Agent Failure - Sp_MSpub_adjust_identity Error
Apr 25, 2007
Hi,
I am running transactional replication between a pair of SQL Server 2005 machines using a remote distributor. Occasionally the log reader agent fails with the error
"Replication-Replication Transaction-Log Reader Subsystem: agent * failed. The process could not execute 'sp_MSpub_adjust_identity' on '*'."
The agent starts back up again almost immediately on its own with seemingly no problems. I haven't been able to find any documentation on this error from Microsoft. Any ideas?
It is not a permissions issue as the log reader agent (and all of the other agents at that) are running under windows accounts with domain admin access for the domain that both the publisher and the distributor SQL Servers are on. (I know, I know, that's horrible. I've only been here a week and a half and I just found out about this today, so I didn't have anything to do with such a glaring security issue.) All of the SQL Servers involved with the replication are still granting sysadmin access to the windows administrators group.
View 1 Replies
ADVERTISEMENT
May 4, 2007
Twice in 2 days I have had a log_reader agent fail because of this proc. The error is "The process could not execute 'sp_MSpub_adjust_identity' on <Publisher Server Name>".
The publisher is SQL2000 SP4.
The distributor is SQL 2005 SP2 x64.
The subscriber is the same instance as the distributor, SQL 2005 SP4 x64.
Transactional Replication has been setup for more than a month with no problems, then this week 2 different log reader agents failed with the same error. I restarted the log readers and everything has been fine, so far. I have found very little useful information about this stored proc and nothing about why it would fail.
The full error message is:
Message
2007-05-04 00:48:34.928 Status: 0, code: 20011, text: 'The process could not execute 'sp_MSpub_adjust_identity' on '<Publisher Server Name>.'.
2007-05-04 00:48:34.928 The process could not execute 'sp_MSpub_adjust_identity' on '<Publisher Server Name>'.
2007-05-04 00:48:34.928 Status: 0, code: 7399, text: 'OLE DB provider 'SQLOLEDB' reported an error. '.
Any help would be appreciated.
View 8 Replies
View Related
May 5, 2006
I have created a job with several SSIS packages included in it. There is a failure when I schedule and run the job. Where can I find the information why it is failing? When I run the packages individually, they run fine. Thanks in advance.
View 3 Replies
View Related
Dec 22, 2007
I have an issue on SQL Agent and wish you to advice:
Servers Environment:
The SQL Server and SQL Agent Service is installed on clustered Server1 where the Integration Services (IS) is installed on Server2. Deployment of SSIS packages have been done on Server1 and IS on Server2 is pointing to it.
Case:
1. In SQL Managament Studio, connection on Database Engine is up on Server1, connection on IS is up on Server2.
2. Execution of all packages via IS connection on Server2 is working well. No issue on running.
3. SQL Agent Job is created under Server1. The job failed on running. Message from the Log File Viewer:
"The job failed. The Job was invoked by User domainhost. The last step to run was step 1 (tewst)."
"Executed as user: domainhost. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Code: 0xC0048020 Description: The version of component "Update to DB" (828) is not compatible with this version of the DataFlow."
Please advice ...
View 1 Replies
View Related
Feb 15, 2006
HELP>>> I am getting desperate
we recently had a failure which ended up wrecking my replication. The basic layout is from a source server -> Distribution Server then out to several other servers. Long story short the distribution database had to be moved to a new drive and I am now getting the following error message
The specified LSN (0003d4f0:0000721e:001b) for repldone log scan occurs before the current start of replication in the log (0003d63a:00002803:0001).
(Source: fsdpdcis (Data source); Error number: 18768)
---------------------------------------------------------------------------------------------------------------
The process could not set the last distributed transaction.
(Source: fsdpdcis-DPDDATA-1 (Agent); Error number: 22017)
I have reinitialized all subscriptions on the fsdpdcis server and run subscription validation (with no response). The data did re-load during the reinitialization but does not seem to be getting updated. This is driving me crazy and I am desperate. Any suggestions would be greatly appreciated. I have search MS knowledge base with no results and BOL has not been any help so far.
