Adventureworks Version 631 Error
Aug 18, 2007
I installed Sql Server 2005 Express Edition on an XP system this
morning and tried to attach Adventureworks, but got an error message
stating:
The database 'Adventureworks' cannot be opend because it
is version 631. This server supports version 612 and
earlier. A downgrade path is not supported.
Since both Sql
Server 2005 Express Edition, Management Studio, and the Adventureworks
database have all be downloaded within the past three days, I am
astonished that there is a compatibility issue. I have run
Adventureworks on other systems without problems. Any suggestions
on how to proceed?
View 2 Replies
ADVERTISEMENT
Feb 21, 2007
I want to install the new (February 2007) sample databases. The readme says any previous version must be removed by dropping the database., then running Remove from Add or Remove Programs. I've detached the database, but when I try to uninstall it I get the following message:
"Error 1309.Error reading from file: pathandfilename.mdf. Verify that the file exists and that you can access it."
What should I do.
Barry
View 5 Replies
View Related
Jan 7, 2008
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551.
OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name].
OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to back up file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file],
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name]
FROM DISK = '[Path to backup file]' WITH REPLACE,
MOVE 'ASP_Live_Data' TO [Path to MDF file]',
MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
Does anyone have any suggestions?
View 1 Replies
View Related
Jul 21, 2007
I am using ms sql server 2005 Enterprise Evaluation Edition, and I can use the other sample dtabases, like pubs, northwind, but not adventureworksI tried diffrent ways, I am very new to this, and I try before I ask, and I had to give up, Here is what I didwhen I installed adventureworks it was like 166 mb. bigAnd when I tried to use it with visual studio, every time I want to drag a table from: data connections/adventureworks, and try to veiw it in borwser it gives me an application server error, and invalid object namewith northwind database works finethen I tried executing instawdb.sql located C:Progam filesMicrosoft SQL Server90ToolsSamplesAdventureWorks OLTP, from Sql server management studio,And it finishes with errors, and is only 122 mb. bigThis line in red:Msg 4861, Level 16, State 1, Line 1Cannot bulk load because the file "C:Archivos de programaMicrosoft SQL ServerMSSQL.1MSSQLDATAAWDBAddress.csv" could not be opened. Operating system error code 3(error not found).and at the end this:DBCC SHRINKDATABASE: File ID 1 of database ID 6 was skipped because the file does not have enough free space to reclaim.last night I was thinking wether it might be my OS( usning windows xp), or server evalution editionDoes anybody know something about this?I already google search and only found one person with the same problem, but there was no solution posted
View 1 Replies
View Related
Jul 24, 2007
Hi, I will start step by step:1. a new web site with VS 2005.2. I added a sqldatasouce and connect with AdventureWorks sample database ,which comes with sql server 2005 developer edition, selected by drop-down list. [ server name:(local) ]3. Test connection. It is OK.4. Saved as 'AdventureWorksConnectionString'.5. Some columns are selected in the 'product' table.6. At the end while testing query with 'test query' button it gives: "There was an error executing the query. Please check the syntax of the command and if present, the types and values of parameters and ensure the are correct. Invalid object name 'Product'. "7. However when I choice NorthWind database sample I installed externally, there is no problem.Moreover, when I choice AWBuildVersion table in the AdventureWorks, and it's columns, there is also no problem.8. I compared NorthWind and AdventureWorks security properties in the SQL server managment studio, but can't find any differences.9. I have been searching all the web since two days.10. Thanks.
View 4 Replies
View Related
Dec 4, 2007
Hello,
I m trying to create an analysis services project, I have the following system error : division by zero.
Then I€™ve tried to use the AdventureWorks analysis services project to see if I have also the same error , and yes I have the same error.
I live in Belgium, does the problem comes from the regional settings?
I€™ve tried to change them to English(United-States) and then I have this error : system error key not valid for use in specified state
I€™m only trying to execute the project, when I build everything goes fine.
