An Error Occurred While Receiving Data: '10054(error Not Found)'.???
Oct 31, 2007
Hi,
I have set up SB between 2 databases, and I keep geting a variety of error messages in the queue on both sides. The first is:
An error occurred while receiving data: '10054(error not found)'.
And on the other side its
Service Broker received an error message on this conversation. Service Broker will not transmit the message; it will be held until the application ends the conversation.
The only difference between this and the tutorials is that the TCP port have been moved to 4321 instead of 4022, and this has been done both sides, because something else was blocking the 4022 port. This one is definately free on both sides. I have recreated the certificates, the users, the end points, the queues and the services multiple times, and checked them all in the sys.routes etc and they all seem fine.
I do also get a message in the queue that I can receive sometimes that tells me I don't have rights to the service on the other machine. I can send a message to itself and it doesn't complain.
Both machines are on the same domain, and I have also tried to grant rights to public to no avail.
Help!
TIA
Ian.
View 2 Replies
ADVERTISEMENT
Jan 3, 2006
What does this error mean? I get this in the transmission_status column of sys.transmission_queue
An error occurred while receiving data: '10053(An established connection was aborted by the software in your host machine.)'.
Also, does the number in this message correspond to error 10053 in sys.messages?
Thanks
View 3 Replies
View Related
Nov 20, 2007
Hi.
I am stuck with error: An error occurred while receiving data: '64(error not found)'.
My Service Broker configuration:
Server A initiator,
Server B target.
Server A sends message to Server B, Server B sends back reply.
On this stage I receive problem. Server B message does not come to server A.
It stays on sys.transmission_queue on server B.
This problem occurs only during initial setup. During initial setup, on Server B messages, queues, services, contracts, routes, bindings are created. On Server A: routes and bindings. As a last step, a message is sent to Server B.
So, reply on this message never comes. Initial setup is run using procedure with execute as €˜owner€™, owner=€™dbo€™.
But, whenever I send messages after that, everything works fine.
Any suggestions?
Please :-)
View 7 Replies
View Related
Aug 23, 2007
We are using Service Broker to synchronise two databases using async triggers (using a middle server to preform data mapping processing). We are re-using dialogs as we want to ensure order when sending messages which contain the data to be synced. A dialog is created between each intiator and target service (there are 3 of each) which is kept open indefinately (we are only ending conversation upon receiving an end conversation message or error message).
We seem to get it working for a period then after about 1 hour it seems to stop sending and we see the following error in SQL Profiler:
An error occurred while receiving data: '64(error not found)'
Any ideas what could be causing this? We do not see any errors or end conversations. It seems to happen at irregular points.
View 2 Replies
View Related
Aug 17, 2007
Any idea of what this means?
My acknowledgement messages are getting stuck in sys.transmission_queue. In profiler, the message generated by the target server (the one sending the ack) is:
This message could not be delivered because it is a duplicate.
The result of the function GET_TRANSMISSION_STATUS is
An error occurred while receiving data: '121(The semaphore timeout period has expired.)'.
Each time I send a new mesage I get one record in sys.conversation_endpoints and two in sys.transmission_queue. The two records in the transmission_queue are the same except one has a NULL for the message body and is_end_of_dialog=1
If I try to clean out the queues they re-populate (I guess becasue the initiator keeps re-trying the message?)
I have double checked my routes back to the initiator and they seem correct (see below). In fact, a second server is using an identical route and it is working OK.
The only thing tricky on this machine is added a second message queue for a differnet kind of message, and it is replying to a different service broker instance. In other words, on server A, database "Production" sends a message to server B, database "Destination" and Server A, database "Schedule" also sends a message to server B, database "Destination".
In the respective return routes I have double checked the guid for the broker_instance.
