I'm trying to use the aggregate transformation to sum my orders table unit price and quantity with a grouping of state but i can't see how to add the sub grouping. My order table has the following fields of interest Unit Price (Money), Quantity (Integer) and State (Varchar)
ID
Unit Price
Quantity
State
1
$2.19
500
AZ
2
$29.99
33
WA
3
$1000.00
1
WA
4
$1.20
7
WA
When i run the aggregate i want the output to be grouped by state
Hello, everyone!Does anyone know how I can pull additional field in a database whenthe max() of one field is pulled. For example:================================================== ===SELECT TOP 200 foreign_id, MAX(recordcreateddatetime) ASmax_recordcreateddatetimeFROM table1GROUP BY foreign_id================================================== ===Here I am trying to pull the records that have the latest date foreach foreign_id. The result set above will pull foreign_id andmax_recordcreateddatetime but I needed to also have it display onemore field, current_status like this:================================================== ===SELECT TOP 200 foreign_id, MAX(recordcreateddatetime) ASmax_recordcreateddatetime, current_statusFROM table1GROUP BY foreign_id================================================== ===The problem however is that SQL wants me to add this field to GROUP BYor use an aggregate function with it and I don't want any aggregatefunction processing - I just want current_status to show up there forme to see. How do I do this?Thank you for any input in advance!Roumen.
Installed the Northwind database for data to practice with. I'm trying to combine data from several tables to make the orders table more readable. Meaning, I'm trying to replace the EmployeeID field with the combination of the firstname and lastname fields from the Employees table. Everything works fine until I try to sum the Unit price field from the [Order Details] table. Using just a SUM() function or the Select statement below causes the error and any combination of fields in the Group By command don't correct it. It's clear that I'm doing something wrong, I'm just not sure how to get the data I want or use the group by command properly. Query below:
Select o.OrderID, c.companyName, e.firstname + ' ' + e.lastname EmployeeName, o.orderdate, s.companyName, o.Freight, o.shipName, o.ShipAddress, (Select Sum(od.UnitPrice) from [Order Details] od where od.OrderID = o.OrderID)as Amount from orders o, customers c, Employees e, Shippers s, [Order Details] od where o.CustomerID = c.CustomerID
[Code] ....
Running the first query (with the select statement) works, but returns a row for each of the the items that was ordered for that OrderID and NOT using the Group By. I would like to have the SUM() of the items ordered in one row. Is this possible?
I'm trying to update a varchar field using SUM. I keep getting the error that the sub query returns more than one value.
UPDATE CIRSUB_M SET TRM_DMO = SUBSTRING(TRM_DMO,1,11) + (SELECT CAST(SUM(COPIES) AS VARCHAR(5)) FROM CIRSUB_M WHERE BIL_ORG = '02' AND CRC_STS IN ('R','P','Q','T') GROUP BY PUB_CDE, DNR_NBR) WHERE BIL_ORG = '02' AND CRC_STS IN ('R','P','Q','T')
Example
PUB_CDE DNR_NBR COPIES TRM_DMO THN 000000092637 100 A THN 000000092637 200 B THN 000000082455 100 A THN 000000082455 200 B THN 000000051779 100 A
I am having trouble with a particular query that is beyond my scope of understanding.
Basically I need to pull sales records based on the following criteria:
I have CustomerID, InvoiceNumber, ContractEndDate, MobileNumber, etc..
Customers recontract their mobile phone plans through us, and we have a new sales record for each time they recontract.
For example, CustomerNumber 123 has recontracted 3 times..
once on 2006-01-01, then on 2007-02-12, and finally on 2008-02-15..
So they have a 12 month contract each time.. then come in to recontract it.
So.. a customer has a single Customer Detail record, but may have many sales records attached. And a customer may have several sales for the SAME mobile phone number.
Currently to pull ALL sales records for all customers, my query is this:
Code:
SELECT xxx.CustomerID AS xxx_CustomerID, xxx.Invoice AS xxx_Invoice, yyy.PhoneType AS yyy_PhoneType, yyy.PlanType AS yyy_PlanType, yyy.ContractEnds AS yyy_ContractEnds, yyy.MOB AS yyy_MobileNumber
FROM dbo.SaleControl xxx INNER JOIN dbo.SaleDetails yyy ON xxx.Invoice = yyy.Invoice
WHERE yyy.ContractEnds IS NOT NULL AND xxx.CustomerID IS NOT NULL
We want to get a list of customers that we can call to recontract, based on the ContractEnd field.
However, we want UNIQUE mobile phone numbers, with the LATEST ContrtactEnd date.
So, Customer 123 has 6 sales, for 2 unique Mobile numbers, the sql may be like:
Code:
SELECT MAX(yyy.ContractEnds) AS LatestCED, yyy.MOB FROM dbo.SaleControl xxx INNER JOIN dbo.SaleDetails yyy ON xxx.Invoice = yyy.Invoice WHERE xxx.CustomerID='123' GROUP BY yyy.MOB
Now, this works fine, and of course if i remove the WHERE clause, it collects all unique mobiles, with latest ContractEnd date for each, for all customers. (Customer 123 displays 2 mobile numbers, each with the LATEST ContractEnd date)
BUT i need this information ALONG WITH the other fields (xxx.CustomerID, xxx.Invoice, yyy.PhoneType, yyy.PlanType) and i have tried a few ways of doing it, but can't get my head around it..
Keep getting errors about Aggregate functions and Group By clause, and i understand why i am getting them, just cant think of any alternative query.
I have a problem with an SQL-query and I don't know what the best solution would be to solve the problem.
/*INSERT INTO WERKS ( WERKS.Z8601, WERKS.Z8602, WERKS.Z8603, WERKS.Z8604, WERKS.Z8605, WERKS.Z8606, WERKS.Z8607, WERKS.Z8608, WERKS.Z8609, WERKS.Z8610, WERKS.Z8611, WERKS.Z8621, WERKS.Z8622, WERKS.Z8623, WERKS.Z8624, WERKS.Z8625, WERKS.Z8626, WERKS.Z8627, WERKS.Z8628, WERKS.Z8629, WERKS.Z8630, WERKS.Z8631, WERKS.Z8632) */ SELECT 0, Stati.z4414, Stati.z4402, '', '', '', Isnull((select Srtas.z02 from Srtas where Srtas.z00 = Stati.z4400 and Srtas.z01 = Stati.z4414), ''), Isnull((select Klant.z0102 From Klant where Klant.z0101 = Stati.z4402), ''), '', '', '', sum (Case when Stati.z4407 = 200609 then Stati.z4409 Else 0 End), sum (Case when Stati.z4407 = 200609 then Stati.z4410 Else 0 End), sum (Case when Stati.z4407 = 200509 then Stati.z4409 Else 0 End), sum (Case when Stati.z4407 = 200509 then Stati.z4410 Else 0 End), sum (Case when Stati.z4407 Between 200510 and 200609 then Stati.z4409 Else 0 End), sum (Case when Stati.z4407 Between 200510 and 200609 then Stati.z4410 Else 0 End), sum (Case when Stati.z4407 Between 200410 and 200509 then Stati.z4409 Else 0 End), sum (Case when Stati.z4407 Between 200410 and 200509 then Stati.z4410 Else 0 End), sum (Case when Stati.z4407 = 200609 then Stati.z4411 Else 0 End), sum (Case when Stati.z4407 = 200509 then Stati.z4411 Else 0 End), sum (Case when Stati.z4407 Between 200510 and 200609 then Stati.z4411 Else 0 End), sum (Case when Stati.z4407 Between 200410 and 200509 then Stati.z4411 Else 0 End) FROM STATI WHERE (Stati.z4402 Between '40000' AND 'ZONE6') AND (Stati.z4414 Between '2005028' AND '2005028') AND (Stati.z4417 = 'A') GROUP BY Stati.z4414, Stati.z4402
I get the following error:
Msg 8120, Level 16, State 1, Line 25 Column 'STATI.Z4400' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
I know it has something todo with the select on the table SRTAS, but what's the best way to solve this problem without the chance of getting a wrong result.
The SELECT on SRTAS is to get the "description" of STATI.Z4414 who's stored in the table SRTAS. I only want to group on the fields that will be inserted in WERKS.Z8602, WERKS.Z8603, WERKS.Z8604, WERKS.Z8605, WERKS.Z8606. So adding STATI.Z4400 to the GROUP BY would give me wrong results?
This query is dynamicly generated from within my program from what the user selected.
Also, if there are better ways to write the query, I would be happy to get some hints and tips, but if possible without stored procedures.
I am using SQL 2005. I have some data from an old application that did not follow the rules for normalization. The table is for Invoices, and the table allows for 13 purchase items per record. So in each row of my table I have a non-unique integer field itemID, itemID1, itemID2 ... itemID12. For each itemID I also have "lbs_total" and "line_total" (which is price * lbs_total) - so itemID, lbs_total, line_total ... itemID1, lbs_total1, line_total1 ... etc. It's a mess, I know.Each row has a unique Customer Number ("cno") and an Invoice Date ("inv_date"). My proc needs to allow for params for the item number, and a start date and end date for BETWEEN on the inv_date.I also need to get the aggregate for the lbs_total and the line_total.
