I am attempting to wrie a query that will return aggregate totals from two different tables. The problem is that the TotalForecast totals are way to high.
How do I write a query to obtain the correct totals?
Select substring(dbo.QM_Results.Special8,0,6) AS Hierarchy,
substring(dbo.QM_Results.SessionName,0,11) As CourseCode,
count(dbo.QM_Results.PersonNumber) TotalAssociates,
sum(dbo.PM_ForecastView.Forecast) TotalForecast
From dbo.QM_Results INNER JOIN dbo.PM_ForecastView
ON dbo.PM_ForecastView.Hierarchy = substring(dbo.QM_Results.Special8,0,6)
where SessionMid in ('96882139', '23620891', '45077427', '29721437')
AND substring(dbo.QM_Results.Special8,0,6) in ('EZHBA')
Group By substring(dbo.QM_Results.Special8,0,6),
substring(dbo.QM_Results.SessionName,0,11)
Results when I run aggregate query separately
Actual Total taken
Hierarchy CourseCode TotalTaken
EZHBA CARD167200 393
EZHBA CARD167201 472
EZHBA CARD167202 373
EZHBA CARD167204 33
Forecasted Total taken
Hierarchy CourseCode Forecast
EZHBA CARD167200 999
EZHBA CARD167201 900
EZHBA CARD167202 800
EZHBA CARD167204 800
Hi, I have we have a client who gives their invoices in a flat file format, we import it into a SQL Server table. Nothing is normalized – everything is repeated in every record. The fields are: customerNumberInvoice_numberPO_numberQtyDescriptionLine_numberLine_totalFreightTaxInvoice_date So an if an order has 10 line items, the header information (invoice number, PO number, ivoice date) are repeated on each of the lines I am writing a query to show the following Order number, Invoice total, Date select invoice_no, sum(line_total + freight + tax) as invoiceTotal, customerNumber, Invoice_date from invoices group by invoice_no, Invoice, customerNumber This works great - for each invoice I get the invoice number, InvoiceTotal, and Date Then I was asked to add the PO Number – this is where I can’t get it right. When I added “PO_number� to the query, I got two lines for each invoice select invoice_no, sum(line_total + freight + tax) as invoiceTotal, customerNumber, Invoice, PO_number from invoices group by invoice_no, Invoice, Sold_To_Cust_No, PO_number Please help - I need to end up with: invoice_no, invoiceTotal, customerNumber, Invoice_date and PO_number (sequence does not matter) Thanks
I have two tables tb1 with item and qtyOnHand and a second table tb2 with item and qtyOrdered I am trying without success to make this happen;select sum (onHand-Ordered) from (select sum (qtyOnHand) from tb1 where item = RD35 group by item) as onHand, (select sum (qtyOrdered) from tb2 where item = RD35 group by item) as OrderedI kind of gathered it would work based on this http://weblogs.asp.net/jgalloway/archive/2004/05/19/135358.aspxI have also tried this;select tb1.item from (select sum (qtyOnHand) from tb1 where item = RD35 group by item) as onHand, (select sum (qtyOrdered) from tb2 where item = RD35 group by item) as Ordered, sum (onHand-Ordered) as available from tb1 where tb1.item = RD35Any ides, there are multiple rows of each item in each table tb1 is inventory with several different locations and tb2 is an orders table.
I would like to find the first transaction_date with the criteria below and return all transactions after. i would need to use the seqn number since many of the transactions could occur on the same day.
SELECT c.MEMBER_TYPE , c.DATE_ADDED , h.ID , h.ACTIVITY_TYPE , h.TRANSACTION_DATE , h.UF_1 , min (h.seqn) FROM
I have two tables ItemHistory and ItemStock. I would like to write a query which checks last years history and let us know if we have enough items in stock this year for a given span date.
First, It should get all items from @ItemHistory where WHERE DateSold >= '1/10/2007' AND DateSold < '1/11/2007' and then checks if corresponding items are found in @ItemStock, and then returns all the ItemID where sum(@ItemStock.Quantity) < sum(@ItemHistory.Quantity)
Thank You.
Here is the DDL and DML
DECLARE @ItemHistory TABLE ( ItemID INT, Quantity INT, DateSold DATETIME ) INSERT INTO @ItemHistory SELECT 12, 18, '2007-01-10' UNION ALL SELECT 12, 18, '2007-01-10' UNION ALL SELECT 26, 12, '2007-01-10' UNION ALL SELECT 28, 06, '2007-01-10' UNION ALL SELECT 29, 06, '2007-01-10' UNION ALL SELECT 30, 06, '2007-01-10' UNION ALL SELECT 31, 06, '2007-01-10' UNION ALL SELECT 31, 06, '2007-01-10' UNION ALL SELECT 32, 12, '2007-01-10' UNION ALL SELECT 33, 01, '2007-01-10' UNION ALL SELECT 33, 06, '2007-01-10' UNION ALL SELECT 36, 01, '2007-01-10' UNION ALL SELECT 52, 12, '2007-01-10' UNION ALL SELECT 83, 01, '2007-01-10' UNION ALL SELECT 36, 12, '2007-01-10' UNION ALL SELECT 37, 01, '2007-01-10' UNION ALL SELECT 38, 12, '2007-01-10' UNION ALL SELECT 17, 01, '2007-01-10' UNION ALL SELECT 17, 08, '2007-01-10' UNION ALL SELECT 12, 20, '2007-02-20' UNION ALL SELECT 26, 10, '2007-02-20' UNION ALL SELECT 30, 08, '2007-02-20' UNION ALL SELECT 31, 12, '2007-02-20'
DECLARE @ItemStock TABLE ( ItemID INT, Quantity INT ) INSERT INTO @ItemStock SELECT 12, 20 UNION ALL SELECT 12, 10 UNION ALL SELECT 14, 48 UNION ALL SELECT 17, 24 UNION ALL SELECT 19, 36 UNION ALL SELECT 19, 72 UNION ALL SELECT 20, 72 UNION ALL SELECT 26, 24 UNION ALL SELECT 28, 12 UNION ALL SELECT 29, 12 UNION ALL SELECT 30, 12 UNION ALL SELECT 31, 18 UNION ALL SELECT 32, 20 UNION ALL SELECT 32, 68 UNION ALL SELECT 33, 10 UNION ALL SELECT 35, 18 UNION ALL SELECT 36, 46 UNION ALL SELECT 36, 40 UNION ALL SELECT 37, 30 UNION ALL SELECT 38, 10 UNION ALL SELECT 38, 33
I have a database table that contains rows containing defect data. The two columns I'm interested in are device and severity. Device is the name of an item that contains the defect, and severity can be one of three values. I'd like to query the table so it shows the device, and the number of instances of each of the three values for that device. For example, the result table should look like this:
I have a table similar to the following: ID ¦ Name ID ¦ Period From ¦ Period To ¦ Percentage ¦ --------------------------------------------------------------------------- Important - Each person can have more than one entry. What I am trying to do is get the last percentage that each person obtained. The only way I have been able to do this is by the following: SELECT * FROM myTable LEFT OUTER JOIN ( SELECT NameID, MAX(PeriodTo) as PeriodTo FROM myTable GROUP BY NameID) t1 ON myTable.NameID = t1.NameID WHERE myTable.PeriodTo = t1.PeriodTo
I was wondering if there was another way of doing this, or whether this is an efficient method of doing this kind of query. Jagdip
I want to return a list that contains each employee's ID, the date of their last payrate adjustment, and their current payrate. Note that in the table below, employee 1002 was a bad boy in March of 2005, and his hourly rate was reduced to 14.00.
I am trying to use the following syntax and it is saying I can't use an aggregate function in a subquery. I can't use a GROUP BY in this case because if another field in the project table (such as status) is different, that project will show up twice.So in this case I am using this syntax to show the most recent quote within the project.
SELECT PROJECT.*, QUOTE.QuoteDate, QUOTE.QuoteCode FROM PROJECT LEFT JOIN QUOTE ON PROJECT.ProjectID = QUOTE.ProjectID WHERE QUOTE.QuoteDate=(SELECT Max(Q.QuoteDate) FROM QUOTE Q WHERE Q.ProjectID = PROJECT.ProjectID);
My goal here is to show the most recent quote within each project (there can be multiple revisions of a quote within each project). I want to show other fields such as the status of the quote, but if the status is different between quotes, the GROUP BY on that field will cause it to be listed more than once. All I want to show is the most recent quote for each project.
I'm working on a fairly complex query, and to avoid exploding my brainany further, I'm going to keep this simple with an example of what I'mtrying to do...Let's say you had a table of customers and a table of ordersAnd you had data that looked like this:CustomersCustID CustName-------------------------------1 Billy2 JohnOrdersCustID Amount PaidYN-------------------------------1 $2 12 $3 01 $4 11 $2 02 $5 0And you wanted a report that looked like this:Customer TotalPaid TotalUnpaid------------------------------------------Billy $6 $2John $0 $8How would you write a query to generate this report?
Quote: select distinct a.memberFirstName, a.memberLastName, c.ChapterName, d.divisionName, count(f.memberID) as numMembers FROM Members a INNER JOIN groupLeaders b ON a.memberID = b.memberID Inner JOIN Chapters c ON c.chapterID = b.chapterID LEFT JOIN divisions d ON d.divisionID = c.divisionID Inner Join groupsOfEight e ON e.groupLeaderID = b.groupLeaderID Inner Join groupOfEightMembers f ON f.groupOfEightID = e.groupOfEightID Group BY a.memberFirstName, a.memberLastName, c.chapterName, d.divisionName Order By divisionName, numMembers
This query returns me the names of all of my Group Leaders, their Chapter, Division, and the number of members they have selected to be in their group.
Now, instead of the number of members in each Group I would like to know the total number of Members in each division to appear in the count.
[NOTE: All chapters have a division, linked by a divisionID in the "Chapters" table -- I need to get a count of all the "ChapterMembers" [chaptermembers is a table also] that are in the Division.
Here is the query I started to build before I ran into serious trouble:
Quote: select a.divisionName, count('c.memberID') as numMembers From Divisions a Inner Join Chapters b On b.divisionID = a.divisionID Inner Join chapterMembers c ON c.chapterID = b.chapterID Left Join Members d ON d.memberID = c.memberID LEFT Join groupLeaders e On e.memberID = d.memberID Group By a.divisionName
This particular query returns only the DivisonName and the number of Members in the division as expected. However, when I try to select the information for the GroupLeader (first & last name) I am forced to add memberFirstName to the Group By statement which changes my Count...
Have I done an okay job of explaining the problem?
The goal here is to select all of the GroupLeaders first & last name, their chapterName, divisionName, and the total number of members in the division.
I have a table as below: COMPUTERNAME, COUNTER, REASON WXP-13Failed WXP-1113Failed WXP-38Failed WXP-910Failed WXP-117Success
What I would like to do is create a percentage of Success vs. the Failed for the same Computername. Problem is when I use Group by I cannot tell the COUNTER of the Success anymore. This is what I have been using:
SELECT COMPUTERNAME, SUM(COUNTER) AS COUNTERTOTAL FROM ReturnTable GROUP BY COMPUTERNAME
Thank you. The above query actually targets a result table from another query, but that should not matter.
I have a query where I have customers, date they ordered a swatch, date they ordered an item, and eh date diff between the two. I want to show the MIN date diff for each customer, and also show the swatch date and item date as well. But to use the MIN aggregate, it forces me to group everything, where I just want to group by customer, and have the 2 dates tag along, because i only want one record per customer. What is the easiest way for me to accomplish this?
I'm trying to write a query that returns last 30 days data and sums the amount by day. However I need to do it for every year not just the current one(I need to go back as far as 2000).
declare @t table (id int identity(1,1), dt datetime, amt MONEY) insert into @t (dt, amt) select '2014-11-30 23:39:35.717' as dt, 66 as amt UNION ALL select '2014-11-30 23:29:16.747' as dt, 5 as amt UNION ALL select '2014-11-22 23:25:33.780' as dt, 62 as amt UNION ALL
[Code] ....
--expected output select '2014-11-30' AS dt, 71 AS Amt UNION ALL select '2014-11-22' AS dt, 62 AS Amt UNION ALL select '2014-11-20' AS dt, 66 AS Amt UNION ALL select '2014-11-18' AS dt, 102 AS Amt UNION ALL
When i am running below snippet execution plan is showing constant scan instead of referring subquery table.
I want to know how this query working. and why in execution plan there is no scan /seek which will basically indicate that particular table is getting referred.
select count(*) from AÂ where exists (select count(1) from B where A.a=B.a)
execution plan has to show scan or seek for subquery. Surprisingly, output is coming as expected.
To create a strike file for a text file output, I piped the output of a query throught a mulitcast. One output is the actual flat file, the other output is the strike file. The next task for the strike output is an aggregate count and sum functions. If the original query returns no records, the count shows zero, but the sum shows NULL. Further down the process I have to pad out the values with zero's, but that NULL is causing problems. How do I convert the Null to either an empty string, or a value of zero? Thanks
I have a a Group By query which is working fine aggregating records by city. Â Now I have a requirement to focus on one city and then group the other cities to 'Other'. Â Here is the query which works:
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'Â From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Kansas City 800 Columbia 700 Jefferson City 650 Joplin 300
When I add this Case When statement to roll up the city information it changes the name of the city to 'Other Missouri City' however it does not aggregate all Cities with the value 'Other Missouri City':
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'Â From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Other Missouri City 800 Other Missouri City 700 Other Missouri City 650 Other Missouri City 300
I have a column that has an expression with a runningvalue in it, a "Carrying Cost" for each month. I need to create another column that aggregates the monthly Cost. I can't to do a Runningvalue on the Runingvalue. I can't even do a Sum on the Runningvalue.
Hi,Suppose I have a table containing monthly sales figures from my shopbranches:Branch Month Sales-----------------------London Jan 5000London Feb 4500London Mar 5200Cardiff Jan 2900Cardiff Feb 4100Cardiff Mar 3500The question I am trying to ask is this: in which month did each branchachieve its highest sales? So I want a result set something like this:Branch Month----------------London MarCardiff FebI can do a "SELECT Branch, MAX(Sales) FROM MonthlySales GROUP BY Branch" totell me what the highest monthly sales figure was, but I just can't figureout how to write a query to tell me which month corresponded to MAX(Sales).Ideas anyone?Cheers,....Andy
I have a table that has 4 colums (id,projectno,date,price) i want to make a select that returns the sum per project no i used this query select projectno,sum(pice) as sum from supplier group by projectno
but i want to include additional columns like id and date for the result but its giving this message: Column 'supplier.id' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
is there a better way to do so without joining the main table with the upper select query? Best Regards
Does anyone know how to make a query and use an aggregate function? This is my current code...any help would be great. "SELECT tblTopic.Topic_ID, tblTopic.Subject, MAX(tblThread.Message_date) AS MessageDate, tblThread.Message FROM (tblThread INNER JOIN tblTopic ON tblThread.Topic_ID = tblTopic.Topic_ID) WHERE (tblThread.Message_Date LIKE '%' + @fldGenus + '%' GROUP BY tblTopic.Topic_ID, tblTopic.Subject, tblThread.Message"> Also, How can i limit the query to only bringing up 5 records? I'm trying to get a datagrid to show the 5 most recent forum posts for a particular category. Thanks.
I have a table that is used for employee evaluations. There are six questions that are scored either 1, 2, 3, 4, or 5. I want to tally the responses on a page, but I wonder if I can do it without 35 separate calls to the database (I also want to get the average response for each question). I know I can do "SELECT COUNT(intWorkQuality) AS Qual1 FROM dbo.Summer_Project_Req WHERE intWorkQuality = '1' " and then "SELECT COUNT(intWorkQuality) AS Qual2 FROM dbo.Summer_Project_Req WHERE intWorkQuality = '2' " and so on. But can I somehow do the aggregating at the page level, and just refer back to a datasource that uses a generic statement like "SELECT intWorkQuality, intDepend, intAnalyze, intWrite, intOral, intCompatibility FROM dbo.Summer_Project_Req"? If I can, I am not sure what type of control would be best to use or what syntax to use to write the code-behind. I would like the results to be displayed in a grid format. Thanks in advance for your help.
I was doing a SUM on my returned rows and i found that what i really want is an aggregate bitwise OR on all the returned rows. Do you know what's the function for that?
What I'm trying to solve: I have an application that generates SQL queries, and sometimes uses DISTINCT where the result set has no dupe rows. In terms of database resources, I'm trying to figure out if it's worth it to change to app to be smart enough to not use DISTINCT where it won't serve any purpose, or whether to let it do the DISTINCT and save added complexity to the query building application. I.e. what is the cost of DISTINCT where there are no dupe rows?
What I want to know: Can someone explain how the stream aggregate operator actually goes about doing its work?
Does this always create a temp table for sorting and discarding duplicates (for DISTICNT)? If the answer is "no or sometimes", how does it do so in the case where a temp table is not involved? I noticed the the estimated I/O for this operator was zero for some queries I wrote agains pubs. Does this mean that the optimizer believes the temp table needed will fit in-memory and creates it in-memory? Or does the estimated I/O figure not included disk writes for work tables?
I was told that on Oracle there's something called an Aggregate Navigator which should be capable of changing the table you're addressing in a query to another table (with aggregate data) and in this way optimize performance in a data warehousing environment.
I need to run a query to get the following result(by carrier and for each calc_date, calculate the percentage of all individuals who have rcf greater than 0.73):
carrier,calc_date,count of ind with rcf > 0.73, count of all individual, percentage of individuals with rcf's greater than 0.73.
does anyone have an idea of how to achieve that result?
