Allowing Remote Connections During Setup?
Aug 29, 2006
Is there a way to automatically setup SQL Server Express to allow remote connections during the installation process?
We are deploying SQL Server Express with our application and I really can't ask SMB customers to go through a series of rather complicated steps after our "turn key" setup installs everything in order for any of the other computers in their office to connect.
What's the reasoning behind that, anyway? Why create a database server setup which by default doesn't allow anyone except the server to access it? I guess that makes sense for ASP.NET but the web fad isn't the only platform developers use these days.
Any assistance would be greatly appreciated.
Cheers,
Evan
View 1 Replies
ADVERTISEMENT
Apr 18, 2008
Hi All,
I installed full version of SqlServer 2005. Iam able to Connect to all the systems that are in Intranet. But iam not able to Connect to the external systems (or) remote Connections. I followed all the steps that are in the following URL support.microsoft.com/kb/914277
Still iam getting the problem. Show me a way in this issue.
Thanks&Regards,
SrinivasReddy
View 3 Replies
View Related
Mar 3, 2007
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have recieved this error and i have changed the surface area configuration to allow remote connections but it still won't allow them after i start and restart the server service. is there any way to fix this i have reinstalled several times and that has not yet fixed the problem either.
View 5 Replies
View Related
Mar 3, 2007
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
this is the error message i get and i don't know how to correct it. i have tried going into surface area configuration and setting it allow remote connections but that hasn't changed anything. i am at a loss for how to correct this situation.
View 1 Replies
View Related
Apr 18, 2008
Hi All,
I Installed full version of SqlServer 2005. Iam able to connect to all of our systems which are in intranet. But iam not able to connect to external system. I performed all the steps that are mentioned in the following URL support.microsoft.com/kb/914277 . Even then i was not able to connect to the remote systems. I request you to show me a solution to this issue.
Thanks&Regards,
SrinivasReddy.Tadi
View 1 Replies
View Related
Apr 26, 2015
For some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. i need to get SQL server up and running.
View 2 Replies
View Related
Feb 20, 2007
Just upgraded to SQL Express 2005 from MSDE for Firehouse. Upgrade went great and the db is accessable and running fine. Except when not used for a while. Then I need to restart the db to allow connections of any kind. If I don't I get an error that the db is not accessable and I can't connect. Everything runs fine after until it goes to "sleep" on me again. We upgraded to make use of the 4GB limit as we were at 1.9GB and MSDE was getting a little unhappy.
Any suggestions? Is this a "feature" and if so, is there a script I can run to kick it into working mode again?
Thanks
Chris
View 1 Replies
View Related
Aug 25, 2006
Hello,
My question is about allowing and securing connections to SQL Server 2000 over the internet. The company that I work for has an application server that several of our clients connect to via the internet using secure .NET remoting. Basically, the clients have a desktop application that they run that creates a remoting connection to our server software and we handle the server/database part. Anyway, one of our clients now wants to use Crystal Reports to run ad hoc queries on their data that is hosted on our SQL 2000 database server behind our firewall. Obviously, opening up a port in our firewall and allowing someone to run ad hoc queries on the database makes us all more than a little nervous about security.
Has anyone else here had to deal with this sort of situation before? We'd like to set up a secure, encrypted connection for this one client, but still keep it locked down for everyone else. Is it as simple as enabling encryption and generating SSL certificates for the client machine and our server? I've only been able to find a few resources that help with bits and pieces of the problem, never anything tackling the issue as a whole. If anyone has any thoughts, experiences, links, etc. to share it would be greatly appreciated. We are a small company and no one here has experience with this sort of thing.
Cheers!
Justin
View 4 Replies
View Related
Feb 4, 2008
I cannot go backward or forward on installing SQL Server 2005. Do not have programs installed, but setup disk claims it is already installed.
Tried running Windows installer CleanUp and got the following error message when trying to install
Run Time error -2147024882
System Error &H80004005
Thanks!
Terry
View 1 Replies
View Related
Aug 23, 2006
Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
View 25 Replies
View Related
Oct 11, 2007
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies
View Related
Apr 22, 2008
Hi all,
I am having seriuos problems getting VoIP traffic into and out of my network via the ISA server which we just newly installed.
