "datetime" format but give me the format 21/01/2000 01:01:20.

How to do for having date and time in two different field.

Sorry for my english....

Cordially

A newbie

View 3 Replies View Related

IP Address

Feb 27, 2008

Hi All
I want to know that if different users have access to a database with same loginName and password then how can I get the IP address of a particular user through a query.
Thanks in advance Anisha

View 1 Replies View Related

IP Address

Sep 13, 2000

Does anyone know how to get the machine IP address from a Transact-SQL statement ?
Eyal

View 1 Replies View Related

FTP To Another Address

Dec 14, 2004

Hi,

I am making a DTS package and would like to:

1) create a file then,
2) transfer this file to another location(not on the same server).

How would i do the ftp part ?

The file transfer protocol task only lets u download from another site; how would i upload a file to another site ?

thanks.
Clayton

View 4 Replies View Related

Mac Address

May 4, 2006

Hello,I want to block certain mac address to access my MS-SQL server. for that what can i do. for exampleI want to block the mac address [abc]. how is it possible to block the mac address [abc]

View 2 Replies View Related

IP Address

Feb 27, 2008

Hi all

I want to know that if different users have access to a database with same loginName and password then how can I get the IP address of a particular user through a query.

Thanks in advance

Anisha

View 2 Replies View Related

Non-US Address

Aug 2, 2005

Someone told me that some non-US address do not have State/Province, andsome might not have Postal Code. Is this true?

View 3 Replies View Related

SQL Address

Sep 24, 2006

Hi All,We have an MS SQL server that is within the company firewall. We want aparticular database to be availabe to a vendor to build a website.When we had to develop a website on another vendors machine they gaveus following details.SQL Address: testdata.data.comSQL Port: 1234SQL testUsr Password: testPassword1. How do we go about doing this?*******The SQL Server has 5 other databses. I have already created a databaseuser for just that database.2. So If the vendor registers their enterprise manager with ourinformation, can I make them see only their database? Or does all theother database also get displayed. They are not able to access anyinformation on the other databases. But they can see it.Is it possible to prevent them from seeing the other databases?Tx in advance

View 1 Replies View Related

Address Standardization

Jun 19, 2006

Ok...I'm sick of this.

I'm migrating data from three (third-party, propietary) systems that my company has been using into one common system. The problem with this is that address information in these systems is about as standardized as a bag of rocks. One product simply has 6 address lines, and does not segregate the information (city, state, zip, etc...). Another one has dedicated lines, but users have taken it upon themselves to "invent" ways to enter data (international customers/vendors have data in weird fields, but no rhyme, reason, or cohesion to the madness). The third one is just as bad.

I'm looking for a script-based, SQL implemenation (stored procedures?) for standardizing the addresses into a common format. Does anyone know of anything?

View 4 Replies View Related

IP Address Or MacAddress

Feb 15, 2005

Hi
I want to know that is there a system sp or table or somewhere in sql server that I can get ip address or mac address of clients that connect to sql server?
thanx

View 1 Replies View Related

Drop The End Of An Ip Address

Mar 7, 2006

does anyone know how to drop the last part of an ip address? I've been searching various sites for string functions and havn't come up with anything that works. What I want is something that will "find the third occurance of a "." and then return everything to the left of it"

I've tried various types of InStr and even found a SUBSTRING_INDEX function, but apparently it's only for mysql.

i'm using sql server and linking tables thru access

fisk

View 11 Replies View Related

Parse IP Address

Jul 4, 2007

I am fairly new to SQL and am trying to write a function to parse the ip address into 4 sections. I have been searching through the forums to see if anyone has a posted example of parsing an ip address but could not find one.

I am wondering what would be the best method of doing this, or if anyone has an example.

Thank you

View 6 Replies View Related

How To Get The Client IP Address In T-SQL ?

Oct 24, 2007

Hi,

My problem is -
I have a trigger for auditing the changes(insert/update/delete) in the database table.That is done and is working fine. But I need to have the client's IP address from where the changes are done. That I need in T-SQL, that means, not in any web form but in the SQL/T-SQL.

As I have checked many forums, I got that there is extended stored procedure in master database named xp_cmdshell which has xplog70.dll and when we execute this stored procedure with 'ipconfig' we can get the IP Address. But I do not need that in master database. I need that in my database say myDB.

So how to proceed further. I don't know whether to create extended SP which contains DLL or is there any other option.

Pls help
Thanks in advance

View 14 Replies View Related

Parsing Address

Feb 13, 2004

Parsing Address
This is not really a reply, but I saw the problem and the replies look very promissing.
I'm using ss2k, I have a table with an address column.
here is some example of the records under ADDRESS :

WILLOW CREEK PL
RED BARN DR
RED BARN DR
CARRINGTON DR
RENNER RD
EDMONTON CT
SPRINGBRANCH DR
HILLROSE DR
CEDAR RIDGE DR
LARTAN TRL
PRESIDENT GEORGE BUSH HWY

What I want to do is to write script that runs daily and parse the street names (RED BARN) and street types (Dr, PL , etc.. ) to 2 colums. As u can see there is no fixed length or fixed number of words ...etc ...
Any help would be really appreciated.
thnks

View 3 Replies View Related

Company - Address

Apr 17, 2004

I need some help devising my tables.

I have a company table and a address table. I have created a linked table with two foreign keys from the company table and the address table respectively.

This set up allows me to apply more than one address per company which is fine. My problem is that I need a way to prevent a company from entering exactly the same address twice.

In the address table i have the following fields:

AddressKey - PK
CompanyKey - FK
Address 1 - 3
Town
County
Country
PostCode

In the company table I have the following fields.

CompanyKey - PK
FirstName
Secondname

And finally in the link table I have the following:

CompanyKey - FK
AddressKey - FK.

Now, if i entered the following into the address table Assuming that company id of 1 was already entered into the company table.

AddressKey - 1, CompanyKey = 1, Address1 = 11 Address2= Taylor

I need a way of preventing this from happening.

AddressKey - 2, CompanyKey = 1, Address1 = 11 Address2= Taylor

As can be seen the PK - FK values are unique and are correct for referential integrity, but the actual address is the same.

Any help we be mostly appreciated.

Cheers

Wayne

View 13 Replies View Related

Select Address

Aug 4, 2006

1A apple street
11 apple street
1B apple street

i want to select only the first address. how do i do it?

View 8 Replies View Related

MAC Address Attribute

Aug 10, 2005

Hi:I need to store MAC Addresses. What is the standard way of storing thistype of attribute? Datatype? I can't find any discussions about thisanywhere.Thx for any pointers.

View 1 Replies View Related

Using OPENROWSET With An IP Address

Jan 11, 2007

Hi

I've got an openrowset query that works perfectly if I enter the computer name, but it fails when I enter the IP address.

Is there a setting somewhere that I need to enable to make this happen?

Thanks in advance

View 5 Replies View Related

Use OPENROWSET With Web Address?

Aug 28, 2006

I have an excel file on a web server on a different location to the sql server. I want to use OPENROWSET to query the excel file, but it doesn't seem to like using a URL.

Is this the case, or am I doing it wrong? Works fine when I use a local address (eg c:excelfile.xls) when testing locally, but I need to use a URL in production.

SELECT * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0','Excel 8.0;Database=http://mydot.com/excelfile.xls','SELECT * FROM [page1$]')

View 1 Replies View Related

Local IP Address....

Jan 29, 2008

Hi guys.

i know the funcation that v can use to get the local Machine Name '@@server' , it's return the server name
is it' possible that or is there any way to get the IP address of the Machine..

Thanks and looking forwrad.
-MALIK

View 3 Replies View Related

Will MS Address SSIS?

Aug 29, 2006

Whoever implemented this... needs fired. If its not done fine.

But its still pretty much unusable.

I have a simple 5 text files I need to import... no brainer, they are all comma delimeted.

Works great in 2000 DTS. I import the package it blows up, will take me hours to get right "Converting" all the columns. These are simple text fields, ive learned not to even attempt anything else.

Are they basically "done" with SSIS? And just letting us wade through the horror that is SSIS?

I am pondering creating a dw but with all my diverse data sources I couldnt dream of the endless hours upon hours i would have to spend to get it to work with SSIS.

Or maybe someone can explain to me how to easily turn off these stupid trucation, conversion errors it is determined to force upon my dts packages.

Uhg, about to uninstall 2005 and go back to 2000... I can't schedule a "legacy" dts package to run on sql2005 without the nightmare of "dtsrun"...