The broker_instance value in each return route is right out of server A's sys.databses view:
name service_broker_guid
-------------------------------------------------------------------------------------------------
Production 3BE812A8-5212-45D2-8664-521F83689585
Schedule 86113D85-A594-4EAB-8460-3E459EE8F055
The return routes look like this:
CREATE ROUTE [SendReplyProduction] AUTHORIZATION [mssqlssb]
WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ProductionChangeService' ,
BROKER_INSTANCE = N'3BE812A8-5212-45D2-8664-521F83689585' ,
ADDRESS = N'TCP://Server_A:4022'
The above route should send the reply to the "Production" database on Server A
CREATE ROUTE [SendReplySchedule] AUTHORIZATION [mssqlssb]
WITH SERVICE_NAME = N'//mycompany.com/SSB/Services/ScheduleChangeService' ,
BROKER_INSTANCE = N'86113D85-A594-4EAB-8460-3E459EE8F055' ,
ADDRESS = N'TCP://Server_A:4022'
The above route should send the reply to the "Schedule" database on Server A
Is this the correct way to do it? And can anyone tell me why I get the semaphore error?
For what it is worth, I am using Transport security only with windows authentication (both machines on the same domain and no certificates)
Thanks for any help!
John
View 1 Replies
View Related
Jan 23, 2006
i get this error when i try to connect to sql server 2005 developer edition with the latest JDBC.
sql string =>> jdbc:sqlserver://localhost:1434;databaseName=c1 Elvis elvis
SQL STATE: 08S01
ERROR CODE: 0
MESSAGE: An I/O error occurred while receiving the TDS prelogin response.
And the stacktrace is:
com.microsoft.sqlserver.jdbc.SQLServerException: An I/O error occurred while receiving the TDS prelogin response.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.Prelogin(Unknown Source)
at com.microsoft.sqlserver.jdbc.DBComms.<init>(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
and is called :connection=DriverManager.getConnection(con, user, password);
Please tell me what is wrong ? Because in other part of the code it works fine !
What is this "I/O error occurred while receiving the TDS prelogin response" ?
View 12 Replies
View Related
Jan 24, 2007
Hi,
I am using SQL Server 2005,
while trying to retrieve data from the database; I am getting the following
error:
A transport-level error has occurred when receiving results
from the server. (Provider: TCP Provider, error: 0 - The handle is invalid.)
But I am getting this error randomly.
Can some one help me out?
Waiting for your response
Sudhakar
View 7 Replies
View Related
Mar 8, 2007
Hi,
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error:
A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
Thanks in advance for all replies.
View 3 Replies
View Related
Nov 27, 2006
Hi all,
I
am trying to run a stored procedure which retreives 3 lakhs of records
and updates the data and moves few of those records to some tables.
Since the number of records are more , the time taken for the storede
procedure is around 30 minutes when i directly execute it in query
analyzer.
But I need to execute it from Visula Studio.Net 2005
(c#). Whole of the application contains only one form with a single
button.When I click on the button , this stored procure has to be
executed. But I am getting an error as shown below.
"A
transport-level error has occurred when receiving results from the
server. (provider: TCP Provider, error: 0 - The specified network name
is no longer available.)"
Database used is SqlServer 2000
How to solve this error?. Any ideas are really appreciated.
Thanks and Regards,
Sukanya.
View 4 Replies
View Related
Sep 27, 2006
We've devoted a resource to this today, but I have to believe it's something easy that we're overlooking. The scneario is that we have a production Web application that until last weekend had a SQL 2000 back end. This weekend we installed a new instance of SQL 2005 and everything works (we tested in a sandbox environment, but someone must not have load tested enough) and never saw these exceptions. So, after the upgrade we now receive 100's of thexe SQL excptions per day:A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.)A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)Does anyone know what we've overlooked that's causing this issue?Thanks for any help!
View 2 Replies
View Related
Aug 16, 2006
Hi,
I am trying to mirror the databse with a witness server.
I have sql server 2005 with SP1 or both my mirror and principle and sql express on my witness.
The problem is when I click start mirroring, I get the following error
The server network address"TCP://serveraddress:7026" can not be reached or does not exist. Check the network address name and that the ports for the local and remote epoints are operational.
(Microsoft SQL server, error:1418)
I have pinged the address it works fine . The telnet comes up with a blank screen.
When I look at the the server log file viewer, I get the following message
An error occured while receiving data: 10054 (An existing connection was forcibly closed by the remote host)
for 'TCP://serveraddress:7026'.
Please help me soon
View 6 Replies
View Related
May 17, 2007
In the past week, 3 times I have had our webserver get this error virtually non-stop for several hours at a time.
