Affecting SELECT Rows To A Table Variable

Aug 16, 2006

Hi,

I would like to know how to add SELECT row to a table variable. It's not for my SELECT syntax(code following is just an ugly example) that I want help it's for the use of table variable.
Your help will greatly appreciate!!!

ex :
DECLARE @MyTestVar table (
idTest int NOT NULL,
anotherColumn int NOT NULL)

SET @MyTestVar = (SELECT idTest, anotherColumn FROM tTest)-- This cause an error :-- Must declare the variable '@MyTestVar'. ???? What?

View 3 Replies


ADVERTISEMENT

Insert Statement Not Affecting Any Rows

Feb 4, 2008

I have the following code:



Code Snippet
INSERT INTO [CICC].[dbo].[972createtest]
SELECT
Always81,
AccountNumber,
CAST(SUBSTRING(DateOfPayment,5,2) + SUBSTRING(DateOfPayment,1,2) + SUBSTRING(DateOfPayment,3,2) as datetime), CAST(TotalPmtAmt AS decimal(9,2))/100,
Collector,
PmtCode,
CAST(AmtPdToAgency AS decimal(9,2))/100,
CAST(AmtPdToClient AS decimal(9,2))/100

FROM [CICC].[dbo].[972create]


I'm trying to insert data into the table called 972createtest. It has the following columns and datatypes:


[Always81] [smallint] NULL,

[AccountNumber] [nvarchar](8) NULL,

[DateOfPayment] [nvarchar](6) NULL,

[TotalPmtAmt] [decimal](11, 2) NULL,

[Collector] [nvarchar](3) NULL,

[PmtCode] [smallint] NULL,

[AmtPdToAgency] [decimal](11, 2) NULL,

[AmtPdToClient] [decimal](11, 2) NULL

And here's a sample of the data stored in those columns:



81 01068713 092107 40.00 NJW 31 4000.00 0.00

81 01068713 111207 2000.00 NJW 31 2000.00 0.00

81 01068784 110806 10000.00 KSD 31 10000.00 0.00

81 01068784 121506 10000.00 KSD 31 10000.00 0.00

81 01068784 030507 10000.00 KSD 31 10000.00 0.00

81 01068784 033007 14100.00 KSD 31 14100.00 0.00

81 01068784 051807 7400.00 KSD 34 7400.00 0.00

Everytime I try to run the code, I get a message telling me "0 row(s) affected". What stupid thing am I doing wrong?

View 8 Replies View Related

Declaring A Table Variable Within A Select Table Joined To Other Select Tables In Query

Oct 15, 2007

Hello,

I hope someone can answer this, I'm not even sure where to start looking for documentation on this. The SQL query I'm referencing is included at the bottom of this post.

I have a query with 3 select statements joined together like tables. It works great, except for the fact that I need to declare a variable and make it a table within two of those 3. The example is below. You'll see that I have three select statements made into tables A, B, and C, and that table A has a variable @years, which is a table.

This works when I just run table A by itself, but when I execute the entire query, I get an error about the "declare" keyword, and then some other errors near the word "as" and the ")" character. These are some of those errors that I find pretty meaningless that just mean I've really thrown something off.

So, am I not allowed to declare a variable within these SELECT tables that I'm creating and joining?

Thanks in advance,
Andy



Select * from

(

declare @years table (years int);

insert into @years

select

CASE

WHEN month(getdate()) in (1) THEN year(getdate())-1

WHEN month(getdate()) in (2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12) THEN year(getdate())

END

select

u.fullname

, sum(tx.Dm_Time) LastMonthBillhours

, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) lasmosbillingpercentage

from

Dm_TimeEntry tx

join

systemuserbase u

on

(tx.owninguser = u.systemuserid)

where

Month(tx.Dm_Date) = Month(getdate())-1

and

year(dm_date) = (select years from @years)

and tx.dm_billable = 1

group by u.fullname

) as A

left outer join

(select

u.FullName

, sum(tx.Dm_Time) Billhours

, ((sum(tx.Dm_Time))