My network topology is such that the phones i am using for the VoIP service, sitting inside my network and behind the ISA server, have to register to some remote proxy server outside my network and as soon as it registers i can begin using the service. The VoIP service is on the platform of SIP and uses udp ports 5060 and 8080.
I have permitted the necessary ports on the ISA server for the service being UDP port 5060 and 8080 but still cannot get my VoIp traffic through the server.
Please i need some help here as regards something i am supposed to do or something i am not doing right on the ISA server to permit my traffic.
I am a newbie to this Microsoft ISA server and i hope you all understand
Thanks in anticipation to your replies.
Leonard.
View 1 Replies
View Related
Jul 15, 1999
I am new to SQL Server 7 and am not sure how to handle setting up/importing FoxPro databases. The consultants that setup the database before me have combined all of the FoxPro databases into one big database in SQL server. The reasoning was that for user applications to have access to different databases in SQL they would need a connection for each database they are using, so if all the data is put into one database then the user would only have one database connection instead of 6 or 7.
Does this make sense to anyone? Someone else thought that this might have been true is SQL Server 6.5 but not in SQL Server 7.0.
Any help will be appreciated.
Mike
View 1 Replies
View Related
Oct 27, 2007
Does someone have a guide or a link to a guide to allow remote connections from a default install?
Just that I'm currently testing my setup on a work laptop but not having much success but thats probably down to the network admins limiting me far too much on here.
However I am getting a new DELL machine, which I'm gonna make sure the network admins get no where near. Once I have this machine I will be forwarding port 1433 to the machine, but need to know what other changes I need to make to allow my friend access to the machine as well.
So I'd need to know what server settings I need to change and also what my friend needs to do as a client.
thanks in advance!
View 4 Replies
View Related
May 20, 2008
Hi all,
I would like to enable remote connection on SQL Express 2005 using SMO.
How can I do it?
Thanks,
Assaf
View 5 Replies
View Related
Mar 26, 2008
Hello community
I have the following problem = /
http://img101.imageshack.us/my.php?image=asdfzv7.jpg
View 1 Replies
View Related
Jun 2, 2007
While trying to transfer my website project to another computer I am encountering an error when tryng to run the solution. It gives me a "Does not allow remote connections". Why is this when on the original computer everything worked fine.
Walter
View 2 Replies
View Related
Jul 12, 2007
Hi folks,Perhaps every 100 calls to DB i get 1 error message like this:"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" i am using SQL 2000 and am wondering why this happens.I appreciate your help.Leo.
View 3 Replies
View Related
Feb 10, 2008
I am getting the following connection error:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)When I run the page locally on my develepment environment, the page runs fine. I'm using VS2005 and SQL Server Management Studio Express.When I upload the page to the remote server, I get the connection error indicated above.To further troubleshoot the issue, I created a simple test page with the connection string hardcoded in the code-behind and binded to a dropdownlist using the following code:SqlConnection conn = new SqlConnection("Data Source=xxx.xxx.xxx.xx;network=DBMSSOCN;Initial Catalog=TechCenter;Persist Security Info=True;User ID=xxxxx;Password=xxxxxrx;Asynchronous Processing=True;MultipleActiveResultSets=True");
conn.Open(); SqlDataReader dr; SqlCommand command = new SqlCommand("SELECT RecordID, customer_id FROM Customers WHERE recordtype <> 'F' ORDER BY customer_id ASC", conn); dr = command.ExecuteReader(); while (dr.Read()) { DropDownList1.Items.Add(new ListItem(dr["customer_id"].ToString(), dr["RecordID"].ToString())); } dr.Close(); conn.Close();When I run the test page, it works fine, so I know I'm using the correct connection string properties.When I move the connection string to the web.config file and using a dataset with a tableadapter, I get the error about the sql server not allowing remote connections? I'm stumped. I cannot isolate the cause of the error.The remote server is using sql server 2000 and error indicates it is trying to connect to SQL Server 2005??? Any help would be greatly appreciated.Thank you.