I think it's due to what it says here http://msdn2.microsoft.com/en-us/library/ms189083.aspx
Connections May Be Forcibly Closed When Running on Windows Server 2003 SP1
When testing scalability with a large number of client connection attempts to an instance of the SQL Server Database Engine running on Windows Server 2003 Service Pack 1, Windows may drop connections if the requests arrive faster than SQL Server can service them. This is a security feature of Windows Server 2003 Service Pack 1, which implements a finite queue for incoming TCP connection requests. It results in the following error:
ProviderNum: 7, Error: 10054, ErrorMessage: "TCP Provider: An existing connection was forcibly closed by the remote host ...
To resolve this issue, use the regedit.exe utility to add the following registry key:
Key Type Name Value
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters DWORD
SynAttackProtect
00000000
Security Note:
Setting this registry key may expose the server to a SYN flood, denial-of-service attack. Add this registry value only if necessary and with an understanding of the security risks. Remove this registry value when testing is complete.
Twice I had this problem after restarting the database server. Could it be that the requests are somehow getting queued and then when the database server comes back up, it gets hit too hard? So then it goes into "protect my ass" mode?
How do you test where these connection requests are coming from?
I don't really want to disable this security setting...
View 1 Replies
View Related
Sep 7, 2007
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
View 5 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Jun 18, 2007
On my computer (WinXP En Prof SP2) I have installed SQL Express 2005 with instance name "SQL2005". Mixed Mode.
I allowed Remote connection to this DB server, enabling TCP/IP protocol on port 1433.
Also SQL Browser is set to autostart.
My firewall is off.
When I try to connect to this server through the CMDline, I use:
sqlcmd -S testpcsql2005 -U sa -P test
I only get: "Sqlcmd: Error: Microsoft SQL Native Client: Client unable to establish connection due to prelogin failure"
If I use:
sqlcmd -S testpcsql2005 -U sa -P asdfghjkl (or any password)
the result will be the same.
If I try to connect to the server through the Management Studio, I just get:
"A connection was succesfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error:0 - An existing connection was forcibly closed by the remote host.)(Microsoft SQL Server, Error: 10054)"
or
"A connection was succesfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error:0 - An established connection was aborted byt the software in your machine.)(Microsoft SQL Server, Error: 10053)"
Next I have installed the new DB on new computer (WinXP En Prof SP2) with the same options (using unattended installation in CMD line) and on this computer it works. It means, that I can establish remote connections to that server with any problems.
I have search on internet to solve this problem bud a I didn't find the solution. I found, that this error relates to winsock layer - WSAECONNABORTED(10053) and WSAECONNRESET(10054) error codes.
But I still don't know, how to solve this and remotely connect to my DB Server...
Thanks for your answers.
Edit 1:
I have tried to uninstall MS Net Framework 2.0, Microsoft SQL Native Client, Microsoft Support Files.
When I try localy connect - it doesn't work, of course.
When I try remotely connect:
"sqlcmd -L" shows, that exists "testpcsql2005"
"sqlcmd -S testpcsql2005 -U sa -P asdfghjkl" (or any password) generate the same Error as before - nothing changed
Is it problem of MS SQL Server or MS Windows? How to solve this?
View 6 Replies
View Related
May 20, 2008
We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
Please help.
View 1 Replies
View Related
Aug 18, 2006
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
View 5 Replies
View Related
Nov 25, 2007
System.Data.SqlClient.SqlError: Cannot open backup device '\.Tape0'. Operating system error 5(error not found). (Microsoft.SqlServer.express.Smo)
i have only one sql instance and tape is istalled successfully.
please help me to find solution for this error.
Thanks,
View 2 Replies
View Related
Aug 22, 2013
I'm having a problem with a flat file source in that the package throws an error straight away. The error I get is as follows:
Information: 0x4004300C at Data Flow Task, SSIS.Pipeline: Execute phase is beginning.
Error: 0xC0202091 at Data Flow Task, Flat File Source [2]: An error occurred while skipping data rows.
Error: 0xC0047038 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on Flat File Source returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
I've tried multiple things to resolve this.. Changing the OutputColumnWidth in the flat file connection manager, checking the file for any irregularites in notepad++ (each line ends as it should with CRLF), the file is encoded in UTF-8 without BOM .
View 7 Replies
View Related
Nov 16, 2007
Hello,
On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.
When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.
These are not data driven subscriptions.
Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.
Thanks,
SqlNew
View 2 Replies
View Related
May 22, 2007
I am getting an error message when I try to print using reporting services: "an error occurred during printing (0x80004005)"
View 4 Replies
View Related
Mar 28, 2007
what can cause the above error when connecting to an endpoint via a c# app? the app, and sql are both on my machine ( im just doing this for test purposes and to learn something new.)
View 1 Replies
View Related
Feb 6, 2006
I have created an RDL file programatically. When I execute the code I get the error as mentioned below:
Error: Sub report cannot be shown.
An internal error occurred on the report server. See the error log for more details. (rsInternalError)
When I copy and paste the code of RDL file into new RDL file and try to preview the output I get correct result.
Note: The new RDL file does not give any error if the output is seen using preview tab but it gives the error only when executed from report viewer or from internet explorer.
Any Suggestion/feedback is highly appreciated.
Thank You.
The code of the sample RDL is shown below:
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>DataSource1</DataSourceReference>
<rd:DataSourceID>fe4806ee-0358-4a87-b764-ac5de049545e</rd:DataSourceID>
</DataSource>
</DataSources>
<BottomMargin>0.25in</BottomMargin>
<RightMargin>0.25in</RightMargin>
<PageWidth>11in</PageWidth>
<ReportParameters>
<ReportParameter Name="machine_id">
<DataType>String</DataType>
<Prompt>machine_id</Prompt>
</ReportParameter>
<ReportParameter Name="from_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>From Date</Prompt>
</ReportParameter>
<ReportParameter Name="to_date">
<DataType>String</DataType>
<AllowBlank>true</AllowBlank>
<Prompt>To Date</Prompt>
</ReportParameter>
</ReportParameters>
<rd:DrawGrid>true</rd:DrawGrid>
<InteractiveWidth>8.5in</InteractiveWidth>
<rd:SnapToGrid>true</rd:SnapToGrid>
<Body>
<ReportItems>
<Table Name="table1">
<DataSetName>Main_Report</DataSetName>
<TableGroups>
<TableGroup>
<Header>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Textbox Name="textbox2">
<rd:DefaultName>textbox2</rd:DefaultName>
<ZIndex>1</ZIndex>
<Style>
<TextAlign>Left</TextAlign>
<PaddingLeft>2pt</PaddingLeft>
<PaddingBottom>2pt</PaddingBottom>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
</Style>
<CanGrow>true</CanGrow>
<Value>=Fields!syscode.Value</Value>
</Textbox>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
<RepeatOnNewPage>true</RepeatOnNewPage>
</Header>
<Grouping Name="table1_Group1">
<PageBreakAtEnd>true</PageBreakAtEnd>
<GroupExpressions>
<GroupExpression>=Fields!syscode.Value</GroupExpression>
</GroupExpressions>
</Grouping>
</TableGroup>
</TableGroups>
<Details>
<TableRows>
<TableRow>
<TableCells>
<TableCell>
<ReportItems>
<Subreport Name="subreport1">
<Parameters>
<Parameter Name="machine_id">
<Value>=Fields!machine_ip.Value</Value>
</Parameter>
<Parameter Name="syscode">
<Value>=Fields!syscode.Value</Value>
</Parameter>
<Parameter Name="from_date">
<Value>=Parameters!from_date.Value</Value>
</Parameter>
<Parameter Name="to_date">
<Value>=Parameters!to_date.Value</Value>
</Parameter>
</Parameters>
<ReportName>Holding_Summary_Multi_Period</ReportName>
</Subreport>
</ReportItems>
</TableCell>
</TableCells>
<Height>0.25in</Height>
</TableRow>
</TableRows>
</Details>
<TableColumns>
<TableColumn>
<Width>10.5in</Width>
</TableColumn>
</TableColumns>
<Height>0.5in</Height>
</Table>
</ReportItems>
<Height>0.75in</Height>
</Body>
<rd:ReportID>d0a1293a-e98c-4f75-9597-03426d2e7218</rd:ReportID>
<LeftMargin>0.25in</LeftMargin>
<DataSets>
<DataSet Name="Main_Report">
<Query>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
<CommandText>select account_syscode as syscode , 'display Name' as display_name , * from mars_customer_list
where machine_ip = @machine_id</CommandText>
<QueryParameters>
<QueryParameter Name="@machine_id">
<Value>=Parameters!machine_id.Value</Value>
</QueryParameter>
</QueryParameters>
<DataSourceName>DataSource1</DataSourceName>
</Query>
<Fields>
<Field Name="syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>syscode</DataField>
</Field>
<Field Name="display_name">
<rd:TypeName>System.String</rd:TypeName>
<DataField>display_name</DataField>
</Field>
<Field Name="customer_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>customer_syscode</DataField>
</Field>
<Field Name="account_syscode">
<rd:TypeName>System.Int64</rd:TypeName>
<DataField>account_syscode</DataField>
</Field>
<Field Name="machine_ip">
<rd:TypeName>System.String</rd:TypeName>
<DataField>machine_ip</DataField>
</Field>
</Fields>
</DataSet>
</DataSets>
<Code>Shared offset As Integer
Public Function GetPN(reset As Boolean, pagenumber As Integer) As Integer
If reset
offset = pagenumber - 1
End If
Return pagenumber - offset
End Function
</Code>
<Width>10.5in</Width>
<InteractiveHeight>11in</InteractiveHeight>
