AdjustTokenPrivileges Failed After Memory Usage Spikes To 2.75GB
Nov 27, 2007
We have an SSIS package which loads data from Sybase to SQL2005 64-bit, using OLEDB to connect to Sybase, and SQL Server Destination to connect to SQL2005 64-bit.
Our SQL2005 64-bit server runs both the database server as well as Integration Services.
When we kick off the package using dtexec /sql "package name here", some of the data flows complete successfully, but the 2 large data loads (750K rows each) never complete successfully. When the memory usage of DTExec reaches approximately 2.75GB, a console window pops up momentarily reporting "AdjustTokenPriveleges failed", and the SSIS package execution stops.
Thinking this may have something to do with memory issues, I verified that upon SQL startup, it correctly reports "Using locked pages for buffer pool". I also granted the "Lock pages in memory" privilege to the user account running the DTExec command. We've also tried changing the target of the package to use OLEDB instead of SQL Server Destination. However, none of these seem to have fixed the problem.
Can anybody suggest what can be done to fix this?
View 2 Replies
ADVERTISEMENT
Nov 16, 2006
I have an SSIS package that parses a text file into 3 smaller text files and then takes the data and puts it into tables. The package runs fine up to the point where it needs to insert the data. I turned logging on but no errors are generated. But I do get a file named SQLDUMPER_ERRORLOG.log that is generated with the info below. Any ideas of where to look??
11/16/06 13:31:38, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters:
4 supplied
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID =
1844
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags
= 0x0
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr =
0x0100C5D0
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir =
<NULL>
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr =
0x00000000
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile =
<NULL>
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName =
<NULL>
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName =
<NULL>
11/16/06 13:31:38, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump
completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0033.mdmp
11/16/06 13:31:43, ACTION, DtsDebugHost.exe, Watson Invoke: No
11/16/06 13:31:43, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters:
4 supplied
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID =
1844
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags
= 0x0
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr =
0x0100C5D0
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir =
<NULL>
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr =
0x00000000
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile =
<NULL>
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName =
<NULL>
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName =
<NULL>
11/16/06 13:31:43, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
11/16/06 13:31:44, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpWriteDump
() Failed 0x80070005 - Access is denied.
11/16/06 13:31:44, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Watson Invoke: No
View 3 Replies
View Related
May 19, 2008
Hi all,
On our production server once in a while i found the following dump:
---> SQLDump0005.log
Using 'dbghelp.dll' version '4.0.5'
2008-05-14 06:33:28.65 Server **Dump thread - spid = 0, PSS = 0x0000000000000000, EC = 0x0000000000000000
2008-05-14 06:33:28.67 Server ***Stack Dump being sent to E:Microsoft SQL ServerMSSQL.1MSSQLLOGSQLDump0005.txt
2008-05-14 06:33:28.67 Server * *******************************************************************************
2008-05-14 06:33:28.67 Server *
2008-05-14 06:33:28.67 Server * BEGIN STACK DUMP:
2008-05-14 06:33:28.67 Server * 05/14/08 06:33:28 spid 0
2008-05-14 06:33:28.67 Server *
2008-05-14 06:33:28.67 Server * Non-yielding Resource Monitor
2008-05-14 06:33:28.67 Server *
2008-05-14 06:33:28.67 Server * *******************************************************************************
2008-05-14 06:33:28.67 Server * -------------------------------------------------------------------------------
2008-05-14 06:33:28.67 Server * Short Stack Dump
2008-05-14 06:33:28.88 Server Stack Signature for the dump is 0x00000000000003F3
---> sqldumper_errorlog.log
05/14/08 06:33:30, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 4784
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x00000000031421E8
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x0000000000000000
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x0000000000000000
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Dump is associated with file E:Microsoft SQL ServerMSSQL.1MSSQLLOGSQLDump0005.txt
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
05/14/08 06:33:30, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used
05/14/08 06:33:32, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
05/14/08 06:33:32, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: E:Microsoft SQL ServerMSSQL.1MSSQLLOGSQLDump0005.mdmp
05/14/08 06:33:32, ACTION, sqlservr.exe, Watson Invoke: No
Looks like there is some missing user privilege in group policy for sql server service account (not local admin) ??
