I can't seem to get the syntax correct for ALTERing an existing column with a default constraint. I've been to Help and BOL. There are examples that show how to use the ALTER command to add a column with a default constraint but not how to do it on an existing column.
Any help would be appreciated.
Sidney Ives
I need to alter the datatype of a column from smallint to decimal (14,2) but the column was originally created with the following:
alter my_table
add col_1 smallintNot Null
constraint df_my_table__col_1 default 0
go
I want to keep the default constraint, but i get errors when I try to do the following to alter the datatype:
alter table my_table
alter column col_1 decimal(14,2)Not Null
go
Do I need to drop the constraint before I alter the column and then rebuild the constraint? An example would be helpful.
Thx
I have a default constratint on DateColumn getdate()-1
I have used enterprise manager to update it to yesterday's date everyday.
I would like to have a SQL which can check for the date in the system
or even a trigger which checks when the date changes the constraint is updated itself. If this is not possible I would like to have a stored procedure which I will schedule to run as a job everyday once.
So if today 6/12/2006, the default value in the Datecolumn should be
6/11/2006.
This gives me a error, i tried but could not fix the bug.
Alter Table TABLE_NAME
Alter Constraint DF_DATECOLUMN
Default getdate()-1
Ashley Rhodes
I've done some research on setting the default value of a column and found the following code:
ALTER TABLE [table1] ALTER COLUMN [column1] SET DEFAULT 0
I am trying to set column1 within table1 to a default value of 0, column1 is an int data type. But it doesn't work within MS SQL SERVER 2000.
Can anyone tell me what's wrong?
I know that the correct syntax to set the default on a column in SQL Server 2005 is:
Alter Table <TableName> Add Constraint <ConstraintName> Default <DefaultValue> For <ColumnName>
But from what I can gather, the SQL-92 syntax is:
Alter Table <TableName> Alter Column <ColumnName> Set Default <DefaultValue>
This generates an error on SQL Server 2005.
Am I wrong about the standard syntax for this statement? If this is the standard, why doesn't SQL Server 2005 support it? I am trying to avoid code that will only work on certain database managers.
Thanks.
I have a integer column which has Default value alredy defined. How do i alter this column so that it's defult value will be removed. I want to do this using T-SQL statement. Not through design mode.
How to set a default value to columns in table ..without dropping it.??
View 3 Replies View Related
I have a integer column which has Default value alredy defined. How do i alter this column so that it's defult value will be removed. I want to do this using T-SQL statement. Not through design mode.
I'd like to alter a table and add a column:
add_date datetime
Is there a way, in the ALTER statement, to have the value default to the current date -- GETDATE() -- anytime a row is inserted w/out an explicit value for the column.
Thx
I cannot figure out how to add a default constraint to an existing column. The syntax I'm using is :
ALTER TABLE table_name WITH NOCHECK
ADD CONSTRAINT column_name DEFAULT (0)
This gives me a syntax error.
The column was originally added with a default constraint of 1 to a 2.6 million row table.
I dropped the existing constraint and need to add the new default constraint of 0 for that column.
Anyone have any ideas? Thanks in advance.
 I have a table named [New Item] and created a default constraint on a column, and i wanted to change the data type of the column using the query
alter table [new item]
alter column pcs_qty decimal(15,2) not null
but the name of the default constraint is 'DF__New Item__Pcs_Qt__2D12A970' and i am not able to delete the constraint because it contains a space in between.Is there any work around for this.
I tried to delete the constraint by using the query
alter table [new item]
drop constraint 'DF__New Item__Pcs_Qt__2D12A970'
but I am getting the exception,
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near 'DF__New Item__Pcs_Qt__2D12A970'.
I have a table with ~30M records. I'm trying to add a column to the existing table with default value and have noticed following ... When using alter with default value- (Executes more than 45 min and killed forcefully)
ex: Â
ALTER TABLE dbo.Table_X Add is_Active BIT CONSTRAINT DF_Table_X_is_Active DEFAULT 'FALSE' NOT NULL
GO
When using update command after adding column with alter (without default value) it completes is 5 min.
ex: Â
ALTER TABLE dbo.Table_X Add is_Active BIT NULL
GO
UPDATE Table_X SET is_Active = 0 WHERE is_Active IS NULL
GO
Why there is so much of difference in execution times ? I was just trying to understand internal behavior of the SQL in these two scenarios.Â
Well here's one of those excruciatingly simple obstacles:
In SQL Server 2005 (Mgmt Studio): according to BOL, the syntax to set a default value for an existing column is:
ALTER TABLE MyCustomers ALTER COLUMN CompanyName SET DEFAULT 'A. Datum Corporation'
However, when I Check:
alter table CommissionPayment alter column Amount Set Default 0
I get the error message:
"Incorrect syntax near the keyword 'Set'."
No other combinations of this syntax work.
Help! What am I missing?
IF NOT EXISTS (SELECT TOP 1 1 FROM dbo.syscolumns WHERE id = OBJECT_ID(N'dbo.Employee) and name = 'DoNotCall')
BEGIN
ALTER TABLE [dbo].[Employee] ADD [DoNotCall] bit not null Constraint DoNot_Call_Default DEFAULT 0
IF ( @@ERROR <> 0 )
GOTO QuitWithRollback
END
It just takes a LOT of time in SQL Server Management studio. I have to cancel the query and cancelling takes a whole lot time. I am using SQL Server 2008.
Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
Hi people,I?m trying to alter a integer field to a decimal(12,4) field in MSACCESS 2K.Example:table : item_nota_fiscal_forn_setor_publicofield : qtd_mercadoria integer NOT NULLALTER TABLE item_nota_fiscal_forn_setor_publicoALTER COLUMN qtd_mercadoria decimal(12,4) NOT NULLBut, It doesn't work. A sintax error rises.I need to change that field in a Visual Basic aplication, dinamically.How can I do it? How can I create a decimal(12,4) field via script in MSACCESS?Thanks,Euler Almeida--Message posted via http://www.sqlmonster.com
View 1 Replies View RelatedI have a stored procedure that adds constraints from a variable:
ALTER procedure [dbo].[addMyConst](@txtAuto_ourlim money OUTPUT,@txtGen_ourlim money OUTPUT)ASEXECUTE('ALTER TABLE [dbo].[tbl1] ADD CONSTRAINT DF_auto_ourlim DEFAULT ' + @txtAuto_ourlim + ' FOR Auto_ourlim')EXECUTE('ALTER TABLE [dbo].[tbl1] ADD CONSTRAINT DF_Gen_ourlim DEFAULT ' + @txtGen_ourlim + ' FOR Gen_ourlim')
This works fine unless one of the variables is null or empty. Then I get the error: "Incorrect syntax near the keyword 'FOR'
Evidendly SQL Server Express sees "....DEFAULT + + FOR..." but I don't know.
I've fiddled with this a long time and haven't a clue how to fix it. Any help would be appreciated. Thanks, Steve
There is a table exists in a database name tbDatabaseProviders.
I want to alter this table to add a column DatabaseProvider Also I want to add a default constraint so if nothing than 1 should be added. Â
Remember, the table already exists so when I write the script query then I want to first check the constraint if it exists then I dont want to add the constrait otherwise I will add it. Â
I was having problem to first add a constraint with the constraint name so I could find the constraint before finding it if it already exists.Â
What should I do the above.Â
I need to run the alter table to drop a default. However, the default name is kind of 'dynamic' from around 1000 databases, thus I need to run the following sql to get the name to a variable. Now, it looks the alter table statement does not like to drop a vaiable, is there a solution about it?
declare @radius_default varchar(40)
select @radius_default = (select sobj.name from sysobjects sobj
inner join syscolumns scolumn
on sobj.ID = scolumn.cdefault
where scolumn.name = 'radius' and sobj.name like '%LandMarks%')
print 'Need To Drop @radius_default: ' + @radius_default
--====================================
alter table LandMarks drop constraint @radius_default
thanks
David
Pls help me
i want to alter table and add identinty constraint on one column
create table play8(id int)
" alter table play8
alter column id int identity(1,1) " GIVES ERROR or it is posibble
Yaman
Hi.I'm getting errors like this when I try to run an upgrade script I'm trying towrite/test:altering labels to length 60Server: Msg 5074, Level 16, State 4, Line 5The object 'ALTPART_ANNOT_ANNOTID_FK' is dependent on column 'label'.I used this to bracket my script:sp_msforeachtable "ALTER TABLE ? NOCHECK CONSTRAINT all"gosp_msforeachtable "ALTER TABLE ? DISABLE TRIGGER all"go/* updates here */sp_msforeachtable @command1="print '?'",@command2="ALTER TABLE ? CHECK CONSTRAINT all"gosp_msforeachtable @command1="print '?'",@command2="ALTER TABLE ? ENABLE TRIGGER all"goI guess the alter table nocheck constraint isn't disabling the fk'scompletely?Is there a way around this, or do I manually have to do the constraintdropping/recreating?ThanksJeff Kish
View 3 Replies View RelatedHi,I see the following in Books Online: CONSTRAINT--Is an optional keywordindicating the beginning of a PRIMARY KEY, NOT NULL, UNIQUE, FOREIGNKEY, or CHECK constraint definition...But I have a table column defined as follows:[MONTH] [decimal] (2, 0) NOT NULL CONSTRAINT[DF__TBLNAME__MONTH__216361A7] DEFAULT (0)My question: Is "DEFAULT" a constraint, or is it called something else?Thanks,Eric