View 5 Replies
View Related
Apr 11, 2001
I have a need to connect to a remote (i.e. database on the clients site) SQL Server database from a live application. It is relatively easy under Oracle, but I havent tried to do to an SQL Server. Has anyone done this? The remote SQL Server database in question is 6.5
You can set up odbc connections to remote clients (99% sure on this) so you could go this way. You can also connect directly to a sql box through an IP address in sql7, but I am not too sure how it is with 6.5.
View 1 Replies
View Related
Jul 11, 2006
Hello guys,
I would like to know how to enable remote connections to my SQLExpress installation? Thank you very much for any help!
Regards,
Fabian
my favorit hoster is ASPnix : www.aspnix.com !
View 4 Replies
View Related
Oct 11, 2006
Hello ,
The problem is that we are having Problem while making the remote Connection to the Sql Server 2005
Basically We are having a problem connecting to SQL2005 through a package remotely. when we try to connect to a remote data base, we get the following error
[Connection manager "CRA LRRS Development DB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ".
Although by running the configuration manager on the Remote DataBase System we have enable the Remote Connections through name and IP both but still it cant access it.
Please tell us the possible consequences and provide us the feedback.
I will be really obliged if any of you can provide us the feedback on it as soon as possible.
Thanking You,
Yours Sincerely,
Saima Salim
View 1 Replies
View Related
Apr 16, 2008
Hello,
In SQL Server 2005 configuration tools, is there a way to set SQL Server to remote connections and to set the TCP Port through c# code?
Thanks for your help.
View 1 Replies
View Related
May 9, 2008
I am running a standalone WinXP SP2 system with VS 8 and SS 5 Express on it. I have been working very nicely with VB and SSCE, but I want to learn to use Sql Server 5 Express, which I also have on my system from a prior install of VS 5. I am strictly doing this as a learning experience on my own.
I have been trying to install the NW sample database into SS 5 Ex, but it is obviously not configured properly, because I am getting errors stating that the scripts cannot install because they cannot establish a remote connection to SS. So I looked up the FAQ item here on setting up for remote connections (which I am not even sure applies for a standalone system like mine). Anyway, I followed the instructions in the FAQ, using the SAC util to configure for remote connections, but it does not work. Every time I try to start the DB engine, it fails with the following message:
When trying to start Database Engine when configuiriung for remote connections in SAC:
"TITLE: Surface Area Configuration
------------------------------
The service did not respond to the start or control request in a timely fashion, you need
administrator privileges to be able to start/stop this service. (SQLSAC)
Now, I am the admin user on the PC but OK, so I selected the SAC option to set myself as SSadmin, even though this option is supposedly only for Vista users according to the dialog. Anyway, it does not allow me to set myself as SSAdmin, it returns the following error:
When trying to add myself to SQLSAC, even though it is for Vista:
"TITLE: .Net SqlClient Data Provider
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL
Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open
a connection to SQL Server)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtI
D=2&LinkId=20476"
(which help link is no help BTW, because it is not valid). And the setting does not get set, because the next time I open that dialog, I am back to being a non-admin user.
So what is the solution here? Am I going to be able to use SS 5 Ex on my PC? No matter which connection option I select, either local only, or for any of the remote options, I cannot get it to work. Am I supposed to reboot my PC after changing a setting? Or is it just not possible to run SS 5 Ex on a standalone PC like mine?
Or worse, are there a bunch of other configuration settings I must change as well? I note that, when I look in the SS Config Manager at the properties for SS Express, I see that it shows the logon option that uses the built-in account "Network Service"rather than Local System or Local Service; is that correct? BTW the browser is always running in all this.
As you may gather, I know zip nada about SS, but I am an experienced VB/VBA/VC+/FP programmer of many years, did desktop Access databases w/VB6 frontends for a lot of customers, so I am familiar with DB design etc. I just know next to nothing about backend stuff like this, other than a little with BTrieve years ago.
Any help appreciated
Pete B
.
View 1 Replies
View Related
Apr 7, 2008
I am having trouble with Report Manager. It seems that every day or every other day we get this message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No such host is known.) An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections."
