Hello,
I was told that on Oracle there's something called an Aggregate Navigator which should be capable of changing the table you're addressing in a query to another table (with aggregate data) and in this way optimize performance in a data warehousing environment.
Is there anything similar in MS SQL Server?
Good morning,
I'm trying to use the Microsoft Clustering Viewer on my custom clsutering plugin algorithm but I'm facing some problems...
Well... The question is: what information should I gather to pass to what methods of the Navigator class to make the Clustering Viewer work ? I'm following the C++ samples.
I've read the tutorial on how to construct a custom plugin viewer on C# but it's not what I'm looking for.
Thanks a lot.
How to set default values for selection list navigator without using parametrized queries for data source view.
View 2 Replies View RelatedCan any1 tell me why i am getting an error
SELECT DISTINCT
--p.voucher,
--p.amount,
p.siteID,
b.siteID,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS OutStandingBalance,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS CashCheque,
SUM((round(b.total,2,2)) - SUM(round(p.amount,2,2))) AS Vouchers
FROM
BillingTotal b,
Payment p
--WHERE
-- s.sitename=@cmb1
--AND p.siteid = s.siteid
-- p.voucher = 0
-- p.voucher = 1
GROUP BY p.siteID,b.siteID
Msg 130, Level 15, State 1, Line 1
Cannot perform an aggregate function on an expression containing an aggregate or a subquery.
I have 2 Dimensions in SSAS (see below end), I want to create a calculated member, named
This_Year_Billable_Objective_Count, with its formula = BillableLastYear*(100+ BillableObjective)/100.
The first factor, Â BillableLastYear is a number, aggregated (sum) from child units.
The second factor, Â BillableObjective is a percent number (for example 28 means 28%), it's not aggregate. It's an dependent value for each unit.
How can I calculate This_Year_Billable_Objective_Count for each unit?
\ able 1
SELECT [UnitKey]
   ,[UnitID]
   ,[UnitName]
   ,[Unit2Name]
   ,[Unit3Name]
   ,[Unit4Name]
[Code] .....
I have a column that has an expression with a runningvalue in it, a "Carrying Cost" for each month. I need to create another column that aggregates the monthly Cost. I can't to do a Runningvalue on the Runingvalue. I can't even do a Sum on the Runningvalue.
View 9 Replies View RelatedI have a table that has 4 colums (id,projectno,date,price)
i want to make a select that returns the sum per project no
i used this query
select projectno,sum(pice) as sum
from supplier
group by projectno
but i want to include additional columns like id and date for the result
but its giving this message:
Column 'supplier.id' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
is there a better way to do so without joining the main table with the upper select query?
Best Regards
I need to get the sum of a field that already has an aggregate function (MAX) performed on it. I am using the following query
Code Snippet
SELECT "tI"."ItemID", MAX("vSS"."ShortDesc") "Short Description",
MAX("tPCT"."FreezeQty") "Freeze Qty", SUM("vSS"."QtyOnHand") "Current Qty",
"tPCT"."BatchKey"
FROM ("vSS" "vSS"
INNER JOIN "tI" "tI"
ON "vSS"."ItemKey"="tI"."ItemKey")
LEFT OUTER JOIN "tPCT" "tPCT"
ON "vSS"."ItemKey"="tPCT"."ItemKey"
WHERE "vSS"."ItemID" = '3002954'
GROUP BY "tI"."ItemID", "tPCT"."BatchKey"
It yields the following results
ItemID
Short Description
Freeze Qty
Current Qty
BatchKey
3002954
SET, WRENCH HEX METRIC
-33
129
42221
3002954
SET, WRENCH HEX METRIC
51
129
42244
3002954
SET, WRENCH HEX METRIC
-31
129
42250
I need to SUM the maximum freeze quantity values per item ID. Therefore for this record, I need the following results:
3002954 SET, WRENCH HEX METRIC -13 129
Can this be done via a subquery? Any assistnance would be greatly appreciated?
Thanks,
DLee
Hi,
I have we have a client who gives their invoices in a flat file format, we import it into a SQL Server table.
Nothing is normalized – everything is repeated in every record. The fields are:
customerNumberInvoice_numberPO_numberQtyDescriptionLine_numberLine_totalFreightTaxInvoice_date
So an if an order has 10 line items, the header information (invoice number, PO number, ivoice date) are repeated on each of the lines
I am writing a query to show the following
Order number, Invoice total, Date
select invoice_no, sum(line_total + freight + tax) as invoiceTotal, customerNumber, Invoice_date from invoices group by invoice_no, Invoice, customerNumber
This works great - for each invoice I get the invoice number, InvoiceTotal, and Date
Then I was asked to add the PO Number – this is where I can’t get it right.
When I added “PO_number� to the query, I got two lines for each invoice
select invoice_no, sum(line_total + freight + tax) as invoiceTotal, customerNumber, Invoice, PO_number from invoices group by invoice_no, Invoice, Sold_To_Cust_No, PO_number
Please help - I need to end up with: invoice_no, invoiceTotal, customerNumber, Invoice_date and PO_number (sequence does not matter)
Thanks
I am attempting to wrie a query that will return aggregate totals from two different tables. The problem is that the TotalForecast totals are way to high. How do I write a query to obtain the correct totals?Table 1 - dbo.QM_ResultsColumns - dbo.QM_Results.Special8, dbo.QM_Results.SessionName, dbo.QM_Results.PersonNumberTable 2 - dbo.PM_ForecastViewColumns - dbo.PM_ForecastView.Hierarchy, dbo.PM_ForecastView.ForecastSelect substring(dbo.QM_Results.Special8,0,6) AS Hierarchy, substring(dbo.QM_Results.SessionName,0,11) As CourseCode,count(dbo.QM_Results.PersonNumber) TotalAssociates,sum(dbo.PM_ForecastView.Forecast) TotalForecastFrom dbo.QM_Results INNER JOIN dbo.PM_ForecastView ON dbo.PM_ForecastView.Hierarchy = substring(dbo.QM_Results.Special8,0,6)where SessionMid in ('96882139', '23620891', '45077427', '29721437')AND substring(dbo.QM_Results.Special8,0,6) in ('EZHBA')Group By substring(dbo.QM_Results.Special8,0,6),substring(dbo.QM_Results.SessionName,0,11)Sample of data returned with my current query.Hierarchy CourseCode TotalAssociates TotalForecastEZHBA CARD167200 1179 141480EZHBA CARD167201 1416 169920EZHBA CARD167202 1119 134280EZHBA CARD167204 99 11880Results when I run aggregate query separatelyActual Total takenHierarchy CourseCode TotalTakenEZHBA CARD167200 393EZHBA CARD167201 472EZHBA CARD167202 373EZHBA CARD167204 33Forecasted Total takenHierarchy CourseCode ForecastEZHBA CARD167200 999EZHBA CARD167201 900EZHBA CARD167202 800EZHBA CARD167204 800
View 4 Replies View RelatedDoes anyone know how to make a query and use an aggregate function? This is my current code...any help would be great.
"SELECT tblTopic.Topic_ID, tblTopic.Subject, MAX(tblThread.Message_date) AS MessageDate, tblThread.Message FROM (tblThread INNER JOIN tblTopic ON tblThread.Topic_ID = tblTopic.Topic_ID) WHERE (tblThread.Message_Date LIKE '%' + @fldGenus + '%' GROUP BY tblTopic.Topic_ID, tblTopic.Subject, tblThread.Message">
Also, How can i limit the query to only bringing up 5 records?
I'm trying to get a datagrid to show the 5 most recent forum posts for a particular category.
Thanks.
I have a table that is used for employee evaluations. There are six questions that are scored either 1, 2, 3, 4, or 5. I want to tally the responses on a page, but I wonder if I can do it without 35 separate calls to the database (I also want to get the average response for each question). I know I can do "SELECT COUNT(intWorkQuality) AS Qual1 FROM dbo.Summer_Project_Req WHERE intWorkQuality = '1' " and then "SELECT COUNT(intWorkQuality) AS Qual2 FROM dbo.Summer_Project_Req WHERE intWorkQuality = '2' " and so on. But can I somehow do the aggregating at the page level, and just refer back to a datasource that uses a generic statement like "SELECT intWorkQuality, intDepend, intAnalyze, intWrite, intOral, intCompatibility FROM dbo.Summer_Project_Req"? If I can, I am not sure what type of control would be best to use or what syntax to use to write the code-behind. I would like the results to be displayed in a grid format. Thanks in advance for your help.
View 3 Replies View RelatedI was doing a SUM on my returned rows and i found that what i really want is an aggregate bitwise OR on all the returned rows. Do you know what's the function for that?
Thank you
I have two tables tb1 with item and qtyOnHand and a second table tb2 with item and qtyOrdered I am trying without success to make this happen;select sum (onHand-Ordered) from (select sum (qtyOnHand) from tb1 where item = RD35 group by item) as onHand, (select sum (qtyOrdered) from tb2 where item = RD35 group by item) as OrderedI kind of gathered it would work based on this http://weblogs.asp.net/jgalloway/archive/2004/05/19/135358.aspxI have also tried this;select tb1.item from (select sum (qtyOnHand) from tb1 where item = RD35 group by item) as onHand, (select sum (qtyOrdered) from tb2 where item = RD35 group by item) as Ordered, sum (onHand-Ordered) as available from tb1 where tb1.item = RD35Any ides, there are multiple rows of each item in each table tb1 is inventory with several different locations and tb2 is an orders table.
View 3 Replies View RelatedWhat I'm trying to solve:
I have an application that generates SQL queries, and sometimes uses
DISTINCT where the result set has no dupe rows. In terms of database
resources, I'm trying to figure out if it's worth it to change to app to be
smart enough to not use DISTINCT where it won't serve any purpose, or
whether to let it do the DISTINCT and save added complexity to the query
building application. I.e. what is the cost of DISTINCT where there are no
dupe rows?
What I want to know:
Can someone explain how the stream aggregate operator actually goes about
doing its work?
Does this always create a temp table for sorting and discarding duplicates
(for DISTICNT)? If the answer is "no or sometimes", how does it do so in
the case where a temp table is not involved? I noticed the the estimated
I/O for this operator was zero for some queries I wrote agains pubs. Does
this mean that the optimizer believes the temp table needed will fit
in-memory and creates it in-memory? Or does the estimated I/O figure not
included disk writes for work tables?
tia for any info
Bill
Hi all,
I have a table with the following fields:
carrier,calc_date,ind_id,rcf
I need to run a query to get the following result(by carrier and for each calc_date, calculate the percentage of all individuals who have rcf greater than 0.73):
carrier,calc_date,count of ind with rcf > 0.73, count of all individual, percentage of individuals with rcf's greater than 0.73.
does anyone have an idea of how to achieve that result?
Thanx
MS Access provides FIRST and LAST aggregates to select the first and last values from a group.
These aggregates apparently do not exist in TSQL.
I am after a workaround for the lack of these aggregates.
Any advice would be appreciated.
Hi, I am wanting to query the identifier field via the MAX function.
eg.
need to retrieve the BookID of the greatest Book Price
Code:
SELECT BookID,MAX(BookPrice)
FROM Book
this errors, with:
Column 'BookID' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
I realise there are other ways such as referencing back on the same table eg.
Code:
SELECT BookID FROM Book WHERE BookPrice = (SELECT MAX(BookPrice) FROM Book)
but was hoping would be a more direct way, is there a specific direct use of MAX for this purpose or another SQL command?
Greetings!
I'm hoping for a little insight for a novice.
Here's what I have:
1 table that looks like this...
Code:
rep_id answer
1 2
1 1
2 1
3 0
3 1
3 1
4 2
What I want is a recordset returned as ... (columns that tally the 1s and 2s respectively with the rep's id#)
Code:
rep_id total1 total2
1 1 1
2 1 0
3 2 0
4 0 1
What I can do so far is get individual recordsets returned for either total1 or total2 but not together.
Here's what I'm using for these...
Code:
SELECT rep_id, COUNT(answer) as total1
FROM myTable
WHERE answer = '1'
GROUP BY rep_id
and
Code:
SELECT rep_id, COUNT(answer) as total2
FROM myTable
WHERE answer = '2'
GROUP BY rep_id
So how do I form a SQL statement that will combine the 2 columns I have created into 1 joined by the rep_id?
To make it a little stickier there may be some nulls in the existing answers but hopefully that is not going to bung me up.
Any help will be thankfully received!!!
Hi,
How can I aggregate a top 5 count across two satellite tables?
e.g. Orders and downloads table each have multiple entries for the same customer ID I would like to count the orders and add them to the downloads count too e.g. 5 orders added to 10 downloads giving 15 as the total for this customer and get a total 'site activity' result which I would like to select the top 5 for.
Any help or pointers would be a great help!
Thanks.
Hello, I need to use last() aggregate function in MS SQL Server 2005 but it is not built in.How to replace this functionality?Thanks.
View 4 Replies View RelatedI have three tables, tblschedule, tblresource and tblemployeename.
in tblschedule table there are scheduleID, resourceID and employeeID. In tblResource there are ResourceID and ResourceName. In tblemployeename there are EmployeeID, EmployeeFName and EmployeeLame. I want to have a report that show how many times the resource has been reserved by employee. i would like to have a report. Look like the following:
ResourceName EmployeeFName EmployeeLName (Or use EmployeeName) Number of record.
How to write a query? I use asp.net as front end.
Thank for your help.
I need to find an aggregate for several fields in a row
e.g. Max(date1, date2, ..., dateN)
I can pass this to a delimited string,
pass the string to an UDF that returns a table
and run Max(tablefield) on that UDF
Unfortunately I can only get this working for 1 delimited string at a time
Ideally I would want to include the function in a SELECT statement, e.g. something like
SELECT t1.a, dbo.MaxOfFieldValues(t1.d1+','+t1.d2+...+','+t2.dN )
FROM t1
I got it working with the following two udfs, but I am sure visitors here have solved this a bit smarter:
ALTER Function [dbo].[MaxOfFieldValues]
(
@ListOfValues varchar(8000)
, @delimiter varchar(10) = ','
)
RETURNS VARCHAR(8000)
AS
BEGIN
--Need to get the maximum changedate first
--pass the fields as one value (a delimited string)
--and calc the max
declare @result varchar(8000)
declare @remainder varchar(8000)
set @remainder = @ListOfValues
declare @NoOfItems int --items = delimiters +1
SET @NoOfItems = (len(@ListOfValues) - Len(Replace(@ListOfValues,@delimiter,''))/Len(@ListOfValues))+1
declare @counter int
set @counter =1
set @result = dbo.TakePart(@remainder,@delimiter,@counter)
WHILE @counter <= @NoOfItems
BEGIN
set @counter = @counter + 1
IF @result < dbo.TakePart(@remainder,@delimiter,@counter)
BEGIN
SET @result = dbo.TakePart(@remainder,@delimiter,@counter)
END
END
RETURN (@result)
END
ALTER FUNCTION [dbo].[TakePart]
(
@param varchar(8000)
, @delimiter varchar(10)
, @NumPart int
)
RETURNS varchar(8000)
AS
BEGIN
--Note: maybe smarter to whack the delimiter to the end of the string to avoid the IF statement
declare @result varchar(8000)
declare @remainder varchar(8000)
declare @counter int
set @result = ''
set @remainder = @param
set @counter = 1
WHILE @counter < @Numpart
BEGIN
SET @remainder = SUBSTRING(@remainder,CHARINDEX(@delimiter,@remaind er,1)+Len(@delimiter),8000)
SET @counter = @counter +1
END
IF @counter > (len(@param) - Len(Replace(@param,@delimiter,''))/Len(@delimiter))
BEGIN
SET @result = @remainder
END
ELSE
BEGIN
SET @result = LEFT(@remainder,CHARINDEX(@delimiter,@remainder,1) -1)
END
RETURN @result
END
Cheers
Drio
Hai frns small help needed.
I have a table called sample and i have the following requirement. i.e i need sum(credit) group by ssn no.
One special condition is as follows:
For each distinct ssn if "flag" has the same CX value,then out of all the records with the same CX value, the highest "credit" value is added to the sum for that "ssn" and the rest are ignored.
If while adding "credit" to the sum and if "credit" value is equal to zero then "sum" value is used for summing else "credit" value is used.
Can any one help me out in trying this logic. I have tried but i could'nt able embed the conditions inbetween the Sql statetment.
Here is the query is used
select * from sample
idssncreditflagsem
11010C90
21014C93
31014.5C92
41013.5C11
51024.2C33
61030C12
select ssn,flag,sum(case credit when 0 then sem else credit end) as sum from sam2
group by ssn,flag
ssn flag sum_val
101C13.5
103C12.0
102C34.2
101C98.5
The above output is wrong one.
Expected output
101 4.5+3.5=8.0
102 4.2
103 2.0
Any help would be appreciated
Regards,
I have implemented a login audit on a particular system which catches the users login details, including their application logon name and NT username.
What I want to do is report on users who have logged on to the software using someone else's workstation (i.e. logged on to more than one workstation).
Here's some sample stuff to play with
DECLARE @logins table (
loginName char(20)
, ntUsername char(25)
, loginDate datetime
)
--Insert test data. Please note that loginName and ntUsername are rarely the same
INSERT INTO @logins (loginName, ntUsername, loginDate)
SELECT 'Amy', 'Amy', '20070101' UNION
SELECT 'Amy', 'Amy', '20070102' UNION
SELECT 'Amy', 'Amy', '20070103' UNION
SELECT 'Bob', 'Bob', '20070101' UNION
SELECT 'Bob', 'Bob', '20070102' UNION
SELECT 'Bob', 'Amy', '20070103' UNION --Bob has logged on using 2 different NT accounts
SELECT 'Cal', 'Cal', '20070102' UNION
SELECT 'Cal', 'Amy', '20070102' UNION --So has cal
SELECT 'Dom', 'Dom', '20070102' UNION
SELECT 'Dom', 'Dom', '20070102'
Any ideas? I just can't think of the logic needed to get what I want.
Any extra info needed - just ask!
Cheers
This query not start, why?
Code:
[SQL] SELECT
DTZZ,
[NUM],
[ENER],
MAX ([MYDATE]) AS max_date
[Code] .....
[Err] 42000 - [SQL Server]An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference.
Hi
I have a query where I need to use an aggregate function MAX in where clause, I know that MAX cannot be used in a Where clause because it is an aggregate function. Can anyone help me out in writing this query?
SELECT * FROM ACCOUNT_REVIEW AR INNER JOIN
QUESTION_RESPONSE ON
AR.Review_ID = QUESTION_RESPONSE.Review_ID
WHERE (MAX(AR.Review_Date) IS NULL)
I need it asap. Thanks in advance,
K
I want to return only the sum total of each of the following two columns generated by this query, but when I wrap them in SUM() I get an error stating that I can't use an aggregate function on an aggregate or subquery.
Is there another approach that I might take to sum these?
SELECT CASE soitem.fmultiple
WHEN 1 then
(SELECT funetprice FROM sorels
WHERE (sorels.fsono = shmast.fcsono)
AND sorels.frelease
= SUBSTRING(shitem.fsokey,10,3)
AND sorels.fenumber
= shitem.fenumber) * shitem.fshipqty
ELSE
(SELECT top 1 funetprice FROM sorels
WHERE (sorels.fsono = shmast.fcsono)
AND sorels.finumber
= soitem.finumber) * shitem.fshipqty
END as ExtPrice,
CASE CAST((shitem.fshipqty) as int)
% nullif(CAST(inmast.fnusrqty1 as int),0)
WHEN 0 then
(CAST((shitem.fshipqty) as int) /
nullif(CAST(inmast.fnusrqty1 as int),0))
ELSE
(CAST((shitem.fshipqty) as int) /
nullif(CAST(inmast.fnusrqty1 as int),0)) + 1
END as BoxCount
FROM shmast INNER JOIN shitem ON shmast.fshipno = shitem.fshipno
INNER JOIN soitem ON (soitem.fsono = shmast.fcsono)
AND (Convert(Int,soitem.finumber) = Convert(Int,SUBSTRING(shitem.fsokey,8,10)) / 1000)
LEFT JOIN somast ON (shmast.fcsono = somast.fsono)
LEFT JOIN inmast ON (soitem.fpartno = inmast.fpartno)
WHERE (shmast.fbl_lading='00000000000000003784')
AND (shitem.fshipqty > 0)
I would like to find the first transaction_date with the criteria below and return all transactions after. i would need to use the seqn number since many of the transactions could occur on the same day.
SELECT c.MEMBER_TYPE
, c.DATE_ADDED
, h.ID
, h.ACTIVITY_TYPE
, h.TRANSACTION_DATE
, h.UF_1
, min (h.seqn)
FROM
[code]....
I've written a query which was working fine prior to me trying to add a sub-query. I'm trying to make sure I am getting the max disconnect date for each account that has been issued a refund. When I attempt to run the modified query, I receive the following error:
Msg 147, Level 15, State 1, Line 43
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference.
Here's the whole query:
IF OBJECT_ID('TEMPDB..#TMP1A') IS NOT NULL DROP TABLE #TMP1A
SELECT
BC.ACCTCORP,
BD.HOUSE,
BD.CUST,
BC.BATCH,
[Code] ....
How can I return the following information? The aggregate function is throwing it off. Is there a better way? Thanks.
select
Orders.OrderID,
Orders.OrderDateTime,
Orders.BillLastName,
Orders.BillCompany,
Orders.SubtTotal,
Orders.DiscountTotal,
Orders.Tax,
Orders.ShipCost,
Orders.OrderTotal,
Sum(Orders.SubTotal - Orders.DiscountTotal) as ActualMerchandise
Customers.SalesID
from Orders
join Customers
on Orders.CustID = Customers.CustID
where OrderDateTime >= '6/1/2006'
and OrderDateTime <= '6/30/2006'
order by SalesID, OrderDateTime
hi guys,
here is the table structure
__id__|__boxnumber__|__createddate__|
___1__|______78_____|___5/12/06_____|
___2__|______79_____|___26/12/06____|
___3__|______78_____|___15/12/06____|
so here goes,
____________________________________
select boxnumber,max(createddate)
from table
group by boxnumber
------------------------------------
The above query has one problem as I want to display the id as well
but I cant do this obviousely..
------------------------
select boxnumber,max(createddate),id
from table
group by boxnumber
---------------------------------------
Any help possible to solve this..
Thanks fellars
Can i combine two aggregate functions in one select statement?Like sum(count (field 1) * field 2) as tcost.Can i do something like that in my query?
thanks!
Funnyfrog