View 2 Replies View Related/* for the google index */ALTER TABLEDEFAULT COLUMNDEFAULT VALUEI've worked out several stored procedures for altering the default columnvalues in a table. They were compiled from books and code snippets foundhere. It was a pain to work out so I've decided to share my work andresearch here. This post is just my way of saying thanks to several othershere for posting with their wisdom and intelligence.MichaelsimpsonAT(dot)cts(dot)comThis procedure gets the constraint name. If you use the design view tosetup a default value, you won't know the system assigned constraint name.This proc makes it an non issue. This code was gleened from this newsgroup.CREATE PROCEDURE [DBO].[GetConstraintName](@tablename sysname,@columnName sysname,@constraintName sysname OUTPUT)asSELECT@constraintName = o1.nameFROMsysobjects o1INNER JOINsyscolumns c ON o1.id = c.cdefaultINNER JOINsysobjects o2 ON o1.parent_obj = o2.idWHERE (o2.name = @tablename) AND (c.name = @columnName)This procedure changes the default value for a column that is a numeric. Ituses the previously define stored procedure to get the constraint name. Atext version of this procedure can be created by removing the cast, definingthe input parameter "newConstraint" as varchar(255).CREATE PROCEDURE [dbo].[ChangeIntConstraint](@tableName sysname,@columnName sysname,@newConstraint int)ASDeclare @conName sysnameexec GetConstraintName @tableName, @columnName, @constraintName = @conNameOUTdeclare @sql nvarchar(1024)set @sql = 'ALTER TABLE ' + @tableName + ' drop constraint ' + @conNameexec(@sql)set @sql = 'ALTER TABLE ' + @tableName + ' ADD CONSTRAINT ' + @conName + 'DEFAULT (' + CAST(@newConstraint AS varchar(255)) + ') FOR ' + @columnNameexec(@sql)
View 3 Replies View RelatedHi,
I need list out the defaulat and constraint value in SQL2K. Where I get those values.
Thanks,
Ravi
A few weeks ago a client asked me to add a column to a table so Icreated this script:ALTER TABLE dbo.tblIndividual ADD fldRenewalStatus BIT NOT NULLCONSTRAINT fldRenewalStatus_Default DEFAULT 0Now they want to change it from a BIT to an INT, to store an enum.Fair enough. However, no matter how much I wrangle with a script, Ican't find a reliable way to alter the column. I've mixed and matchedthe following and nothing seems to work:EXEC sp_unbindefault 'tblIndividual.fldRenewalStatus'DROP DEFAULT DF_tblIndividual_fldRenewalStatusALTER TABLE tblIndividualDROP CONSTRAINT fldRenewalStatus_DefaultALTER TABLE tblIndividualDROP COLUMN fldRenewalStatusGOALTER TABLE tblIndividualADD fldRenewalStatus int NOT NULLCONSTRAINT fldRenewalStatus_Default DEFAULT 0Thoughts?ThanksEdward
View 4 Replies View RelatedHello,
I have a table set up called tbl_DailySummary_new. In that table I have a column called €˜RevType€™ char(2) NOT NULL Default €˜00€™. I'm trying to populate this table from another table called tbl_DailySummary. The RevType column in tbl_DailySummary allows null values (and has them). When I attempt to insert all records from tbl_dailysummary into tbl_DailySummary_new, I get the following error message:
Msg 515, Level 16, State 2, Line 1
Cannot insert the value NULL into column 'RevType', table 'TxnRptg.dbo.tbl_DailySummary_new'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Why dosen€™t the default constraint on the RevType column in the new table pick this up?
Thank you for your help!
cdun2
Hi ,
I want to define default constraint for a column to force it to UPPER.
USE [GLP]
GO
ALTER TABLE [dbo].[col1] ADD CONSTRAINT [DF_col1_TypeCode] DEFAULT (N'UPPER(col1)') FOR [col1]. Its defined..
But when I tried ti insert into records..It not convertedto uppecase at all...Isn't it possible this way ?
Thanks,
-V
Troops,
I'm a software developer trying to hack my way thru a SQL script to increase the size of a column. The column has a constraint on it that won't allow the alter unless its dropped.
Alter command:
ALTER TABLE dbo.QueueBack ALTER Column QBQueue varchar(4) NOT NULL
Message response:
Msg 5074, Level 16, State 1, Line 10
The object 'DF__QueueBack__QBQue__76818E95' is dependent on column 'QBQueue'.
Msg 4922, Level 16, State 9, Line 10
ALTER TABLE ALTER COLUMN QBQueue failed because one or more objects access this column.
So, my script drops the default constraint, alters the column size and then adds the constraint back. The problem is that the constraint does NOT appear to be the same as it was prior. I can run the Alter command on the column and it will allow me to change the size of the column... where it prohibited me from doing such before. How do I restore the default constraint so it is exactly the way it was before I dropped it?