Well adding it to a group by or function skews the result set. How to write this query so it displays as I need it to? This is what I have thus far, and it works as it should UNTIL I add in the line of
cast(cte.[C] As float)/cast(sum(cte.[C]) over() as float)*100 As [Rate1],
Presents the error of: Msg 8120, Level 16, State 1, Line 35 Column 'cte.[C]' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
This is my full on query -- with 3 CTE's involved to get me the actual result set I am after.
;with cte as ( select [state], case when exists (select 1 from table2 R where R.centername = d.centername) then 1 else 0 end as [L], case when exists (select 1 from table3 C where C.centername = d.centername) then 1 else 0 end as [C] FROM maintable d ),
I was helped on an earlier question to complete my mail merge with the following code: selectYourTable.* fromYourTable inner join --DistinctNames (selectMax(PrimaryKey) as PrimaryKey fromYourTable group by FirstName, LastName) DistinctNames on YourTable.PrimaryKey = DistinctNames.PrimaryKey Basically this code queries my mailing list and ensures that i do not send mutiple letters to one person at the same address who might be in the batabase more than once. However, the reason they are in there more than once is that they might own additional properties. Anyway, I have a column that includes their acreage for each property in each record and I would like to add those up for each person during my query. Thought anyone? Thanks!
best solution for this stored procedure query.I'm getting the following error:
Column 'dbo.Applicants.submitted' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause. Here is my select query:
Code: SELECT DISTINCT DATENAME(MONTH, submitted) AS mon, MAX(submitted) AS SubmitDate FROM dbo.Applicants WHERE ((CASE WHEN MONTH(submitted) > 8 THEN YEAR(submitted) + 1 ELSE YEAR(submitted) END) = @AcYr) ORDER BY SubmitDate
The submitted field is a date field.I don't want to add the submitted field to Group By as I want to group by month not date.Is there any solution to avoid grouping by date?
While running the below query, getting the error: Am I missing any of the columns to include in the SELECT column_list?
Msg 8120, Level 16, State 1, Line 1
Column 'sys.master_files.database_id' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
<code> select a.[Database Name],a.[Type],a.[Size in MB],b.LastUserUpdate from ( SELECT database_id,[Database Name]= DB_NAME(database_id), [Type]= CASE WHEN Type_Desc = 'ROWS' THEN 'Data File(s)' WHEN Type_Desc = 'LOG' THEN 'Log File(s)' ELSE Type_Desc END ,
I'm doing a group by in an aggregate transformation. I have say 6 columns in the output and I'm grouping on all of them - how can I get duplicate rows in the output? If I do the same select and group by in SQL on the source data I don't get any duplicate rows. In fact out of 6000+ rows I only get 2 duplicates.
I'm trying to write a query to select various columns from 3 tables. In the where clause I use a set of conditions, but most important condition is that I only want to see all results from the different columns where the ph.ProdHeaderDossierCode contains at least 25 lines of processed hours. I tried this with group by and having, but I constant get error messages on all other columns that I want to see: "is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause". How can I make this so I can see all information I need?
I have a a Group By query which is working fine aggregating records by city. Now I have a requirement to focus on one city and then group the other cities to 'Other'. Here is the query which works:
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars' From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Kansas City 800 Columbia 700 Jefferson City 650 Joplin 300
When I add this Case When statement to roll up the city information it changes the name of the city to 'Other Missouri City' however it does not aggregate all Cities with the value 'Other Missouri City':
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars' From [Output-MarketAnalysis] Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active' Group by [City]
Here is the result:
St. Louis 1000 Other Missouri City 800 Other Missouri City 700 Other Missouri City 650 Other Missouri City 300
I have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.
'GroupName' column has multiple values - X,Y,Z,......
I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...
Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName' values:
Example:
Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of ABC column must be ABC-Z
ie the column name of ABC (Clm ABC) must be dynamic as per the GroupName values (X,Y,Z....)
Page1:
GroupName Clm ABC-X
X
Page2:
GroupName Clm ABC-Y
Y
Page3:
GroupName Clm ABC-Z
Z
I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....
However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,
I get the following error:
Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope
I need to get the X, Y, Z ... in each page for the column ABC.
I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...
I have a column that has an expression with a runningvalue in it, a "Carrying Cost" for each month. I need to create another column that aggregates the monthly Cost. I can't to do a Runningvalue on the Runingvalue. I can't even do a Sum on the Runningvalue.
I've posted a feedback with Microsoft to see if we can get them to fix the issue described below, but so far no one from Microsoft has commented to let us know what they're doing about this problem! I'm posting this here to see if maybe we can get more people to rate this feedback or chime in on what a pain it is! Please feel free to add your own comments or how you had to work around this issue and whether or not you think this is something Microsoft should be addressing NOW.
Provide Individual Page Numbering per Group and Total Pages per Group
Currently in a Reporting Services report, you can't readily reset the page number for each group in a table, nor can you display the total number of pages per group. For example, if I'm printing invoices and each invoice is a separate group, I'd like to be able to print "Page 1 of 5" , "Page 2 of 5" etc. for the first invoice, then "Page 1 of 3" when the next invoice begins, and so on. This was easy in Crystal Reports. I realize that Crystal Reports has a two-pass process that enables that kind of pagination. However, this is REALLY important functionality that's just missing from Reporting Services and I'm hoping you'll provide it REALLY SOON! Yeah, I know there are work-arounds if you can know exactly how many rows of information there are on each page. But gosh! That's not practical, especially if you have second level groups inside the main group or text blocks in rows that can 'grow' to more than one line. I've read a couple of work-arounds, but none of them works correctly and consistently when more than one user is running the same report or when you print the report while you're looking at it on the screen. I still may need access to the overall report page number and the overall total number of pages, so don't get rid of that. It's just that if you're doing this already for the entire report, I don't see why you can't do it per group! Lots of people have been asking for this for years, and I don't understand why it hasn't been implemented.
I've read a few articles on this topic, but no one has come up with a decent work around. My theory is that Microsoft should be addressing this immediately. This is major functionality that's just plain missing from SSRS and should have been there from the start. If anyone from Microsoft can let us know what's going on with this issue or if anyone would like for me to clarify this further, feel free to let me know.
I have an SSRS report with groups that when exported to excel contains drill-in's (plus marks on left side). The issue I have is that for all the groups in the drill-in, those cells become merged. I want to keep the group drill-in but have the cells UNMERGED. I have heard this can be done with the RDL XML but I don't know what to modify to accomplish this.
I'm having a fight with Reporting Services at the minute when trying to compute an average at the row group level for a value summed in a column group.I have the following column groups:
Year Month Date
And the following row groups:
Region Product SubType (hidden, data at the date level is summed to Product)
At the moment I'm computing the average for SubType for each Date at the Product level (giving a decimal value), so for each day I end up with a nice average, that works. However I am unable to average that average over the whole Year for a Product. The issue being that I'm trying to combine Row Groups (Product) and Column Groups (Date/Year)
select top 15 count(*) as cnt, state from table group by state order by cnt desc
[code[...
Can the above three queries be combined into one and still be fast, if so how?What i am trying to go is an item count, by group, similar to ones Inbox in Outlook.
I have a need to show a row inside a table group to simulate a header row for the data rows inside the group. The table will not have a real header or footer. Thanks for the help.
I have one domoain in the forest. The domain level is set to Windows 2000 native mode and forest level is set to mixed mode. My SQL server 2005 server joined to this domain. I added a brand new domain local group and add a normal user account to this domain local group. I login to the SQL server 2005 server and make a query "SELECT * FROM sys.login_token". I cannot see my domain local group in sys.login_token. However, if I add my account to a global group, I can see it there.
Then, I setup another forest. This time, I have domain level set to Windows 2003 mode and forest level is set to Windows 2003 native mode. I do the same testing. This time, I can see my domain local group in sys.login_token.
Why does SQL server 2005 has this limitation? Is it a bug?
HiI am new to SQL and am having a problem. I need to fix my query to do the following...2) get a total of the number of rows returned. DECLARE @StartDate varchar(12)DECLARE @EndDate varchar(12)DECLARE @Region varchar(20) SET @StartDate = '01/01/2002'SET @EndDate = '12/31/2008'SET @Region = 'Central' SELECTA.createdon,A.casetypecodename,A.subjectidname,A.title,A.accountid,A.customerid,A.customeridname,B.new_Region,B.new_RegionName FROM dbo.FilteredIncident AINNER JOIN dbo.FilteredAccount B ON A.customerid = B.accountid WHERE (A.createdon >=@StartDate AND A.createdon <= @EndDate)AND (B.new_RegionName = @Region)AND (A.casetypecode = 2)
I'm new to MSSQL 2005 and want to get a summary of a log table. I want to count all the rows for each date based on a DATETIME field called 'post_date' that holds the date and time of each record's creation.
this is the best I can come up with:
Code:
SELECT DISTINCT(LEFT(post_date,11)) AS post_date, COUNT(DISTINCT(LEFT(post_date,11))) AS total_posts FROM log_directory_contacts GROUP BY post_date
The results show each date but the count column ('total_posts') returns '1' for every row even when I know their are more than 1 record on that date.