<Language>en-US</Language>
<PageFooter>
<ReportItems>
<Image Name="image1">
<Sizing>Fit</Sizing>
<Left>8.875in</Left>
<MIMEType />
<Width>1.5in</Width>
<Source>External</Source>
<Style />
<Value>bottom_right_logo.gif</Value>
</Image>
</ReportItems>
<Height>0.5in</Height>
<PrintOnLastPage>true</PrintOnLastPage>
<PrintOnFirstPage>true</PrintOnFirstPage>
</PageFooter>
<TopMargin>0.5in</TopMargin>
<PageHeight>8.5in</PageHeight>
</Report>
View 8 Replies
View Related
Sep 24, 2015
Got this error running a query with ssms2014
on SqlServer2014
but db has Compatibiliy level 100 (sql2008)
no sql error code in message and no error found in eventviewr (sqlserver log, windows log, application log ecc)when i run that query i got this message in "messages" tab, and in results tab i got a strange result, indeed the value returned doesn't exists in table.
ex table1.field1 possible values= 2,3
it returns 1113344
we got that error thru jdbc too...that query use a lot of joins, unfortunatley i can't post it here. today got this error, so i make a copy of 1 of involved table into another db in the same instance, re run the query on the original db, and it works well.
View 2 Replies
View Related
Apr 8, 2008
Hi There,
I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?
Code Snippet
Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.
Thanks
Vivek
View 5 Replies
View Related
Nov 10, 2006
Hello everybody,
I am trying to use the reporting services on Windows 2003 with SQLServer 2005. Everything works fine in the report manager and I can access and render the reports without any problem. But when I try to access the reports directly with the URL from the ReportServer, I get the following error :
Reporting Services Error
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found
SQL Server Reporting Services
So I went to see the error log, and here is what it says :
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product>
<Locale>en-US</Locale>
<TimeZone>GMT Standard Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServer__11_10_2006_13_43_22.log</Path>
<SystemName>VODAFONE</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!webserver!5!11/10/2006-13:43:23:: i INFO: Reporting Web Server started
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!5!11/10/2006-13:43:23:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!5!11/10/2006-13:43:23:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!5!11/10/2006-13:43:23:: i INFO: Evaluation copy: 0 days left
w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Database Cleanup (Web Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!runningjobs!5!11/10/2006-13:43:23:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
w3wp!library!5!10/11/2006-13:43:23:: Unhandled exception was caught: Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found
at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.EnsurePropertyLoaded()
at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.GetInstance()
at Microsoft.Reporting.WebForms.ReportViewer.CreateServerReport()
at Microsoft.Reporting.WebForms.ReportViewer..ctor()
at Microsoft.ReportingServices.WebServer.ReportViewerHost..ctor()
at ASP.pages_reportviewer_aspx.__BuildControlReportViewerForm()
at ASP.pages_reportviewer_aspx.__BuildControlTree(pages_reportviewer_aspx __ctrl)
at ASP.pages_reportviewer_aspx.FrameworkInitialize()
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
w3wp!library!5!10/11/2006-13:43:23:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.Reporting.WebForms.InvalidConfigFileTypeException: The type Microsoft.ReportingServices.UI.WebControlConnection, ReportingServicesWebUserInterface, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91 does not implement IReportServerConnection or could not be found
at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.EnsurePropertyLoaded()
at Microsoft.Reporting.WebForms.ConfigFilePropertyInterface`1.GetInstance()
at Microsoft.Reporting.WebForms.ReportViewer.CreateServerReport()
at Microsoft.Reporting.WebForms.ReportViewer..ctor()
at Microsoft.ReportingServices.WebServer.ReportViewerHost..ctor()
at ASP.pages_reportviewer_aspx.__BuildControlReportViewerForm()
at ASP.pages_reportviewer_aspx.__BuildControlTree(pages_reportviewer_aspx __ctrl)
at ASP.pages_reportviewer_aspx.FrameworkInitialize()
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context)
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.pages_reportviewer_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
--- End of inner exception stack trace ---
w3wp!library!5!10/11/2006-13:43:25:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson
w3wp!library!5!10/11/2006-13:43:26:: i INFO: Catalog SQL Server Edition = Enterprise
w3wp!webserver!5!11/10/2006-13:43:34:: i INFO: Reporting Web Server stopped
Does anyone have any idea about what happends ? Any suggestions maybe about anything I should try ?
