Hi,all,
When I use following sql, an error occurs:
insert into #tmprep
EXECUTE proc_stat @start,@end
There is a "select * from #tmp " in stored procedure proc_stat, and the
error message is :
Server: Msg 8164, Level 16, State 1, Procedure proc_stat, Line 42
An INSERT EXEC statement cannot be nested.
What's the metter? Any help is greatly appreciated. Thanks
HI,
WELL WE HAVE BEEN TRYING TO AUTOMATE A PROCEDURE OUT HERE,AND WE ARE TRYING TO CONVERT MOST OF THE THINGS INTO PROCEDURES.
BUT WE ARE GETTING A FEW HICCUPS. PLS HELP
THIS IS HOW IT GOES :-
CREATE PROCEDURE MY_PROC1
AS
BEGIN
ST1 .........;
ST2..........;
END
CREATE PROCEDURE MY_PROC2
AS
BEGIN
CREATE TABLE #TMP2
(COL1 DATATYPE
COL2 DATATYPE)
INSERT INTO #TMP2
EXEC MY_PROC1
ST1 .........;
ST2..........;
END
THIS PROCEDURE TOO RUNS WELL ,AFTER TAKING THE DATA FROM THE FIRST PROC IT MANIPUATES THE DATA ACCORDING TO THE CRITERIA SPECIFIED
NO PROBLEM TILL NOW.......
BUT,
CREATE PROCEDURE MY_PROC3
AS
BEGIN
CREATE TABLE #TMP3
(COL1 DATATYPE
COL2 DATATYPE)
INSERT INTO #TMP3
EXEC MY_PROC2
ST1 .........;
ST2..........;
END
THEN IT GIVES AN ERROR AS :-
"An INSERT EXEC statement cannot be nested."
CAN'T WE , FROM A PROCEDURE CALL A PROCEDURE WHICH CALLS A PROCEDURE........
WHAT IS THE NESTING LEVEL OF A PROCEDURE ?
IS THERE ANY WAY AROUND IT OR CAN IT BE DONE BY CHANGING SOME SETTINGS ?
PLS HELP ME OUT IN THIS
THANKS
I try to select a store procedure in SqlExpress2005 which inside store procedure execute another store procedure,
When I select it but it prompt error messages "An INSERT EXEC statement cannot be nested.".
In Fire bird /Interbase store procedure we can nested. Below are the code;
declare @dtReturnData Table(doccode nvarchar(20), docdate datetime, debtoraccount nvarchar(20))
Insert Into @dtReturnData
Exec GetPickingList 'DO', 0, 37256, 'N', 'N', 'YES'
Select doccode, docdate, debtoraccount
From @dtReturnData
Inside the GetPickList It will do like this, but most of the code I not included;
ALTER PROCEDURE GETPICKINGLIST
@doctype nvarchar(2),
@datefrom datetime,
@dateto datetime,
@includegrn char(1),
@includesa char(1),
@includedata nvarchar(5)
AS
BEGIN
declare @dtReturnData Table(doccode nvarchar(20),
docdate datetime,
debtoraccount nvarchar(20))
IF (@DOCTYPE = 'SI')
BEGIN
Insert Into @dtSALESINVOICEREGISTER
Exec SALESINVOICEREGISTER @DateFrom, @DateTo, @IncludeGRN, @IncludeSA, @IncludeData
END
ELSE
BEGIN
Insert Into @dtDELIVERYORDERREGISTER
Exec DELIVERYORDERREGISTER @DateFrom, @DateTo, @IncludeGRN, @IncludeSA, @IncludeData
END
Select doccode,docdate,debtoraccount From @dtReturnData
END
So how can I select a nested store procedure? can someone help me
i have a 3 or 4 cursors, and in the inner cursor i am inserting into a table from a sproc. i keep getting the error
An INSERT EXEC statement cannot be nested.
heres the actual insert code:
set @SQLString = 'EXEC ScoresGetlines '+cast(@customerID as char(10))+',' + cast(@programId as char(10))+',' + '"'+ @period +'",NULL,NULL,0'
INSERT INTO reportData
exec (@sqlString)
ive tried just a simple :
insert into reportdata
exec scoreGetLines @customerId,@programID...........
that still doesnt work. same error. how can this be sorted
I am using the following statement in a SP.
EXECUTE (' INSERT INTO #OutPut
EXEC h_DailyDividend
@TickerTable = '+@TickerTableName+',
@DateTable = '+@DateTableName+',
@Units = '+@Units
)
AND IN h_DailyDividend I am using the following statement.
EXECUTE (' INSERT INTO #TickerTable
EXEC h_SecMstr_SecMap_TQAExch_Info
@IDList = '+@TickerTable+',
@IsTable = 1,
@Type = 0,
@OutPutFormat = 0,
@VenType = 14 ')
And i am getting the following error.
Message: An INSERT EXEC statement cannot be nested.
Can any body help me out how to solve this problem.
Regards
Sulaman
Hello,I want to share my experiences about using insert into exec which mayhelp others .Using SQL Server 2000, SP3 .Two Proceduers - Parent SP caliing a Child SP (nested ) . No Explicittransactions .I have defined a # table in Parent SP and calling a Child SP like thisinsert into #temp exec childsp ......Child SP has Select * from local # temp table ( local to child SP) as the last statement .When number of records are less ( around 1000 - 5000) Parent SPexecutes but slow .When the Child SP returns higher number of rows ( 1,00,000 or more )the SP will be running for hours with out completion .Although executing the child SP , with exec ChildSP .... with sameparameters it is completed in 2 mins for 3,00,000 rows .Resolution : - Define a temp table (say #tempChild ) in the Parent SP..In the Child SP instead of select * replace with insert into#tempChild select * from ...Also note that this problem is not noticed in SQL 2000 Server with SP4..This may be due to SP executing in implicit transactions .
View 1 Replies View RelatedHi All,
I am having a problem with nested insert exec. Say for example I have three stored procedure procA, procB and procC.
I am executing procedure procC in procB; I am storing the values returned by procC in a tempTable. The code is
INSERT INTO #Temp
EXEC procC
And in procA, I am executing procB, and the values returned by procB are stored in another temp table. The code is
INSERT INTO #TempOne
EXEC procC
When I execute the procA, I am getting error as
An INSERT EXEC statement cannot be nested.
My requirement is like this, please give me a solution.
Thanks
Greeting.
I use OdbcConnection inside clr procedure, for getting data. If I use simple EXEC dbo.clr_proc - all is OK. If I use INSERT...EXEC I recive error message: Distributed transaction enlistment failed.
I set MSDTC security options for No Authentification and Allow inbound and Allow outbound, but it's no use.
Have this problem solution? May be, I must use another method to get my data?
P.S. Linked Servers and OPENQUERY is not applicable. Sybase not describe columns in stored proc result set and one stored proc may return different result set by params.
P.S.S. Sorry for bad english.
Hi Guys, I have been trying to get this SQL string below to run, but for some reason I carry on getting an error near the EXEC Statements.
Does anyone have any idea what I doing wrong?
CREATE PROCEDURE [dbo].[UpdateWarnings]
@EndDate DateTime
AS
DECLARE @iid varchar(100)
DECLARE @fid varchar(100)
SET @iid = EXEC('SELECT id FROM memorial WHERE warnings >= 3 AND expires <= getdate()')
IF @iid <> ''
BEGIN
EXEC('UPDATE memorial SET active=0 WHERE id IN ('+ @iid +')')
END
SET @fid = EXEC('SELECT id FROM memorial WHERE warnings < 3 AND expires <= getdate()')
IF @fid <> ''
BEGIN
EXEC('UPDATE memorial SET warning=(warning+1) WHERE id IN ('+ @fid + ')')
END
IF @enddate <> ''
BEGIN
UPDATE warnings SET startdate=getdate(), enddate=@enddate, warnings=(warnings + 1) WHERE id=1
END
GO
Hi,
I have written a stored proc to bulk insert the data from a data file.
I have a requirement that i need to insert the data into a table of which the name is not known. I mean to say that the table name will be passed as a parameter to the stored proc. And also i need to insert the date that will also be passed as the parameter to the stored proc
The follwing statement works fine if i give the table name directly in the query
Code Snippet
DECLARE @LastUpdate varchar(20)
SET @LastUpdate = 'Dec 11 2007 1:20AM'
INSERT INTO Category
SELECT MSISDN, @LastUpdate FROM OPENROWSET( BULK '\remotemachinedatafile.txt',
FORMATFILE = '\remotemachineFormatFile.fmt',
FIRSTROW = 2) AS a
To satisfy my requirement ( i.e passing the table name dynamically , and the date) , i have formed the query string ( exact one as above ) and passing it to EXEC statement. But its failing as explained below
Code Snippet
@Category - Will be passed as a parameter to the stored proc
DECLARE @vsBulkSQL VARCHAR(MAX)
DECLARE @LastUpdate varchar(20)
SET @LastUpdate = 'Dec 11 2007 1:20AM'
SELECT @vsBulkSQL ='INSERT INTO '+ @Category + ' SELECT MSISDN, ''' + @LastUpdate +''' FROM OPENROWSET ' + '( BULK ' + '''' + '\remotemachinedatafile.txt'+ ''''+ ' ,' +
+ ' FORMATFILE ' + '=' + ''''+ '\remotemachineFormatFile.fmt'+ ''''+ ',' +
' FIRSTROW ' + '=' + '2' + ')' + ' AS a'
Print @vsBulkSQL - This prints the folliwing statement
INSERT INTO Category SELECT MSISDN, 'Dec 11 2007 1:20AM' FROM OPENROWSET ( BULK '\remotemachineDataFile.txt' , FORMATFILE ='\remotemachineFormatFile.fmt', FIRSTROW =2) AS a
Exec @vsBulkSQL - This statement gives the following error
The name 'INSERT INTO Sports SELECT MSISDN, 'Dec 11 2007 1:20AM' FROM OPENROWSET ( BULK '\remotemachineSecond.txt' , FORMATFILE ='\remotemachineFormatFile.fmt', FIRSTROW =2) AS a' is not a valid identifier.
Can any one please point out where am i doing wrong? Or do i need to do anything else to achive the same
~Mohan
I am running the DMX below and I am getting an error we I go to train my structure. It is probably something stupid but I do not see the problem. It seems like the SKIP isn't being recognized but I am not sure. Here is the error:
INSERT INTO error: The '[MSA].[HospitalID]' nested table key column is not bound to an input rowset column.
DMX:
CREATE MINING STRUCTURE [Hospital_Structure] (
[HospitalID] LONG KEY,
[SponsorshipTypeID] LONG DISCRETE,
[GeographicTypeID] LONG DISCRETE,
[CaseMixIndex] DOUBLE CONTINUOUS,
[PercentGovtPayers] DOUBLE CONTINUOUS,
[TotalNumberInpatientCases] LONG CONTINUOUS,
[MSA] TABLE (
[HospitalID] LONG KEY,
[MSAGroupMember] TEXT DISCRETE
)
);
GO
ALTER MINING STRUCTURE [Hospital_Structure]
ADD MINING MODEL [Hospital_Model] (
[HospitalID],
[SponsorshipTypeID],
[GeographicTypeID],
[CaseMixIndex],
[PercentGovtPayers],
[TotalNumberInpatientCases],
[MSA] (
[HospitalID],
[MSAGroupMember]
)
) USING Microsoft_Clustering;
GO
INSERT INTO MINING STRUCTURE [Hospital_Structure]
(
[HospitalID],
[SponsorshipTypeID],
[GeographicTypeID],
[CaseMixIndex],
[PercentGovtPayers],
[TotalNumberInpatientCases],
[MSA] (SKIP, [MSAGroupMember])
)
SHAPE {
OPENQUERY([localhost],'
SELECT
[HospitalID],
[SponsorshipTypeID],
[GeographicTypeID],
[CaseMixIndex],
[PercentGovtPayers],
[TotalNumberInpatientCases]
FROM
[dm].[vw_HospitalClustering_Inputs]
ORDER BY
[HospitalID]') }
APPEND
(
{OPENQUERY([localhost],'
SELECT
[HospitalID],
[MSAGroupMember]
FROM
[dm].[vw_HospitalClustering_InputsNested]
ORDER BY
[HospitalID],
[MSAGroupMember]')
}
RELATE [HospitalID] TO [HospitalID]
) AS [MSA]
Thanks in advance
Following is the stored procedure iam trying to create.Here i am trying to
First create a table with the table name passed as parameter
Second I am executing a dynamic sql statement ("SELECT @sql= 'Select * from table") that returns some rows.
Third I want to save the rows returned by the dynamic sql statement ("SELECT @sql= 'Select * from table") in the tablei created above.All the columns and datatypes are matching.
This table would be further used with cursor.
Now i am getting a syntax error on the last line.Though i doubt whether the last 3 lines will execute properly.Infact how to execute a sp_executesql procedure in another dynamic sql statement.ANy suggestions will be appreciated.
CREATE PROCEDURE [dbo].[sp_try]
@TempTable varchar(25)
AS
DECLARE @SQL nvarchar(MAX)
DECLARE @SQLINSERT nvarchar(MAX)
BEGIN
--create temp table
SELECT @Sql= N'CREATE TABLE ' + QUOTENAME(@TempTable) +
'(
ContactName varchar (40) NOT NULL ,
ContactId varchar (30) NOT NULL ,
ContactrMessage varchar (100) NOT NULL,
)'
EXEC sp_executesql @Sql, N'@TempTable varchar(25)', @TempTable = @TempTable
SELECT @sql= 'Select * from table'
SELECT @sqlinsert = 'INSERT INTO ' + quotename( @TempTable )
SELECT @sqlinsert = @sqlinsert + EXEC sp_executesql @sql, N'@Condition varchar(max)', @Condition=@Condition
EXEC sp_executesql @SQLINSERT, N'@TempTable varchar(25)', @TempTable = @TempTable
Hello
I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake...
Here's the sql management studio diagram :
and here goes the code1 DataSet ds = new DataSet();
2
3 SqlDataAdapter myCommand1 = new SqlDataAdapter("select * from SurveyTemplate", myConnection);
4 SqlCommandBuilder cb = new SqlCommandBuilder(myCommand1);
5 myCommand1.FillSchema(ds, SchemaType.Source);
6 DataTable pTable = ds.Tables["Table"];
7 pTable.TableName = "SurveyTemplate";
8 myCommand1.InsertCommand = cb.GetInsertCommand();
9 myCommand1.InsertCommand.Connection = myConnection;
10
11 SqlDataAdapter myCommand2 = new SqlDataAdapter("select * from Question", myConnection);
12 cb = new SqlCommandBuilder(myCommand2);
13 myCommand2.FillSchema(ds, SchemaType.Source);
14 pTable = ds.Tables["Table"];
15 pTable.TableName = "Question";
16 myCommand2.InsertCommand = cb.GetInsertCommand();
17 myCommand2.InsertCommand.Connection = myConnection;
18
19 SqlDataAdapter myCommand3 = new SqlDataAdapter("select * from Possible_Answer", myConnection);
20 cb = new SqlCommandBuilder(myCommand3);
21 myCommand3.FillSchema(ds, SchemaType.Source);
22 pTable = ds.Tables["Table"];
23 pTable.TableName = "Possible_Answer";
24 myCommand3.InsertCommand = cb.GetInsertCommand();
25 myCommand3.InsertCommand.Connection = myConnection;
26
27 ds.Relations.Add(new DataRelation("FK_Question_SurveyTemplate", ds.Tables["SurveyTemplate"].Columns["id"], ds.Tables["Question"].Columns["surveyTemplateID"]));
28 ds.Relations.Add(new DataRelation("FK_Possible_Answer_Question", ds.Tables["Question"].Columns["id"], ds.Tables["Possible_Answer"].Columns["questionID"]));
29
30 DataRow dr = ds.Tables["SurveyTemplate"].NewRow();
31 dr["name"] = o[0];
32 dr["description"] = o[1];
33 dr["active"] = 1;
34 ds.Tables["SurveyTemplate"].Rows.Add(dr);
35
36 DataRow dr1 = ds.Tables["Question"].NewRow();
37 dr1["questionIndex"] = 1;
38 dr1["questionContent"] = "q1";
39 dr1.SetParentRow(dr);
40 ds.Tables["Question"].Rows.Add(dr1);
41
42 DataRow dr2 = ds.Tables["Possible_Answer"].NewRow();
43 dr2["answerIndex"] = 1;
44 dr2["answerContent"] = "a11";
45 dr2.SetParentRow(dr1);
46 ds.Tables["Possible_Answer"].Rows.Add(dr2);
47
48 dr1 = ds.Tables["Question"].NewRow();
49 dr1["questionIndex"] = 2;
50 dr1["questionContent"] = "q2";
51 dr1.SetParentRow(dr);
52 ds.Tables["Question"].Rows.Add(dr1);
53
54 dr2 = ds.Tables["Possible_Answer"].NewRow();
55 dr2["answerIndex"] = 1;
56 dr2["answerContent"] = "a21";
57 dr2.SetParentRow(dr1);
58 ds.Tables["Possible_Answer"].Rows.Add(dr2);
59
60 dr2 = ds.Tables["Possible_Answer"].NewRow();
61 dr2["answerIndex"] = 2;
62 dr2["answerContent"] = "a22";
63 dr2.SetParentRow(dr1);
64 ds.Tables["Possible_Answer"].Rows.Add(dr2);
65
66 myCommand1.Update(ds,"SurveyTemplate");
67 myCommand2.Update(ds, "Question");
68 myCommand3.Update(ds, "Possible_Answer");
69 ds.AcceptChanges();
70
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint
"FK_Question_SurveyTemplate". The conflict occurred in database
"ankietyzacja", table "dbo.SurveyTemplate", column
'id'.
The statement has been terminated.
at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ?
Thanks a lot.
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
Hi All,
I am trying to run an insert statement and getting an error.
Insert statement:
insert into conv_owner (name,street_num,
street_direction,street_name,street_type,street_un it,
address2,city,state,city_state,zip,wphone,inservic e,
db_name,table_name)
select "Facility's Owner",null,null,null,null,null,null,null,
null,null,null,"Owner's Telephone Number",inservice,
'BKFoodProtection.mdb','FP_Master'
from fp_master
Error message:
Server: Msg 8114, Level 16, State 5, Line 1
Error converting data type varchar to numeric.
Any idea why? Thanks.
Hi
All as i have a class where i wrote a procedure for insert statement and i passed the value from the form and previously it was fine and now its giving the following error
" The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
And
code is as follows
Code Snippet
Public Sub Purchase_Header(ByVal BillNo As VariantType, ByVal BillDate As Date, ByVal GRNNO As VariantType, ByVal GRNdate As Date, ByVal TOP As Integer, ByVal Supplier As Integer, ByVal TotalPurchasevalue As Double, ByVal TotalProductValue As Double, ByVal BillPaid As Date, ByVal BillDue As Date, ByVal NoOfSBills As Integer, ByVal noofbreceived As Integer, ByVal billstatus As Integer, ByVal paymentstatus As Integer, ByVal appstatus As Integer, ByVal recitstatus As Boolean, ByVal sbillstatus As Boolean, ByVal ccindicator As String)
connection()
myCommand = New SqlCommand("INSERT INTO Purchase_Header(PH_Voucher_Date,PH_Bill_No,PH_Bill_Date,PH_GRN_No,PH_GRN_Date,PH_Type_Of_Purchase_Id,PH_Supplier_Id,PH_Total_Purchase_Value,PH_Total_Product_Value,PH_Bill_Paid_On,PH_Bill_Due_On,PH_No_Of_Sub_Bills,PH_No_Of_Sub_Bills_Received,PH_Bill_Status,PH_Payment_Status,PH_Apportionment_Status,PH_Goods_Receipt_Status,PH_Sub_Bill_Receipt_Status,PH_Cash_Credit_Indicator,PH_Total_Tax_Paid) VALUES('" & System.DateTime.Today & "'," & BillNo & ",'" & BillDate & "'," & GRNNO & ",'" & GRNdate & "'," & TOP & "," & Supplier & "," & TotalPurchasevalue & "," & TotalProductValue & ",'" & BillPaid & "','" & BillDue & "'," & NoOfSBills & "," & noofbreceived & "," & billstatus & "," & paymentstatus & "," & appstatus & ",'" & recitstatus & "','" & sbillstatus & "' ,'" & ccindicator & "',0)", myConnection)
myCommand.ExecuteReader()
MsgBox("Data saved successfully")
myConnection.Close()
and table structure is as follows and for date types i am passing them through date variables from textbox
INSERT INTO [MoneyBee].[dbo].[Purchase_Header]
([PH_Voucher_Date]
,[PH_Bill_No]
,[PH_Bill_Date]
,[PH_GRN_No]
,[PH_GRN_Date]
,[PH_Type_Of_Purchase_Id]
,[PH_Supplier_Id]
,[PH_Total_Purchase_Value]
,[PH_Total_Product_Value]
,[PH_Bill_Paid_On]
,[PH_Bill_Due_On]
,[PH_No_Of_Sub_Bills]
,[PH_No_Of_Sub_Bills_Received]
,[PH_Bill_Status]
,[PH_Payment_Status]
,[PH_Apportionment_Status]
,[PH_Goods_Receipt_Status]
,[PH_Sub_Bill_Receipt_Status]
,[PH_Cash_Credit_Indicator]
,[PH_Total_Tax_Paid])
VALUES
(<PH_Voucher_Date, datetime,>
,<PH_Bill_No, varchar(15),>
,<PH_Bill_Date, datetime,>
,<PH_GRN_No, numeric,>
,<PH_GRN_Date, datetime,>
,<PH_Type_Of_Purchase_Id, numeric,>
,<PH_Supplier_Id, numeric,>
,<PH_Total_Purchase_Value, numeric,>
,<PH_Total_Product_Value, numeric,>
,<PH_Bill_Paid_On, datetime,>
,<PH_Bill_Due_On, datetime,>
,<PH_No_Of_Sub_Bills, numeric,>
,<PH_No_Of_Sub_Bills_Received, numeric,>
,<PH_Bill_Status, numeric,>
,<PH_Payment_Status, numeric,>
,<PH_Apportionment_Status, numeric,>
,<PH_Goods_Receipt_Status, bit,>
,<PH_Sub_Bill_Receipt_Status, bit,>
,<PH_Cash_Credit_Indicator, varchar(6),>
,<PH_Total_Tax_Paid, numeric,>)
Thanks
Avinash
hi
i'm having a problem with my project we need to make for school with asp.net & c#. the problem is i'm a newbie with c#.
the project we need to make is a survey. so the problem is my first question of the survey works fine when i push the go to next it enters the data nice into my sql db and my second question loads, then I enter the answer for my second question i press go to next question and i get this error: " The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Antwoorden_Gebruikers". The conflict occurred in database "GIP_enquete", table "dbo.Gebruikers", column 'Gebruiker_ID'. " I don't know how i can fix this cause im to newbie to understand whats wrong.
here is a view of my code:
Code Snippet
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using enqueteTableAdapters;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
int Vraag_ID = Convert.ToInt16(Request.QueryString["vraagid"]);
VragenTableAdapter VraagAdapter = new VragenTableAdapter();
lblVraag.Text = Convert.ToString(VraagAdapter.GeefVraag(Vraag_ID));
if (Vraag_ID == 1)
{
pnlVraag1.Visible = true;
}
if (Vraag_ID == 2)
{
pnlVraag2.Visible = true;
}
}
protected void btnVraag1_Click(object sender, EventArgs e)
{
//make a new user
GebruikersTableAdapter GebruikerAdapter = new GebruikersTableAdapter();
DateTime Moment = System.DateTime.Now;
GebruikerAdapter.GebruikerToevoegen(Moment);
int GebruikerID = Convert.ToInt16(GebruikerAdapter.GeefGebruikerID(Moment));
this.ViewState.Add("gebruiker_id", GebruikerID);
//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(1, GebruikerID, txtVraag1.Text, null);
//go to 2nd question
Response.Redirect("Default.aspx?vraagid=2", true);
}
protected void btnVraag2_Click(object sender, EventArgs e)
{
//get back the user from question 1
int GebruikerID = Convert.ToInt16(this.ViewState["gebruiker_id"]);
//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(2, GebruikerID, txtVraag2.Text, null);
when i run debug it allways stops here
//go too 3th question
Response.Redirect("Default.aspx?vraagid=3", true);
}
}
can somebody plz help me ? =(
ps: sorry for my bad english
Ok, the following four lines are four lines of code that I'm running, I'll post the code and then explain my issue:
sqlCommand = New SQLCommand("INSERT INTO Bulk (Bulk_Run, Bulk_Totes, Bulk_Drums, Bulk_Boxes, Bulk_Bags, Bulk_Bins, Bulk_Crates) VALUES (" & RunList(x,0) & ", " & Totes & ", " & Drums & ", " & Boxes & ", " & Bags & ", " & Bins & ", " & Crates & ")", Connection) sqlCommand.ExecuteNonQuery() sqlCommand = New SQLCommand("INSERT INTO Presort (Presort_Run, Presort_Totes, Presort_Drums, Presort_Boxes, Presort_Bags, Presort_Bins, Presort_Crates) VALUES (" & RunList(x,0) & ", " & Totes & ", " & Drums & ", " & Boxes & ", " & Bags & ", " & Bins & ", " & Crates & ")", Connection) sqlCommand.ExecuteNonQuery()
The two tables (Bulk & Presort) are <b>exactly</b> the same. This includes columns, primary keys, IDs, and even permissions. If I run the last two liens (the INSERT INTO Presort) then it works fine without error. But whenever I run the first two lines (the INSERT INTO Bulk) I get the following error:
Incorrect syntax near the keyword 'Bulk'.
Anyone have any ideas, thanks
I am receiving the following error when trying to insert values from textboxes on a registration form:
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30205: End of statement expected.
Source Error:
Line 19: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Line 20:
Line 21: Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Line 22: Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
Line 23: dbCommand.CommandText = queryString
My code is below. Can anyone help me figure out what is wrong with my code?
<%@ Page Language="VB" Debug="true" %>
<%@ Register TagPrefix="wmx" Namespace="Microsoft.Matrix.Framework.Web.UI" Assembly="Microsoft.Matrix.Framework, Version=0.6.0.0, Culture=neutral, PublicKeyToken=6f763c9966660626" %>
<%@ import Namespace="System.Data" %>
<%@ import Namespace="System.Data.OleDb" %>
<script runat="server">
Sub btnSubmit_Click(sender As Object, e As EventArgs)
Dim UCde as string = txtUserID.Text
Dim UserID as string = txtUserID.Text
Dim Password as string = txtPassword.Text
Dim Email1 as string = txtEmail.Text
Dim FirstName as string = txtFirstName.Text
Dim LastName as string = txtLastName.Text
Dim AdminLevel as string = dropAccountType.SelectedItem.Value
Dim connectionString As String = "server='(local)'; trusted_connection=true; database='master'"
Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "INSERT INTO [UserID_db] ([Code], [UserID], [Password], [Email1], [Name_First], [Name_Last], [Admin_level]) VALUES ('" & txtUserID.Text"', '" & txtUserID.Text"', '" & txtPassword.Text"', '" & txtEmail1.Text"', '" & txtFirstName"', '" & txtLastName.Text"', '" & txtAdminLevel.Text"')"
Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand
dbCommand.CommandText = queryString
dbCommand.Connection = dbConnection
Dim rowsAffected As Integer = 0
dbConnection.Open()
dbCommand.ExecuteNonQuery()
dbConnection.Close()
End Sub
Thanks for your help.
Chris
Here is my insert statement: StringBuilder sb = new StringBuilder(); sb.Append("INSERT INTO patients_import_test "); sb.Append("(Referral_Number,Referral_Date,FullName,Patient_ien,DOB,FMP,SSN_LastFour,Race_Id,PCM,Age) "); sb.Append("VALUES(@rnum,@rdate,@fname,@patid,@birthDate,@fmp,@ssan,@race,@pcm,@age) "); sb.Append("WHERE Referral_Number NOT IN ( SELECT Referral_Number FROM patients_import_test )");I'm getting an "Incorrect syntax near the keyword 'WHERE'".If I remove the WHERE clause the INSERT statement work fine.
View 3 Replies View RelatedUsing Access 2010 and SQL Server 2012..i added a database through SSMS and added a table named tblEmployee (dbo.tblEmployee)
The table has 3 fields
LName (nvarchar(50), null)
FName (nvarchar(50), null)
Code (nvarchar(50), null)
The access table has 3 fields
FName, text
LName, text
Code, text
I found a code snippet here to insert from the Access table to the SQL table.UtterAccess Discussion Forums > Appending Access table to SQL Server table (and vice-versa) usin...The code is generating this error
Run-time error '3134':
Syntax error in INSERT INTO statement
Code:
Option Compare Database
Sub AppToSQL()
Dim strODBCConnect As String
Dim strSQL As String
'Code from:
[code]...
Hi,
I have a problem as shown below
Server Error in '/ys(Do Not Remove!!!)' Application.
Syntax error in INSERT INTO statement.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: Syntax error in INSERT INTO statement.
Source Error:
Line 8: <Script runat="server">
Line 9: Private Sub InsertAuthorized(ByVal Source As Object, ByVal e As EventArgs)
Line 10: SqlDataSource1.Insert()
Line 11: End Sub ' InsertAuthorized
Line 12: </Script>
Source File: C:Documents and SettingsDream_AchieverDesktopys(Do Not Remove!!!)Authorizing.aspx Line: 10
Stack Trace:
[OleDbException (0x80040e14): Syntax error in INSERT INTO statement.]
System.Data.OleDb.OleDbCommand.ExecuteCommandTextForSingleResult(tagDBPARAMS dbParams, Object& executeResult) +177
System.Data.OleDb.OleDbCommand.ExecuteCommandText(Object& executeResult) +194
System.Data.OleDb.OleDbCommand.ExecuteCommand(CommandBehavior behavior, Object& executeResult) +56
System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) +105
System.Data.OleDb.OleDbCommand.ExecuteNonQuery() +88
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +392
System.Web.UI.WebControls.SqlDataSourceView.ExecuteInsert(IDictionary values) +410
System.Web.UI.WebControls.SqlDataSource.Insert() +13
ASP.authorizing_aspx.InsertAuthorized(Object Source, EventArgs e) in C:Documents and SettingsDream_AchieverDesktopys(Do Not Remove!!!)Authorizing.aspx:10
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +75
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +97
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4919
And part of my program is as shown
<Script runat="server">
Private Sub InsertAuthorized(ByVal Source As Object, ByVal e As EventArgs)
SqlDataSource1.Insert()
End Sub ' InsertAuthorized
</Script>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DIP1ConnectionString %>" ProviderName="<%$ ConnectionStrings:DIP1ConnectionString.ProviderName %>"
InsertCommand="Insert Into Authorize (Army ID,Tag No,Vehicle ID,Vehicle Type,Prescribed Route,Start Time, End Time) VALUES (@ArmyID, @TagNo, @VehicleID, @VehicleType, @PrescribedRoute, @StartTime, @EndTime)">
<insertparameters>
<asp:formparameter name="ArmyID" formfield="ArmyID" />
<asp:formparameter name="TagNo" formfield="TagNo" />
<asp:formparameter name="VehicleID" formfield="VehicleID" />
<asp:formparameter name="VehicleType" formfield="VehicleType" />
<asp:formparameter name="PrescribedRoute" formfield="PrescribedRoute" />
<asp:formparameter name="StartTime" formfield="StartTime" />
<asp:formparameter name="EndTime" formfield="EndTime" />
</insertparameters>
</asp:SqlDataSource>
Anybody can help? thanks
Public DBString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Q:VoicenetRTS FolderRTS ChargesAccountscosting.mdb"
Private Sub Button13_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button13.Click
Dim connstring As New OleDbConnection(DBString)
connstring.Open()
Dim searchstring As String = "SELECT * FROM Costings1"
Dim da As New OleDbDataAdapter(searchstring, connstring)
Dim DS As New DataSet()
Dim dt As DataTable = DS.Tables("Costings1")
da.FillSchema(DS, SchemaType.Source, "Costings1")
da.Fill(DS, "Costings1")
Dim cb As New OleDbCommandBuilder(da)
da.InsertCommand = cb.GetInsertCommand
da.UpdateCommand = cb.GetUpdateCommand
Dim dr As DataRow = DS.Tables("Costings1").NewRow
dr("Key") = TextBox1.Text
dr("CODE") = TextBox2.Text
dr("Element") = TextBox3.Text
etc...
DS.Tables("Costings1").Rows.Add(dr)
da.Update(DS, "Costings1") <<<<<<<<<<<Syntax error in INSERT INTO statement.
There are no spaces in the field names.
hi
i'm having a problem with my project we need to make for school with asp.net & c#. the problem is i'm a newbie with c#.
the project we need to make is a survey. so the problem is my first question of the survey works fine when i push the go to next it enters the data nice into my sql db and my second question loads, then I enter the answer for my second question i press go to next question and i get this error: " The INSERT statement conflicted with the FOREIGN KEY constraint "FK_Antwoorden_Gebruikers". The conflict occurred in database "GIP_enquete", table "dbo.Gebruikers", column 'Gebruiker_ID'. " I don't know how i can fix this cause im to newbie to understand whats wrong.
here is a view of my code:
Code Snippet
using System;
using System.Data;
using System.Configuration;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
using enqueteTableAdapters;
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
int Vraag_ID = Convert.ToInt16(Request.QueryString["vraagid"]);
VragenTableAdapter VraagAdapter = new VragenTableAdapter();
lblVraag.Text = Convert.ToString(VraagAdapter.GeefVraag(Vraag_ID));
if (Vraag_ID == 1)
{
pnlVraag1.Visible = true;
}
if (Vraag_ID == 2)
{
pnlVraag2.Visible = true;
}
}
protected void btnVraag1_Click(object sender, EventArgs e)
{
//make a new user
GebruikersTableAdapter GebruikerAdapter = new GebruikersTableAdapter();
DateTime Moment = System.DateTime.Now;
GebruikerAdapter.GebruikerToevoegen(Moment);
int GebruikerID = Convert.ToInt16(GebruikerAdapter.GeefGebruikerID(Moment));
this.ViewState.Add("gebruiker_id", GebruikerID);
//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(1, GebruikerID, txtVraag1.Text, null);
//go to 2nd question
Response.Redirect("Default.aspx?vraagid=2", true);
}
protected void btnVraag2_Click(object sender, EventArgs e)
{
//get back the user from question 1
int GebruikerID = Convert.ToInt16(this.ViewState["gebruiker_id"]);
//send answer
AntwoordenTableAdapter AntwoordAdapter = new AntwoordenTableAdapter();
AntwoordAdapter.AntwoordIngeven(2, GebruikerID, txtVraag2.Text, null);
when i run debug it allways stops here
//go too 3th question
Response.Redirect("Default.aspx?vraagid=3", true);
}
}
can somebody plz help me ? =(
ps: sorry for my bad english
When I run this query against PFGDSMRISSQLQ1 in Server manager 2005:use <database>INSERT INTO dbo.<table> (<column1>, <column2>, <column3>)VALUES (12598,2900,1.00)I get this error:Msg 8624, Level 16, State 1, Line 5Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services.Can someone please help. Thanks!
View 1 Replies View RelatedThe following SQL statement fails on SQL CE 3.5 but works on SQL Express 2005:
"INSERT INTO BOOKINGS VALUES(@now,'"+note+"'," + p + "); SELECT @@IDENTITY;"
Compact 3.5 doesnt like the SELECT statement claiming that:
There was an error parsing the query. [ Token line number = 1,Token line offset = 72,Token in error = SELECT ]
Can anyone suggest the correct SQL to implement this via Compact? i.e. How do I retrieve the Identity value during and insert statement?
I have removed the SELECT @@IDENTITY; portion of the statement and it runs fine.
I would like to execute something like that with sql6.5 :
select @cmd = 'use ' + quotename(@dbname) + ' exec sp_helprotect'
exec (cmd)
I tried like this but I don't know what's wrong
exec ("USE "+ RTRIM(@dbname) +"exec sp_helprotect")
Thank you
hi guys
maybe an easy one for you
in stored procedure I create follving select
@cmd = 'select ' + @column_name + 'from ticket_dump_datawarehouse '
execute (@cmd)
problem is thant I want to gave return value from this select
something like
set @return = execute(@cmd)
but I recieve error
Incorrect syntax near the keyword 'execute'
Can I do that some other way?
hi guys
maybe an easy one for you
in stored procedure I create follving select
@cmd = 'select ' + @column_name + 'from ticket_dump_datawarehouse '
execute (@cmd)
problem is thant I want to gave return value from this select
something like
set @return = execute(@cmd)
but I recieve error
Incorrect syntax near the keyword 'execute'
Can I do that some other way?
declare @rej_nm as varchar(50)
exec('select count(*), ' + "'@rej_nm'" + 'from ' + @rej_nm)
trying to return the rowcount AND the name of the object. return set should look like this:
12, tbl_name
i've tried single quotes around @rej_nm, nested single quotes, single/double nested, etc..
instead, i get an error stating that @rej_nm is not a valid column of tbl_name. bottomline...
how do i return a variable 'value' within a select statement...
thanks!
Hi, I am facing a problem here. I am trying to make a stored procedure which accepts an input. The input is a table name within the database. The procedure itself then will make an after update trigger for the table. The purpose of making this stored procedure is because the table keeps changing (columns can be added or deleted) and I don't want to make the trigger manually everytime the table changes, instead I want to execute the stored procedure by passing the table's name and the procedure will create the trigger for me. The problem is sql server 2005 has limited the length of any variable to 8000. The create trigger statement can be longer than that. So using a variable to store the create trigger statement and then executing that variable is not an option. That is why I have inserted the statement to be executed into a column in a temp table. Now how do I execute that statement? I have tried this:
EXEC(SELECT QRY FROM temp_Update)
Qry is the column name which holds the create trigger statement. temp_Update is the temporary table. But if I run it, it will give this error:
Msg 156, Level 15, State 1, Line 123Incorrect syntax near the keyword 'SELECT'.Msg 102, Level 15, State 1, Line 123Incorrect syntax near ')'.
Can anybody tell me how to execute a query which is place in a column in a table? If we can't do this, then what is the workaround, maybe how to have a variable that can hold more than 8000 characters? Any suggestion is greatly appreciate it. Thanks.
Hi everyone,
What is EXEC statement ?? What is the usage and purpose of it ??
It is really difficult to find ant resource about this keywords that's why I would like you to help me.
Thanks
Have run to a select permission error when attempting insert data to a table. received the following error
Msg 229, Level 14, State 5, Line 11
The SELECT permission was denied on the object 'tableName', database 'DBname', schema 'Schema'.
Few things to note
- There are no triggers depending on the table
- Permissions are granted at a roll level which is rolled down to the login
- The test environments have the same level of permission which works fine.