To fix this we open the Surface Area Configuration for the server that hosts the Reporting Database and stop and restart the database engine then open up the Surface Area Configuration for the server that hosts the Report Manger database and stop and restart that database engine along with the Reporting Services Browser.
This actually may not be the exact order that we do the stop/starts because we have tried so many different combinations (ie. stop one then start another then restart that one, etc.). Anyway, we usually keep on stoping and restarting until we can get back into Report Manager without getting the error message from above.
Does anyone have any insight as to what this could be??
View 4 Replies
View Related
Dec 18, 2007
Hi all
This question has probably been asked a few times on the forum but none of the answers work for my situation.
I recently installed SQL Server 2005.
When trying to connect to my server, locally, using Management studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53).
I have already enabled remote connections in the Surface Area Configuration, using TCP/IP and pipes.
I created exceptions in the Firewall and started the Server Browser service.
Please help
Thanks
View 5 Replies
View Related
Sep 21, 2006
I downloaded VS studio express, and created a personal website using the wizard to test drive the thing. When I hit ctr + f5 to run the sample provided, then I get this message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) "
I tried disabling the firewall (Norton's firewall because Windows is disable always). Any suggestions? This is a brand-new machine, running XP sp2, just downloaded the VS studio express.
I really appreciate your inputs.
Regards,
Carlos
info@paesano.com
View 4 Replies
View Related
Dec 5, 2006
Hi,
I'm without a clue when it comes to SQL and how to secure it!
I've set up a SQLExpress running on a dedicated server on the web and I'm using TCP/IP remote connection to connect to the DB from a the web server running the ASP .
Would it be better using named pipes?
Also is there some way I can additionally authenticate a connection based on IP numbers?
I would really appreciate some advice thanks.
View 1 Replies
View Related
Dec 8, 2006
Hi,
Attempting to open a new database engine from a Windows 2003
R2 server (x64) which is
running SQL Server 2005 to my desktop PC (XP Pro) which is running SQL 2005 developer
edition.
I€™ve opened up TCP/IP and named pipes and enabled all protocols
within surface area configuration and server
configuration manager but get this€¦
An error has occurred while establishing a connection to the
server. When connecting to SQL Server
2005, this failure may be caused by the fact that under the default settings
SQL Server does not allow remote connections. (provider: TCP Provider, error: 0
- A connection attempt failed because the connected party did not properly
respond after a period of time, or established connection failed because
connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
Is this a red-herring type message? I ask because the text
states €œthis failure may be caused€? and as far as I can see I€™ve open up my
PC to all connections.
Thanks in advance
Dave
View 10 Replies
View Related
Jul 2, 2007
hi,
sql server 2005 express is installed on comp1. my client application is installed on comp2 and comp3. all comps have win xp. when i run my application, it can't connect to sql server express. i got the following message:
an error has occured while establishing a connection to the server. when connecting to sql server 2005, the failure may be caused by the fact that under the default settings sql server does not allow remote connections. (provider: sql network interfaces, error 26 - error locating server/instance specified)
so, how can i solve this problem, to connect to the server?
View 4 Replies
View Related
Jan 25, 2007
when i try to add a new data connection from within Visual basic or C#, i get a 'provider: SQL Network Interfaces, error number 26 - error locating server/instance specified.
i have tried to allow remote connections through the sql configuration manager and the surface area configuration.
View 3 Replies
View Related
Dec 18, 2007
I've got the following error from running my aspx webpages, trying to communicate to the MSSQL 2005 database.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)
I've see and read a lot of chatter on the forum on the topic, but didn't find my solution. I have done a number of things, all of which didn't shake the error.
1) I went into SQL Server Surface Area Configuration for Services and Connections, and set Remote Connections to Local and Remote Connections, using TCP/IP only
2) Disabled Firewall
3) Made exceptions throught the Firewall for SQL Server and SQL Browser
Any other suggestions, thanks in advance.
View 4 Replies
View Related
Oct 18, 2007
Hi,
Is there any way to ony allow remote access to an instance of SQL Server 2005 from a specific set of ip adresses? (and How To..)
My problem is i only want certain machines to access the server. Any other suggestions to achive this are most welcome.
Thanks for your time
Leroy
View 4 Replies
View Related