Does any1 can shine some light.
Help is highly appreciated.
TIA
acki4711
View 5 Replies
View Related
Nov 2, 2007
I have a client program that writes to sql server database 10 records per second . i want to compute the CPU usage and the memory usage for the whole program or CPU usage,memory usage for the insert statement in the program .
Can anybody help me with this?
View 6 Replies
View Related
Aug 28, 2015
I have a Windows sever 2012 with sql server 2012 enterprise. Ram size is 22GB. Sometimes SQL sever takes 95% memory.My question, How to reduce memory size without killing any process because it's production server.So there are many background process is running. And,Is there any guides to learn why Memory is raise d so high and how to reduce it.
View 10 Replies
View Related
Oct 4, 2015
i want to create a lot of index for my database for performance.but i need find memory usage by indexes.
How to find memory usage by index in sql server?
View 9 Replies
View Related
Jan 30, 2014
providing a query for fetching the data for CPU Usage, Memory usage, blocking and all details ...
I want to create a job which will run on a Node every 15 min and store data in a table for each instance...
DMV is not giving more stuff and xtended events not sure if i can store that data into a table?
View 7 Replies
View Related
Mar 26, 2008
Good day to all,
I'm new here, so I don't know if this is the right forum to post my problem. I have a web application written using C# .net 2005 (W/ajax). The application has a module that uploads data from excel file to the sql server 2005 database. w/c is by the way, i'm using SQL 2005 Express Edition, the app can upload up to more than 10,000 records from an excel file. Everything is ok until it was deployed in a test environment, while having a run through with the system, the application encounter an error after which, we cannot log in to the system anymore. I restarted the server (web and sql server in 1 machine running winxp) then I can log-in again in the system. When I'm tracing where the problem came from, I noticed that the memory usage of sqlservr.exe increases everytime the app connects to the server. I already fix some code to close some objects that might have caused the high memory usage, then I run sp_who in the management studio and there are still connections used by the app AWAITING COMMAND. Then I manually kill (using kill spid) connection that are left opened by the application. But the mem usage of sqlservr did no decrease. Is there a way to release the memory usage of sqlservr.exe? In ASP.Net ? I have a hint that this has been causing the error. Thanks a lot.
View 4 Replies
View Related
Nov 25, 2001
Hi,
it seems that every day SQL Server 2000 has some kind of memory leak,
the memory usage creeps above 150000 approximately 3 times per day. Is this normal? It starts at about 13000.
Is there any way that I can monitor what is causing the memory usage to be so high and maybe rectify it?
Thanks for the help.
Steve
View 1 Replies
View Related
Jul 7, 2006
I was on my friend's server earlier and I checked his system stats. Between sqlservr.exe and msftesql.exe he was using 2.9gb of ram. This is not a high traffic server so I felt that was just a wee bit high. What are some usage experiences you have seen? I have not worked with 2005 so I don't know what the usage should be like for a low to medium usage server. The guy that admins the db is kinda a moron anyway. He said he has said to the server admin it has been optimized, but I dont believe it one bit at 2.9gb of usage. Any comments would help.
Pete
View 3 Replies
View Related
Sep 18, 2007
Hello,
I need to know which of the following two methods do need less RAM.
There are 2 big tables, each about 9 M rows, and 6 small dimension tables with each about 10 to 100 Rows. The dimension tables are joined by their id's with one of the big table.
The Structure of a dimension Table looks like
CarID (tinyint), Description (varchar(20))
1 BMW
2 Porsche
I want to join the 2 Big Tables in a materialized view. Later i will run queries like
select * into #temp from dbo.vw_materialized_view where Car = 'BMW'
So, back to my question, will such a query take less memory (ram) when i joined all 8 tables before I created the mat. view or will it take less when I only join the 2 big tables in a mat.view and later join the mat.view with the 6 dimension tables?