Thanks very much in advance.
[edit] I just installed a few minutes ago the service pack 1 for SQL Server 2005 and Reporting services, but obviously it doesn't change anything to my problem. [/edit]
View 4 Replies
View Related
Jun 14, 2007
An internal error occurred on the report server. See the error log for more details. (rsInternalError) - This is the error I get when I try to edit a subcription then click finish.Where do I start in solving this?, heres the log -<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.3042.00</Product>
<Locale>en-US</Locale>
<TimeZone>GMT Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFilesReportServerWebApp__06_14_2007_12_02_20.log</Path>
<SystemName>MCSCITRIX</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 1</OSName>
<OSVersion>5.2.3790.65536</OSVersion>
</Header>
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing ReportBuilderTrustLevel to '0' as specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing MaxScheduleWait to default value of '1' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DatabaseQueryTimeout to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing ProcessRecycleOptions to default value of '0' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsScavengerCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsDbCycle to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing RunningRequestsAge to default value of '30' second(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing CleanupCycleMinutes to default value of '10' minute(s) because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonFlags to default value of '1064' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonDumpOnExceptions to default value of 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to default value of 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing SecureConnectionLevel to default value of '1' because it was not specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!14/06/2007-12:02:21:: i INFO: Initializing WebServiceUseFileShareStorage to default value of 'False' because it was not specified in Configuration file.
w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id)
at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task)
at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule)
at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext)
at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: HTTP status code --> 200
-------Details--------
System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id)
at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task)
at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule)
at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext)
at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2005.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at Microsoft.SqlServer.ReportingServices2005.RSConnection.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at Microsoft.ReportingServices.UI.DataDrivenSubscription.Save()
at Microsoft.ReportingServices.UI.DataDrivenPropertiesControl.Buttons_FinishClick(Object sender, EventArgs args)
at Microsoft.ReportingServices.UI.WizardButtons.OnFinishedClicked(EventArgs args)
at Microsoft.ReportingServices.UI.WizardButtons.FinishButton_Click(Object sender, EventArgs args)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
w3wp!ui!5!14/06/2007-12:06:09:: e ERROR: Exception in ShowErrorPage: System.Threading.ThreadAbortException: Thread was being aborted.
at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg) at at System.Threading.Thread.AbortInternal()
at System.Threading.Thread.Abort(Object stateInfo)
at System.Web.HttpResponse.End()
at System.Web.HttpServerUtility.Transfer(String path, Boolean preserveForm)
at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
w3wp!ui!b!6/14/2007-12:08:23:: e ERROR: System.Web.Services.Protocols.SoapException: An internal error occurred on the report server. See the error log for more details. ---> Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details. ---> System.Data.SqlClient.SqlException: Only members of sysadmin role are allowed to update or delete jobs owned by a different login.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.Library.SqlAgentScheduler.DeleteTask(Guid id)
at Microsoft.ReportingServices.Library.SqlAgentScheduler.UpdateTask(Task task)
at Microsoft.ReportingServices.Library.SchedulingDBInterface.UpdateTaskProperties(Task task, Boolean updateSqlAgentSchedule)
at Microsoft.ReportingServices.Library.TimedSubscriptionHandler.ValidateSubscriptionData(Subscription subscription, String subscriptionData, UserContext userContext)
at Microsoft.ReportingServices.Library.SubscriptionManager.ValidateSubscriptionData(Subscription subscription, String eventType, String subscriptionData)
at Microsoft.ReportingServices.Library.SubscriptionManager.SetSubscriptionProperties(Guid id, String eventType, String matchData, ExtensionSettings extensionSettings, String description, ParameterValueOrFieldReference[] parameters, DataRetrievalPlan dataSettings)
at Microsoft.ReportingServices.Library.SetSubscriptionPropertiesAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.SetSubscriptionProperties(String SubscriptionID, ExtensionSettings ExtensionSettings, Boolean isDataDriven, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.SetDataDrivenSubscriptionProperties(String DataDrivenSubscriptionID, ExtensionSettings ExtensionSettings, DataRetrievalPlan DataRetrievalPlan, String Description, String EventType, String MatchData, ParameterValueOrFieldReference[] Parameters)
w3wp!ui!b!6/14/2007-12:08:23:: e ERROR: HTTP status code --> 200
-------Details--------
View 3 Replies
View Related
Nov 21, 2007
Why the error is coming:
"An internal error occurred on the report server. See the error log for more details. (rsInternalError)"
View 2 Replies
View Related
Mar 13, 2008
First off I understand that it is a horrible idea to run extremely large/long running reports, but sometimes it ends up being the best possible solution due to external forces.
I've got a 25,000 page report that we recently converted from crystal reports to SSRS. The SSRS server is a 64bit 2003 server with 32 gigs of ram running SSRS 2005. When running the report through the report manager web application, it renders in the browser/viewer after about 12 minutes. Exporting to pdf through the browser/viewer in the report manager takes an additional 55 minutes. It does work and it produces a whopping 1.03gb pdf.
Unfortunately, I've run into a problem when trying to do this from a console application using the SSRS client API. After about 30-35 minutes I get an exception on the client with the following error:
Exception Message: The underlying connection was closed: An unexpected error occurred on a receive.
InnerException = Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
Here is the api call:
Code Snippet
byte[] m_data = reportingService.Render(this.ReportPath, this.ExportFormat, null,
deviceInfo, selectedParameters, null, null, out encoding, out m_mimeType,
out usedParameters, out warnings, out streamIds);
Here are some things I've tried so far:
set the HttpRuntime ExecutionTimeout value to 3 hours on the report server
disabled http keep alives on the report server
increased the script timeout on the report server
set the report to never time out on the server
set the report timeout to several hours on the client call
Disabled antivirus on the client side, and verified there was no antivirus running on the reporting server.
Tried using default credentials in the ReportingService object as opposed to supplying credentailsAny ideas would be appreciated. I understand the best solution is to split the report up into smaller reports, which is the backup option, but being able to keep it as one report is the goal.
View 1 Replies
View Related
Apr 3, 2008
I have managed to get the Forms Authentication sample to work bu there is a hitch. I am running Report Server and Report Manager on the same(test) PC. I can logon to the Report Server without a problem but when I try logon from the UILogon.aspx page for Report Manager I receive the following error:
An error occurred while attempting to get the ReportServer Url. The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
An error occurred while attempting to get the ReportServer Url. The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)An error occured while attempting to get the ReportServer Url. The RPC server is unavailable.(Exception from HRESULT: 0x800706BA).
I can register users which suggests that the page can connect to the database.
Any help???
View 3 Replies
View Related
May 10, 2007
I have tired for this!
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.".
Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
View 6 Replies
View Related
Dec 20, 2006
Hi,
I just installed SQL Server 2005 on Windows Vista.
I am getting an error "An unknown error occurred in the WMI
provider. Error Code 8000000A" when connecting to a web server. The
reporting services is running. Is there any other installation that is
missing. Please help.
View 4 Replies
View Related
Jun 20, 2007
hello
I have a problem with Sql task
when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue."
I'm using ODBC connexion for a csv file
someone can help me ?
thanks
View 4 Replies
View Related
