All Measures Show No Values

May 29, 2008



I made a number of dimension and calculated member mods and notice that all now no base or calculated measures display values, they just show blanks in the browser and query window. To try to isolate, I've
(1) removed every dimension and calculated member
(2) verified there are no defaultmembers for dimensions
(3) verified there are no dimension attributes set to IsAggregatable = False

(4) verified there are no deploy or script errors
(5) fully processed every dm and fact
(6) verified there are dim and claim records loaded with values in all appropriate columns

When I process the cube, it shows that rows are read, etc... All that looks normal. Just when I browse or query, all measures display as blanks or nulls.

What could cause this behavior? Any ideas on how to futher isolate? I can go to a backup but very concerned that this can happen with no error messages or warnings, so I want to find the cause.

View 4 Replies


ADVERTISEMENT

Analysis :: How To Show Measures Dynamically For Different Dimensions

May 4, 2015

Actually I want to do distinct sum on a measure group, please find the below table as sample

XL Measure group
LK     OK      Amount
1        10         100
1         11        100
3          30       250
3          31       250
3          32       250

For the above measure group two dimensions have relationships, One is L dimension which is having relationship with XL on LK and One is O dimension which is having relationship with XL on OK. If I drag L dimension attributes  it should show results as below

LK LName  Amount
1     A         100
3     C         250

But above results are coming as below

LK LName  Amount
1     A         200
3     C         750

If I drag O dimension attributes along with L dimension, it should show results as below.

LK  LName   OK     OKName   Amount
1        A         10      XYZ         100
1        A         11      UVW        100
3        C         30      PQR         250
3        C          31     KLM         250
3        C          32     TUV         250

I used formula Measures.Amount/Measures.Count, this formula is not showing correct results when I don't drag any dimensions, it is showing results for All member  as 425, but it should show as 350.

So I made a same change ([L].[LK].Currentmember, Measures.Amount)/([L].[LK].Currentmember,Measures.Count), this worked fine but performance is very low and so stopped working on this.

Atlast I did the measure group like this

LK     OK      LAmount   OAmount
1        10         100        100
1         11        0            100
3          30        300        300
3          31        0            300

I want to show Measures.LAmount when only L dimension is querying and want to show OAmount when both L dimension and O dimension are querying. Is this possible ?

View 3 Replies View Related

Two Measures With The Same Dimension But With Differents Values

Jan 23, 2007

hello at every body.. well i have a problem. i want to create a report which will present two measures vued with the same dimsneion but with different values.for example i want to present sales bu country and i want to present at the report the sales for the US and the sales for UK at the same time

indicator1=([Measures].[sales],[country].[UK]),

indicator2=([Measures].[sales],[country].[US]).

Further more i want to create two parameters which take the same values in order to change the values of indicators..

i have creted the datasets for the parameters and the parameters but i don't know how to code the main data set in order to change the values of indicator 1 with the values of parameter 1 and the values of indicator 2 with the values of parameter 2

thank u for your responce

View 1 Replies View Related

Power Pivot :: How To Convert Measures As Text To Actual Measures

Jul 5, 2015

I have an old model that unfortunately had to be re-establish. 

In order to save time, I thought that I can export all my measures and paste it as measures in my new model. 

I used the following technique to export the measures from the old file: [URL] ....

How to use the output and create the identical measures in my new model, without the need to manually write each one of them?

View 7 Replies View Related

Analysis :: MDX To Show Top Ten Values And One Last Row With Sum Of Resting Values

Dec 14, 2011

I have to show 11 rows:

The first 10 rows would be the top ten values for a Measure and a Dimension that has 20 members. I can get it with the following MDX expresion:

SELECT
TopCount(EXCEPT([Dim Category].[Dim Category].AllMembers,[Dim Category].[Dim Category].[All]),10,[Measures].[Value]) ON ROWS,
[Measures].[Value] ON COLUMNS
FROM [My Cube]

View 4 Replies View Related

Getting Textbox To Show All Values

Apr 15, 2007

Is there a way in rs to have a textbox more than the first value when it is dragged on the rs form when creating a report? currently when I drag a text box on the rs form, it only shows the first record on a page/form. There are twenty records on the table where the first value came from. How can I make so that twenty text boxes representing twenty records appear on twenty different pages. In other words, I am trying to build a report with a non - tabular structure that can repeat on different pages.

