Greetings,
Is there a way to force the parameter input area to always show even when default values are specified? I want to always display the parameter area even when I set initial parameters.
Thanks
Does anyone know a way to force RS to not collapse the parameter area on a drill through? I searched this forum and found some related threads but nothing that covered this.
I have several reports where they drill through to each other and in all cases, while they pass the parameters between, the users usually want to go directly to different products or time periods within the reports. They constantly have to expand the input area every time they go to another report. This confuses a lot of them.
Is there a setting somewhere that controls this?
Thanks, Tim
For the life of me I can't figure this one out. I'm trying to call a web service using the SSIS "Web Service Task". I give the Connection Manager a valid URL, download the WSDL, and go to the input pane of the "Web Service Task" options. No problems. I select my web service and pick a web method from the methods drop-down box. No problems. But where it should pop up with an input dialog box that allows you set your inputs for the web service call, nothing shows up. No errors are reported; the input pane just remains completely blank. I can inspect the WSDL with other tools (like Altova's XMLSpy) and plainly see the inputs it takes. I haven't seen a similar issue posted on this forum so I don't know if I'm going nuts or my version of SSIS is evil or what. I applied SQL Server SP1 and SP2 but it didn't change anything. I then tried to connect to one of Amazon's public web services to see if it was a problem related to our in-house WSDL formatting, and I discovered the same problem. Take for instance
http://webservices.amazon.com/AWSECommerceService/AWSECommerceService.wsdl?
I create a Web Service Task for this service and when I go to select the "ListLookup" method from the drop-down box on the input page no input parameters appear. The WSDL clearly defines this method to take a bunch of inputs. If anybody has any ideas about what's going on here I would greatly appreciate the help. Thanks.
Hi,
View 16 Replies View Related
Is there a way to set the default so that the parameter area is displayed by default when running a report in Report Manager. Currently you have to go up and hit the arrows to open the parameter area. I'd like it to be open by default.
Thanks.
We have some reports that allow null values for parameters and I find the "Null" label next the parameters in the report viewer to be completly the wrong thing i want to show to business users.
Has anyone worked out a way to change this label to something more meaningful?
aaron
Is there a way to change the background color of the parameter prompt area on the web report viewer control?
Thanks!
BobP
I have a stored procedure which takes an input parm and is supposed to return an output parameter named NewRetVal. I have tested the proc from Query Analyzer and it works fine, however when I run the ASP code and do a quickwatch I see that the parm is being switched to an input parm instead of the output parm I have it defined as...any ideas why this is happening? The update portion works fine, it is the Delete proc that I am having the problems... ASP Code...<asp:SqlDataSource ID="SqlDS_Form" runat="server" ConnectionString="<%$ ConnectionStrings:PTNConnectionString %>" SelectCommand="PTN_sp_getFormDD" SelectCommandType="StoredProcedure" OldValuesParameterFormatString="original_{0}" UpdateCommand="PTN_sp_Form_Update" UpdateCommandType="StoredProcedure" OnUpdated="SqlDS_Form_Updated" OnUpdating="SqlDS_Form_Updating" DeleteCommand="PTN_sp_Form_Del" DeleteCommandType="StoredProcedure" OnDeleting="SqlDS_Form_Updating" OnDeleted="SqlDS_Form_Deleted"><UpdateParameters><asp:ControlParameter ControlID="GridView1" Name="DescID" PropertyName="SelectedValue" Type="Int32" /><asp:ControlParameter ControlID="GridView1" Name="FormNum" PropertyName="SelectedValue" Type="String" /><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" size="25" Name="RetVal" Type="String" /></UpdateParameters><DeleteParameters><asp:Parameter Name="original_FormNum" Type="String" /><asp:Parameter Direction="InputOutput" Size="1" Name="NewRetVal" Type="Int16" /></DeleteParameters></asp:SqlDataSource>Code Behind:protected void SqlDS_Form_Deleted(object sender, SqlDataSourceStatusEventArgs e){ if (e.Exception == null) { string strRetVal = (String)e.Command.Parameters["@NewRetVal"].Value.ToString(); ............................Stored Procedure:CREATE PROCEDURE [dbo].[PTN_sp_Form_Del] (
@original_FormNum nvarchar(20),
@NewRetVal INT OUTPUT )
AS
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED
DECLARE @stoptrans varchar(5), @AvailFound int, @AssignedFound int
Set @stoptrans = 'NO'
/* ---------------------- Search PART #1 ----------------------------------------------------- */
SET @AvailFound = ( SELECT COUNT(*) FROM dbo.AvailableNumber WHERE dbo.AvailableNumber.FormNum = @original_FormNum )
SET @AssignedFound = ( SELECT COUNT(*) FROM dbo.AssignedNumber WHERE dbo.AssignedNumber.FormNum=@original_FormNum )
IF @AvailFound > 0 OR @AssignedFound > 0 /* It is ok if no rows found on available table, continue on to Assigned table, otherwise stop the deletion.*/
-----This means the delete can't happen...........
BEGIN
IF @AssignedFound > 0 AND @AvailFound = 0
BEGIN
SET @NewRetVal = 1
END
IF @AssignedFound > 0 AND @AvailFound > 0
BEGIN
SET @NewRetVal = 2
END
IF @AssignedFound = 0 AND @AvailFound > 0
BEGIN
SET @NewRetVal = 3
END
END
ELSE
BEGIN
DELETE FROM dbo.Form
WHERE dbo.Form.FormNum=@original_FormNum
SET @NewRetVal = 0
---Successful deletion
END
GO
-------------------------------------------------------- When I go into the debug mode and do a quickwatch, the NewRetVal is showing as string input.
I have a report that in most cases takes 4 parameters. In a few special cases, though, it takes 5 parameters. I have my code modified enough such that it can handle this exception, however I cannot figure out how to conditionally show the 5th parameter based on the 4th parameter. Is this possible?
View 3 Replies View RelatedI am trying to get 3 report parameters working to show 3 different tables.
table 1 = Area 1 data
table 2 = Regional Area 1
table 3 = Stores in Regional Area 1
Currently I am working on the biggest one. E.g. if all 3 parameters have information in them, then you use table 3. I have written out the coding as the following
=iif(isnothing(Parameters!Area.Value),True, False ) and
iif(isnothing(Parameters!Regional.Value),True, False ) and
iif(isnothing(Parameters!store.Value),True,False)
But it errors stating end of statement expected. What I have missed or not done here?
Hi, I need to do the following task, which is described by pseudo-code
SELECT * FROM Customers
SORT BY @SortExpression
How can I do something like it (sorting according to input parameter)
Thanks for any idea
Hi,
I am trying to make a simple stored procedure which I want to take input on every run from end user:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
declare @sku varchar(20)
insert into skua (sku,SumOfQtyNum)
(select sku,sumofqtynum from sku where @sku = sku.sku)
it is working but not asking parameter values
(I want to use passthrough query after that in Access)
thanks
AA
Hi everyone,
I have a question that I believe should be simple to answer yet I cannot find the answer anywhere. I am trying to make it possible for my report to clear the input box whenever the report is run or when anything in a dropdown list is selected. The reason why I want this is because my report has a dropdown list that inputs date ranges for "quick" report info. The other option is to manually type in the begin and end date. If anyone could help me out with this I would be very grateful.
Thanks,
Roy
Hi
Help with syntax, I get the error in the line: myDA.Fill(ds, "t1")
Function GetProductsOnDepartmentPromotionPaging(ByVal departmentId As String)
Dim myConnection As New _
SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim myDA As New SqlClient.SqlDataAdapter _
("MM_SP_GetProductsOnDepartmentPromotion", myConnection)
' Add an input parameter and supply a value for it
myDA.SelectCommand.Parameters.Add("@DepartmentID", SqlDbType.Int, 4)
myDA.SelectCommand.Parameters("@DepartmentID").Value = departmentId
Dim ds As New DataSet
Dim pageds As New PagedDataSource
myDA.Fill(ds, "t1")
pageds.DataSource = ds.Tables("t1").DefaultView
pageds.AllowPaging = True
pageds.PageSize = 4
Dim curpage As Integer
If Not IsNothing(Request.QueryString("Page")) Then
curpage = Convert.ToInt32(Request.QueryString("Page"))
Else
curpage = 1
End If
pageds.CurrentPageIndex = curpage - 1
lblCurrpage.Text = "Page: " + curpage.ToString()
If Not pageds.IsFirstPage Then
lnkPrev.NavigateUrl = Request.CurrentExecutionFilePath + _
"?Page=" + CStr(curpage - 1)
End If
If Not pageds.IsLastPage Then
lnkNext.NavigateUrl = Request.CurrentExecutionFilePath + _
"?Page=" + CStr(curpage + 1)
End If
list.DataSource = pageds
list.DataBind()
End Function
Best Regards
Primillo
I have a stored proc that inserts a customer and it expects a timestamp input parameter. I dont know what a timestamp datatype is for sql 2005 and Ive tried to parse all sorts of data types but the proc errors out saying it needs "Byte[]" which Ive tried. Can anyone help me with this? ThanksRyan
View 2 Replies View Relatedhi all
i am using VS 2005 with SQL Server 2005 and i faced a problem that need to be solved urgently...