Thanks
Steve
View 4 Replies
View Related
Nov 13, 2007
I have scheduled a job in SQL Server Agent, as it executes it fails Immediatly. The error history displays the following error details, which i copied from the log file
"Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted.
The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error ... The package could not be f... The step failed."
I am using the File System Type to load my package.
Please assisst me in finding the solution
Regards
ZeEsHaN
View 9 Replies
View Related
Nov 30, 2006
Hi all,
I'm new to sql server administration so please show some understanding!
I installed sql server 2000 personal edition (upgrated to sp4) on an windows xp pro OS, but I cannot get the sql server agent service running. I get a message " the service did not start due to a logon failure". The server is my local pc, I'm using windows authentication and the login is "domain/loginname" where domain is my pc name.
Does it have to be installed on a server OS to have this service running?
Thanks George
View 5 Replies
View Related
Nov 4, 2006
I just tried to install the file:
D:WINDOWSMicrosoft.NETFrameworkv2.0.50727InstallUtil.exe SQLAgent.exe by running it from a command prompt.
and got an error that the system could not find the file or one of its components. It is a farily new install. I do not think I've lost any files any time.
What is the problem?
Thanks.
View 1 Replies
View Related
Jan 26, 2006
Hi There
I have a publisher, remote distributor and subscriber all running SS2000.
Under replication monitor on the distributor, under replication alerts i have enabled the "replication agent failure" alert.
All i need to know is should this alert trigger if the distribution agent that runs on the subscriber not the distributor fails?
I have add occurences of the distribution agent failing and the alert is not triggerred, is this because it only triggers for the agents that run on the distributor, ie: snapshot and log reader agents?
Thanx
View 7 Replies
View Related
Oct 22, 2007
After upgrading a server from SQL 2000 to SQL 2005, I can't get any SQL Agent jobs to run, giving logon failed messages. MSSQLSERVER and SQLSERVERAGENT services are set up to run as the same domain account which has administrative rights to the server and is a SQL login with the sysadmin role. For basic testing purposes, I created a test job that all it does is run a T-SQL command 'SELECT @@VERSION'. The job is also set to run as the same account that the Agent is running under. Below are the logs (with trace messages on) from the point of starting the Agent to my attempt to run the job (user and server names have been changed to protect the innocent):
2007-10-22 15:31:15 - ? [297] SQLServer Message: 15457, Configuration option 'show advanced options' changed from 0 to 1. Run the RECONFIGURE statement to install. [SQLSTATE 01000] (DisableAgentXPs)
2007-10-22 15:31:15 - ? [297] SQLServer Message: 15457, Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install. [SQLSTATE 01000] (DisableAgentXPs)
2007-10-22 15:31:15 - ? [297] SQLServer Message: 15457, Configuration option 'show advanced options' changed from 1 to 0. Run the RECONFIGURE statement to install. [SQLSTATE 01000] (DisableAgentXPs)
2007-10-22 15:31:15 - ? [100] Microsoft SQLServerAgent version 9.00.3042.00 (x86 unicode retail build) : Process ID 5168
2007-10-22 15:31:15 - ? [101] SQL Server TESTSERVER version 9.00.3042 (0 connection limit)
2007-10-22 15:31:15 - ? [102] SQL Server ODBC driver version 9.00.3042
2007-10-22 15:31:15 - ? [103] NetLib being used by driver is DBNETLIB.DLL; Local host server is
2007-10-22 15:31:15 - ? [310] 4 processor(s) and 3328 MB RAM detected
2007-10-22 15:31:15 - ? [339] Local computer is TESTSERVER running Windows NT 5.2 (3790) Service Pack 2
2007-10-22 15:31:15 - ? [431] Populating subsystems cache...