Thx,
Stretch
---------------------------------
Script for drop, alter, add... modified slightly for simplicity...
declare @Error int
BEGIN TRAN
SELECT @Error = 0
DECLARE @defname VARCHAR(100), @cmd VARCHAR(1000)
-- this is retrieved at run time from the sysconstraints table; hard-coded here...
set @defname = 'DF__QueueBack__QBCategory'
IF @defname <> ''
BEGIN
SET @cmd = 'ALTER TABLE dbo.QueueBack DROP CONSTRAINT '+ @defname
EXEC(@cmd)
if @@ERROR = -1
BEGIN
SET @Error = -1
END
END
if @Error = 0
BEGIN
-- modify the column
ALTER TABLE dbo.QueueBack ALTER Column QBCategory varchar(7) NOT NULL
if @@ERROR = -1
BEGIN
SET @Error = -1
END
END
if @Error = 0
BEGIN
-- Add the default constraint back
SET @cmd = 'ALTER TABLE dbo.QueueBack ADD CONSTRAINT '+ @defname + ' DEFAULT ('''') FOR QBCategory'
EXEC(@cmd)
if @@ERROR = -1
BEGIN
SET @Error = -1
END
END
if @Error = 0
BEGIN
-- Commit if no error...
COMMIT TRAN
END
ELSE
BEGIN
-- Rollback if error...
ROLLBACK TRAN
END
GO
I would like to add an Identity to an existing column in a table using astored procedure then add records to the table and then remove the identityafter the records have been added or something similar.here is a rough idea of what the stored procedure should do. (I do not knowthe syntax to accomplish this can anyone help or explain this?Thanks much,CBLCREATE proc dbo.pts_ImportJobsas/* add identity to [BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] IDENTITY(1, 1) NOT NULL/* add records from text file here *//* remove identity from BarCode Part#] */alter table dbo.ItemTestalter column [BarCode Part#] [int] NOT NULLreturnGOSET QUOTED_IDENTIFIER OFFGOSET ANSI_NULLS ONGOhere is the original tableCREATE TABLE [ItemTest] ([BarCode Part#] [int] NOT NULL ,[File Number] [nvarchar] (20) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_File Number] DEFAULT (''),[Item Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Item Number] DEFAULT (''),[Description] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Description] DEFAULT (''),[Room Number] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Room Number] DEFAULT (''),[Quantity] [int] NULL CONSTRAINT [DF_ItemTest_Quantity] DEFAULT (0),[Label Printed Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Label Printed Cnt]DEFAULT (0),[Rework] [bit] NULL CONSTRAINT [DF_ItemTest_Rework] DEFAULT (0),[Rework Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Rework Cnt] DEFAULT (0),[Assembly Scan Cnt] [int] NULL CONSTRAINT [DF_ItemTest_Assembly Scan Cnt]DEFAULT (0),[BarCode Crate#] [int] NULL CONSTRAINT [DF_ItemTest_BarCode Crate#] DEFAULT(0),[Assembly Group#] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Group#] DEFAULT (''),[Assembly Name] [nvarchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULLCONSTRAINT [DF_ItemTest_Assembly Name] DEFAULT (''),[Import Date] [datetime] NULL CONSTRAINT [DF_ItemTest_Import Date] DEFAULT(getdate()),CONSTRAINT [IX_ItemTest] UNIQUE NONCLUSTERED([BarCode Part#]) ON [PRIMARY]) ON [PRIMARY]GO
View 2 Replies View RelatedI am using sql server ce.I am changing my tables sometimes.how to use 'alter table alter column...'.for example:I have table 'customers', I delete column 'name' and add column 'age'.Now I drop Table 'customers' and create again.but I read something about 'alter table alter column...'.I use thi command but not work.I thing syntax not true,that I use..plaese help me?
my code:
Alter table customers alter column age
how can you alter a table so that you can add a default value whenever the field is NULL? for example, whenever the table is brought up in a query, NULL is replaced with UNKNOWN
View 1 Replies View RelatedHello,I have an SQL Server 2005 database that I'm trying to create using script.Everything works fine, but when I click on "Database Diagrams" I get anerror message that there is no database owner, and of course when I show theDatabase Properties, the database was created without one. Is there any wayto ALTER AUTHORIZATION to a default owner or system administrator, somethingvalid?Any direction would be appreciated.Thanks!Rick
View 1 Replies View Related
Hi
I want to delete the Default value for a specific column which is set to Null
I've used
ALTER TABLE SYSTEMS_PATIENT_LOG ALTER COLUMN SYSTEMS_LOGID DROP DEFAULT
It is giving error
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'DEFAULT'.
plz could any one tell me where I could be wrong