An Access OnFormat Procedure Would Be Replaced In SQL Reporting Services By What?
Mar 27, 2007
In the field, the operators are presented with 5 categories, each category having between 3 and 5 possible selections, for example:
Weather - clear(1), cloudy(2), rain(4) or snow(8).
If the operator selected cloudy and rain, the value of Weather would be 6.
I want to print a report in the office that will list the categories and the available selections for each, putting an "X" next to those selections that were checked by the operators.
In Access, it was easy - I plugged a decode procedure into the OnFormat event...
cnum = obj![WEATHR]
If cnum - 8 >= 0 Then
obj![SNOW] = "X"
cnum = cnum - 8
End If
If cnum - 4 >= 0 Then
obj![RAIN] = "X"
cnum = cnum - 4
End If
If cnum - 2 >= 0 Then
obj![CLOUDY] = "X"
cnum = cnum - 2
End If
If cnum - 1 >= 0 Then
obj![CLEAR] = "X"
End If
Making the change to SQL Reporting Services, I'm clueless...as you can tell, I'm not even sure how to ask the question.
Any help would be greatly appreciated.
View 3 Replies
ADVERTISEMENT
Mar 12, 2007
Hi There,
Our DBA has installed reporting services on a server and now in order to access the report manager, one has to be an Admin on that Server. I am guessing that there is a mistake in the configuration of Reporting Services. Usually it should allow anybody who was added to the roles in the properties section of the Report Manager, right? I have also added the users to the DB..
Also I am using Windows Authentication to access Report Catalog items (Reporting Services is installed on Server2) from a web Application(deployed on Server1) and displaying the report using report viewer. For some reason, server1 has to be in an Admin role on Server2 to access the report catalog/report. This is kinda strange for me as I don't want everybody to be an Admin on Server2. Can anybody please point in the right direction?
Thanks.
View 3 Replies
View Related
Sep 10, 2015
Is there any way to get more information for when IAuthorizationExtension::CheckAccess fails to grant access to a report item for the current user? Specifically, it would be useful to know:
1. URL of attempted report
2. IP address of user agent
3. Identity of current user
4. Date/Time of the failed attempt
ssrs2014
View 7 Replies
View Related
May 8, 2015
I started my Reporting Server and if I use the Internet Explorer as a Administrator everything works fine.But if I don't open it as an admin it calls "rsAccess Denied The user [...] does not have the permission...".Problem is that I want to run it in an SAP Program with an HTML Viewer. how I can get those Permissions ?By the way somehow I'm not able to create or change roles in the Microsoft SQL Server Management Studio.
View 5 Replies
View Related
Sep 21, 2006
I downloaded SQL server Express w/ Advanced services with the intention of using reporting services on my webhost server and SQL on a seprate data server.
I made a report in VS2k5 which ran perfectly off of a local server but when I tried to deploy my reports to the web server it informed me that
The
feature: "Remote access to report data sources and/or the report server
database" is not supported in this edition of Reporting Services.Can that be so!? Is it as it seems, that Reporting services for SQL Express simply cannot connect to a remote DB, or did I simply fail to configure my service properly?
and if it wasnt built to remote connect then is there a work around for this issue?
Thanks in advanced
View 5 Replies
View Related
Jul 1, 2015
SRSS server is defined with various reports. Data located on another server. Database connection defined on SRSS server.how would you configure SRSS server to be accessed from internet, without going through VPN connection? we have a defined server that is accessible from internet.
View 2 Replies
View Related
Feb 24, 2004
Getting the following error when trying to import an Access 2002 database into Microsoft Reporting Services:
--The given path's format is not supported--
Please advise if you know what this is referring to.
View 2 Replies
View Related
Dec 10, 2014
If I log on to the SQL server and using IE go to http://sql1/reportServer I see the reportServer webpage just fine.However if I go to another server in the same domain and do exactly the same thing (same user account, same URL) I get a windows box asking for username and password. It doesn't matter what username I use I still get prompted for username and password.
I've looked in the sys.dm_exec_connection and it says NTLM so I am guessing that SPN are not the cause.
We have another SQL instance on the same SQL server and you can reach the reporting webpage just fine no matter where you are.
The only thing I have noticed different is the working instance has login for DPM$ (being a DPM instance) but the default instance does not have a SQL1$ entry. Don't know if that is important.
View 2 Replies
View Related
Jun 26, 2007
Folks:
Does a USER need to be a ADMIN on the BOX for user to access the Reporting Services (2005) using following link REMOTELY:
Any Idea what kind of access is required?
http://SERVER NAME/reports/
Thanks !
View 1 Replies
View Related
May 19, 2015
Previously I was using SSRS to create a local website(native mode) for our domain users to access. I wonder whether it is possible to share the website to outside users(just like youtube, everyone can access it). Is there a possible way to achieve that?
View 3 Replies
View Related
Feb 29, 2008
I have report server setup on the same machine where the sql server 2005 db is setup, as well as iis running the website. i simply need to get report server running to allow internet access. I have report server setup so that it is running locally (localhost), however, as soon as I change the iis site settings to a domain name, report server stops working properly. This looks like a permissions issue, Ive tried different combinations of settings, but nothing works. Any insight on how I can get report server setup for internet access (forms authentication), would be much appreciated.
thanks, lance
View 1 Replies
View Related
Nov 20, 2015
I am trying to grant access to groups on my reports... The thing is that, whenever I try a distribution list I would get...user or group name is not recognized... (rsUnknownUserName)
1-how can I recognize if it is a group or a distribution list in advance...
2- why can't I grant access to distribution lists?
View 5 Replies
View Related
Nov 18, 2015
I have developed  SSRS reports and deployed to the SSRS Reporting server. Everything works fine.Â
But How can i access these reports in Java application ?
View 3 Replies
View Related
Dec 19, 2006
I have data on server A and the report server on server B.
I have created reports that I can run through report manager (on server B).
I have depolyed the reports but when I try to run the reports on client computers I get the following error:
An error has occurred during report processing. (rsProcessingAborted) Get Online Help
Cannot create a connection to data source 'ABCD'. (rsErrorOpeningConnection) Get Online Help
SQL Server does not exist or access denied.
I have tried setting different credentials ... windows security, specified username and password to credentials not required ...
All give above error.
TIA
View 4 Replies
View Related
Mar 4, 2008
Hello,
SQL Server Reporting Services 2005 (SSRS) is installed on Vista Ultimate.
I cannot access to the http://localhost/ReportServer page. IE posts an internal error HTTP 500.0 (after IE required a Windows account).
All the configurations of Reporting Services are OK. In the Log file, there is nothing: the Web Services does not seem to be launched.
By continuing the investigations in IIS 7 (activation of the €œRules of follow-up of the requests having failed€?, I found the error following:
IIS Trace Detail Highlights
No. EventName Details Time
53. MODULE_SET_RESPONSE_ERROR_STATUS Warning
ModuleName="IsapiModule", Notification="EXECUTE_REQUEST_HANDLER", HttpStatus="500", HttpReason="Internal Server Error", HttpSubStatus="0", ErrorCode="Syntaxe du nom de fichier, de répertoire ou de volume incorrecte. (0x8007007b)", ConfigExceptionInfo="" 09:02:33.716
Translation of the french sentence: ErrorCode="Incorrect syntax of the file name, the directory or the volume."
I made a full research on Internet and in the documentation at my disposal and I did not find anything which can advance me towards a beginning of solution€¦
Thank you with all for the assistance which you will be able to bring to me.
View 4 Replies
View Related
May 24, 2015
I am just wondering if i can control the access of range of variables from users' logins.
To be more specific, if i a parameter alpha has five values (1,2,3,4,5) and then i have 3 users A, B C, what i need is:
1. A can access Vaues(1, 3)
2. B can access Values (2, 4)
3. C can access Values(3,5)
Is there anyway i can do this either from the stored procedure i am getting the data or i can do it on SSIS development side?
View 4 Replies
View Related
Sep 10, 2015
I want to give the permission to a user to view only one folder among 10 folders on Home page of report server. I don't want that user to view other folder than his/Her Own folder on report server home page.
I went through the below URL but it didn't work.
[URL]
View 10 Replies
View Related
Apr 28, 2015
I have a question about ssrs security. In report manager I have set a list of users as browsers, and the builtin administrators are content manager in the parent folder where reports are. A user that is not an administrator and neither a user I added, has access to reports.
I'm thinking this person is having access because the data source of the reports use a administrator account to connect to the analysis services  using the option Credentials stored securely in the report server with the 2 checkboxes marked (use as windows credentials when connecting to the data source and impersonate the authenticated user).
I simply marked this option because SSRS is in 1 server and SSAS in other and I think kerberos need to be configured and I haven't looked into it, but I think the report access is separated from the data source.
View 2 Replies
View Related
Feb 24, 2007
Hi
I have created CLR Stored Procedure and my CLR stored procedures are not appearing in the Stored Procedures drop-down list located on the Data tab within the VS2005 Business Intelligence Development Studio. After Creating the dll I have registered the dll like that CREATE ASSEMBLY MY_SP_NAME from 'C:MY_DLL_PATHMY_DLL_NAME.dll' WITH PERMISSION_SET = SAFEAfter registering I have deployed the dll :CREATE PROCEDURE [dbo].[MY_SP_NAME] @dbname [nvarchar](4000), @varTable [nvarchar](4000), .............. .............. .............. ASEXTERNAL NAME [MY_DLL_NAME].[MY_CLASS_NAME].[MY_SP_NAME]GOEXEC sys.sp_addextendedproperty @name=N'AutoDeployed', @value=N'yes' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOEXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFile', @value=N'EXAMINER_WORKSHEET_F_hmz4_Ex.cs' , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOEXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFileLine', @value=10 , @level0type=N'SCHEMA',@level0name=N'dbo', @level1type=N'PROCEDURE',@level1name=N'MY_SP_NAME'GOThe Stored Procedure is deployed successfully to SQL Server 2005, but its not showing in the drop-down list located on the data tab while I am desiging my RDL layout.All of the non-CLR stored procedures are present. Is there something I need to do to add these CLR stored procedures?
Please please ASAP.
Thanks
Tareqe
View 4 Replies
View Related
Apr 24, 2008
Hi all,I am using Stored procedure to design report instead of Query.
Problem is i am unable to view the fields in the dataset.
Any body please tell me the Steps to use Stored procedure in Reporting Services design.
Regards.
View 7 Replies
View Related
Sep 22, 2015
I have a dashboard page that I would like to load fast. But I would also like the user to be able to run the report On-Demand. The report has start date and end date parameters which default to the first and last day of last month. If I use a Cache plan that loads at 6AM the report runs with the default parameters set in the report, the user has to wait until it completes before they can change the parameters.
If I uncheck "use default" parameters in the report I lose the ability to set a cache refresh plan with the default parameters because the option is greyed out. So is there anyway outside of creating a second copy of the report to allow a user to open a report, change the parameters and run it, but also have a way to schedule some sort of Cached report for the default parameters so I can put that on a WebPart page that would load instantly?
View 4 Replies
View Related
Jan 21, 2008
I am in a project where we are using a vanillla Reporting Services 2005 with the builtin report portal. No sharepoint integration yet.
We have successful deployments where we limit access to different folders based on AD-accounts and groups. In this particular case I have a folder for which I would like to allow access to all AD-users within the entire company.
So basically I know how to limit access but I don't know how to enable access for everyone. Is there a simple way to do it? I have googled and search mshelp but I couldn't find anything. I will admit to the search being quite quick but as usual time is short.
View 1 Replies
View Related
Nov 18, 2015
I just setup a developer as a site admin in SSRS, he has administration rights to the site and also rights on folders that contain reports. He can access the reports folders no problem, however when he tries to access the "Home" folder he get's the error shown below.Â
UAC is switched off an other people are able to access this ok.Â
View 5 Replies
View Related
May 12, 2008
I know from searching this forum that there have been many variations of the issue I'm currently suffering, but I haven't found anything quite like mine or a solution to solve it. The issue I'm running into is that I am unable to log on to Reporting Services using Management Studio or the web interface when Windows Integrated Security is enabled. I have full functionality using basic security, but the risks involved make it impossible to deploy basic authentication out into production. The error I'm receiving in Management Studio is The request failed with HTTP status 401: Unauthorized. (Microsoft.SqlServer.Management.UI.RSClient). I recieve the same error when I try the web interface.
I've looked the most recent logfile in WindowsSystem32LogFilesW3SVC1 and these entries match up to the time I attempted my authentication.
Code Snippet
2008-05-12 20:30:42 <Edited: Server IP> GET /reports - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:42 <Edited: Server IP> GET /reports - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 301 0 0
2008-05-12 20:30:42 <Edited: Server IP> GET /reports/ - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:46 <Edited: Server IP> GET /reports/home.aspx - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 302 0 0
2008-05-12 20:30:46 <Edited: Server IP> GET /reports/Pages/Folder.aspx - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 2 2148074254
2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 0
2008-05-12 20:30:47 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 2148074248
2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 2 2148074254
2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 0
2008-05-12 20:30:49 127.0.0.1 POST /ReportServer/ReportService2005.asmx - 80 - 127.0.0.1 - 401 1 2148074248
2008-05-12 20:30:50 <Edited: Server IP> GET /reports/Pages/Folder.aspx - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 500 0 0
2008-05-12 20:30:50 <Edited: Server IP> GET /Reports/js/ReportingServices.js - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:50 <Edited: Server IP> GET /Reports/js/ReportingServices.js - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/styles/ReportingServices.css - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/blank.gif - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/blank.gif - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/48error.jpg - 80 - <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/styles/ReportingServices.css - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:30:54 <Edited: Server IP> GET /Reports/images/48error.jpg - 80 DomainUserName <Edited: Server IP> Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 200 0 0
2008-05-12 20:31:07 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:31:07 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 1 0
2008-05-12 20:31:13 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 2 2148074254
2008-05-12 20:31:13 127.0.0.1 GET /reports/ - 80 - 127.0.0.1 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.2;+.NET+CLR+1.1.4322;+.NET+CLR+2.0.50727) 401 1 0
I tried to highlight one of each of the HTTP errors I am getting. 401.2 and 401.1 are the ones I kind of expected, but have no idea why I'm getting them. The 500 0 error is a bit troubling, because unless I'm mistaken thats a server side error.
Here's my current setup. As far as I can tell, I've done everything to set up correctly for Windows Integerated security.
My Specs
The server machine running all SQL 2005 services. It resides in a domain. All Clients are in the same domain.
Intel Dual Processor 3.20 gig Xenon
Windows Server 2003 w/ SP2
Microsoft Sql Server 2005 w/ SP2
Reporting Services Setup
The virtual directories Reports and ReportServer are set to Windows Integrated Security with Anonymous Access disabled. All other checkboxes in Directory Security are unchecked. For permissions in Reports, I have:
Administrators (servernameAdministrators) - Full Control
ASP.NET Machine Account - Modify, Read & Execute, List Folder Contents, Read, Write
Authenticated Users - Modify, Read & Execute, List Folder Contents, Read, Write
Creator Owner - No permissions
Domain Users - Read & Execute, List Folder Contents, Read
SQLServer2005ReportingServices]WebServiceUsers$... - Read & Execute, List Folder Contents, Read
SQLServer2005ReportServerUsers$... - Read & Execute, List Folder Contents, Read
SYSTEM - Full Control
Users (CompNameUsers) - Read & Execute, List Folder Contents, Read
In ReportServer I have the same permissions except Authenticated Users is absent.
At one point, I even added the account Everybody and gave it full control, and I still recieved a HTTP 401 error. Any help at what I might be missing would be a godsend.
Thanks.
View 1 Replies
View Related
Sep 26, 2004
I have a big SQL Stored Procedure which works with a cursor inside of it. During the procedure the data is inserted into a table and at the end is a SELECT statement from that table. The problem is that when i create a dataset with that stored procedure and i run it in the Data tab i get the correct select, but in the Fields section of the Report I don't get the fields from the last SELECT, but the fields from the cursor. Am I doing something wrong or is this a bug and how can i fix it.
Thanks!
View 3 Replies
View Related
May 14, 2008
Hello,
I'm having some problems and I wonder if anyone can help me.
I need to call a stored procedure to retrieve some data from the bank and use it in a report.
I'm using oracle DB, but I'm not using ODBC, I'm using Oracle.
I can call the SP using 2 commands:
1- in the dataset data form, I can select the command type as Stored Procedure and write the name of my procedure without the arguments, and then the VS ask for the arguments
2- in the same form, the command type as TEXT, i can use the syntax: call <SP name>(arguments)
My problems are:
-in the first way, how can I programatically set the arguments to send?
-in both of them, how can I define that the data that should be stored in the dataset is in the out cursor parameter?
Thank you,
Oscar
View 2 Replies
View Related
Mar 10, 2008
I have created stored procedure.How can i use it insted of writing Sql Statement in Report Design.
Pls Help me.
Regards.
View 1 Replies
View Related
Jan 26, 2007
Hi all,
I have stored procedures that will run fine from query analyzer windows, from other programs, etc. When I try to run the sp from vs 2005 form with in a SSRS project, the sp just hangs. It will not return any records and the app says "Not Responding. This does not happen for all SP's only some of them. Any ideas?
View 8 Replies
View Related
Jul 6, 2015
I created a data set using SP. in ssms SP gets all records but in ssrs i am not able to get all records, getting only 5 row.
View 4 Replies
View Related
Dec 19, 2007
Hi,
I am working with one example on SQL Server 2005 Reporting Services. I have a stored procedure with two parameters. I want to call this stored procedure from SQL Server Reporting Services 2005.
CREATE PROCEDURE spEmp
(
@id int,
@name varchar(150)
)
AS
BEGIN
SELECT EmpId, EmpName, EmpSal FROM Emp WHERE EmpId = @id AND EmpName = @name
END
I want to pass
@id AND @name
parameters from reporting services form. Can you please give me link / article / steps to follow this in SQL SERVER REPORTING SERVICES 2005 ?
Thanks
Rajesh.
View 12 Replies
View Related
Oct 21, 2015
Created a report with parameters that can have multiple values.
Ran Stored procedure with same above criteria and data is retrieved
Ran the report and no data is displayed
I am unable to figure out where it might have gone wrong.
View 3 Replies
View Related
Jun 27, 2007
Hello,
I have a report. I need to make a drop-down parameter optional. I've setup the parameter to use a dataset as its source, and I need to allow the value to be null. I've selected allow nulls check box, and I've even tried setting the default value to System.DBNull.Value. But, when the entry is not selected (blank), no data ever comes back. If the data is blank or null, my procedure works (I've tested it). How do I send a null value to the database through reporting services report? I was hoping to avoid creating a special query just for that purpose.
Thanks.
View 15 Replies
View Related
May 2, 2006
I am trying to call oracle stored procedure from SRSS 2005. I am using the syntax { Call s_test_rcur()} . I am getting following error.An error occurred while retrieving the parameters in the query.ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1
ORA-00911: invalid characterORA-06512: at "SYS.DBMS_UTILITY", line 68ORA-06512: at line 1Â (System.Data.OracleClient)
Here is the Oracel stored proc.
TYPE rc_test IS REF CURSOR;
PROCEDURE s_test_rcur (po_test_rc OUT rc_test, -- returns a record setpo_error OUT INTEGER)ISBEGIN g_err_level := 1;OPEN po_test_rc FORSELECT a.ssn_id,TO_CHAR (a.acad_yr) || TO_CHAR (a.acad_yr + 1) acad_yr,RPAD (NVL (last_name, ' '), 30, ' ') last_name,RPAD (NVL (first_name, ' '), 30, ' ') first_name,NVL (middle_initial, ' ') middle_initialfrom test_tableorder by last_name;po_error := 0;EXCEPTIONWHEN OTHERSTHENpo_error := -1;g_error_code := SQLCODE;g_error_msg :='Err level :' ||TO_CHAR (g_err_level) ||' ' ||SUBSTR (SQLERRM, 1, 250);END;
View 2 Replies
View Related