Hope you got that ;-)
Thank you
View 1 Replies
View Related
Jan 13, 2004
Can some one tell me where can I get the CPU and Memory Usage of my server on the Sql Tables or a script or store proc that i could run to get the above. I need that and to store its results in history to show how are our servers perfoming
View 8 Replies
View Related
Jun 16, 2008
Hello, I have SQL Server 2005 64 bit on Windows Server 2003 Enterprise 64 bit on a server with 8GB of RAM
Task Manager reports the process sqlserver.exe consuming 7GB of memory
Is this normal ?
View 7 Replies
View Related
Feb 1, 2007
how to check the memory usage other than performance monitor for the server?
When I execute the SP_WHO2 on the server, it showing each user have 5 connections there and the status is sleep. what is that means?
Does it takes up memory?
why have so many connection or entries for the same user, they all are using the same db with same application.
Thanks!
View 3 Replies
View Related
Dec 11, 2007
I have setup 2 x64 SQL boxes now that are having problems with memory. Both boxes were pretty much setup with the defaults on windows 2003 R2 64 bit server, only changes were file locations etc.
On both servers the memory usage continues to climb over the course of a few days until all physical and virtual memory is used and the server comes to it's knees. A reboot will stabilize it for a few days while the memory usage ramps up again.
The sqlservr.exe process does not report much memory but the commit charge in the performance tab of task manager shows the maxed out value. I thought the sqlservr.exe process only didn't report the correct memory figure when AWE is enabled which it isn't.
I thought as a default, SQL server would dynamically allocate memory as needed and had internal mechanisms that would not use more than the physical ram available. The one server has 16GB and I even set the max SQL memory usage to 12GB but still my total memory usage would get out of hand. SQL Server is the only application on these boxes.
Am I making some incorrect assumptions and need to change the way SQL is setup? Any suggestions?
Thanks
Scott
View 5 Replies
View Related
Jul 20, 2005
I'm trying to get the machine free ram value using either T-SQL orSQL-DMO.I found .Registry.PhysicalMemory which takes care of the total ram butI still need eithrt the free or the used.Any ideas?Thanks!
View 1 Replies
View Related
Jun 13, 2007
Hi All -
We have some CLR sprocs and tvf's we run in a batch job that recently have been getting the out of memory issue. I want to increase the amount of memory allocated to the CLR using the -g startup switch but i want to make an intelligent decision on how much to allocate. What are some of the best ways that you have found to estimate how much to give the CLR?
Thanks,
Cameron
View 1 Replies
View Related
Mar 14, 2007
How much available memory is best practice for SQL servers? We have some alerts set up by our system admin, they go off if the available memory goes below 500mb. Which is fine for other servers but I feel for SQL server it isn't quite correct. Currently we stand below at about 475mb and the PF usage is around 7gb.
It is SQL 2005 standard SP1 x64
dual intel xeon 5160s
8gb physical memory
buffer hit cache is > 99%
I am just not confident enough to make a solid decision here that this is acceptable. In the beginning of this month I ran some counters for 24hrs to get a feel for the baseline. The average for available memory was about 850mb at that time. So I am wondering if it is going to keep declining and turn into a problem. The server/instance has not been restarted since maybe last November.
thanks
View 3 Replies
View Related
Oct 17, 2000
Does anybody know why BCP on v6.5 grabs so much memory for SQL Server? I have a few table imports where the BCP process will consume over 460MB of RAM during the imports.
The BCP cmd file is executed via an xp_cmdshell call. The server has 2+GB of RAM, but the BCP process effectively flushes large amounts of data from the buffer. It takes quite along time for the cache to recover from this, and after this, the rest of the nightly processes run much slower, as they end up having to hit the drives to retrieve information that should already be in cache.
If anyone can shed some light on this it would be much appreciated.
Ian Dundas
DBA
Assante Asset Management
View 2 Replies
View Related
May 9, 2003
Hi,
One of the production box running only sql server application, is showing 80% memory usage on the task manager-memory usage history right now.