/

((day(getdate()) * ((5.0)/(7.0))) * 8)) perc

from

Dm_TimeEntry tx

join

systemuserbase u

on

(tx.owninguser = u.systemuserid)

where

tx.Dm_Billable = '1'

and

month(tx.Dm_Date) = month(GetDate())

and

year(tx.Dm_Date) = year(GetDate())

group by u.fullname) as B

on

A.Fullname = B.Fullname

Left Outer Join

(

select

u.fullname

, sum(tx.Dm_Time) TwomosagoBillhours

, sum(tx.Dm_Time)/((select dm_billabledays from dm_billabledays where Dm_Month = Month(GetDate()))*8) twomosagobillingpercentage

from

Dm_TimeEntry tx

join

systemuserbase u

on

(tx.owninguser = u.systemuserid)

where

Month(tx.Dm_Date) = Month(getdate())-2

group by u.fullname

) as C

on

A.Fullname = C.Fullname

View 1 Replies View Related

Reporting Services :: Select Query - Formatting A Date Affecting MIN

Sep 2, 2015

In my SELECT query I have: MIN(a.orderdue) AS 'Oldest order date'

This works in that it brings through the oldest order date, however it brings through a date format like: 2015-06-11 11:30.000

So I amended the SELECT query to:

MIN (CONVERT(varchar(17),a.orderdue,103)) AS 'Oldest order date'

This brings the date through as 11/06/2015, which is preferable.

But I have noticed that doing this has affected the output: the MIN function no longer returns the first (oldest) date, but a completely different value.

Obviously my changing the formatting for the date has affected the MIN output. Is there any way I can amend the formatting of the date without this happening?

View 3 Replies View Related

Need To Return X Rows But Select Top Doesn't Work With Variable

Jan 26, 2006

I am writing some functions that work on a time series database of prices, ie volatility, correlation. I need to use the SELECT TOP syntax, but cannot do this with a variable, ie 'SELECT @x TOP * from prices'. My solution is to simply have a function for each potential period that will be looked at - 30day_volatility, 60day_volatility, etc. I looked at setting the ROWCOUNT variable but this is not allowed in functions. I haven't posted any DDL because I think the question is general enough - How do I return n ordered rows from a function without using SELECT TOP, or is there a way to use SELECT TOP with a variable that I am not aware of.

Thanks!

View 2 Replies View Related

T-SQL (SS2K8) :: How To Select All Or Multiple Rows From Typed XML Variable

Apr 2, 2014

I am using xml schema that is like this:

<DetailRows>
<DetailRow>
<MonthNumber></MonthNumber>
<Amount></Amount>
</DetailRow>
</DetailRows>If my variable contains following xml document as un-typed xml

[Code] ....

However, if I use a typed xml variable that is based on above schema, I cannot use OPENXML. What is the correct way of achieving same result with a typed xml doc? I am using SS2K5.

View 1 Replies View Related

Table Name As Variable In SELECT ?

Nov 2, 1999

Is there any suggestions for using such parameters as table name or column name in T-SQL queries ?
Please except EXEC ('string').
My server is 7.0

View 2 Replies View Related

HOW TO SELECT ROWS IN THE MASTER TABLE WITH NO RELATIONED DATA IN DETAILS TABLE

Dec 7, 2007

I have the following data

MASTER
id
name


DETAIL
id
master_id
name

I want a perform a query where i can get all the rows of the master table which have no relationed rows in detail table.

How can I do that???

View 1 Replies View Related

Dataset Into A Table Or Matrix With Fixed Number Of Columns, Variable Rows

Jul 13, 2007

Hi

I have a dataset with 2 columns, a rownumber and a servername - eg



rownumber servername

1 server1

2 server2

....

15 server15



I want to display the servernames in a report so that you get 3 columns - eg



server1 | server2 | server3

server4 | server5 | server6

...

server13 | server14 | server15



I have tried using multiple tables and lists and filtering the data on each one but this then makes formating very hard - i either end up with a huge gap between columns or the columns overlap



I have also tried using a matrix control but cant find a way to do this.



Does anybody know an easy way to do this? The data comes from sql 2005 so i can use a pivot clause on the dataset if somebody knows a way to do it this way. The reporting service is also RS2005



Thanks



Anthony

View 1 Replies View Related

Variable For The Table Name In A SELECT Statement.

Apr 23, 2007

Hi,I'm trying to dynamically assign the table name for a SELECT statement but can't get it to work. Given below is my code: SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO


CREATE PROCEDURE GetLastProjectNumber (@DeptCode varchar(20))
AS
BEGIN TRANSACTION
SET NOCOUNT ON

DECLARE @ProjectNumber int
SET @ProjectNumber = 'ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','')
SELECT MAX(@ProjectNumber)
FROM 'tbl_ProjectNumber' + REPLACE(CONVERT(char,@DeptCode),'.','');
END TRANSACTION  Basically, I have a bunch of tables which were created dynamically using the code from this post and now I need to access the last row in a table that matches the supplied DeptCode. This is the error I get:Msg 102, Level 15, State 1, Procedure GetLastProjectNumber, Line 29Incorrect syntax near 'tbl_ProjectNumber'. Any help would be appreciated.Thanks. 

View 3 Replies View Related

Select First N Rows Of Table

Mar 28, 2006

Let us say that I have a table with two sets of values as such:Item Extension--- ----100023 1100025 1100025 2100028 1100029 1100029 2100029 3[...]Note that a given item number can appear multiple times if it has morethan one extension number.I want to be able to select the first N entries as grouped by itemnumber. So if N = 3, that would return 100023, 100025 and 10028 withtheir associated extentions. I would also like to be able to selectsay, the 2nd through 9th entries grouped by item number.I've tried something like this to give me row counts:select rank = count(1), t1.item, t1.extensionfrom ItemTable t1 inner join itemTable t2on t1.item >= t2.itemgroup by t1.item, t1.extensionorder by rankBut that gives me this sort of result:Rank Item Extension---- --- ----1 100023 13 100025 13 100025 24 100028 17 100029 17 100029 27 100029 3[...]Any suggestions would be welcome.

View 2 Replies View Related

Select ROWS In Table A That Aren't In Table B

Jan 28, 2008

I've been scratching my head over this one.
It should be pretty easy to do, but I keep going over the same problem.

I have 3 tables (Suppliers, Categories & Suppliers_To_Categories).

Suppliers_To_Categories contains which suppliers are related to which categories.

The set-up is so (simplified):

Suppliers
id
1 Supplier 1
2 Supplier 2
3 Supplier 3
4 Supplier 4

Categories
id
1 Category A
2 Category B
3 Category C
4 Category D

Suppliers_To_Categories
id supplierId categoryId
1 1 1
1 1 2
1 1 3
2 2 3
3 3 1
3 3 3


What I am after is an SQL statement which tells me for a particular category, which suppliers ARE NOT related to it, so they can be assigned.
E.g.

Category D has Suppliers 1-4 unassigned
Category C has Supplier 4 unassigned
Category B has 2, 3, 4 unassigned
Category A has Supplier 2, 4 unassigned etc...

I've got the other side of the SQL statement which tells me which suppliers are assigned to a category (see below):
SELECT Suppliers.*
FROM CatToSupplier INNER JOIN
Suppliers ON CatToSupplier.supplierId = Suppliers.supplierId
WHERE (CatToSupplier.CatId = @CatId)

This is probably really easy, but I've become unstuck!

View 13 Replies View Related

SQL 2012 :: How To Select Top 200 To 300 Rows From A Table

Mar 9, 2015

Select top 100 * from tab1 order by col1 ---gives me the top 100 order by col1

Select top 200 * from tab1 order by col1 ---gives me the top 200 order by col1

How do I select the top 100 to 200

View 3 Replies View Related

How To Create SELECT For Rows In Table

Oct 20, 2014

I have two db-tables:

"TAB01" with structure:

CREATE TABLE TAB01 (
ID int NOT NULL,
Name varchar(64) DEFAULT NULL,
PRIMARY KEY (ID)
)

It contains only name of some object.And "TAB02" with structure:

CREATE TABLE TAB02 (
ID int NOT NULL,
TAB01_ID int NOT NULL,
PositionA int,
PositionB int,
StringVal varchar(32) DEFAULT NULL,
PRIMARY KEY (ID)
)

which contains following data:

ID|TAB01_ID|PositionA|PositionB|StringVal|
1|1|1|1|A|
2|1|1|2|B|
3|1|1|3|C|

[code].....

and I need to find a sequence of values in column "StringVal", for example: A B.I look for a suitable SELECT, that returns (in this case) following result:

TAB02.ID|TAB01.Name|TAB02.PositionA|TAB02.PositionB|
1|ABC|1|1|
10|DEF|2|3|
25|JKL|4|3|
30|MNO|5|1|
36|MNO|5|7|
41|PQR|6|4|
46|STU|7|2|

Data inserted in "TAB02" represents real-life structure:

ID|Name|P01|P02|P03|...|Pxy|
1|ABC|A|B|C|D|E|A|D|
2|DEF|J|K|A|B|F|F|B|
3|GHI|B|A|C|A|F|G|A|F|
4|JKL|F|E|A|B|B|E|E|
5|MNO|A|B|C|B|A|D|A|B|
6|PQR|D|E|F|A|B|A|F|
7|STU|A|A|B|B|E|B|E|

View 1 Replies View Related

Select Rows Once That Do Not Exist Twice In Same Table

Dec 6, 2007



Hi,

I have a table of row IDs, order numbers, and status. Status is a value of 1 or 2. Some rows only exist as a 1, some only as a 2, and some exist twice -- once as 1 and once as 2. I want to select orders that are 2 as well as rows that are 1 but do not also exist in the table as 2. Ultimately I will only see each order number once. Is there a better/faster way than doing multiple selects and comparing them to each other?

Example data:

RowID OrderNum Status
1 101 1
2 102 1
3 102 2
4 103 2

Desired results when selecting ID and ordernum from that table:
1 101
3 102
4 103

Thanks.

View 4 Replies View Related

Is There A Way To Alphabetically Select Rows From Table?

Oct 9, 2006

I have SQL mobile database. Due to the size and speed, I would like to select only rows that start with a certain set of alphabets. Is there a way to do this? I just don't want to query everything and use only a small number of rows since the recources on the device is limited.

Thanks.

View 8 Replies View Related

Problem Getting Select Data Set For XML Auto, Elements Into A Table Variable

May 26, 2004

I have a simple select quesry but with 'for XML AUTO, ELEMENTS'. I want to put in the resulting xml string into a temporary table and then alter that string as per my requirements. But I am unable to put this XML string into a table variable. Please offer your suggestions.

View 4 Replies View Related

Invalid Results For Order By On Select Query Against Table Variable

Jan 21, 2008

I am attempting to sort the results of a query executed against a table variable in descending order. The data is being inserted into the table variable as expected, however when I attempt to order the results in descending order, the results are incorrect. I have included the code as well as the result set.


DECLARE @tblCustomRange AS TABLE

(

RecordID INTEGER IDENTITY(1,1),

RangeMonth INTEGER,

RangeDay INTEGER

)


DECLARE @Month INTEGER

DECLARE @Day INTEGER


-- Initialize month and day variables.

SET @Month = 8

SET @Day = 11

-- Insert records into the table variable.
INSERT INTO @tblCustomRange

(RangeMonth, RangeDay) VALUES (1,2)

INSERT INTO @tblCustomRange

(RangeMonth, RangeDay) VALUES (1,27)

INSERT INTO @tblCustomRange

(RangeMonth, RangeDay) VALUES (6,10)

INSERT INTO @tblCustomRange

(RangeMonth, RangeDay) VALUES (9,22)

INSERT INTO @tblCustomRange

(RangeMonth, RangeDay) VALUES (12,16)


-- Select everything from the table variable ordering the results by month, day in
-- descending order

SELECT * FROM @tblCustomRange

WHERE (RangeMonth < @Month) OR

(RangeMonth = @Month AND RangeDay <= @Day)

ORDER BY RangeMonth, RangeDay DESC



I am getting the following resultset:


RecordID RangeMonth RangeDay

----------- ----------- -----------

2 1 27

1 1 2

3 6 10



I am expecting the following resultset:


RecordID RangeMonth RangeDay

----------- ----------- -----------

3 6 10

2 1 27

1 1 2

View 1 Replies View Related

How To Select Specific 2 Rows Out Of A Huge Table

Jul 24, 2013

I have a very large table , and from that table I need just 2 records with column1 = 'A' and column1 = 'B' .

Here I don't think if I can not use OR or IN or Case operators because I need exactly 2 records not more.

View 6 Replies View Related

Random Selection From Table Variable In Subquery As A Column In Select Statement

Nov 7, 2007

Consider the below code: I am trying to find a way so that my select statement (which will actually be used to insert records) can randomly place values in the Source and Type columns that it selects from a list which in this case is records in a table variable. I dont really want to perform the insert inside a loop since the production version will work with millions of records. Anyone have any suggestions of how to change the subqueries that constitute these columns so that they are randomized?




SET NOCOUNT ON


Declare @RandomRecordCount as int, @Counter as int
Select @RandomRecordCount = 1000

Declare @Type table (Name nvarchar(200) NOT NULL)
Declare @Source table (Name nvarchar(200) NOT NULL)
Declare @Users table (Name nvarchar(200) NOT NULL)
Declare @NumericBase table (Number int not null)

Set @Counter = 0

while @Counter < @RandomRecordCount
begin
Insert into @NumericBase(Number)Values(@Counter)
set @Counter = @Counter + 1
end


Insert into @Type(Name)
Select 'Type: Buick' UNION ALL
Select 'Type: Cadillac' UNION ALL
Select 'Type: Chevrolet' UNION ALL
Select 'Type: GMC'

Insert into @Source(Name)
Select 'Source: Japan' UNION ALL
Select 'Source: China' UNION ALL
Select 'Source: Spain' UNION ALL
Select 'Source: India' UNION ALL
Select 'Source: USA'

Insert into @Users(Name)
Select 'keith' UNION ALL
Select 'kevin' UNION ALL
Select 'chris' UNION ALL
Select 'chad' UNION ALL
Select 'brian'


select
1 ProviderId, -- static value
'' Identifier,
'' ClassificationCode,
(select TOP 1 Name from @Source order by newid()) Source,
(select TOP 1 Name from @Type order by newid()) Type

from @NumericBase



SET NOCOUNT OFF

View 14 Replies View Related

Get The Id Of Inserted Rows --&&> Insert Into Table1 Select * From Table 2 ?

Apr 17, 2008



hi

I want to do a "bulk" insert and then get the id (primary key) of the inseret rows:

insert into table1 select * from table2

If I get the value of the @@identity, I always get the last inserted record.

Any idea how to get the ids of all inserted values?

Thx

Olivier

View 13 Replies View Related

Select Multiple Rows Of Data Not From Any Pre-existing Table

Apr 29, 2008

I know that this is legal sql: "SELECT 1 AS Blah"
I want to do something like this except for I need to select multiple rows each with a different value for Blah. The query needs to be legal to be passed to the SqlCommand.ExecuteReader Method. Is this possible?

View 3 Replies View Related

SQL Server 2012 :: Select Rows With Sum Of Column From Joined Table?

May 2, 2015

I want to return all rows in table giftregistryitems with an additional column that holds the sum of column `amount` in table giftregistrypurchases for the respective item in table giftregistryitems.

What I tried, but what returns NULL for purchasedamount:

SELECT (SELECT SUM(amount) from giftregistrypurchases gps where registryid=gi.registryid AND gp.itemid=gps.itemid) as purchasedamount,*
FROM giftregistryitems gi
LEFT JOIN giftregistrypurchases gp on gp.registryid=gi.id
WHERE gi.registryid=2

How can I achieve what I need?

Here are my table definitions and data:

/****** Object: Table [dbo].[giftregistryitems] Script Date: 02-05-15 22:37:11 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[giftregistryitems](
[id] [int] IDENTITY(1,1) NOT NULL,

[code].....