View 4 Replies View Related

Dont Display Address If Its Not There!

Jul 28, 2007

hi there, i have a invoice template that when printed has a box for the users address (which there always will be) and a box for their delivery address if they are having the items delivered. However sometimes they dont have things delivered and so the record in the delivery table does not exist. In this case it will throw an error, how can i avoid this. the code im using i have posted below string sql = "SELECT [del_address], [del_post_code], [del_date], [del_time] From tbl_del WHERE order_ID = " + intOrderID;

//This creates a sql command which executes the sql statement.SqlCommand sqlCmd = new SqlCommand(sql, myConn);
myConn.Open();SqlDataReader dr = sqlCmd.ExecuteReader();
//This reads the first result from the sqlReader
dr.Read();
try
{

//string strDel_Address = dr["del_address"].ToString();
if (Convert.ToString(dr["del_charge"].ToString()) != null)
{
//delivery items lblDelAddy.Text = dr["del_address"].ToString();
lblDelPCode.Text = dr["del_post_code"].ToString();

View 3 Replies View Related

Ban IP Address After 5 Wrong Attempts To Log In

Jan 22, 2008

Does somebody know if it's possible to ban an IP address in the sql server, from somebody who makes 5 attempts to log in ?
Because I saw in my computer management / windows logs / application that somebody is trying to guess the password of 'sa'. Every second I get 5 attempts to login ...

regards

View 3 Replies View Related

Normalizing Address Information...

Dec 27, 2003

THE LAYOUT:
I have two tables: "Applicant_T" and "StreetSuffix_T"

The "Applicant_T" table contains fields for the applicant's current address, previous address and employer address. Each address is broken up into parts (i.e., street number, street name, street suffix, etc.). For this discussion, I will focus on the street suffix. For each of the addresses, I have a street suffix field as follows:

[Applicant_T]
CurrSuffix
PrevSuffix
EmpSuffix

The "StreetSuffix_T" table contains the postal service approved street suffix names. There are two fields as follows:

[StreetSuffix_T]
SuffixID <-----this is the primary key
Name

For each of the addresses in the Applicant_T table, I input the SuffixID of the StreetSuffix_T table.

THE PROBLEM:
I have never created a view that would require the primary key of one table to be associated with multiple fields of another table (i.e., SuffixID-->CurrSuffix, SuffixID-->PrevSuffix, SuffixID-->EmpSuffix). I want to create a view of the Applicant_T table that will show the suffix name from the StreetSuffix_T table for each of the suffix fields in the Applicant_T table. How is this done?

View 6 Replies View Related

Company With Address Question

Mar 18, 2004

I have a database that allows a client to have multiple addresses, could be a home, business, vacation, etc... I'm trying to deside if I should put the Company Name and Title fileds in the tblClientAddresses table or keep it with the tblClient table. We do mailings to clients and if the mail is going to a home address the company and title should be excluded. If I put them in the tblClients table I really have no way of knowing if we are mailing to a home or a company. If i put the company and title with the address it makes sence that this would solve the issue.

Looking for any thoughts or suggestions?

Thank you,

View 2 Replies View Related

Ip Address Change On SQL 7.0 Server

Aug 21, 2002

Currently running SQL Server 7.0 on numerous Windows NT 4.0 SP6 servers.

Need to change the IP address of these servers to a private scheme.

What effect will this have on SQL Server 7.0

Thanks

View 1 Replies View Related

Changing The Server Name An IP Address

Nov 2, 1999

I have SQL ver 7.0 running on NT ver 4.0 sp5

I had to change the name of the server from server1 to server2
now I am Getting a message

"Your SQL server installation is either corrupt or has been tampered with (Unknown package id). Please rerun setup"

is there any other way besides rerunning setup ?

Thanks in Advance ??

Peter

View 2 Replies View Related

The IP Address Of Our SQL Server Is To Be Changed

Apr 22, 2003

Hello,

Soon, we are going to redesign our servers and their positioning insofar as web access is concerned. The SQL Server will go to a DMZ.

Its IP Address (as well as hostname) is to be changed. Can you offer suggestions about what to be aware of on these two items?

I've been involved in a hostname change befoew (and, it's a pain), but never an IP Address.
Thanks, MichaelG

View 2 Replies View Related