We are running sql server 2000 standard version-sp3 with 2GB memory on this box. Server is not on the scheduled reboot at this point.
We have seen this behavior for this box last month that after task manager showing 90% memory usage contantly for several days, when server was manually rebooted, memory usage dropped to 35%. Now it's back to 80%.
Our DBA thinks that server should be rebooted on a regular schedule regardless of memory problem. Our network admin doesn't seem to agree with this. He is not ready to reboot the machine even with this high memory usage.
There is no noticable difference performancewise yet.
My questions are:
Is it bad that memory usage reaches from 35% constant to 80-90% or is it common? Should sql server be rebooted immediately to take care of it? Should sql server 2000 rebooted on regular basis regardless of any problems? Shouldn't sql server be releasing memory back to the OS even without rebooting? How do I find out whether server actually is going through memory problems and what is causing it?
Thanks in advance for your opinions,
Shaili
View 3 Replies
View Related
Sep 25, 2006
hi all
I got a small MSSQL server.. total database file size less than 7GB. with 2G rams installed 2 cpus. but for some reason when i check the task manager process mem usage is over 1.7G. the sql server memory setting in on Dynamically not fixed. and maximum 2G i believe is default. anyway. my question is over 1.7 memory usage is too high? because i dont have alot of transaction going. and cpu usage is very low. wondering if this's normal or not. and if is not normal . what cause the memory usage so high...... and how can i adjust back to normal. ? can anyone help me out? or any suggestion? thanks
View 4 Replies
View Related
Dec 1, 2004
Hi All,
Currently I have an application that uses SQL 2000. The SQL server service tends to take up as much of the physical memory as possible. The problem is I also have other services relating to this application running that are very important.
What tends to happen after a period of time is SQL takes up all of the physical memory, so that the other services are using the paging file (virtual memory). This causes extremely slow response time over the network as these other services are having to parse the paging file.
Upgrading the memory is currently not an option :(
I know there is an option to set memory usage for SQL but I am unsure how this would respond in a production environment. What would happen if SQL would require more memory than what was allocated to it?
Can SQL release the memory and still act as normal?
Any input would be generously appreciated
Cheers!
View 2 Replies
View Related
Jan 8, 2004
I am using SQL Server 7.0 on a Windows NT machine. We have been having problems with SQL Server not releasing the memory after it has utilized it.
Currently it is configured to allow a max of 511MB memory (1024 is total on the machine). I had some advice that my best solution would be to reduce the Max Memory to a lower value (say 400 MB) to help reduce the problem.
Is this not counter-intuitive? Or is this the correct solution?
Thanks.
View 9 Replies
View Related
Apr 4, 2008
With SQL Server 2005, I have the problem that sqlserv.exe keeps using more and more memory. Now I did some research and found the following anwers in different places:
*It seems to be the way that SQL Server works. It just uses all the memory which it can get. I have two remarks about this:
1) I that is true, then why is a fresh installation of SQL Server not consuming all the memory it can get?
2) After a few weeks, it consumes so much memory that the whole system (even SQL Server itself) start running very slow. I don't think that's the intended behavior?
So I thought about restricting the maximum memory that SQL Server uses, but people keep saying that's not the way it should be done: SQL Server should be allowed to allocate memory dynamically.
Can anyone help me with my questions?
One other thing that may be of relevance: This instance is a disitributor for replication and the distribution.MDF file also seems to be increasing over time. It became much larger than the application database.
Thanks in advance for replies
View 2 Replies
View Related
Nov 27, 2006
Hi there group.
Could some please point me in the right direction?
We have a database and it's about 28GB in size, recently the SQL server process that runs uses approximately 1.6GB of Memory.
I have tried running SQL profiler to find out which Stored Procedure is causing this but came up unsuccessful.
When restarting SQL the process it run's at about 50MB for about 20sec and then starts climbing up to 1.6GB of memory usage.
Please assist.
View 12 Replies
View Related
Feb 21, 2007
I am using a tool to monitor SQL Server and Windows. It is warning me that:
Process 1004:services has a virtual address space of 1,846.20 MB. This is close to the Windows two gigabyte address space limit.
When locate the process 1004, it shows 15 threads that Elapsed time for all of them is 1d, 3hrs. The Thread state is Waiting and the Thread Wait Reason is "Waiting for an Execution Delay to be resolved".
I think that 1d, 3hrs is from the time I rebooted my server.
Should I take any action? How?
View 7 Replies
View Related
Feb 27, 2008
Hi to all,
I front a series problem with my SQL Server.
I Use SQL Server 2000 standard on Windows 2000 Server machine.
The problem: after certain actions such as DTS (that takes table
contents and insert to a a file) the Memory usage of SQLservr.exe is grown significantly and after it finshes with success it doesn't free the used memory for the action - in this case the DTS. maybe this explains why I have Memeory Usage of 1700MB of Sqlservr.exe on windows task manager.
Is it a bug? why SQL doesn't free the memory after finishing the action.
Any Solutions ? Please send me a short feedback.
Roy
View 3 Replies
View Related
Aug 31, 2005
Hello all,How can I tell how much memory SQL Server is using on a server. OnWindows 2000, whenever I go to Task manager/processes/memory usage SQLServer seems to be showing 1,744,124K. On all of my servers withvarious size, usage of databases, all of them show SQL Server to beusing about the same amount of memory. Can someone explain this to me?Shouldn't it use more for larger databases, heavy hitting databases?Also, I normally check Dynamically configure SQL Server memory and putthe maximum threshold to a little bit less than the max on the server.The minimum query memory is set to 1024. Is that 1024 a subset of thememory used by SQL Server, or is this additional that can be used?Thanks,Raziq.*** Sent via Developersdex http://www.developersdex.com ***
View 9 Replies
View Related
Feb 27, 2006
Hello All,On all of my SQL servers (2000 with SP3), when I go to task manager andlook at memory usage, sqlservr.exe is always at 1.7gigs. If I reducethe maximum to let's say 1 gig it will go down to 1 gig. But if it iseven at 2gigs or 3 gigs it will be showing 1.7 gigs. Why? Is is ok toreduce the memory usage of sqlservr.exe?Raziq.*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies
View Related
Jul 20, 2005
I am using SQL 8 Personal edition with sp2 applied. I set the maxserver memory to 32MB and leave the min server memory at 0. When myapplication starts hitting the database hard the memory usage reportedthrough task manager peaks between 41-42MB. I've stopped and restartedthe MSSQLserver service and checked that the running values are what Iset them to be. Does anybody have any ideas as to why the sqlservr.exewould be utilizing more memory than the configured value?This message was posted some years ago but nobody answered. Now I havethe same problem! Does anybody have an explanation?Thanks a lot
View 4 Replies
View Related
Jul 20, 2005
Hi,does someone know how much memory a user session takes on a SQLServerdatabase server? How many concurrent user sessions can a normal server(4 GB primary memory) handle, before connection pooling is needed?/Fredrik
View 2 Replies
View Related
May 7, 2007
Hi,
I'm wondering about the memory usage of SQL Server Ce and the Compact Framework.
I've heard I can use only 32 MB per process. SQL Server Ce runs in process and my database file is about 60 MB big.
1. Does that means, I can only use for my application:
32 MB - CLR - SQL-Server Runtime - parts of my database file hold in memory
2. Is SQL Server Ce swapping parts of my database file into my process memory?
If so, is there a chance to group some tables, that they are swapped together to increase
performance?
3. Means big databases big memory usage in my process memory?
Thanks,
Stefan
View 3 Replies
View Related
Sep 20, 2001
Would anyone have any suggestions/advice on how to determine what is causing the memory usage for sqlserver.exe to increase a dramatic pace in windows task manager? What would be a good resolution to slow down this memory usage?
Thanks!
View 2 Replies
View Related