Please help me
View 3 Replies
View Related
Oct 4, 2006
Hi there,
I got this error when i tried to attach the adventureworks database and SSIS training database.
an exception occurred while executing a transact-sql statement or batch
(microsoft.sqlserver.connectioninfo)
could not find row in sysindexes for database ID 17, object ID 1, index ID 1. Run DBCC
checktable on sysindexes.
I join join a network domain for my computer. Previously it doesnt have this problem.
View 1 Replies
View Related
Nov 14, 2005
The database 'maindb' cannot be opened because it is version 611. This server supports version 603 and earlier. A downgrade path is not supported.Could not open new database 'maindb'. CREATE DATABASE is aborted.Could not attach file 'I:DataWebaspdotnet.skskuska_14edf6b4-8caa-4d92-8324-89e1108255bcwwwApp_DataDatabase.mdf' as database 'maindb'.The url is: http://skuska.aspdotnet.sk/Database.aspxIf you have some idea, how to fix it, please post it.Thanks in advance!
View 2 Replies
View Related
Nov 26, 2002
I have copied a SQL Server 70 database to SQL Server 2000. Got error message during copying - 'unable to attach db' and when click on the db on SQL Server 2000, go erro - error 946 cannot open database version 525. Upgrade the database to the latest version. Anyone has any idea??:confused:
View 11 Replies
View Related
May 16, 2007
Dear all
Please help me ,
When I am giving http://localhost/reportserver in internetexplorer the followig error message is coming.
I already installed the reportserver in my machene
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'T.0.8.40'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. (rsInvalidReportServerDatabase) Get Online Help
After the error message I did the following steps
1. SQLserver configuration tool
2. Report server configuration
3. Given the machene name as SQL, instance name MSSQL
4. Given the server name, and selected the reportserver as database
5. Clicked upgraded button
6. Veryfy Database edition showed in green ticked mark
7 Veryfy database version showed as error " The databse version doesnot match ur reporting service installation. You must upgrade reporting service database "
8. After that I again clicked upgrade button but the same error message is showing ....
Please help me to solve this problem
Pegards
Polachan
View 2 Replies
View Related
Aug 2, 2006
Hi,
I am not able to download the trial edition of sql server 2005.
http://www.microsoft.com/downloads/details.aspx?FamilyId=6931FA7F-C094-49A2-A050-2D07993566EC&displaylang=en
From this page when I click continue to do the registration, it displays a page not found error !! Can you plz fix the link
thanks
View 1 Replies
View Related
Sep 1, 2014
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Vimal Lohani
SQL DBA | MCP (70-461,70-462)
View 4 Replies
View Related
Jul 25, 2006
Hi all,
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Thank you very much
Tony
View 1 Replies
View Related
Feb 19, 2008
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
View 3 Replies
View Related
Oct 30, 2007
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
View 1 Replies
View Related
Mar 11, 2006
Hi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.
View 7 Replies
View Related
Jan 31, 2007
Want to upgrade Evaluation version of SQL 2005 to full retail version. How would I do that. Thanks very much for your hel
Sam Commar
View 1 Replies
View Related
Sep 22, 2015
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
View 3 Replies
View Related
Aug 8, 2006
Hi everyone;
I'm just getting started. I'm on Window 2000 pro with service pack 4 etc...
I installed "C#" and "Microsoft Visual Web Developer 2005 Express Edition" -thats fine.
I then installed "Microsoft SQL Server" (SQLEXPR.EXE) it was good until it did a check:
Everything checked and passed fine except for the 2nd to last one:
- Minimum MDAC Version Requirement (Error)
Messages
* Minimum MDAC Version Requirement
* The system does not have the required version of Microsoft Data Access Components (MDAC) for this SQL Server release. For details, see Hardware and Software Requirements for Installing SQL Server 2005 in Microsoft SQL Server Books Online.
- Edition Change Check (Success)
Messages
* Edition Change Check
* Check Passed
-----------------------------------------------------------------
So I was wondering where did I go wrong. I have lots of hard drive space too.
CPU is 1.80GHz - with 523,056 KB RAM
I did some research but there seems to be 100's of pages.
View 4 Replies
View Related
Oct 12, 2007
Hello,
Does anyone know the steps I need to take to update the version of reporting services from C.0.8.40 to C.0.8.43?
My connection error occurred during my attempt to move a database from one server to another using detach and attach. After successfully attaching the databases to the new server I got the following error:
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.8.43'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. (rsInvalidReportServerDatabase) (Report Services SOAP Proxy Source)
Thanks for any help you can provide!
View 10 Replies
View Related
Jul 16, 2007
Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
Any thoughts or suggestions?
View 4 Replies
View Related
Apr 20, 2007
We want to licence a trail version 2005 EN with an fullversion of MS Sql server 2005 EN. Is that possible?
Conworx
View 4 Replies
View Related
Dec 7, 2007
I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
View 3 Replies
View Related
Mar 12, 2007
We have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
View 4 Replies
View Related
Dec 12, 2007
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings:
Package Errors:
The version of component "****" (11773) is not compatible with this version of the DataFlow.
Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly.
The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1".
component "Agreement File" (11773) failed validation and returned error code 0xC0048021.
One or more component failed validation.
There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Any help would be appreciated.
FMikee
View 16 Replies
View Related
Nov 8, 2007
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Thanks a milliom
Ning
View 1 Replies
View Related
Aug 3, 2005
Hi.I'm trying to setup a publication but I received an error:The process could not bulk copy out of table 'cont20684C64E88B424BBBBE84921DEDFF77'.I used the log to get more specific info and I got the following:Microsoft SQL Server Snapshot Agent 8.00.760Copyright (c) 2000 Microsoft CorporationMicrosoft SQL Server Replication Agent: MyServer-MyMainDatabase-MyMainDatabase2MyTargetDatabase-4Connecting to Distributor 'MyServer'Connecting to Publisher 'MyServer.MyMainDatabase'Server: DBMS: Microsoft SQL ServerVersion: 08.00.0760user name: dboAPI conformance: 2SQL conformance: 1transaction capable: 2read only: Nidentifier quote char: "non_nullable_columns: 1owner usage: 31
max table name len: 128max column name len: 128need long data len: Ymax columns in table: 1024max columns in index: 16max char literal len: 524288max statement len: 524288max row size: 524288[8/3/2005 4:43:30 PM]MyServer.MyMainDatabase: sp_MSgetversionInitializing the publication 'MyMainDatabase2MyTargetDatabase'*** [Publication:'MyMainDatabase2MyTargetDatabase'] Publication view generation time: 201 (ms) ****** [Publication:'MyMainDatabase2MyTargetDatabase'] Make generation time: 100 (ms) ***Generating schema script for article '[ContactsCategories]'Generating conflict schema script for article '[ContactsCategories]'Generating referential integrity script for article '[ContactsCategories]'Generating trigger script for article '[ContactsCategories]'*** [Article:'ContactsCategories'] Time generating all schema scripts: 1762 (ms) ***Generating schema script for article '[Contacts]'Generating conflict schema script for article '[Contacts]'Generating referential integrity script for article '[Contacts]'Generating trigger script for article '[Contacts]'*** [Article:'Contacts'] Time generating all schema scripts: 1292 (ms) ****** [System table:'MSmerge_contents'] .SCH script generation time: 10 (ms) ***
*** [System table:'MSmerge_tombstone'] .SCH script generation time: 20 (ms) ***
*** [System table:'MSmerge_genhistory'] .SCH script generation time: 21 (ms) ***
*** [System table:'sysmergesubsetfilters'] .SCH script generation time: 30 (ms) ***
[8/3/2005 4:43:34 PM]MyServer.MyMainDatabase: select 1 from [dbo].[ContactsCategories] (TABLOCK HOLDLOCK) where 1=2 [8/3/2005 4:43:34 PM]MyServer.MyMainDatabase: select 1 from [dbo].[Contacts] (TABLOCK HOLDLOCK) where 1=2 Bulk copying snapshot data for system table 'MSmerge_contents'select * from cont20684C64E88B424BBBBE84921DEDFF77 where 1 = 2[8/3/2005 4:43:35 PM]MyServer.MyMainDatabase: select * from cont20684C64E88B424BBBBE84921DEDFF77 where 1 = 2SourceTypeId = 4SourceName = MyServerErrorCode = 0ErrorText = ODBCBCP/Driver version mismatchThe process could not bulk copy out of table 'cont20684C64E88B424BBBBE84921DEDFF77'.Disconnecting from Publisher 'MyServer'
I have also found in another forum tha this is related with the files sqlsrv32.dll, sqlsrv32.rll and odbcbcp.dll. The versions of these drivers in my server are:sqlsrv32.dll: 85.1025sqlsrv32.rll: 81.9001odbcbcp.dll: 81.9031Is it really the problem in the versions of these files? Anyone knows how to update them and if there any risks by doing it?Thanks in advance...
View 1 Replies
View Related
Oct 9, 2007
Hello all,
I'm getting this error when installing SQL Express 2005 on a non-English version of Vista.
"SQL Server Setup could not validate the service accounts. Either the service accounts have not been provided for all of the services being installed, or the specified username or password is incorrect. For each service, specify a valid username, passowrd, and domain, or specify a built-in system account."
Using Wise I get this error only when installing on a non-English version of Windows Vista, I can get the install to complete if I remove nt/authority. I've tried changing the non-English versions of Vista localization to English but I still get the same error.
Any help would be great.
Thank you
View 1 Replies
View Related
Jul 20, 2005
HiWhen I attempt to install MS SQL Server evaluation copy (downloadedfrom Microsoft site) on Windows 2K Professional getting followingerror.Setup initialization error.The system cannot find the path specified.Source file or directory missing or cannot be read:'C:SQLEVALx86setup..Systemsqlunirl.dll'Please help.Regards,AG
View 1 Replies
View Related
Jan 31, 2008
Where do I look to fix this?
Server status is red.
I think I might have left the domain name blank when I installed this. Is there anyway to enter one later. I have tried to change this through add/remove programs and do not get a chance to change this field
Thanks!
Terry Beckman
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product>
<Locale>en-US</Locale>
<TimeZone>Central Standard Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerService__main_01_31_2008_08_18_22.log</Path>
<SystemName>JPADESKTOP1</SystemName>
<OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName>
<OSVersion>5.1.2600.131072</OSVersion>
</Header>
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!configmanager!4!1/31/2008-08:18:22:: w WARN: WebServiceAccount is not specified in the config file. Using default: JPADESKTOP1ASPNET
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!4!1/31/2008-08:18:22:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!servicecontroller!9!1/31/2008-08:18:23:: Total Physical memory: 1055309824
ReportingServicesService!library!4!1/31/2008-08:18:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'JPADESKTOP1ASPNET' is not recognized., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'JPADESKTOP1ASPNET' is not recognized.
ReportingServicesService!servicecontroller!4!1/31/2008-08:18:23:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'JPADESKTOP1ASPNET' is not recognized.
at Microsoft.ReportingServices.Library.Native.NameToSid(String name)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)
View 1 Replies
View Related
Apr 11, 2004
Hello,
I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development".
How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict?
Thanks,
View 1 Replies
View Related
Nov 12, 2007
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.8.54'. the expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. I'm getting this whenever try to access the report server via SSMS, I have tried to upgrade via the Reporting Service Configuration Manager but get an error message similar to above except it says: The database version (C.o.8.54) does not match your Reporting Services installation. This version of the database cannot be upgraded. You must use a different database. Has anyone seen this before? I can create a new database, but don't want to loose all my reports. Any ideas. Oh, not even sure if the backups exist from before this error, I've spent 2 weeks trying to get access to the server so I could try to upgrade, only to get the above results. Thanks for your help, David
View 5 Replies
View Related
Apr 27, 2006
I downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
Please help.
Mike.
View 7 Replies
View Related