View 0 Replies View Related

Select Multiple Rows Based On Date Interval From Table

Apr 7, 2015

I have a table in which each record has a initial date and a final date. I would like to create I query that gives me one row for each month between the initial date and the final date. It would be something like this:

Original:

Product|price|initial_date|final_date
A|20.50|2014-08-10|2014-10-01
B|50|2015-01-15|2015-02-20

Resulting view:

A|20.5|2014-08-01
A|20.5|2014-09-01
A|20.5|2014-10-01
B|50|2015-01-01
B|50|2015-02-01

I would like to do that, because these dates correspond to the time in which the products are in possession of sellers, so I would to use this resulting query to generate a pivot chart in Excel to illustrate the value of the goods that are with our sellers in each month.

Is it possible to do it? I think I could do that direct in VBA, but I think that maybe it would be faster if I could do it directly in SQL.

By the way, I am using MS SQL Server and SQL Server Manegement Studio 2012.

View 1 Replies View Related

Integration Services :: Using Rows Returned In Object Variable And Email When Rows Exist

Sep 11, 2015

I have a conditional split in an SSIS package - one split is where if rows are returned according to a specific rule, then insert those rows into to a Recordset Destinationm which points to a variable of Object type.

How I can use this variable to email fellow users.  For example, what I would like is if ANY rows are returned to the Object variable (1 or more), then I would like to execute an email SP that we have on our server.

View 4 Replies View Related

T-SQL (SS2K8) :: Rows Into Columns - Remove Duplicates And Variable Rows

Aug 5, 2014

I managed to transpose rows into columns.

;WITH
ctePreAgg AS
(
select top 500 act_reference "ActivityRef",
row_number() over (partition by act_reference order by act_reference) as rowno,
t3.s_initials "Initials"
from mytablestuff
order by act_reference

[code]...

But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..

ref, initials
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW

OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view

ref, init1,init2
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW

View 6 Replies View Related

Randomly Order Selected Rows From Table - Select Procedure Vs Application

Jun 21, 2012

I need to randomly order the selected rows from my table. Is this better to do on the Application level or in a stored procedure using "orderby NewID()"?

Which is faster? There will be about 100 rows returned with 10 columns.

View 5 Replies View Related

Transact SQL :: Select 1000 Rows At A Time From / Into A Large Temp Table?

May 12, 2015

I am using SQL SERVER 2008R2, not Denali, so I cannot use OFFSET FETCH Clause.

In my stored procedure, I am doing a SELECT INTO #tblTemp FROM... Working fine. This resultset is going to be used in an SSIS package which will generate a pipe-delimited .txt file... Working fine.

For recoverability sake, I am trying to throttle back on the commit chunks to 1000 rows per commit until there are no more rows. I am trying to avoid large rollbacks.

Q: Am I supposed to handle the transactions (begin/commit/rollback/end trans) when the records are being inserted into the temp table? Or when they are being selected form the temp table?

Q: Or can I handle this in my SSIS package for a flat file destination? I don't see option for a flat file destination like I do for an OLE DB Destination (like Rows per batch, Maximum insert commit size).

View 6 Replies View Related

SQL Server 2012 :: Insert Multiple Rows In A Table With A Single Select Statement?

Feb 12, 2014

I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).

Each row will have the same item, but with a different task type.ie.

TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'

How can I do this with tSQL using a single select statement?

View 6 Replies View Related

SQL Server 2012 :: How To Pull Value Of Query And Not Value Of Variable When Query Using Select Top 1 Value From Table

Jun 26, 2015

how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...

create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)

[code]...

View 4 Replies View Related

SQL Server 2008 :: Insert Data Into Table Variable But Need To Insert 1 Or 2 Rows Depending On Data

Feb 26, 2015

I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)

I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !

Below is the code i have at the moment

declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT

set @startdate = '2015-01-01'
set @enddate = '2015-01-31'

[Code] .....

View 1 Replies View Related

Transact SQL :: How To Select Rows From Table Where DATE Column Is Today's Date

Aug 31, 2015

So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.

SELECT*
FROM[dbo].[EODPosting]
WHERE[EODPosting].[MatchDate]=GETDATE()

Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?

View 2 Replies View Related

Affecting Performance?

Dec 17, 2005

I have a table with 23 columns.  8 columns are not always filled by users and so valued to default.  Would this affect the overall performance of querying this table?  Should I separate those 8 columns and link with a one-to-one relation?

Thanks

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved