An Error Occurred During Recovery / Preventing Database From Restarting
Oct 13, 2015
We are running SQL Server 2014 Web Edition (64-bit). On three occasions now we have had two of our live secondary log shipping databases become unusable through the log shipping process. We ship logs to these databases every five minutes, and generally the process works fine. However, on three occasions in as many months we have suddenly received alerts warning us that the transaction log restores could not be performed on the secondary databases. The SQL Server Error Log revealed the following:
Date,Source,Severity,Message
10/13/2015 04:01:16,spid52,Unknown,Setting database option SINGLE_USER to ON for database 'ObfuscatedName'.
10/13/2015 04:01:17,spid52,Unknown,Starting up database 'ObfuscatedName'.
10/13/2015 04:01:17,spid52,Unknown,Recovery is writing a checkpoint in database 'ObfuscatedName' (8). This is an informational message only.
[code].....
An error occurred during recovery, preventing the database 'ObfuscatedName' (8:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support."
The extract above shows two previously successful restores to the secondary database. Suddenly, at 04:11:16, the database can no longer be started up or restored to. This is despite CHECKDB giving a clean bill of health only five minutes earlier. The result is that the last three lines are then repeated ad infinitum.
The only way we have managed to get around this issue so far is to replace the secondary database with a recent backup of the primary. Once this is in place, any outstanding transaction logs are successfully applied when the log shipping restore job next runs. However, this seems rather drastic.It is rather concerning that our warm-standby databases continue to become corrupted without any apparent explanation from SQL Server.
Why does Error log show database restarting everytime a transactionlog backup runs?It also runs a checkdb as well.The log backups are scheduled through a maintenance plan.Is this normal?
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.". Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
I'am doing functionality test on DTS packages and saving my DTS packages to meta data services instead of saving them as local packages. We would like to see what information would be provided by saving them this way, but when we try to open the meta data browser (the 3rd icon under DTS) we get the following error:
An error occurred while trying to access the database information. The msdb database could not be opened.
I have transferred a database from SQL 2000 to SQL 2005 and now I am getting an error when I try to run backup. I get there error "An error occurred while processing 'BackupMetadata' metedata for datase ID..." Does anyone have any suggestions on how to resolve this error?
We have received a backup of a database from an external company for a project that we are taking over. We have attempted to restore the database and it fails giving us the error: "Internal consistency error occurred."
We have run the restore verifyonly command with the results: "The backup set is valid." However, I don't have confidence that the verify is telling the complete story.
It appears that the database is restored and the overall restore is failing on the transaction log file.
I am running SQL Server Enterprise manager. I was able to connected to the database properly. But after restarting the PC I am getting the following error.
"System.NullReferenceException: Object reference not set to an instance of an object"
I have moved the system databases master and mssqlsystermresource database. And after that I was unable to restart the MSSQL Server service. This is SQL Server 2005
I had moved the master db under the minimal configuration. using the parameters /f and /T3608
I have moved the system databases master and mssqlsystermresource database. And after that I was unable to restart the MSSQL Server service. This is SQL Server 2005
I had moved the master db under the minimal configuration. using the parameters /f and /T3608
I have moved the system databases master and mssqlsystermresource database. And after that I was unable to restart the MSSQL Server service. This is SQL Server 2005
I had moved the master db under the minimal configuration. using the parameters /f and /T3608
This morning I found that during the night someone hacked into my remote hosted SQL server 2005 database. Every record in a description field in each of three tables had everything after the first sentence replaced with the same URL. The three pages that used these tables badly infected anyone who viewed them in IE.I had my host restore the 12/30 backup, and I changed all the database and ftp passwords, now I want to be sure my code isn't giving anyone access. I'm using strongly typed datasets. This is my code behind code.Dim sCategory = Request.QueryString("cat")Dim ResourceAdapter As New ResourcesTableAdapters.ResourcesTableAdapterDim dF As Data.DataTable = ResourceAdapter.GetDataByCategory(sCategory)Dim numRows = dF.Rows.CountLabelCat.Text = sCategoryRepeater1.DataSource = dFRepeater1.DataBind() Is there anything I can do to better secure this? Oh, my connect string is in the web.config file only, but it isn't encrypted. I will be encrypting it today.Diane
Hi all.. I've been scouring the forums for about 6 hours to no avail. This is a really simple question. I'm trying to have a registration page that lets the user input name, email, desired username, and password. I want to check the username and email fields to make sure ppl cannot sign up twice. So from what I've gathered I have a couple of options:
1) i can set up a unique constraint on the database columns, 2) i can run a select statement before inserting, 3) i can store the whole database column in a variable then search through it.
My question is how to do option 2? All of my transactions are through a sqldatasource object in c#.
Hi I have a problem. Every time I select the first Item of a dropdownlist, it prevents the Insert to the database. There are 8 droplists on the page but the insert is only effected by the First Item of lstTheme selcetion. My Insert code is here: Any ideas?? Private Sub btnInsertChange_Click(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.CommandEventArgs) Handles btnInsertChange.Command
The database is configured for single publisher, many subscribers,merge replication. The maintenance plan started to fail a couple ofmonths ago and the database would not get backed up. After clearingall the locks, I am able to backup the database manually. The locksreturn again and I'm not able to backup the database with themaintenance plan. How can I get around the lock issue or solve it sothat I can backup the database again?Thanks,Chris
I have a user AD account SOPUSJSmith for example. I have given this account security admin at the SQL Server level and dbo at the database level. Is there any way to prevent them from using ODBC to pull data into an Access DB or an Excel spreadsheet?
I have two instances (Source and Destination) on the same server, i did a full backup of a database on the source server, i did a restore on the destination using the NORECOVERY mode, now the database on the destination as green arrow saying "restoring". From the source database i set up the mirroring, i'm using port 5022 on source and 5023 on destination, everything seems to connect fine but when i start mirroring i get the error message "Database mirroring cannot be enabled because the database is not full recovery error: 1465" but when i look at the property of the db on the source the recovery model shows full as so the destination?
Pages on a full recovery model database corrupted, need to ensure data loss is minimal for restore operation am thinking about restoring the latest full backup.
I am trying to deploy a SQL Server Express database to a remote SQL Server 2005 host. I was planning to copy and paste the data from my local tables to the remote tables using Management Studio Express but my ISP (NTL) appears to be blocking port 1433 and preventing me from getting a connection to the remote database. Will an upgrade to SQL Server 2005 Developer Edition help me? I understand that it has a Backup & Restore Wizard but how does this work? Does it rely on a remote connection and will it fall foul of the NTL port blocking? Or, can the file that the Backup stage produces be copied into the web-based MSSQL Manager, that my web host provides, to restore to the remote database? Any help would be much appreciated.
we're in a business where customers often ask for a foolproof scheme that even prevents folks with DB privileges from fraudulently inserting, updating or deleting data. The scheme must be so air tight that a judge can be convinced of its reliability.
I am getting the following error when creating a endpoint (that will be used for allwayson) The Database Mirroring endpoint cannot listen for connections due to the following error: '10049(The requested address is not valid in its context.)'.
My physical network card is configured with:
10.9.255.170
and iam creating my endpoint with 10.9.255.82
The creation of endpoint is being done with;
CREATE ENDPOINT [Hadr_endpoint] AS TCP (LISTENER_PORT = 5022, LISTENER_IP = (10.9.255.82) FOR DATA_MIRRORING (ROLE = ALL, ENCRYPTION = REQUIRED ALGORITHM AES) GO IF (SELECT state FROM sys.endpoints WHERE name = N'Hadr_endpoint') <> 0 BEGIN ALTER ENDPOINT [Hadr_endpoint] STATE = STARTED END GO use [master] GO GRANT CONNECT ON ENDPOINT::[Hadr_endpoint] TO [account] GO
I'm working on SQL 2012 Box, which is having Logshipping failed on secondary database, the secondary database was in stand by mode right now but no more restore operation performed on this database since 2 weeks! We checked in the SQL error log and found the error code 14421, severity 16, stat: 1
How to reset the logship back to normally, do I need to disable the jobs before proceed any operation!
I am attempting to drop a database (sales), however I receive this message: Error 3274 is "Cannot drop the database 'sales' because it is published for replication." Yet, I no longer have any publications in this database. It seems that there is some orphaned information related to a publication that existed. Any help would be great.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
We have an issue with a 3 node SQL 2012 Always on availability group. Normal operation is node 1 (primary replica) with node 2 and node 3 as secondary replicas.After some patching, SQL wasn't running on node 1 hence the AG flipped over to node 2. This went unnoticed for some time and the transaction log for one of the AG databases became full on node 2 and node 3. (I think this is because it couldn't commit the transactions on node 1 so couldn't truncate it's t-log?) The DB is using synchronous replication btw.So I started SQL on node 1 and flipped the AG back to node 1 (with a data loss warning but I accepted this).Now the issue is that on node 2 and 3, the DB in question is stuck in a "Reverting / In Recovery" State. I've tried various commands such as ALTER DATABASE SET ONLINE, RESTORE DATABASE WITH RECOVERY etc but these fail stating unable to obtain a lock on the DB.
The weird thing is that on node 1 the state of the DB is "synchronised".how to resolve this issue on node 2 and 3? I've left them overnight (in case they were rolling back transactions, the DB is fairly large) but nothing seems to have happened. remove the DB from the AG in node 2 and 3 and add it back in again, ie recreate the replication?
We have reports deployed in the Report Server. While connecting from client, we are getting the error "An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?> <ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
what can cause the above error when connecting to an endpoint via a c# app? the app, and sql are both on my machine ( im just doing this for test purposes and to learn something new.)
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown. An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result. Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated. Thank You.
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer If reset offset = pagenumber - 1 End If Return pagenumber - offset End Function
Got this error running a query with ssms2014 on SqlServer2014 but db has Compatibiliy level 100 (sql2008)
no sql error code in message and no error found in eventviewr (sqlserver log, windows log, application log ecc)when i run that query i got this message in "messages" tab, and in results tab i got a strange result, indeed the value returned doesn't exists in table.
ex table1.field1 possible values= 2,3 it returns 1113344
we got that error thru jdbc too...that query use a lot of joins, unfortunatley i can't post it here. today got this error, so i make a copy of 1 of involved table into another db in the same instance, re run the query on the original db, and it works well.
I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?
Code Snippet Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.