2007-10-22 15:31:15 - ? [432] There are 11 subsystems in the subsystems cache
2007-10-22 15:31:15 - ? [124] Subsystem 'TSQL' successfully loaded (maximum concurrency: 80)
2007-10-22 15:31:16 - ? [124] Subsystem 'ActiveScripting' successfully loaded (maximum concurrency: 40)
2007-10-22 15:31:16 - ? [124] Subsystem 'CmdExec' successfully loaded (maximum concurrency: 40)
2007-10-22 15:31:16 - ? [124] Subsystem 'Snapshot' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'LogReader' successfully loaded (maximum concurrency: 100)
2007-10-22 15:31:16 - ? [124] Subsystem 'Distribution' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'Merge' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'QueueReader' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'ANALYSISQUERY' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'ANALYSISCOMMAND' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [124] Subsystem 'SSIS' successfully loaded (maximum concurrency: 400)
2007-10-22 15:31:16 - ? [129] SQLSERVERAGENT starting under Windows NT service control
2007-10-22 15:31:16 - + [260] Unable to start mail session (reason: No mail profile defined)
2007-10-22 15:31:16 - ? [174] Job scheduler engine started (maximum worker threads: 400)
2007-10-22 15:31:16 - ? [193] Alert engine started (using Eventlog Events)
2007-10-22 15:31:16 - ? [146] Request servicer engine started
2007-10-22 15:31:16 - + [396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
2007-10-22 15:31:16 - ? [110] Starting SQLServerAgent Monitor using '' as the notification recipient...
2007-10-22 15:31:16 - ? [133] Support engine started
2007-10-22 15:31:16 - ? [167] Populating job cache...
2007-10-22 15:31:16 - ? [297] SQLServer Message: 0, SQLServerAgent Monitor started successfully. [SQLSTATE 01000]
2007-10-22 15:31:16 - ? [168] There are 2 job(s) [0 disabled] in the job cache
2007-10-22 15:31:16 - ? [170] Populating alert cache...
2007-10-22 15:31:16 - ? [171] There are 0 alert(s) in the alert cache
2007-10-22 15:32:59 - ? [177] Job Test1 has been requested to run by User DOMAINmyaccount
2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp)
2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp)
2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp)
2007-10-22 15:32:59 - ? [184] Job completion for Test1 is being logged to sysjobhistory
2007-10-22 15:32:59 - ! [382] Logon to server 'TESTSERVER' failed (ConnAttemptCachableOp)
View 2 Replies
View Related
Aug 13, 2015
I have a package from SQL Server 2008 R2, that loads data from .xlsx file to database table.There are total 15 columns and 14000 rows in the .xlsx. The package runs fine in BIDS. But the same package in SQL Agent fails with error "omponent "Excel Source" (1)" failed validation and returned validation status "VS_ISBROKEN".
When I tried to run the package by deleting the half of the records for first 7000 rows it ran successfully in agent. Then the second half (last 7000 rows) also succeed from agent job. So, there is no issue with the data/datatypes.The agent job is able to run with record upyo 11000 rows in .xlsx. When I am running for 12000 rows it is failing.Is there any problem with the number of records in .xlsx or size through SQL Agent?
I am running the package from a Proxy account in sql agent job.
ERROR:
Error: Executed as user: PROXY_ID. Microsoft (R) SQL Server Execute Package Utility Version 10.50.6000.34 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved. Started: 10:36:09 AM Error: 2015-08-10 10:36:10.87 Code: 0xC0202009 Source:
XX Connection manager "Excel Connection Manager 1"
[code]....
View 5 Replies
View Related
Sep 1, 2015
Below the Error Log Reported in SQL Agent (64 bit SQLServer 2008R2 Enterprise Edition Service pack 2 ,32Core CPU Numa Node and 64GB Ram
[298] SQLServer Error: 10054, TCP Provider: An existing connection was forcibly closed by the remote host. [SQLSTATE 08S01]
[298] SQLServer Error: 10054, Communication link failure [SQLSTATE 08S01]
[165] ODBC Error: 0, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections.
For more information see SQL Server Books Online. [SQLSTATE 08001]
[382] Logon to server '(local)' failed (ConnUpdateStartExecutionDate)
View 2 Replies
View Related
Jul 31, 2007
Hi all.
Is there a difference with sql replication between sql server 2005 64bit and sql server 2005 32bit?
Both are on a Windows 2003 server. One is 32 bit and the other one is 64 bit.
The first time I set up sql replication (test environment), it was on a 32 bit sql server. This worked fine.
The second time I wanted to set up replication (live environment), it was on a 64 bit sql server. This didn't worked fine.
I can't call the sqlcesa30.dll file on the 64bit server with IIS. So I called the dll via a remote IIS server.
This worked but gave me the following error when calling the following URL:
http://domain/PDASYNC/sqlcesa30.dll?diag
SQL Server Mobile Server Agent Diagnostics
2007/07/31 14:26:55
General Information
Item
Value
Server Name
domain
URL
/PDASYNC/sqlcesa30.dll
Authentication Type
Anonymous
Server Port
80
HTTPS
off
Server Software
Microsoft-IIS/6.0
Replication
Allowed
RDA
Allowed
Logging Level
0
Impersonation and Access Tests
Action
Status
ErrorCode
Impersonate User
SUCCESS
0x0
ReadWriteDeleteMessageFile
FAILURE
80070003
SQL Server Mobile Modules Test
Module
Status
ErrorCode
Version
SQLCERP30.DLL
SUCCESS
0x0
3.0.5207.0
SQLCESA30.DLL
SUCCESS
0x0
Unknown
Reconciler Test
Reconciler
Status
ErrorCode
9.0 Database Reconciler
SUCCESS
0x0
8.0 Database Reconciler
FAILURE
0x8007007E
SQL Server Module Versions
Module
Version
sqloledb.dll
2000.86.1830.0
9.0 replrec.dll
2005.90.2047.0
9.0 replprov.dll
2005.90.2047.0
9.0 msgprox.dll
2005.90.2047.0
8.0 replrec.dll
2000.80.760.0
8.0 replprov.dll
2000.80.760.0
8.0 msgprox.dll
2000.80.760.0
After seeing this I looked up what ReadWriteDeleteMessageFile could mean. It appeared to be some NTFS acces problem. But when I checked the security settings, it all seemed to be ok.
Has anyone any idea what else to check? Or is sure that I must have done something wrong?
Thanks in advance,
Arjan
View 3 Replies
View Related
Oct 15, 2015
The SQL Server Agent (MSSQLSERVER) service on server started and then stopped. If i Manually start the services also SQL Server Agent services are stopping automatically.Though I selected Auto Restart SQL Server Agent if it stops unexpectedly, The services are stopping automatically.TCP/IP protocol was enabled for port 1433.Are there any setup I missed?
View 5 Replies
View Related
Nov 16, 2007
Hello,
On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.
When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.
These are not data driven subscriptions.
Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.
Thanks,
SqlNew
View 2 Replies
View Related
May 22, 2002
I get this error in my Agent after starten to synchronise.
I see the access mdb been created and then deleted and renamed to
name_old.mdb
Do you have some help?
Richard
View 1 Replies
View Related
Jan 29, 2008
I have a really odd one here. We have a production server which is running SQL 2000 Enterprise Edition SP3. It has a number of databases which are backed up nightly. Last night all of the back-up jobs failed with the following error: -
Msg 913, Sev 16: Could not find database ID ##. Database may not be activated yet or may be in transition. [SQLSTATE 42000]
The databases are in good shape - no issues to report. When I run the Agent Job code within a Query Analyser session it works fine.
When I try and re-start the back-up from the Agent Job it continues to fail with the same error.
Any ideas?
View 2 Replies
View Related
Feb 9, 2004
the problem is
source:kernel
backup medium ::reportloerror:write failure on backup device\. ape0.operating system error 23(data error(cyclic reduncancy check));
View 1 Replies
View Related
Mar 23, 2007
I am fed up of getting the below error message of repl. atleast once a day.
JOB RUN: 'REPL:1001' was run on 3/23/2007 at 3:00:01 AM
DURATION: 1 hours, 11 minutes, 11 seconds
STATUS: Failed
MESSAGES: The job failed. The Job was invoked by Schedule 421 (Replication agent schedule.). The last step to run was step 3 (Detect nonlogged agent shutdown.).
Please see below for the description of my Replication Job:
------------------------------------
Steps of Job:
1. Distribution Agent startup message.
db: distribution
cmd:
sp_MSadd_distribution_history @perfmon_increment = 0, @agent_id = 126, @runstatus = 1, @comments = 'Starting agent.'
2. Run agent.
cmd:
-Subscriber [GIZMO] -SubscriberDB [TelehopBilling] -Publisher [ROGER] -Distributor [ROGER] -DistributorSecurityMode 1 -PublisherDB [TelehopBilling]
3. Detect nonlogged agent shutdown.
db: distribution
cmd:
sp_MSdetect_nonlogged_shutdown @subsystem = 'Distribution', @agent_id = 126
This Job is executed every hourly and an error is fired atleast once a day notifying failure of this process. Please help me in resolving this issue.
Thanks,
View 4 Replies
View Related
Mar 13, 2007
I have an ASP page I'm testing and this is what I'm trying to do with it. I simply need it to read a SQL table on my server and display data from that table on screen. Thats it. But no matter how many times I tweak my code I keep getting 404 web page not found. Here is the entire pages code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"
<script language="JavaScript">
<!--
var win = null;
function NewWindow(mypage,myname,w,h,scroll){
LeftPosition = (screen.width) ? (screen.width-w)/2 : 0;
TopPosition = (screen.height) ? (screen.height-h)/2 : 0;
settings = 'height='+h+',width='+w+',top='+TopPosition+',left='+LeftPosition+',scrollbars='+scroll+',resizable=no'
win = window.open(mypage,myname,settings)
}
//-->
</script>
</head>
<%
'**************************************************************************
' This page will be used as a test page for Guests and Links
' its purpose is to simply read the guests and links tables then show
' what ever data is in them on the asp page.
'**************************************************************************
' This is the SQL section
<%
set conn=Server.CreateObject("ADODB.Connection")
conn.Provider="Microsoft.Jet.OLEDB.4.0"
con.Open "PROVIDER=SQLOLEDB;DATA Source=IP Address of server here;Initial Catalog=folder name here;User ID=sa;Password=password here"
set rs = Server.CreateObject("ADODB.recordset")
sql="SELECT * FROM T_ProgramGuests WHERE GuestID > 1"
rs.Open sql, conn
%>
<table border="1" width="100%">
<tr>
<%for each x in rs.Fields
response.write("<th>" & x.name & "</th>")
next%>
</tr>
<%do until rs.EOF%>
<tr>
<%for each x in rs.Fields%>
<td><%Response.Write(x.value)%></td>
<%next
rs.MoveNext%>
</tr>
<%loop
rs.close
conn.close%>
</table>
<p>Company Program Archive<left><HR align="left" WIDTH="50%" SIZE="1" NOSHADE>
</left>
<strong><u>Article Title</u></strong><br />
3/7/2007
<br /><br />
<strong>Trust in Cyberspace<br />
</strong><br />
Your reputation follows you, even into cyberspace. Online reviews, peer comments
and user opinions are changing the way we decide to trust other people. Technology
reporter John Doe sees current website ratings leading the way to a new
standard of social acceptance.</p>
</body>
</html>
I'm doing something wrong here but I'm not sure exactly what I'm missing. Is my SQL connection statement wrong? Or is it a syntax issue? Any suggestions?
View 2 Replies
View Related
Jun 14, 2007
Hi Y'all,
When i alter 1 single value in my sql server 2000 sometimes i get following error:
1) [MICROSOFT][ODBC SQL SERVER DRIVER] Communication link failure
After clicking away:
2)CANNOT START MORE TRANSACTION ON THIS SESSION
Maybe someone can help me out on this?
Thanks!
View 1 Replies
View Related
Jan 7, 2004
I am trying to install MSDE using settings I always have to install it:
setup sapwd=password instancename=vsdotnet disablenetworkprotocols=0 securitymode=sql
But it gets through the install, then the progress bar goes backwards and it uninstalled, I tried to enable logging and do /q+ but none of this gives usable information, i have redownloaded the MSDE SP3 install files and this has changed nothing, I know this is a common problem as I have seen a few sites mention it, but i can't seem to find the fix.
View 5 Replies
View Related
Aug 10, 2005
I have not been able to find any details about backup failures forMSSQL 2000. I am researching the following:1. when a backup fails at a certain point during the process does thebackup:A. stop there having recorded some details?B. quit without backing up any of the data it already processed?C. skip the data it cannot read and move on?2. Does the error log record any of the details above? For instance, ifthere is a table that the backup could not write to .bak, does theerror log report exactly where the error was?I need a way to obtain a Backup Exception 'Report' that when a backupfails it can tell me what did not get into the .bak file. I wouldprefer automatic notification. Our Oracle DBs have something setupthat can be run when a piece of the DB does not get backed up lettingthe Oracle DBA know where there are issues.Thank you,Stephanie
View 1 Replies
View Related
Oct 12, 2006
Hi,
I am using ADO in my application to connect and retrieve data from Microsoft SQL Server 2000 SP4. When I start my application, it establishes connection to the server successfully and I am able to retrieve data from the server. here is my test scenario:
1. unplug the network cable from the client machine and put the cable back in after some time. I disconnect from the database in my code when the client machine disconnects from the network
2. Once the client machine comes back on the network, I try to reconnect and retrieve data from the sql server but I get the following error message when I try to execute a sql command:
[Microsoft][ODBC SQL Server Driver]Communication Link failure
This problem occurs only with Window XP SP2. With XP SP1 it works fine. It seems to be problem on the client side as with Windows XP SP1 I do not get this error message at all.
Here are the various details:
1. The firewall is off on the client workstation.
2. the connection string is:
driver={SQL Server};server=AA;uid=BB;pwd=CC;database=DD
where AA = DNS name of server machine where sql server is running.
BB = user name
CC = password
DD= database name
3. The client is remote to the server.
4. I can ping the server machine when the client machine reconnects to the network.
5. I can still telnet the server when the client machine reconnects to the network.
6. client database provider is MDAC odbc.
7. the client and server machines are in the same domain.
8. Shared memory and TCPIP protocols are enabled and TCP is at the top of the list.
9. No alias is being used.
10. Viris scan is not installed.
11. force encriptioned is NOT checked.
Please reply.
View 12 Replies
View Related
Nov 19, 2007
Overview. I am converting over from MSDE to SQL Express. My front end program is unable to connect to the database. To troubleshoot, from the remote computer I tried connecting with the management program and I get the Error 26 unable to connect.
(The connection string worked previously (yesterday) when using MSDE as the server. When I installed SQL Express I named it the same instance as the server name under MSDE. I also use server authtication on both with same user name and password. As stated below I cannot connect using the managment console.)
Here is what I have done: I made sure that the SQL Server configuration has been changed to allow network connections (both TCP and named pipes). I have disable windows firewall on both machines. I confirmed that I can connect from the remote machined to the server by network browsing. Both machines are running XP Proff. There is no other security software running on either machine.
More Info. when attempting to log on I am using the server authntication, I use "sa" as the user id plus my password.
Goal. The front end of database program connects to the server remotely using a program called Hamachi over the internet. This works without a problem on MSDE. But for now I am simply try to connect using the managment program which lets you browse for other serves. When I do this it shows the remote computer, but not the name of the computer but not the SQL server which I type in like the following: "INTELsql1"
What I have not Done: I have not changed any permissions or added any users to the server, since this does not seem necessary. As stated the user of remote machine can connect to the server and change files.
Would appreciate any suggestions or tips. Thanks.
I HAVE READ THE POST FROM MAY 13, 2007 AND TAKEN ALL STEPS SUGGESTED EXCEPT MAKING SURE THE BROWSERS SERVICE IS RUNNING ON SERVER WHICH I WILL DO NOW.
View 2 Replies
View Related
Dec 21, 1999
I have started to see regular occurences of "ODBC error 40001- serialization failure" in the log of a client website (using cold fusion) and would be grateful for any suggestions on likely causes and solutions. The error message also mentions deadlock victims. Thank you in advance.
View 1 Replies
View Related
May 20, 2005
Have a problem with SQL today. I rebooted the server and now it cannot see the E: drive, as per the RAID array setup. Problem being is that all my SQL databases and logs are on this drive. I'm guessing that the error message is just misleading as based on Microsoft this means the server is stand alone and needs to be started with a non-Domain account. Fix the hardware RAID array and hope all is well. Does that sound about right to you?
View 2 Replies
View Related
Aug 16, 2004
In my DTS package, is there any way to pass the task name and error description to another task that gets called on the task's failure?
View 1 Replies
View Related
Apr 11, 2008
Hello,
I'm looping through a set of IP's (sql servers), i'm changing the property ServerName for OLE DB connection dynamically.
So, I'm having a DataFlow Task inside a For each Task.
Data Flow task has OLE DB Source & OLE DB Destination. I've set ServerName of OLE DB Source to a variable which gets updated by For Each Loop.
Till now everything is working fine. However, if a Server (IP) is down it causes OLEDB Source to give an error.
So in my case, if one server is down, it gives error and does not proceed further. I want it to continue with other
servers.
How do i error handle this ?
Thank You,
Sandeep.
View 4 Replies
View Related
Oct 26, 2007
Hi,
I have system with SQL Server 2K5 SE 3042 SP2 . I was able to set up mirroring with primary-mirror-witness arrangement through GUI.
In this company I replaced another DBA who left, and the way our sys admin arranged our logins co-existed in domain for a while. Then sys admin, after mirroring was done, removed my login, renamed other DBA's login with mine, and removed his.
Now I cannot create endpoint, either by t-sql or through GUI: "An implicit login creation has failed. Reason: the login may have been dropped or its name may already be in use, error 1545".
After pressing Start Mirroring the following shows: "Database Mirroring Transport is disabled in the endpoint configuratin, error 1486". The 2nd error understandable in view of the 1st one.
I checked sys.database_mirroring_endpoints, it is empty. Anyone has an idea what this implicit login is, and where to look for it?
Vladimir Kievsky
View 6 Replies
View Related
Aug 7, 2006
my project is insert data to OLE DB destination from csv file.
my question is
how can I get the row number(error row) while constraint failure at the OLE DB destination?
thanks.
View 6 Replies
View Related
Mar 10, 2005
Hi all,
I have created alert to give me information for a backup that was done and since I don't have SQL Mail set up on my servers I use sp_SQLSMTPMAIL using a smtp server. The Alert is kicking off a job called EMAIL DBA which have the code below:
exec master.dbo.sp_sqlsmtpmail @vcTo = 'lwilliams@uhc.com', @vcBody = '
Error: [A-ERR]
Severity: [A-SEV]
Date: [STRTDT]
Time: [STRTTM]
Database: [A-DBN]
Message: [A-MSG]
Check the [SRVR] SQL Server ErrorLog and the Application event log on the server for additional details'
This uses the Agent Token which is very powerful.
The error I get on this job is:
Executed as user: NT AUTHORITYSYSTEM. Line 8: Incorrect syntax near ''. [SQLSTATE 42000] (Error 170). The step failed.
If you look at the code there is no '', so am I missing something or could this error come from the sp_SQLSMTPMAIL.
Please help thanks
Lystra
View 1 Replies
View Related
