Alias For SQL 2000 Named Instance
Aug 12, 2002
We have a two node activepassive SQL Server 2000 cluster SP2 running on Window 2000 advanced server SP2. Everything is working fine including failover. Today we migrated over our 7.0 databases to the SQL cluster and they attached fine and upgraded fine but we would like to shutdown the 7.0 server and bring up the clustered SQL Server under the old name. We will be running 3 instances of SQL Server 2000 on the Cluster so at least 2 of these will be named instances like this: "Virtual serverinstance". Is it possible to create an alias for this SQL Server so that we could access the server under the original name of the server???
Thanks!!!
Bruce
View 1 Replies
ADVERTISEMENT
Jul 23, 2014
I am trying to setup a client alias to connect to a named instance on another server.
TITLE: Connect to Server
------------------------------
Cannot connect to fred.
------------------------------
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
[URL]
The network path was not found
------------------------------
BUTTONS:
OK
------------------------------
I have set up the alias on the server and as expected it works. On the client side I have used the SQL Server Client Network Utility to configure the client side alias but no luck
I am using TCP/IP with a specific port ..
By the way the SQL is SQL Server 2012 Ent and the O/S is Windows 2012 R2 minshell
View 9 Replies
View Related
Oct 10, 2001
I am trying to set up a Named Instance of SQL 2000 on the same machine that has a default instance of SQL 7.0. The setup always completes and I am able to register the Named Instance of the SQL Server with which it was installed on. However, when I try to connect the users to the database, with both windows and SQL authentication, I receive a SQL server not found error. I have tried an alias setup as well as physically specifying the port number in settup up an ODBC connection.
Has anyone ran into similar problems?
Also, has anyone been able to successfully complete the process as mentioned above?
View 1 Replies
View Related
Nov 15, 2007
The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
View 2 Replies
View Related
Jan 20, 2006
Hi,
I am struggling connection to a named instance of SQL 2000 (SP4) from another machine but without any success. I get an error message saying that the server does not exist or access is denied.
The security configuration in this named instance is the same as the default instance (also 2000) and the remote machine can connect to it successfully.
I also configured the aliases in Client Network Utility in the client machine and set the server (machine) name and the port number used by the instance - but no help.
I use osql and Query Analyzer to connect to it, but I cannot connect by any of them.
Connecting locally, in the machine where the instance is installed, is successful.
The same behaviour appears when I try to connect to another instance on the machine which is 2005.
Something with the named instance is problematic.
Any help?
View 3 Replies
View Related
Jun 26, 2007
We are trying to quickly put together what needs to be accomplished to install a named instance of SQL Server 2000 on an existing production server (also running SQL Server 2000). It appears as if the install will require a reboot. Can the reboot be postponed until after-hours without impacting the default instance of SQL Server?
Also, I see that if certain services are stopped prior to installing sp4 that you can avoid a reboot. However, if we are unable to stop these services (DTC, for example) without impacting the default instance of SQL Server, will the default instance of SQL Server experience any issues if we postpone the post-sp4 reboot until after hours?
Thanks!
Michelle
View 3 Replies
View Related
Jun 1, 2008
moving to a new sql server box because of a problem with the SAN its connected to.
started my named instance in single user mode and restored master. sqlserve.exe -c -m -s ovops
now the instance won't start. tried starting it with the -t3608 switch.. won't start!!
Its because my drive configuration is different on the new server than it was on the old server, I cannot start the instance because it is expecting model, msdb, temdb and all of the user databases on drives that don't exist?? what can I do?????
View 4 Replies
View Related
Jul 23, 2005
Here's my situation:I have an ODBC DSN setup for Timberline Data (An accounting packagethat uses pervasive.sql) on my sql box. I set up a linked server usingthe supplied timberline odbc driver. I have two sql instances setup,the default instance and a named instance. On the default instance,the linked server works great no matter who is logged in using it (allauthentication is NT integrated). However on the named instance onlythe NT account that the MSSqlserver$NAMED service is logged in undercan utilize the linked server. All others get a ODBC error:"error 7399: OLE DB Provider 'MSDASQL' reported an error. AccessDenied. OLE DB error trace [OLE/DB Provider 'MSDASQL'IUnknown::QueryInterface returned 0x80070005: Access Denied.]."Far as i can tell, both instances are setup the same, except that oneis the default and one is a named instance.Why the different results for the default instance vs a named instance.Any ideas?Thanks
View 5 Replies
View Related
Mar 27, 2008
Greetings,
I have a VB 2003 .NET application that I wrote for a customer that connects to a named instance of SQL 2000. Until recently it has been working fine. Lately the program either pops a timeout failure within a few seconds or a general network error. I've increased the connection timeout settings to 90 seconds but the error still pops within a few seconds. I'm thinking something has changed in the environment that prevents a clean connection to the named instance of SQL server.
How should this issue be troubleshoot to determine the problem and what areas need to be looked at?
Thanks
View 3 Replies
View Related
Feb 17, 2004
I have a SQLSERVER INSTANCE A, to which I want to connect from a Client as TEST, using the SQL Server alias functionality under the client network utility program. The alias is working fine with the TCPIP connection but it fails when I try to connect to the SQL Server using the named pipes. In my case I'm trying to connect to a named instance of SQL Server 2000 using the following pipe: \servernamepipemssql$instancenamesqlquery
Any help?
View 2 Replies
View Related
Jul 22, 2015
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
View 5 Replies
View Related
Mar 20, 2014
I have a 3 node cluster on which I have installed SSAS as it's own insntance. I have created this as a named instance and can connect to it by serverinstance if I'm on the server itself. However from my desktop I get the error saying instance was not found on server name.
I have defined an alternate port and setup firewall rules and can connect via server:port but not serverinstance. Prior to making this change SSAS was running on default port of 2383 and I could connect just by servername.
I have read many articles for previous versions saying that clustered SSAS will always use 2383 and that you must connect just using servername. However and this is were it gets strange. I have a 2 node UAT cluster with SSAS setup exactly the same way I've described above and I can connect from my desktop as serverinstance.
Should I be able to connect as serverinstances for a named clustered instance in 2012 ?
View 4 Replies
View Related
Feb 19, 2007
Hi, I have a task in hand to migrate (upgrade) from SQL2K named instance to SQL2K5 default instance. There are many intranet applications touching current SQL2K. I would like to perform this upgrade such that I don't have to touch any application code - meaning I don't have to change the connectionstring to point to new Default instance. How can I achieve this?
So, in otherwords, here is what I want to achieve:
Current Server: SQL2K: SERVER_AINSTANCE_A (named instance)
Upgraded Server: SQL2K5: SERVERB (default instance)
If I have both default, I could achive this by setting up DNS alias after migration done so that any call for SERVER_A would point to SERVER_B. But in my case, I don't have SERVER_A, I have named instance. Is there any solution?
Regards,
Vipul
View 1 Replies
View Related
Jul 26, 2007
Hi All , I have been racking my head on this for the last two days and really it should be a no brainier. Anyways I can only assume that I€™m missing something here but...
In a nut shell I am attempting to connect to a new SQL Alias that i have created by simply adding the following in the client network utility
Current SQL server name DASQL
Default instance
Alias Name: TASQL
Server Name: DASQL
Pipe Name: \DASQLpipesqlquery
I can connect the new alias via the local (server consol) yet when i attempt to connect remotely it times out as if it can't find the server.
Any Thought?
Thanks
View 5 Replies
View Related
Mar 2, 2007
I have a server with sql server 2005 installed as the default instance -- I have a piece of software that needs SQL2000 to be the default instance. Is there a way other than install new sql2005 named instance and move databases to rename my SQL2005 instance from <machinename> to <machinename>sql05 for example?
Bryan
View 2 Replies
View Related
Aug 24, 2006
I have SQL Server 2000 Standard Edition (sp3a) running on a windows 2003 (sp4) Server.
It is a Production Server with 3 NAMED Instances and NO Default Instance.
Does anyone know if I can rerun the SQL Server Install and add a DEFAULT Instance to this box without disrupting the other Named Instances???
View 5 Replies
View Related
Oct 30, 2007
I installed SQL Server 2005 recently on a cluster. I didn't go for the default instance and instead I named the instance option. Now I would like to migrate everything from the named instance to the default instance, which I haven't yet installed.
Is this an easy process? What about the logins and the maintenance plans and jobs? Is there anything else I need to be aware of?
View 1 Replies
View Related
Apr 13, 2007
Hi
I've never had to do this, but when I downloaded the Web Workflow Approvals Starter Kit, it requested that I install the database into a User Instance of .SQLEXPRESS.
Now the problem is, I've installed it onto a default instance, so I was wondering whether you can create a named instance on top of a default instance... and if so, how would you do that?
Cheers
Chris
View 3 Replies
View Related
Jan 17, 2007
If you were asked to install SQL 2005 on a machine, would u install a default instance or a named one? And why would u choose one over the other?? Also, r there any issues with using a default instance?
Thank you for all your help.
View 6 Replies
View Related
Oct 25, 2006
Hello,
I've got a question about failover with the database mirroring.
I have 3 servers, 2 with SQL 2005 and 1 with SQL Express as witness.
After getting some problems to install database mirroring with Windows authentification, i had to create an authentification by certificate.
All goes well but my problem is about my primary instance SQL alias.
The alias on the primary doesn't follow on the secondary when the primary is down.
I've searched on forums and in the internet SQL web sites, but i didn't find anything.
I create another alias on the secondary but i don't know how to modify it in T-SQL...
I would like to know if there's any solution to modify an SQL instance alias by transact-SQL? or if anyone has already install on its servers, a fail over automatic with one instance alias with data mirroring in T-SQL?
Thank you all for your help...
View 6 Replies
View Related
Sep 4, 2003
I am running SQL2k SP3 with a default instance. I have recently added a second, named instance. When I try to connect to the named instance through Enterprise manager, it often times out. I never get a timeout accessing the default instance. Is there something I missed when setting up the second instance that is causing this access delay?
Thanks,
Ken Nicholson
View 1 Replies
View Related
Mar 18, 2008
What is the easiest way to check wether a server has named instance or not? Is there a command from DOS?
------------------------
I think, therefore I am - Rene Descartes
View 4 Replies
View Related
Jan 3, 2004
Hi,
How can i connect to Named Instance of MSDE on remote server from Enterprice Manager in my local computer ?
Instance name is Helm
I can connect inside server like
osql -S -E .Helm
But how i access from remote machine using Enterprice Manager ?
Regards,
Yujin Boby
View 1 Replies
View Related
May 26, 2004
Hi, all.
To use Named instance on the same machine, Do I need to check any license issue?
My Company has one server license and wants to use Named instance.
thank you..
View 2 Replies
View Related
Apr 5, 2007
Hi,
I have sql2005 sp1 active-active installation.
I've fixed the named instance port.
I can't reach it from clients with i'ts name (servernameinstancename) .
I manage to rech it only by using servername, ip-port.
The sql browser has the following error:
"The configuration of the AdminConnectionTCP protocol in the SQL instance GILBOACL is not valid."
your help is appreciated!
Shahar
View 1 Replies
View Related
Feb 3, 2006
Hi,
I did install SQL-server developer edition. During the installation it asked me the name of de instance. I let the installation create the default Named instance.
Now I want to add an instance with a new name. What is the best way to do this? Is this the same as creating a Notification service?
Doeb
View 6 Replies
View Related
Mar 27, 2008
I have sql2000 and sql2005 on one machine.
When I try to query a named instance of sql2005 from query analyzer in sql 2000 I recieved an error regarding an entry not being in the sysservers table. I added an entry pointing to the new install of sql2005. Now I get an error message saying
Server: Msg 170, Level 15, State 1, Line 2
Line 2: Incorrect syntax near '-'.
My server name is BB-SERVER1 It definitly does not like the hyphen. Any thoughts?
Changing the server name is not really an option.
Greg
View 5 Replies
View Related
Jan 9, 2007
We want to rename our instance and I understand there isn't a straightforward way to do so. I'm prepared to run SQLEXPR again to create the new named instance. However, I'm not clear on how to remove the other named instance once the data files have been moved over. I do not want the old service "SQL Server (<old_named_instance>)" to be running. I would also like the files "C:Program FilesMicrosoft SQL ServerMSSQL.1" removed along with the registry entries for this instance.
I tried running SQLEXPR with a /? option but that invoked the installer and did not give me the command line options. Is there a simple way to remove a specific named instance? Thanks.
View 5 Replies
View Related
Oct 25, 2007
Hi everybody,
Here is my problem: I'm setting up a new computer with SQL 2005 to replace the old one with SQL 2000. What I want to do is to transfer all the data from the SQL Server 2000 to the 2005 then rename the 2005 from the temp name to the same name as the SQL 2000, so all the pages can connect to the 2005 instead of the 2000. The problem right now is that all of the pages that that are being published within the network is calling the SQL 2000 by it instance only eg: Data Source = MainSQLServer. With the SQL 2005 I can't just call the instance in the connection string, it requires that the computer's name and the instance be provided, eg: \computer_nameinstance_name. I can't go back and edit every single one of the pages being served. So I need to configure the SQL 2005 in a way that all of the existing pages can access it with the same connection string that is in use right now to connect to the SQL 2000.
Thanks for the help!
View 3 Replies
View Related
Sep 7, 2007
As understand it, the only way to add another SQL Express 2005 named instance is to run SQLEXPR32.EXE again. However, when you to, right at the end, you get the following error message:
"An installation package for the product MS SQLK Server VSS Writer cannot be found. Try the installation again using a valid copy of the installation package 'SQLWriter.msi'"
So, I deleted all named instances, and the repeated the procedure and did not get this error and it installed fine. Obviously, I would not be able to delete all instances, but in this case it didn't matter.
So, here are my questions:
Question 1) Am I correct you must rerun SQLEXPR32.EXE to create a new named instance? (I think the answer is yes)
Question 2) Is there a way to rename an existing named instance? (I think the answer is no)
Question 3) The install/uninstall for SQLEXPR32.EXE is incredibly buggy. I have spend days trying to remove an named instance with no succes. Once your remove all named instances from Control Pannel, you stll have not removed SQL Express 2005. How do you remove it? We are considering other avenues because of the incredible problems with this product. Also, we inadvertantly installed SQL Express 2005 Advanced Services, when we meant to install SQL Express 2005, so we would like to uninstall Advance Serviuces and reinstall SQL Express 2005
Question 4) I am switching from the Outlook Express newsgroups to these groups. In the context of these groups, what is the difference betwee a Forum and a Newsgroup?
Thanks
Bob
View 1 Replies
View Related
Mar 12, 2008
Hi There
I cannot find anything online or in BOL about the proper format for a named instance in the routing address.
is it simply
ADDRESS = 'TCP://SERVERNAMEINSTANCENAME:4026'
or do you need to provide the port number for the instance.Not sure if TCP recognises the instance part?
Thanx
View 3 Replies
View Related
Dec 7, 2007
Hi all,
I have some questions regarding Clustering.
(1) Can we create Default Instance & Named Instance in the clustering environment (i.e.) two instances in clustering on same hardware.
The idea here is , to put some highly transactional databases on default instance ( and giving 5 CPU's to Default instance ) and on the Named Instance ( giving 3 CPU's for Named Instance) in CLUSTERING ENVIRONMENT.
(2) Can anyone guide me , how can we restrict the instances to take 5 Cpu's & 3 Cpu's repectively Iin CLUSTERING ENVIRONMENT.
Thanks.
View 2 Replies
View Related
Sep 14, 2004
Thanks for Microsoft's Windows XP Service Pack 2 and Windows Server 2003 that make the security much stronger. However, besides the invisible benefit so far, I have become the victim of this security policy.
I have several named instances of SQL 7/2000 installed in my machine. They are not visible out of the Microsoft new fire wall. I need to access the instances from outside the fire wall, but I don't know which port I should open for the instances.
From SQL online, the default instance of SQL server is connected through TCP/IP by default port 1433. I could successful open that port and made the default instance visible to outside. However, the port 1433 doesn't work for the named instances. SQL online said, the port for named instance is dynamically (by default) chosen the first time the instance is started. So, actually, I have no way to know the port.
Is there anyway that I can check the database or somewhere to get the port that is used by the named instance?
Thanks for any input and recommendation.
View 4 Replies
View Related
