I know that SQL2000 can utilize AWE to address more that 2GB of available application addressable RAM, however, I'm not sure how much memory SQL7 can support. BOL hints that SQL7 does take advantage of the /3GB boot.ini switch in W2K and NT4AS. However, no reference so far illuminates the functional enhancements and possible tradeoffs that this change may provide.
Thanks,
Meg
Just two questions actually. We have built a ColdFusion based forums package. Currently we have it on two beta sites, and we are usin sql 7 for the db. Firstly the forums are serving 200-300 people at any given time, about 16,000 unique people a day. SQL & seems to stay at around 50% cpu usage on a dual p3 with 512mb ram. Is that normal? Seems like alot of cpu usage. The other thing is it takes 500mb of ram and just about drains the server of all of its ram even though in the memory properties for the sql server its set to 255mb maximum. Any insight is appreciated.
View 2 Replies View RelatedHello,
I have been trying to find out what the maximum memory we can have on SQL7 standard edition server. Have not been able to find it anywhere...
Anuy ideas would be greately appreciated.
TIA
B.
Could anyone inform me how much the conventional memory SQL7 Enterprise on Advanced Server 2000 can have?
The SQL is on an active/active cluster. Currently each runs at 2GB of memory, with available memory for failover. I am planning to add another 2GB to each SQL node. Is this possible? Are there any configurations I need to do? Do I need to set AWE enabled? and How much?
Your help is greatly appreciate.
Jim
How can I copy a SQL 7 database from one server to another? Please tell me all the ways because I've tried the obvious and it doesn't work. (backup and restore - won't go from one server to another, DTS transfer object Wizard - does a whole pile of errors and doesn't do stored proceedures and trigures). Thanks for help in advance. Also, what is the email address to post to the listserv and where is the FAQ for SQL7? Most of my listserv's tell you where to post right at the bottom of the digest I get - any chance you guys would do that with this list? Thanks again.
View 6 Replies View RelatedI am looking to test this feature - and the "Transaction Performance Collector" has recommended me a table to port to In-Memory OLTP.
I have now tried the "Table Memory Optimization Advisor" tool.
After a couple of tweaks to the table design - the tool is now passing validation but the tool is not allowing to progress to the next step:
Could it be down to not having enough memory? But would this not show in the advisor?
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets()
at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate()
at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
I've been researching AWE to determine if we should enable this for our environment.
Currently we have a quad core box with 4 gb of RAM (VMware). OS: Windows 2003 std, SQL Server 2005 std. 3GB is not set but will be as soon as we can perform maintenance on the server.
I have read mixed feedback on AWE, either it works great or grinds you to a hault. I would assume that the grinding to a hault is due to not setting the min/max values correctly or not enabling the lock page in memory setting.
We only have one instance of SQL on the server and this box won't be used for anything else aside from hosting SQL services. We do plan on running SSRS off of this server as well.
1. Will running SSRS and enabling AWE cause me problems? Will I have to reduce the max setting by the SSRS memory usage or will it share and play nice?
2. How do I go about setting the Max value? Should it be less than the physical RAM in the box? Right now its set to the default of 214748364, even if I don't enable AWE should this default value be changed?
3. It seems that even at idle the SQL server holds a lot of memory and the page file grows. If I restart the process in the morning, memory usage in taskmon is at 600mb or so. By the end of the day, its up around 2gb. How can I track down whats causing this, should this even concern me?
4. The lock Page in memory setting worries me. Everything I've read on this seems to give a warning about serious OS and other program support degradation. In some cases to the point where they have to restore the settings on the server before they can bring it back up. What are your thoughts on this.
I have a Windows sever 2012 with sql server 2012 enterprise. Ram size is 22GB. Sometimes SQL sever takes 95% memory.My question, How to reduce memory size without killing any process because it's production server.So there are many background process is running. And,Is there any guides to learn why Memory is raise d so high and how to reduce it.
View 10 Replies View RelatedHello, I understand that we should use SSMS -> Server Properties -> Memory to put a cap on the SQL server memory usage, therefore it gives some space memory for OS, this is based on the fact if the max memory is not specified, SQL will use whatever available memory and eventually crash the system.
My question is that when a server has SSIS and SSAS services installed along with the SQL service. Would the max memory setting covers the SSIS and SSAS memory usage, or the SSIS and SSAS has to shared the memory with OS?
Thanks,
fshguo.
I am running Visual Studio 2005. I have an SSIS Package which is consuming a huge amount of memory. During the execution of the package the memory keeps increasing. Until finally i get an Out of Memory exception. I have run this package using dtexec, and in the BIDS. No difference. I do have some script components and have added some code to get the assemblies in the current appdomain. I do see that one particular assembly is increasing on every loop. VBAssembly every time it hits the script component is increasing by 6, and along with it the memory is climbing. What is this VBAssembly being used for is there an update to SQL Server Integration Services that I need?
Thanks! Aaron B.
sql server 2000 is running on windows server 2003 ... 4gb of memory on server .... 2003 was allocated 2.3gb nd sql server was allocated (and using all of it) 1.6gb for total of approx 4gb based on idera monitor software ... all memory allocated betweeen the OS and sql server .... then 4 more gb of memory added for total now of 8g ... now idera monitor shows 1.7gb for OS and 1.0 gb for sql server ..... 'system' info shows 8gb memory with PAE ... so I assume that the full 8gb can now be addressed .... why are less resources being used now with more total memory .... especially sql server ..... i thought about specifying a minimum memmry for sql server but i amnot convinced that would even work since it seems that this 1gb limit is artificial .... it it used 1.6 gb before why would it not use at least that much now ??
thank you
i want to create a lot of index for my database for performance.but i need find memory usage by indexes.
How to find memory usage by index in sql server?
I've a database with a memory optimized filegroup on it. How can I remove it?I have removed the memory optimized table I had on it, but when I try to remove the filegroup I receive an error.
View 12 Replies View RelatedHi,
I am going to install SQL Server 2000 (then SQL 2K5) on a Win Server 2K3 with 8 GB of ram, but it will be 16 GB in the near future.
I would like to reserve a fixed memory (for momemt less than 3-4 GB) for SQL Server and the rest for application (virtualization).
Without AWE enabled, max memory for SQL Server 2K5 is 4GB as for SQL Server 2000?
How can I manage and optimize memory keeping in mind AWE. (any doc, website available?)
Thank
So I started a new job recently and have noticed a few strange configurations. Typically I would never mess with min memory per query option and index create memory option configuration because i just haven't seen any need to. My typical thought is that if it isn't broke... They have been modified on every single server in my environment.
From Books Online:
• This option is an advanced option and should be changed only by an experienced database administrator or certified SQL Server technician.
• The index create memory option is self-configuring and usually works without requiring adjustment. However, if you experience difficulties creating indexes, consider increasing the value of this option from its run value.
Hello frnds Can Anybody explai what does it mean by question itself and how to resole it ?
View 2 Replies View RelatedHi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
Hi there,
After installing SP2 we encounter a problem with MMC. When selecting a DB we recieve a RunTime error? And the DB items/properties are not shown.
Is there anyone with the same problem and knows how to fix this? I search the MS site for more information but there is nothing on it.
Danny
Is MS SQL 7.0 have any difference/incompatibility problem with the BackOffice's SQL 7.0?
anybody can clarify this to me please... tq!
Hi~, I have 3 questions about memory based bulk copy.
1. What is the limitation count of IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit(true)?
For example, how much insert row at below sample?(the max value of nCount)
for(i=0 ; i<nCount ; i++)
{
pIFastLoad->InsertRow(hAccessor, (void*)(&BulkData));
}
2. In above code sample, isn't there method of inserting prepared array at once directly(BulkData array, not for loop)
3. In OLE DB memory based bulk copy, what is the equivalent of below's T-SQL bulk copy option ?
BULK INSERT database_name.schema_name.table_name FROM 'data_file' WITH (ROWS_PER_BATCH = rows_per_batch, TABLOCK);
-------------------------------------------------------
My solution is like this. Is it correct?
// CoCreateInstance(...);
// Data source
// Create session
m_TableID.uName.pwszName = m_wszTableName;
m_TableID.eKind = DBKIND_NAME;
DBPROP rgProps[1];
DBPROPSET PropSet[1];
rgProps[0].dwOptions = DBPROPOPTIONS_REQUIRED;
rgProps[0].colid = DB_NULLID;
rgProps[0].vValue.vt = VT_BSTR;
rgProps[0].dwPropertyID = SSPROP_FASTLOADOPTIONS;
rgProps[0].vValue.bstrVal = L"ROWS_PER_BATCH = 10000,TABLOCK";
PropSet[0].rgProperties = rgProps;
PropSet[0].cProperties = 1;
PropSet[0].guidPropertySet = DBPROPSET_SQLSERVERROWSET;
if(m_pIOpenRowset)
{
if(FAILED(m_pIOpenRowset->OpenRowset(NULL,&m_TableID,NULL,IID_IRowsetFastLoad,1,PropSet,(LPUNKNOWN*)&m_pIRowsetFastLoad)))
{
return FALSE;
}
}
else
{
return FALSE;
}
I am going to install SQL7.0 on the current NT4.0 with SQL6.5 on it by uninstalling SQL6.5 first and then installing (not upgrading through Wizard) SQL7.0.
Here are the questions I need help with:
1. Should I convert the database after the installation of SQL7.0 or directly restore the SQL6.5 databases backup?
2. If I need to convert the databases, How and in what way?
3. Which way is better upgrade or installation?
Thank you ahead of time
John
I am looking for documentation/information on how to configure SQL7 so that I
can use SMTP for delivering e-mail.
I have other applications which use SMTP for delivering our e-mail.
I don't have Exchange. Internally we use GroupWise for our mail system.
Thanks in advance!!!
Current system 2 x 500mhz pIII 512MB ram, System mirrored and data raid 5 30GB made from 3 disks. All server is running in CA TNG. an Asset management DB and Software Delivery database. But the poor server runns most of the time at 100% 65% being used by SqlServer process. Does/Can anyone recommend any tweaks upgrades that may let the server take a breath in and out ie will more memory speed thing up faster processors or more disk.
Thanks
Nigel
Hi,
i'm brand new in the sql server world so maby this is an easy problem.
I have to get data from AS/400 to SQL7. I've created a package with a client acces odbc driver and an sql driver which transfers the data of an entire table. When i execute this it works fine.
Now i want to shedule this (shedule package). When i start this job it doesn't work.
This is the error i get:
DTSRun: Loading... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147008507 (80074005) Error string: Unspecified error Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 1100 Error Detail Records: Error: -2147008507 (80074005); Provider Error: 0 (0) Error string: Unspecified error Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 1100 Error: -2147467259 (80004005); Provider Error: 5 (5) Error string: [IBM][Client Access ODBC Driver (32-bit)][DB2/400 SQL]Communication link failure. COMM RC=0x5 Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 DTSRun: Package execution complete. Process Exit Code 1. The step failed.
on the server i've installed client access as well and created the same odbc driver (with the same name). But it still doesn't work.
Can anybody help me please??
I have a database on a 6.5 server but wish to upgrade this database to a sql 7 database. But I would like to test this first on another server which is a sql 7 server. Is it possible to restore a 6.5 backup to a SQL server 7.0 server?
Thanks in advance..
Is there a way to list all the tables in each of the filegroup
in a database. I have a database with 7 filegroups and would like
to have a list of tables in each filegroup
Sp_helpfilegroup gives you list of filegroups and the names of files
hai,
i unable to import/export from sql7.0 database to text file in windows 98 system . can anybody help me ?
I recall seeing something about an extra / additional / enhanced / second version of Help that is available after installing SQL7 SP2. Does anyone know anything about it, such as where to find it? Thanks.
View 1 Replies View RelatedI need some documentation on how to trouble shoot clustering SQL7EE. I have setup the cluster and looks like it is working but I missed somthing. When I test a failover by pulling the Network cable to the main network not the heartbeat network both boxes lock up. I can failover by powering down one box and using the MSCluster Admin. I am using NT40 6a on Dell PowerEdge 2400 and PowerValut 211s
View 3 Replies View RelatedHi folks. Got a real doozy going. One of the network techs reinstalled NT4 SP5 on a server. This reverted the SQL driver back to 2.something. Now sqlserveragent jobs will not run.
I have tried to instal MDAC 2.5, but it doesn't change the driver up to the new 3.xxx driver. I searched around on here and folks said that you have to move the MDAC executable to a new directory. for the new MDAC I don't see MDAC.EXE. I did find MDAC.COM and renamed that. Tried to rerun MDAC 2.5 but still got the old SQLSRV32.Dll.
Uninstalled SQLServer and reinstalled. still got the old SQLSRV32.Dll.
Tried to apply SQLServer SP1. It died.
Found that I am to shutdown some services. Did that. SP1 still dies.
Tried to apply SQLSERVER SP2. It tries to pick up where it died and it dies again.
SO, I'm currently uninstalling SQLServer, reboot, installing SQLServer, reboot, Trying SP2 again.
Didn't think that it was brain surgery just to install a new flippin version of the ODBC driver.. SHEEZ!!!!
Does anyone know of a sp similar to sp_helprevdatabase (SQL 6.5) for SQL 7.0? Will I need to use SQLDMO or can I use DTS somehow.
Thnxs.
I am using ASPs in my VB6 script to call an SQL 7 database. What security issues shd be considered? How will the IIS security be handled with NT4 & SQL7 security?
Any suggestions wld be highly appreciated!
Thanks in advance!
Adie