View 4 Replies View Related

How To Make NULL Values Show Last

Jun 23, 2014

I have the following table records structure:

Code:
drop table ##t1
create table ##t1(col1 int, col2 int, col3 int, col4 int)
insert into ##t1(col1 , col2, col3, col4)
values (1,2,3,4),
(5,6,7,8)

[Code] .....

I can't figure out how to put all nulls at the bottom and have all of my records on the top.

View 11 Replies View Related

How To Show Variance In Column Values

Feb 19, 2014

This is my table structure

--=====
create table calculate(
ID int identity (1,1),
PreviousYear_Profit float not null,
)

insert into calculate values (12500)
insert into calculate values (22700)
insert into calculate values (18500)
insert into calculate values (25800)
--======

I want to calculate variance and expected output is

ID PreviousYear PriorVersion Variance
1 12500 sum(PreviousYear) PreviousYear-PriorVersion
2 22700 sum(PreviousYear) PreviousYear-PriorVersion
3 18500 sum(PreviousYear) PreviousYear-PriorVersion
4 25800 sum(PreviousYear) PreviousYear-PriorVersion

I don't have PriorVersion and Variance columns.

PriorVersion will be like sum(PreviousYear)
Variance will be (PreviousYear - PriorVersion)

I can query if I have column, since I don't have these two column how could I possibly achieve the output using my existing table schema.

View 1 Replies View Related

Show Variable Values At Runtime

Nov 14, 2007

Is there a quick and easy way, other than scripting a MsgBox(), to show the value of a package variable while the package is running?

View 3 Replies View Related

Help With Joining/selecting Values To Show

Nov 7, 2006

I am editing a pre-existing view.This view is already bringing data from 40+ tables so I am to modify itwithout screwing with anything else that is already in there.I need to (left) join it with a new table that lists deposits and thedates they are due. What I need is to print, for each record in theview, the due date for the next deposit due and the total of allpayments that they will have made by the next due date.So this is how things are. I join the table and it obviously bringsmultiple records for each record (one for each matching one in the newtable). I need, instead, to be able to make out what due date I shouldprint (the first one that is GETDATE()?) and the total of deposits upto that date.Now, payments can be either dollar amounts or percentages of anotheramount in the view. So if it's an amount I add it, if it's a % Icalculate the amount and add it.Example:for group X of clients...Deposit 1 due on oct 1: $20Deposit 2 due on oct 15: $30Deposit 3 due on nov 15: $40Deposit 4 due on nov 30: $50for group Y of clients...Deposit 1 due on Oct 30: $200Deposit 2 due on Nov 30: $300Deposit 3 due on Dec 30: $400So when if I execute the view today (Nov 7th) each client from group Xshould have:Next Due Date: nov 15. Total: $90 (deposit 1 + deposit 2 + deposit 3)Group Y should have:Next Due Date: Nov 30, total: $500 (Deposit 1 + deposit 2)And so on.

View 4 Replies View Related

Report Doesn't Show Up Any Values

Jan 28, 2008

Hi,

I've designed a report and assigned it a datasource that binds with a SP with a parameter. In the XML code of the dataset I can see the input parameter has been recognised by the wizard. Then, I built a report with that Dataset as the source. Everything is fine till this time. Now through my aspx code I pass on the value of the parameter to the report. But the report doesn't show any values at all. The aspx code is like



Code Snippet
Dim reportParameter As New ReportParameter("@UserID", Convert.ToInt32(TextBox1.Text), True)
Dim test() As ReportParameter = {reportParameter}
ReportViewer1.LocalReport.SetParameters(test)

Any ideas what I could be doing wrong?
VS 2005 & SSRS 2005.
TIA.

View 2 Replies View Related

Show All Sales Reps Even If There Are No Values

Dec 3, 2007



I know this is an easy one, but for some reason i keep gettin the wrong results.
This displays something like this :
Question_description Visit_Activity_Id SR_Name
Vacation 5 Judy Smith
Sick 2 Judy Smith
Visit 1 Tom Mathews
Training 3 Karen Williams


But i want it to show all the SR_Name's ..like this:
Question_description Visit_Activity_Id SR_Name
Vacation 5 Judy Smith
Sick 2 Judy Smith
Visit 1 Tom Mathews
Training 3 Karen Williams
NULL null Tom Jones
NULL null Kim Jones
NULL null Jon Travis


Any help will be grately appreciated! thanks!



Code Block
ALTER PROCEDURE [dbo].[PROC_RPT_SR_DAILY_ACTIVITIES]
(@Region_Key int=null, @Daily_activity_statistics_datetime datetime )
AS
BEGIN

SELECT Customer.Name as Store_Name,
Tbl_Daily_Activity_Statistics.SR_Code,
Tbl_Daily_Activity_Statistics.Territory_Code,
Tbl_Daily_Activity_Statistics.Customer_code,
Tbl_Daily_Activity_Statistics.in_progress_time,
Tbl_Daily_Activity_Statistics.completed_time,
Tbl_Daily_Activity_Statistics.Visit_Activity_Id,
Tbl_Daily_Activity_Statistics.dial_in_datetime,
Tbl_Daily_Activity_Statistics.question_code,
tbl_Questions_to_RC_Question.RC_Question_description,
Qry_Sales_Group.SR_Name, dbo.Qry_Sales_Group.Region,
Qry_Sales_Group.Region_Key,
Tbl_Daily_Activity_Statistics.Daily_activity_statistics_datetime

FROM Tbl_Daily_Activity_Statistics
INNER JOIN tbl_Questions_to_RC_Question
ON Tbl_Daily_Activity_Statistics.question_code = tbl_Questions_to_RC_Question.question_code
INNER JOIN Qry_Sales_Group
ON Tbl_Daily_Activity_Statistics.SR_Code = Qry_Sales_Group.SalesPerson_Purchaser_Code COLLATE Latin1_General_CI_AS
LEFT OUTER JOIN customer
ON dbo.Tbl_Daily_Activity_Statistics.Customer_code = dbo.customer.customer_code

WHERE Region_key=@Region_key AND Daily_activity_statistics_datetime = @Daily_activity_statistics_datetime






END

View 3 Replies View Related

Show 0 Values If The Field Is NULL

Apr 22, 2008



Hi All,

I want to show 0, if the field contains NULL values.
I use the following expression.


=IIf(Fields!MTD_TotGrossBKCOAmt.Value = "NULL" , SUM(Fields!MTD_TotGrossBKCOAmt.Value), 0 )


But this works if the field contains only NULL values.
If it has a value, then it shows as #Error

Can anyone tell me how to make this work?

Thanks

View 7 Replies View Related

Show Values For Temperatures Not Equal To Or Above Threshold?

Feb 10, 2014

The below stored procedure is used to create a vertical benchmark line on the X-Axis which has a hour scale. I use the stored procedure to find out which temperature crosses or equals the threshold temperature (340), then plot the vertical benchmark line at the hour the first temperature is equal to or greater than 340 degrees and less than 1000 degrees.

The logic below works if the temperature is equal to or greater than 340 degrees and less than 1000 degrees. THE ISSUE is I have 8 temperatures if they don't cross the threshold of 340 degrees I need to set a default value for my vertical line. In other words if the temperature is 180 and my threshold is 340 then set my vertical line on the highest temperature close to 340.

I tried removing my Where clause (but then it breaks the logic for those temperatures that are equal to or greater than 340). I tried using Case When but this didn't give me what I want either. I tried UNION as well. All giving me results I don't want.

Here is what I am looking for:

This first example is one where there was a temperature that was equal to or greater than the threshold of 340 degrees. This is CORRECT

Code:
first_to_cross_thresholdAgeSampleDateDiffAgeovenStartTimestampAgeovenCompleteTimestamp
2014-02-04 19:24:003.3500002014-02-04 16:02:13.0002014-02-05 05:02:13.000

If 8 temperatures did not equal or cross the threshold then give me the hour of the highest temperature close to the threshold but do not return 0.

For Example:

temp1 92
temp2 108
temp3 0
temp4 284 <<< this is the closest to the threshold so give me the hour when this occurred.
temp5 2192 *Remember I can only count temperatures less than 1000 degrees. Anything above 1000 degrees mean there is nothing in the oven. So it is false/positive.
temp6 102
temp7 0
temp8 12

Code:

first_to_cross_thresholdAgeSampleDateDiffAgeovenStartTimestampAgeovenCompleteTimestamp
2014-02-05 00:30:001.3000002014-02-05 02:00:13.0002014-02-05 02:00:13.000

Code:
CREATE PROCEDURE [dbo].[AgeScoreCardThreshold_JJ_12232013]
-- Add the parameters for the stored procedure here
@LicenseNumber int = NULL,
@Lot varchar(50) = NULL

[code].....

View 3 Replies View Related

Show Number Of Values As % Of Total Records..?

Feb 15, 2007

HiI'm migrating from Access til MySQL.Works fine so far - but one thing is nearly killing me:I got the count of total records in a variabel - (antalRecords)I got the count for the Field Q1 where the value value is = 'nej'Now I just need to calculate how many % of my records have the value 'nej'I access this worked very fine - but with MySQL ( and ASP) I just cant getit right!!! I go crazy ....My code looks like this :strSQL="SELECT COUNT(Q1) AS Q1_nej FROM Tbl_evaluering " &_"WHERE Q1 = 'NEJ' "set RS = connection.Execute(strSQL)antal_nej = RS("Q1_nej")procent_nej = formatNumber((antal_nej),2)/antalrecords * 100Hope ...praying for help ...Please ;-)best wishes -Otto - Copenhagen

View 3 Replies View Related

I Want To Show OpenQuery() Result With Local Table Values

May 12, 2008

Hi, I have two queries as under:QUERY 1:SELECT * FROM OPENQUERY(MYSERVER, 'SELECT * FROM SCOPE() WHERE FREETEXT(''Text to Search'')') AS DocsQUERY 2:SELECT MediaID, LawID, LawDate, Agreement, Name, NameSearch, LawType, LawNo, RegID, IssueNo, AttachmentFrom Dept_LegalLawINNER JOIN Dept_LegalMinistries ON Dept_LegalLaw.RegID = Dept_LegalMinistries.RegIDINNER JOIN Dept_LegalLawType ON Dept_LegalLaw.LawID = Dept_LegalLawType.LawIDWHERE 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1 AND 1=1both queries are working fine separately and I can generate the desired results separately, but I cannot merge them to get one single result for example, after a FREETEXT search I want to get some values from my local table (Query2) to display as one result. Like in Query1 FREETEXT will search the web page based on the given text and in Query2 will select the remaining data from the local database (Title, ID, Name etc etc).Try many thing but no success yet.Need urgent help.Thanks

View 2 Replies View Related

How To Split Comma Separated Values And Show As Rows

Apr 19, 2013

I have an requirement where i need to show Employee Table and CustomerMeta Table joins In CustomerMeta Table (CustID)

Reference to Employee Table and Metavalues table Metavalues table is like master table.

In Application i will get multiple select box selection (DrivingLicense,Passport etc;) so that data will be inserted in comma(',') separated values So in my desired output i need to show as i need to show split those comma separated and for every MetaTypeID MetaTypeName as a row as showed in desired output

Metavalues table :

MetaID Metavaluedescription
1 Driving License
2 Passport
3 AadharCard
4 EducationalProof
5 ResidentialProof

CustomerMeta Table :

CustID MetaTypeID MetaTypeName
2 1,2,3,4,5 DrivingLicense,Passport,AadharCard,EducationalProof,ResidentialProof
3 1,2,3DrivingLicense,Passport,AadharCard

Employee Table

EmpID CustID EmPname
1001 2Mohan
1002 3 ramu

Desired OutPut :

EMPID CustID EmPname MetaTypeID MetaTypeName
1001 2 Mohan 1 Driving License
1001 2 Mohan 2 Passport
1001 2 Mohan 3 AadharCard
1001 2 Mohan 4 EducationalProof
1001 2 Mohan 5 ResidentialProof
1002 3 ramu 1 Driving License
1002 3 ramu 2 Passport
1002 3 ramu 3 AadharCard

View 20 Replies View Related

Show Zero Values For Missing Data In Query Resultset

Jan 7, 2008

Hello,

I have the following query which grabs monthly usage data which is logged to a database table from a web page:


SELECT Button = CASE ButtonClicked

WHEN 1 THEN '1st Button'

WHEN 2 THEN '2nd Button'

WHEN 3 THEN '3rd Button'

WHEN 4 THEN '4th Button'

WHEN 5 THEN '5th Button'

WHEN 6 THEN '6th Button'

WHEN 7 THEN '7th Button'

WHEN 8 THEN '8th Button'

WHEN 9 THEN '9th Button'

ELSE 'TOTAL'

END,

COUNT(*) AS [Times Clicked]

FROM WebPageUsageLog (NOLOCK)

WHERE DateClicked BETWEEN @firstOfMonth AND @lastOfMonth

GROUP BY ButtonClicked WITH ROLLUP

ORDER BY ButtonClicked

The results look like this:

TOTAL 303
1st Button 53
2nd Button 177
3rd Button 10
4th Button 4
6th Button 18
7th Button 19
8th Button 21
9th Button 1

If a button is never clicked in a given month, it never gets logged to the table. In this example, the 5th button was not clicked during the month of December, so it does not appear in the results. I want to modify my query so it displays the name of the button and a zero (in this case "5th Button 0") in the results for any buttons that were not clicked. For some reason I am drawing a blank on how to do this. Thanks in advance.

-Dave

View 3 Replies View Related

Analysis :: Show Only Ultimo Values In Date Dimension?

Aug 28, 2015

I've a table which contains a record for each day an employee is employed:In the cube  I've create a measure which is a sum of the field "Employed"  which provides me the number of employees that are employed for a given date (lowest level of my time dimensions which are YEAR-MONTH-DATE)The problem is that the number aggregating on YEAR and MONTH which provides me with wrong figures at these levels - So how can create a calculated measure (maybe with Scope) that only show the Ultimo Numbers at the lowest level when I am browsing on the Month or Year level. For example if I am on the Year level I only want it to sum on the date 31-12-xxxx and if I'm at the month level(for example July 2012) it should show me the sum of 31-07-2012 which are the last level for the given month.

View 4 Replies View Related

Dropdown - Multi-select Won't Show Values If Only One Item Is Available

Dec 13, 2006

I have a report that has 2 dropdowns, selecting from the first dropdown populates the second one. This works fine in the BI Studio.

When I deploy this report to the 'Report Manager' and make a selection from the first dropdown, the second dropdown loads (as expected). I tried to select from the second dropdown (which has only 1 item - which is correct), the dropdown does not appear correctly - as in, I can't see that item.

Since we can't attach anything here, below is the link to a screenshot of my issue:
http://docs.google.com/View?docid=ddd6j2xn_52c5qd5

If you look closely at the screenshot from the link above, you'll see that there is a value in the second dropdown - it just won't show completely - as if the dropdown is not rendering correctly. I can view source on the page and see that the dropdown has a value.

What appears to be happening is the if only 1 item is in the second dropdown and that item is longer than the size of the dropdown, the dropdown won't render.

Here is my value for the second dropdown '012 Candy Gadler David Thapero'. This is the only value in the second dropdown. - You can try 35 chars or more in the dropdown to confirm.

Notes:
+ No special chars are in either dropdown
+ I am using IE 7 (Also had someone test this on IE 6 - same problem)
+ Using Visual Studio 2005 to build report - where this works fine

Work around:
+ If I add another item to the dropdown via a UNION query, I see the original value + the new item in the dropdown #2


Please share your thoughts
Thanks,
h.


 

View 9 Replies View Related

Show The Rows Containing Same Values Rate As Column In Html Table

Mar 27, 2008

Hi All,

I have following problem
please help me to resolve it.

There is table for shipping
as follows:




City


Kg


Rate(rs)




Rajkot


1


25.00




Rajkot


2


30.00




Rajkot


3


42.50




Ahemedabad


1


42.50




Ahemedabad


2


55.00




Ahemedabad


3


67.50




Ahemedabad


4


80.00




Goa


1


90.00




Goa


2


105.00




Goa


3


120.00




Gondal


1


25.00




Gondal


2


30.00




Gondal


3


42.50




Morbi


1


25.00




Morbi


2


30.00




Morbi


3


42.50




Gandhinagar


1


42.50




Gandhinagar


2


55.00




Gandhinagar


3


67.50




Gandhinagar


4


80.00




 We need to display
the table in html page using any Asp.Net language.

The result table should be:




City(s)


1


2


3


4




Rajkot,Gondal,Morbi


25.00


30.00


42.50


-




Ahemedabad,Gandhinagar


42.50


55.00


67.50


80.00




Goa


90.00


105.00


120.00


-




Baruch


70.25


80.00


92.00


120.50




 Description:

- Display all the cities
together for which all the shipping charges for (1-4) kgs are same. The range
of kgs is not fixed. 

Reply as soon as possible.

Thanks

View 3 Replies View Related

T-SQL (SS2K8) :: How To Show Multiple Values In Column Of Join Query

Nov 6, 2014

in my table i ve the column of item code which contains '1000' ,'2000' ,'3000' series i jus wanna display the output of item codes '1000','2000'series and some of ('3000019','3000020','3000077','3000078').

i tried in my join query

these code left(itemcode,4) in ('1000','2000') or itemcode in ('3000019','3000020','3000077','3000078')

its taking so much of time how t o solve ?

View 1 Replies View Related

SQL 2012 :: Select Multiple Values From Same Column And Make Them To Show In A Row

Jun 10, 2015

I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?

CARE_Nbr||Cust_Nbr||Legal_Name||||||| Address_Tpye |||Addr_Line_1 ||||||||||||||||Addr_Line_2
99000001||004554||Mac Marketing, LLC||Billing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Mailing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Primary Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Physical Address||210 Parktowne Blvd Suite 1||NULL

My script is here, and the sample result is attached. How should I modify this query to get my expected result?

select a.CARE_Number,
a.Customer_Nbr_Txt,
a.Customer_Type_Txt,
a.Legal_Name_Txt,
c.Address_Type_Txt,c.Address_Line_1_Txt,c.Address_Line_2_Txt,
a.Customer_Status_Txt,
a.Legal_Entity_Type_Txt,
a.Business_Unit_Txt
FROM dw_mart.dbo.DimCustomer a

[code]....

View 1 Replies View Related

Multi Value Values In Varchar Field, To Show Each Value Separately In A View

Jul 20, 2005

Hi thereGot a interesting problem (depends on a point of view.....).Background :-Agent (within Domino) is run daily basis which extracts data fromDomino Notes application to SQL Server 2000 database. Agent firstremoves ALL contents and then appends ALL data.Reporting Tool is SQL Reporting Services (very cool !!).Problem :-Within Domino Notes, it can have a field which is mult-value fieldi.e. contain multi valuese.g.(from Helpdesk application)!HowTo!!Access Email;!HowTo!!Access the Web;etc..Need to create a view, then use sql to create stored proc, to be usedas the dataset for report within SQL Reporting services.Format. (using above as data as example)!HowTo!!Access Email; (1 row) WWL/SDR/04023/010 (DocID)!HowTo!!Access the Web; (2 row) WWL/SDR/04023/010 (DocID)I have a unique KEY within table called DocID. The report will have 8separate datasets (i.e. using subreports), all linked back to UniqueKey. That's easy.The dataset causing me hassle is the 1 above. How do u split outvalues as separate rows ?Name of field called --> "ImpFunctionsImpacted".Also, notes expert, who's working on the agent, tell's me the data canbe split either as a comma or semi-colon.Any suggestions most welcome.

View 2 Replies View Related

Show Multiple Values In Single Textbox Comma Separated

Jan 2, 2008



I have a field called "Owners", and it's a child to an "Activities" table.

An Activity can have on or more owners, and what I'd like to do is some how comma separate the values that come back if there are more than one owners.

I've tried a subreport, but because the row is colored and if another field, title, expands to a second row (b/c of the length) and the subreport has just one name, then the sub-report has some different color underneath due to it being smaller in height.

I'm kinda stuck on how to do this.

Thanks!

View 3 Replies View Related

If All Values Of Dropdown Parameter Are Selected - Show ALL In Report Header

Dec 26, 2006

Hi,
I have dropdown parameter with multi-values allowed.
In my report headed I want to show all the dropdown values that were checked by the user to run the report. But since there could be a couple of hundred values I want to show ALL when all the values are selected instead of listing them one by one.
How can I do that?
Thanks,

Igor

View 4 Replies View Related

SQL Server 2008 :: Select Multiple Values From Same Column And Make Them To Show In A Row

Jun 10, 2015

I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?

CARE_Nbr||Cust_Nbr||Legal_Name||||||| Address_Tpye |||Addr_Line_1 ||||||||||||||||Addr_Line_2
99000001||004554||Mac Marketing, LLC||Billing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Mailing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Primary Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Physical Address||210 Parktowne Blvd Suite 1||NULL

How should I modify this query to get my expected result?

select a.CARE_Number,
a.Customer_Nbr_Txt,
a.Customer_Type_Txt,
a.Legal_Name_Txt,
c.Address_Type_Txt,c.Address_Line_1_Txt,c.Address_Line_2_Txt,

[code]....

View 6 Replies View Related

Show/Hide Report Parameters Based On Selected Values In Different Parameter

Mar 14, 2007

Hi All,


I have requirement where first I need to show only one report
parameter. Based on user selection I need to prompt or show the user
another report parameter.


Say suppose I have 3 parameters. User selects first value in first
parameter I should not show the other 2 parameters. If user selects
second value in first parameter I should show second parameter and
hide third parameter. There is no relationship between these 2
parameters except user selection. Similarly if user third value in
first parameter then I should show third parameter and hide second
parameter.


Is this possible? I can not see any Visible property for report
parameters.


If yes, how to achieve this functionality?


Appreciate your help.


Regards,
Raghu

View 1 Replies View Related

Reporting Services :: Show Empty Column Values In SSAS / SSRS?

May 6, 2014

In My cube I have :

A Fact table <<Company Revenue>>
2 Dimension <<Month.Dim>> , <<Company>>

I have 4 company say (A,B,C,D) but i have record for only company A & D that too only for December month .

 When I create a SSRS report out of the cube i want a matrix where all the company names to be displayed in the rows & all the months in the columns and company's revenue in data

What my report is displaying :

Company  |   December
-------------------------------------------------------
A                 |   20000
-------------------------------------------------------
D                 |   3900  
-------------------------------------------------------

what is needed :

Company  |   January  |  February | March |  ........... | December
-----------------------------------------------------------------------------------
A                 |                    |                  |              |     |  20000
----------------------------------------------------------------------------------
B                |                    |                  |              |     |  
----------------------------------------------------------------------------------
C                 |                    |                  |              |     | 
----------------------------------------------------------------------------------
D                 |                    |                  |              |          |   3900  
-----------------------------------------------------------------------------------
 
How do i achieve this either in SSAS or SSAS.

View 5 Replies View Related

How To Show The User Selected Values In Page Header By Using Parameters Which I Have Already Created In The Report

Dec 10, 2007

Hi ,

I am working on Sql server Reporting Services(Sql Server 2005),

i have designed a Report and deployed that report on Report Server, on this report i need to show the user selected values
in page header by using Parameters which i have already created in the Report.

There are 35 to 40 fields in the Front End(Asp.net2.0)

on passing all these values from front end Report is prompting for parameters which is not desired for my case even though i have made ShowParameterPrompts to false.



Thanks in advance

Srinivas Govada

View 1 Replies View Related

Using 2 Different Measures And 2 Different Sets

Jan 31, 2005

Hello.



i have dimensions: month, country, customer, item.
measures: amount, price.

i would like to get such result :

for each customer from USA: sum (amount of item in June * price for the same
item in January).

is it possible?

thank you for your help, Mike.

View 2 Replies View Related

What Security Measures Should I Take?

Nov 29, 2007

what security measures should I take to restrict access on sql server 2005 from LAN and WAN. I am using local Ip address to connect Sql server. Security measure should be so strong that unauthorized user can not access my database.

Any help will be appreciated.

Thanks

View 2 Replies View Related

Report With Measures In Row

Jun 18, 2007

Hi,
I would like to create a report on a cube with Report Server (Query Builder) with one dimension in columns and the "measures" dimension members in rows:

Jan Feb Mar ...
Measure1 10 12 14
Measure2 20 22 24
..

How to create with either Tabular or Matrix report type?

Thanks,
Marcus

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved