this data. need help
Sort following numbers by asc and desc order
Before query sort
-1.1
-8.8
-15.5
0.0
+0.5
+0.2
Sort asc
+0.5
+0.2
0.0
-1.1
-8.8
Sort Desc
-8.8
-1.1
0.0
+0.2
+0.5
Hi,
Anyone can help me for the Sql query?
I want to sort a table with a priority column, e.g. in the following...
Table A
======
value
======
9
3
1
7
4
======
After sorting:
Table A
========
no value
========
1 1
2 3
3 4
4 7
5 9
========
Anyone can help me?
Thanks.
Daniel.
I'm moving data from one database to another (INSERT INTO ... SELECT ... FROM ....) and am encountering this error:
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
My problem is that Line 6 is:
set @brn_pk = '0D4BDE66347C440F'
so that is obviously not the problem and my query has almost 200 columns. I can go through one by one and compare what column is int in my destination table and what is varchar in my source tables, but that could take quite a while. How I can work out what column is causing the problem?
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies View RelatedCannot use dynamic sql in current context. So need some help regarding this.I am developing a stored procedure to update a table. Sending Column names as parameters, but not able to use them as given below.INSERT INTO Books (@Column1, @Column2) values.. Any way to execute without using dynamic sql?..Thanx.
View 1 Replies View RelatedHi,
This is my complete trigger.
ALTER TRIGGER DeleteTriggerC_Middleware_Exception ON dbo.C_Middleware_Exception AFTER DELETE AS
BEGIN
DECLARE @RowCount AS VARCHAR
SET @RowCount = @@ROWCOUNT
DECLARE @TableName_Deleted AS VARCHAR(50)
DECLARE @ErrorMsg_Deleted AS VARCHAR(255)
DECLARE @AddlErrMsg_Deleted AS VARCHAR(255)
DECLARE @SubjectArea_Deleted AS VARCHAR(25)
DECLARE @CHKPT_Deleted AS VARCHAR(10)
SELECT @TableName_Deleted = table_name , @ErrorMsg_Deleted = cast(error_msg AS varchar(255)) , @AddlErrMsg_Deleted = cast(addl_error_msg AS varchar(255)),
@SubjectArea_Deleted = cast(SUBJECT_AREA AS varchar(25)), @CHKPT_Deleted = cast(CHKPT AS varchar(255))FROM DELETED
--where subject_area = 'inventory'
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE Table_Name = @TableName_Deleted
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area IS NULL and ChkPoint IS NULL
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @AddlErrMsg_Deleted like Addl_Error_Msg
END
IF @@ROWCOUNT = 0
BEGIN
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area = @SubjectArea_Deleted and ChkPoint = @CHKPT_Deleted
END
END
when i am executing the follwing query i am gettin systax error.
Query :delete from dbo.c_middleware_exception where subject_area = 'eap_room'
Error :
Server: Msg 245, Level 16, State 1, Procedure DeleteTriggerC_Middleware_Exception, Line 17
Syntax error converting the varchar value '*' to a column of data type int.
what could be the solution.
Thanks in advance
yvnsmca
I have an inventory database that Im trying to create a report out ofthe IP address are a lookup on a seperat table but I keep getting theabove error can I change the table row to something to fix this orwhat.SELECT i.INVENTORY_ITEM_ID AS [IP Address],i.HOST_NAME AS [ServerName], '' AS Flag, i.MEMO AS Comments, 'Seattle' AS City, 'Washington'AS State,CASE WHEN fv.value = 'EL EET1410' THEN '1111 3rdAve.' WHEN fv.value = 'EL WFL17' THEN '999 3rd Ave.' ELSE '' END AS[Address 1],' ' AS [Address 2], CASE WHEN fv.value = 'ELEET1410' THEN '1111' WHEN fv.value = 'EL WFL17' THEN '2222' ELSE ''END AS [Building ID],fv.VALUE AS Building, '98101' AS Zip,CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Computing FacilityLevel],CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Bldg Floor],CASE WHEN fv.value = 'EL EET1410' THEN 'C028'WHEN fv.value = 'EL WFL17' THEN 'C123' ELSE '' END AS WSPID,i.LOCATION_IN_FACILITY AS Location,i.SERIAL_NUMBER AS [Serial Number], i.ASSET_TAG AS [Asset Tag], ' ' AS[Second Asset Tag(s)],vv.VALUE AS Manufacture, mv.VALUE AS Model,'Yes' AS [Rack Mountable], rv.VALUE AS [Rack Units], 'DEV' AS [ServerEnviroment],lv.VALUE AS [Sever Type], ov.VALUE AS OS,CASE WHEN lv.value = 'Server - Intel Blade' THEN'Windows' WHEN lv.value = 'Server - Intel' THEN 'Windows' WHENlv.value = 'Server - Unix' THEN 'Unix'ELSE '' END AS [OS Type], '19x28' AS Footprint,ev.VALUE AS [Technical Owner of Server], 'N/A' AS [SLA Category],i.ON_BOARD_NIC_PORT_COUNT AS [NW Connectionquantity], 'Devlopment/Test Machine' AS [Application(s) Name],ev.VALUE AS [PW Contact],'N/A' AS RTO, 'N/A' AS RPO, 'No' AS [Is BoxClustered?], 'N/A' AS [Buisness Critical],CASE WHEN mv.value = 'Proliant DL580G1' THEN'90lbs' WHEN mv.value = 'Proliant DL360G2' THEN '85lbs' WHEN mv.value= 'Enterprise 220R' THEN'45lbs' ELSE '' END AS Weight,i.LAST_MODIFIED_DATE AS [Date of Last Install], 'No' AS [DedicatedCircuit]FROM dbo.INVENTORY_ITEM i LEFT OUTER JOINdbo.IP_TO_INVENTORY pv ON pv.IP_ADDRESS = i.INVENTORY_ITEM_IDLEFT OUTER JOINdbo.LOOKUP_VALUE lv ON lv.LOOKUP_VALUE_ID =i.DEVICE_TYPE_ID LEFT OUTER JOINdbo.LOOKUP_VALUE fv ON fv.LOOKUP_VALUE_ID =i.FACILITY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE vv ON vv.LOOKUP_VALUE_ID =i.VENDOR_ID LEFT OUTER JOINdbo.LOOKUP_VALUE mv ON mv.LOOKUP_VALUE_ID =i.MODEL_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ov ON ov.LOOKUP_VALUE_ID =i.SOFTWARE_VERSION_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ev ON ev.LOOKUP_VALUE_ID =i.CHECKED_OUT_BY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE rv ON rv.LOOKUP_VALUE_ID =i.U_HEIGHT_ID
View 2 Replies View RelatedI am unable to get FTS working where the column to be searched is type varchar(MAX) or Text. I can get this to work if my column to be indexed is some statically assigned array size such as varchar(1000).
For instance this works, and will return all applicable results.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](1000) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
And this does not. It returns zero results what so ever.
CREATE TABLE [dbo].[TestHtml](
[ID] [int] IDENTITY(1,1) NOT NULL,
[PageText] [varchar](MAX) NOT NULL,
CONSTRAINT [PK_TestHtml] PRIMARY KEY CLUSTERED
SELECT * FROM TestHTML WHERE Contains(PageText, @searchterm);
Could someone please tell me what I need to do to enable FTS on varchar(MAX) or Text columns?
SQL server 2000
Note : GRP_ID integer
declare @SchDnGRP VARCHAR(50)
SET @SchDnGRP='29,30'
SELECT USR_ID_ARY from AD_USR_GRP Where GRP_ID in(@SchDnGRP)
i got error like
Syntax error converting the varchar value '29,30' to a column of data type int.
if need any sql server Configuration requie, please advice to me
I have a table(tab1) with a column(col1) of type varchar. I insert a row with an integer value(1). And when i query the table using the sql, select col1 from tab1 where col1 = 1, it works fine.
But after i insert a varchar, say 'a' and then do the same query, i get an error message saying, "Syntax error converting the varchar value 'a' to a column of data type int.". Why is this so? Please reply.
Well I am doing a simple insert through a stored procedure..., but I am getting this error. In my table I have the UserID as a VARCHAR 100. I am storing from a textbox that will have number because its there email. But I am not converting anything. Do I need to convert in this scenario??
Server Error in '/pickem' Application.
Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int.Source Error:
Line 113:
Line 114: dbConnection.Open
Line 115: Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Line 116:
Line 117: Dim rowsAffected As Integer = 0
Here is the code: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(ConfigurationSettings.AppSettings("connString"))
Dim myCommand as New SqlCommand("prcAddTeam", dbConnection) myCommand.CommandType = CommandType.StoredProcedure
myCommand.Parameters.Add("@UserID", SqlDbType.Varchar, 100).Value = TRIM(emailBox.Text) myCommand.Parameters.Add("@TeamName", SqlDbType.Varchar, 40).Value = TRIM(teamBox.Text) myCommand.Parameters.Add("@Address1", SqlDbType.Varchar, 50).Value = TRIM(addressBox.Text) myCommand.Parameters.Add("@Address2", SqlDbType.Varchar, 50).Value = TRIM(address2Box.Text) myCommand.Parameters.Add("@City", SqlDbType.Varchar, 50).Value = TRIM(cityBox.Text) myCommand.Parameters.Add("@State", SqlDbType.Varchar, 30).Value = stateList1.SelectedItem.Value myCommand.Parameters.Add("@Zip", SqlDbType.Varchar, 11).Value = TRIM(zipBox.Text) myCommand.Parameters.Add("@FirstName", SqlDbType.Varchar, 50).Value = TRIM(firstNameBox.Text) myCommand.Parameters.Add("@LastName", SqlDbType.Varchar, 50).Value = TRIM(lastnameBox.Text)
dbConnection.Open Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Dim rowsAffected As Integer = 0
dbConnection.OpenStored procedure:CREATE PROCEDURE prcAddTeam @UserID VARCHAR(100) ,@TeamName VARCHAR(40) ,@Address1 VARCHAR(50) ,@Address2 VARCHAR(50) ,@City VARCHAR(50) ,@State VARCHAR(30) ,@Zip VARCHAR(11) ,@FirstName VARCHAR(50) ,@LastName VARCHAR(50) ASSET NOCOUNT ONDECLARE @ID INTSET @ID = 0SELECT @ID = ISNULL((SELECT UserID from tblUserInfo where UserID = @UserID),0)IF @ID = 0 BEGIN INSERT INTO tblUserInfo (UserID,TeamName,Address1,Address2,City,State,Zip,FirstName,LastName,CreateDate) VALUES(@UserID,@TeamName,@Address1,@Address2,@City,@State,@Zip,@FirstName,@LastName,GetDate()) SET @ID = @@IDENTITY END
I have looked far and wide and have not found anything that works to allow me to resolve this issue.
I am moving data from DB2 using the MS OLEDB Provider for DB2. The OLEDB source sees the column of data as DT_TEXT. I setup a destination to SQL Server 2005 and everything looks good until I try and run the package.
I get the error:
[OLE DB Source [277]] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft DB2 OLE DB Provider" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
[OLE DB Source [277]] Error: Failed to retrieve long data for column "LIST_DATA_RCVD".
[OLE DB Source [277]] Error: There was an error with output column "LIST_DATA_RCVD" (324) on output "OLE DB Source Output" (287). The column status returned was: "DBSTATUS_UNAVAILABLE".
[OLE DB Source [277]] Error: The "output column "LIST_DATA_RCVD" (324)" failed because error code 0xC0209071 occurred, and the error row disposition on "output column "LIST_DATA_RCVD" (324)" specifies failure on error. An error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "OLE DB Source" (277) returned error code 0xC0209029. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
Any suggestions on how I can get the large string data in the varchar column in DB2 into the varchar(max) column in SQL Server 2005?
Hello, I have worked with SQL Server 2000 but now we have a requirement where I need to write values from an asp.net form into an XML type in SQL Server 2005.
I have never used XML as a type in SQL Server 2005. How do we write xml into xml type.
For example the structure of XML is something like:
<application>
<applicationID = "value"></applicationID>
<customerName="value></customerName>
</application>
I have to write this kind of XML into the XML type and later retrieve these XML values and populate the form again.
Kindly suggest. Thanks a lot.
Hello Guys,Have been getting this error(
Implicit conversion from data type ntext to varchar is not allowed. Use the CONVERT function to run this query.
) when running on the live environment but it was fine when run locally. If anyone has similar problem please let me know the fix you have done.
Thank you.
I have the following code and i want to passed more than one value:
DECLARE @myvendedor AS varchar(255)
SET @myvendedor = '87,30'
print @myvendedor
SELECT top 10 ECOM.COM1,* from ecom (nolock) WHERE ecom.PORVEND=1 AND ECOM.VENDEDOR IN (@myvendedor)
Table Field ECOM.VENDEDOR is Numeric(4,0)
This error occur:
87,30 --Result of PRINT
Msg 8114, Level 16, State 5, Line 6
Error converting data type varchar to numeric.
I change :
DECLARE @myvendedor AS numeric(4,0)
and this error appear:
Msg 8114, Level 16, State 5, Line 2
Error converting data type varchar to numeric.
I have a requirement like below .
Input table will be like below:
eventdata:
accountID deviceID timestamp speedKPH address
--------- -------- ---------- -------- -------------
preva1 bolero 1359089006 15 Ullalu Road
preva1 bolero 1359088796 0 Ullalu Road
preva1 bolero 1359088886 0 Ullalu Road
preva1 bolero 1359088888 8.47 Ullalu Road
preva1 bolero 1359088986 0 Ullalu Road
preva1 bolero 1359088988 45 Ullalu Road
preva1 bolero 1359088996 21 Ullalu Road
preva1 bolero 1359088998 0 Ullalu Road
preva1 bolero 1359089006 15 Ullalu Road
preva1 bolero 1359089009 12 Ullalu Road
preva1 bolero 1359089006 15 Ullalu Road
preva1 bolero 1359089016 0 Ullalu Road
preva1 bolero 1359089026 0 Ullalu Road
So here i need output table like below:
stoppagedetails:
accountID deviceID from_timestamp to_timestamp diff
--------- -------- ---------- -------- -------------
preva1 bolero 1359088796 1359088888 92
preva1 bolero 1359088986 1359088988 2
preva1 bolero 1359088998 1359089006 8
preva1 bolero 1359089016
How to write mysql query for the above requirement.
Hello, I have worked with SQL Server 2000 but now we have a requirement where I need to write values from an asp.net form into an XML type in SQL Server 2005.I have never used XML as a type in SQL Server 2005. How do we write xml into xml type. For example the structure of XML is something like:<application><applicationID = "value"></applicationID><customerName="value></customerName></application>I have to write this kind of XML into the XML type and later retrieve these XML values and populate the form again.Kindly suggest. Thanks a lot.
View 1 Replies View RelatedI am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.
I am also including example of how the account_numbers are formatted.
R222209
R222220
R222222
R222212
R221123
F707768
[Code] .....
As per my requirment using below script to convert from varchar to numeric.
declare @stg varchar(50)
set @stg='12,000,00'
select CONVERT(NUMERIC(17,2),@stg)
Getting error : Error converting data type varchar to numeric
I have problem to execute query with interval date.
If try this query I don't have problem and the output is correct:
SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '01/01/2015', 121)
AND CONVERT (datetime, '09/01/2015', 121);Instead if try this I have error:
SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '25/01/2015', 121)
AND CONVERT (datetime, '28/01/2015', 121);
[Err] 22007 - [SQL Server]The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
OK, so I have this query where I'm trying to subtract values like this, when I do this I am getting (Arithmetic overflow error converting varchar to data type numeric.) I have tried many different things, and now of these work, it'll either return 0 because it loses the .XXXXX.
Convert(DECIMAL(10,7),CAST([TIME_OF_COMPLETION] as DECIMAL(10,7)) - Convert(DECIMAL(10,7),CAST([OPR_DELIVERED_TIME] as DECIMAL(10,7)) round(cast(cast(hist.[TIME_OF_COMPLETION] AS float) as DECIMAL(15, 5)) - CAST(hist.[OPR_DELIVERED_TIME] AS FLOAT),1 SELECT convert(FLOAT,CAST('735509.00053' AS DECIMAL(10,5))) - convert(FLOAT,CAST('735509.00047' AS DECIMAL(10,5)))
Hi All
I want to retrieve the data type of table column and validate the input data whether same as data type of table column before insert into database. Any suggestion?
I use asp.net + msde
Thank you.
I have a DB named zCIFRecord with a column named CIFUpdateDate which is of datatype varchar. The data is a date MM/DD/YYYY 01/30/2008, this is al that is in this column. I can search this colum for individual dates and for a range of dates. My problem is with a range of dates that is not within the same year, such as;
SELECT [CIFPan]
,[CIFMemNum]
,[CIFLName]
,[CIFFName]
FROM [FutureSoft].[dbo].[zCIFRecord]
WHERE [CIFUpdateDate] between '12/01/2007' and '01/30/2008'
will return nothing because it seems to only search on the 12 then the 01 then the 2008. this search can be performed properly on dates within the same year such as;
SELECT [CIFPan]
,[CIFMemNum]
,[CIFLName]
,[CIFFName]
FROM [FutureSoft].[dbo].[zCIFRecord]
WHERE [CIFUpdateDate] between '01/01/2008' and '01/30/2008'
will return the proper values because now all the numbers are in correct order. How can i create a search that lets me perform the first query as well as the second query. I tried to convert to a float but you cant convert a varchar to a float.
Dear All,
I inserted a record in table on DB created on SQLServer 2005 and found out that the one of the column values is shown as '??????' instead of showing the encrypted value that I sent with the insert statement.3
............................ Can anyone tell me how to get rid of this?
Thanks and regards,
Z Z.
Can i still get the sum of a field even if the data type is of type varchar?
thanks!
Funnyfrog
I have a table with column "Data" as VARCHAR, with entries like below.
1
11
2
A1
A10
A11
246
AB1
AB10
100
256
B1
B2
124
20
B21
B31
32
68
I want to select the data by converting varchar to int for numeric values and for alphanumeric it should display as it is.
SELECT CAST(dataAS INT) FROM record_tab
getting below error
Conversion failed when converting the varchar value 'A1'
I encounter this particular error.
Exception Details: System.Data.SqlClient.SqlException: The data types varchar and text are incompatible in the equal to operator.
Line 21: Dim reader As SqlDataReader = command.ExecuteReader()
This is the first time I'm trying out with MS SQL so I'm abit lost. I hope my code is correct and I've did a little search. I did not set "Text" in my database, I use int and varchar. Here's the affected part of my code and the database. Dim password As String = ""
Dim querystring As String = "SELECT Password FROM Member WHERE Username = @username"
'Dim conn as SqlConnection
Using conn As New SqlConnection(ConfigurationManager.ConnectionStrings("mainconnect").ConnectionString)
Dim command As New SqlCommand(querystring, conn)
command.Parameters.Add("@username", SqlDbType.Text)
command.Parameters("@username").Value = txtLogin.Text
conn.Open()
Dim reader As SqlDataReader = command.ExecuteReader()
While reader.Read()
password = reader("Password").ToString()
End While
reader.Close()
End Using
My database:
User_ID int(4)
Username varchar(50)
Password varchar(255)
Email varchar(50)
Any ideas?
I am parsing a documnet and i am grabbing that document into a variable of datatype varchar. The document contains more than 8k(upto 30k characters) characters. So how can I handle this situation.How can I get that document into my local varchar variable.
thanks.
Dear friends,
A simple question to you... witch of this dataflow destination is better for performance to write data in a SQL Server 2005:
1. SQL Server Destination?
2. OLEDB Destination?
3. Other?
Thanks!
can anyone see as to why I would get this error with the following SP?
ALTER PROCEDURE [dbo].[SP]
@ID int = 0,
@emailFrom VARCHAR(50) = Null,
@emailDate VARCHAR(50) = Null,
@emailSubj VARCHAR(50) = Null,
@emailTxtBody VARCHAR(1000) = Null,
@emailHtmlBody VARCHAR(1000) = Null
AS
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @Notes VARCHAR (8000)
DECLARE @TicketID INT
DECLARE @emailBody VARCHAR (1000)
DECLARE @Length Int
SET @Notes = ''
SET @Length = LEN(@emailSubj)
-- insert a new entry
INSERT INTO PopEmail
( emailFrom, emailDate, emailSubj, emailTxtBody, emailHtmlBody )
VALUES
( @emailFrom, @emailDate, @emailSubj, @emailTxtBody, @emailHtmlBody )
-- get the new ID
SET @ID = @@identity
If ( @ID <> 0 ) AND ( ISNUMERIC(@emailSubj) = 1 )
Begin
IF @emailTxtBody IS NULL
BEGIN
Set @emailBody = @emailHtmlBody
PRINT '@emailHtmlBody: ' + @emailBody
END
ELSE
BEGIN
SET @emailBody = @emailTxtBody
PRINT '@emailTxtBody: ' + @emailBody
END
SET @TicketID = CAST( @emailSubj AS int )
SET @Notes = @emailFrom + ', ' + @emailDate + ', ' + @emailBody
Select @ID = ID From TicketDetails Where TicketDetails.TicketID = @TicketID
Exec differentSP @ID, @TicketID, @Notes
PRINT 'Subject: [' + @emailSubj + ']'
print 'length: ' + CAST(@Length as varchar (10))
Print 'emailSubj: ' + CAST( @emailSubj AS int )
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
PRINT 'TicketID: ' + Cast( @TicketID AS Varchar ( 10 ) )
PRINT 'Notes: ' + @Notes
PRINT 'ID: ' + Cast( @ID as varchar ( 10 ) )
END
ELSE
BEGIN
Print 'ID: ' + CAST(@ID AS VarChar(10))
PRINT 'ISNUMERIC: ' + CAST(ISNUMERIC(@emailSubj) AS VarChar (10))
PRINT 'Subject: [' + @emailSubj + ']'
END
I have a table with a column (locationID) of int data type, I want to pass a list of locationID's to a stored procedure using the IN operator (e.g. WHERE LocationID IN (list of locationID's)). What can I do to achieve this????
My stored procedure looks like this:
CREATE PROCEDURE [sp_test]
@sLocIDs varchar(30)
AS
select count(distinct TimeZoneID) As timezones,
from dimLocation
WHERE LocationID IN (@sLocIDs)
When I test it:
exec sp_test
@sLocIDs = '1,2,10'
I get "Error converting data type varchar to int"
when i execute my store procedure it give this error.
USE [CWMNEW]
GO
DECLARE@return_value int
EXEC@return_value = [dbo].[BOQ]
SELECT'Return Value' = @return_value
GO
[code]....
Hi,
I have a parameter @name varchar(50)
but the table has a field with datatype GUID
how I can convert varchar to guid before insertion...
Thanks