i want to make a function that take a table as input parameter which is the output of a stored procedure (Record set)...
first i found that to make w table be as input parameter you must create type of that table first but i found that sql server 2005 doesn't have the 'table' as a type...
please any help will be appreciated
thanks in advance
i created a cookie as follows
HttpCookie myCookie = new HttpCookie("Portal");
myCookie["EMail_ID"] = Email_ID;myCookie["Role"] = Role_ID.Value.ToString();myCookie.Expires = DateTime.Now.AddMinutes(1);
Response.Cookies.Add(myCookie);
Now i have to take the"EMail_ID" as input parameter in sqldatasourse.
<asp:SqlDataSource ID="SqlDS_DC_List" runat="server" ConnectionString="<%$ ConnectionStrings:EnR_Portal_ConnectionString %>"
SelectCommand="proc_DC_List" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:CookieParameter CookieName=" " Name="Email_ID" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
how can i specify Email ID as cookie name?
Hi,
I am using a ListBox where a user can choose multiple lines.
The index of the selected items are then used in a stored procedure.
I wan´t to use the ID´s in this statement:
SELECT * FROM MyTable WHERE MyID IN (1,2,4,9)
But how can I do this?
If I pass them as a string, then I can´t use them as above.
Can I separate the string '1,2,4,9' so I can use them in the statement above?
Or can I send the values as a array to the stored procedure?
Regards!
Jonas
This should be relatively easy but for some reason it isn't. I'm trying to simply add parameters to a stored procedure that performs a simple input and I can't do it... I keep getting an error that the parameters are not found when I am explicitly stating them. I could do this with VB ASP.NET 1.x but with all these radical changes with 2.0, I'm pulling my hair out.... I can get to work if I declare a sqlStatement in the code but don't want to go that route (but will if there is no other choice) Any help would be great:
Code:
Dim cmd As New SqlDataSource
cmd.InsertCommandType = SqlDataSourceCommandType.StoredProcedure
cmd.InsertParameters.Add("@firstName", txtFirstName.Text)
cmd.InsertParameters.Add("@lastName", txtLastName.Text)
cmd.InsertParameters.Add("@address1", txtAddress1.Text)
cmd.InsertParameters.Add("@address2", txtaddress2.Text)
cmd.InsertParameters.Add("@city", txtCity.Text)
cmd.InsertParameters.Add("@state", ddlState.SelectedItem.Value)
cmd.InsertParameters.Add("@zipCode", txtZipCode.Text)
cmd.InsertParameters.Add("@telephone", txtTelephone.Text)
cmd.InsertParameters.Add("@email", txtEmail.Text)
cmd.InsertParameters.Add("@agegroup", ddlAgeGroup.SelectedItem.Value)
cmd.InsertParameters.Add("@birthday", txtBirthday.Text)
cmd.InsertParameters.Add("@emailnotification", rbEmail.SelectedItem.Value)
cmd.InsertParameters.Add("@magazine", rbEmail.SelectedItem.Value)
cmd.InsertParameters.Add("@question", txtquestion.Text)
cmd.ConnectionString = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True"
cmd.InsertCommand = "sp_insertCustomer"
cmd.Insert()
Stored Procedure:
CREATE PROCEDURE dbo.sp_insertCustomer @firstName nchar(30),@lastName nchar(30),@address1 nchar(50),@address2 nchar(50),@city nchar(30),@state nchar(2),@zipcode nchar(10),@telephone nchar(10),@email nchar(50),@ageGroup int,@birthday dateTime,@emailNotification int,@magazine int,@question varchar(1000)
AS
INSERT tblCustomer
(firstName,lastName,address1,address2,city,state,zipCode,telephone,email,ageGroup,birthday,emailNotification,magazine,question)
Values(@firstName,@lastName,@address1,@address2,@city,@state,@zipcode,@telephone,@email,@ageGroup,@birthday,@emailNotification,@magazine,@question)
ERROR:
Procedure or Function 'sp_insertCustomer' expects parameter '@firstName', which was not supplied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Procedure or Function 'sp_insertCustomer' expects parameter '@firstName', which was not supplied.
Source Error:
Line 24: cmd.InsertCommand = "sp_insertCustomer"Line 25: Line 26: cmd.Insert()Line 27: Line 28:
I am designing a report which need to take parameter input by user when the report is open. Can anyone please tell me how to do this? Using MS SQL 2005 report. Thanks.
View 2 Replies View RelatedIs it possible to assign to a column a value passed as a parameter?
When I run the proc I get the following error :
Msg 245, Level 16, State 1, Procedure Transfer, Line 17
Conversion failed when converting the varchar value '@ID' to data type int.
----####################################################
USE [tbldata]
GO
/****** Object: StoredProcedure [dbo].[Transfer] Script Date: 05/19/2014 11:26:38 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[Transfer](@ID int)
[code].....
I am passing few parameters to the sql function to do some calculations. If the input parameter is null or blank, then I want to set the input parameter to the value zero
View 1 Replies View Relatedwhen i pass a input parameter, the SP doesn't recognize it.
like
exec SP 00004
it will print:
select * from table where idname = 4
i want it to print
select * from table where idname = '00004'
how can i do that?
Hi
I have created one SSIS package which extract data from database and put that into verious text files like Emp.txt,Add.txt like that.
Also I set one globle veriable (CityID) that help in extracting data as citywise.
When I ran it through command prompt by passing globle veriable to it like
C:setup pcaSSIS PackagesSSIS Package File Extract DataSSIS Package File Extract Data>DTExec /FILE Package.dtsx /SET Package.Variables[CityID].Value;100
it gives me data whose CityID is 100 and format it into text files.
but when i want data for another CityID (101) it overwrites my all previous text files where i kept that files.
Now my requirment is that i want to set another globle veriable that take PATH as input parameter and place these files in that path location.(How i set this path in command promt and also in SSIS)
Please guide me
Thanks
Hi
I have this procedure it is creating the proc but when I execute it gives error
Msg 137, Level 15, State 1, Line 1
Must declare the scalar variable "@ID".
Msg 137, Level 15, State 1, Line 1
Must declare the scalar variable "@nextCode".
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[GetNextAction]
(
@Code char(10),
@Track varchar(30)
)
AS
BEGIN
SET NOCOUNT ON;
Declare @ID int;
DECLARE @SQL1 VARCHAR(2000)
SET @SQL1='Select @ID = Sequence from'+' '+ @Track+ ' where Code=@Code'
EXEC(@SQL1);
Declare @nextCode varchar;
DECLARE @SQL2 VARCHAR(2000)
SET @SQL2 ='Select @nextCode= Code from '+' '+ @Track+ ' where sequence =(@ID+1)'
EXEC(@SQL2);
Declare @NextAction varchar(30);
Select @NextAction= nextAction from [dbo].[CaseStage] where Code=@nextCode;
Select @NextAction;
END
GO
Can someone correct me here
Thanks
I am trying to send XML as an input parameter for a stored procedure. I have seen many articles that do a good job of describing different variations but all the examples show the stored procedure only pulling one value (field) per record from the XML input. I need to pull 3 fields for each record.
Here is an example of the XML being passed:
<object>
<property @propID="14" @propType="4" @propValue="Blah blah text" />
<property @propID="217" @propType="2" @propValue="Some other text" />
</object>
I have a table like this in my database:
CREATE TABLE SCENE_PROPERTY_LINK (ID INT, OBJ_ID INT, PROPERTY_ID INT, PROPERTY_VALUE NTEXT)
and I want a stored procedure that will accept XML and update this table.
Here is what I am trying:
CREATE PROCEDURE sp_UpdateObject
@inValues XML
AS
BEGIN
--create a temporary table
DECLARE @props TABLE(PROPID INT, PROPTYPE INT, PROPVALUE NTEXT)
--And then insert the values from the @inValues XML argument into the temporary table
--I am sure the SELECT statement is VERY wrong
INSERT INTO @props(PROPID, PROPTYPE, PROPVALUE)
SELECT @inValues('@propID', INT), @inValues('@propType', INT), @inValues('@propValue', NTEXT)
FROM @inValues.nodes('/object/property')
--...and then I will use the temp table to update the DB table (SCENE_PROPERTY_LINK) for each record where SCENE_PROPERTY_LINK.PROPERTY_ID = @props.PROPID
AND @props.PROPTYPE != 6
END
I am sure it would be more efficient to update the DB table directly from the XML argument, without using the temporary table. But, I will settle for this solution using the temp table. I have done some work creating XML output from several stored procedures but, this is the first time I have been faced with consuming XML input in SQL.
I apologize for the long post.
Thanks in advance for any help you can provide.
i want to make a function that will take a table as input parameter. this table will be the output of a stored procedure. while i were writing the function i have an error and when i read about it i found that i can not send a table as input parameter to a function till i create a new TYPE of this table with its columns and data types as UDT but i found that sql server 2005 does not support the type 'table'...
my question now is it possible technically to make this function? is it possible to write something like that :
SELECT dbo.MyFunction(exec dbo.MystoredProc)
and in my function i am using CLR-Integration as this :
create function MyFunction
(
@TempTable table
(
ContractID int,
ContractNumber nvarchar(20),
Name_En nvarchar(80),
Name_Ar nvarchar(80),
ContractAmount money,
CurrencyID nchar(3),
DateStart smalldatetime,
DateEnd smalldatetime,
Currency_En nvarchar(30),
Currency_Ar nvarchar(30)
)
)
returns table( ContractNumber nvarchar(20),
Name_En nvarchar(80),
Name_Ar nvarchar(80),
ContractAmount decimal,
Currency_En nvarchar(30),
Currency_Ar nvarchar(30),
[Year] int,
[Month] int,
DomesticAmount decimal
)
as external name [AssemblyName].[PathOfTheFunctionInTheAssembly].[FunctionNameInAssembly]
please help me in this code as i need it urgently...
thanks in advance,
best regards,
Moustafa
I am trying to use a Execute SQL task in which I call a query and get back a scalar value. I THINK I have it set up correctly, yet I am getting a very unhelpful error message of:
Error: 0xC002F210 at Determine Previous Trade Date, Execute SQL Task: Executing the query "SELECT[Supporting].[dbo].[fGetOffsetTradeDate](?, -1) AS [PreviousTradeDate]" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
The Parameter Mapping has a single INPUT entry of data type DATE mapped to parameter 0.
The Result Set property (in General) is set to Single Row and there is a single entry in the Result Set config which maps [PreviousTradeDate] to a variable.
Odd thing is, if I replace the ? in the query with a date (say '03/24/2006') everything works fine. This would indicate that my query syntax is fine.
hi,
how to pass Datasource Name as input parameter from command propmt to rdl file in sql server 2005?
Thanks,
shanthi
Hello,
I have the following issue:
I have the following statement into a function:
select a,b form T where c IN @parameter
t is the table
c is datatype= integer
@parameter is a input parameter in the function, the @parameter contains more values and passed as a string.
Running the statement above I got an error due to conversion type.
How can I pass a list of parameters in the @parameter variable to make the statement works?
Thank in advance.
Hi All,
I have a project which will be a tools to edit different tables.
Now I need a stored_procedure to select data from different table.
For example I have a table name "TableFields" which have "tableID","FieldName", "DataType"and so on columns.
It has the following records.
"1","EmployeeID","Varchar"
"1","FirstName","varchar"
"1","LastName","varchar"
"1", "EmployedDate","date"
It has the following records.
"2","AddressID","int"
"2","ApartNo","varchar"
"2", "Address","varchar"
Then I have table named "Employee" has columns "employeeID","FirstName","LastName","EmployedDate" which have the following data,
"001","Susan","Daka","1999-09-09",
"002","Lisa","Marzs","1999-08-08",
"003","David","Smith","2000-01-01",
I also have address table has columns "AddressID","ApartNo","Address" and has the following data
"1","1101","1208 Mornelle Crt, Toronto",
"2","1209","1940 Garden Drive, Toronto"
I need to create a stored procedure to select data from table "employee " or table "address" or even other tables according to information from "TableFields."
So the table's name can be know as a input parameter, but the fields name will be a list of values and it all depends on tables.
I want to use fields name as a long string separated by",", like I have input "EmployeeID, FirstName,LastName" as an input parameter. But I don't know how to split the string.
Second, I need to create a stored procedure to insert or update data into these dynamically table.
Can anyone help me?
Thanks in advance.
Hello All,
I have a requirement, where the number of parameters being to a stored procedure, is not fixed. It is to have a list of computers, belonging to a particular Domain, or, more DOMAINS or maybe just a list irrespective of the Domain. For this, the @Domain parameter, could have one value, or more values, or no values as well. Can you please let me know how do I go about this?
Thanks a lot.
Mannu.
Hi,
i wanna know if i can use a vector (or an array) for input parameter to a Stored Procedure? Can anyone give me example or links?
thanks