Are Measure Expressions Supported in SSAS 2014 Standard Edition?In 2005 SSAS, I remember that Measure Expressions were not supported in the Standard Edition, only Enterprise Edition.
View 2 RepliesHow to put these calculated measures under the folder "sales line". i want to see it under the drop down...
View 5 Replies View Relatedwe are having an existing cube in that we need to update with new measures . The Measure groups are added to the cube as linked object. so when we are updating the measure group it is throwing the exceptions as follows..“Errors in the OLAP storage engine: The metadata for the statically linked measure group, with the name of 'SalesActual', cannot be verified against the source object.”
View 5 Replies View RelatedI would like to know the possibility of creating Measure based on the below data.
I don't need to show any aggregate value. I need to show the value as it is.
Developing a Retail cube using SSAS 2012. One of the dimension is DimCustomer with SCD type II. Each Customer can be a member or a non-member over a period of time. We have StartDt and EndDt to reflect the membership status.
eg:
Joe is a member between 06-01-2014 and 31-08-2014
Joe is a non-member between 09-01-2014 and 01-31-2015
Joe is a member between 02-01-2015 and 04-30-2015
Joe is a non-member between 05-01-2015 and 12-31-9999
Without adding fact row of Joe for each day to reflect the membership status, I want to provide the ability to measure "Active Customers Count" on a given date. There are 2 million customers in the DimCustomer Table.
I have created SSAS Tabular model project.
I have dimensions like XYZID, Names, Zone etc.
When I create a measure using count function for XYZID. The name of the measure is Count of XYZID.
Its the same which gets displayed in Excel while I connect the model.
How to rename the "Count of XYZID" to ABC ??
getting Correct Measure based on Member Present in Other Attribute .
I am working on SSAS 2012 and have cube build and ready ..
I have Two Measure in Cube
[MEASURES].[Actual] and [MEASURES].[Target] and I need to create One more Calculate Measure
I have dimension DimProduct
I want to Display [MEASURES].[Actual] if Color "Purple" is present for PRODUCT1 Else Display [MEASURES].[Target].
MDX to create Calculate Measure for this logic?
I learned that SQL2000 Standard Edition can only support up to 2GB RAM, we have a WIN2K system on a server with 4CPU, 4GB RAM,
if we run SQL2000 Stanard Edition on it, will the 2 extra 2GB of RAM be wasted ?
Since there is a big diff. between licensing cost of SQL Standard and Enterprise, that's why the user choose Std. edition.
Any opinion or comment...
I created an Integration Services Package that runs fine from my local computer using BIDS. However when I imported into our SQL Server and try to run it from there I get the following error:
DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Data Conversion"
We are running SQL Server 2005 Standard Edition 64-bit.
We have integration services installed on the server. Is data conversion something that is not supported on Standard Edition?
Also have a similar message for "Send Mail Task."
Is there anywhere that outlines what features are supported on each version?
The Semi-Additive Measures feature of MS SQL Server 2005 is not supported in its Standard Edition SKU. How do solve this issue? What editions support the feature?
View 1 Replies View RelatedPlease can someone give me a url or even their own list of support / unsupported components in SQL server 2005 Standard edition.
I know fuzzy lookup is not supported. Is a slowly changing dimension supported?
Its a bit difficult to tell when I get bizzare "Product level is insufficient" error for even a basic derived column transformation when executing a package using SSIS unless it is executed using a scheduled job....
thanks,
Nicole
I have a new 2014 SSAS installation. During VS2013 Tabular Project create I get an error Cannot connect, Reason The workspace database on server ***** is not running in tabular mode.I've changed msmdsrv.ini - DeploymentMode>2...The server wont start.
View 3 Replies View RelatedI have been tasked with processing a large tabular cube using SQL AS 2014 (with latest CUs).The three Fact tables having 1.2 billion rows (in each table) have been divided into 30 vertical partitions to aid in parallel processing. So around 40 million rows per partition.
Using SQL Profiler to monitor the Row counts (IntegerData) of records processed seems to max out around 2 million rows per minute, then tapers down to about 200k /minute.
The processing is taking over 14 hours and I need to get it lower if possible. The server has 48 cores (2.66MHz) and over 1TB RAM installed. But I really don't ever see CPU exceed 20% having a maximum of 206 threads running on the instance msmdvr.exe
Available RAM is always at least 30% (or 300GB).
I have increased the Vertipaq MIN/MAX 60%/80%
I have increased the OLAP / Processing / Max Thread Pool Min 500 and Max to 1000.
The connection properties have been increased to allow 100 connections, the majority of the processing consumes about 92 connections for the 90 large partition views for the facts.
What can be done to increased the server resource utilization and decrease processing times?
I have increased both
I am trying to implement data masking based on user login and not sure why this is not working. I have the dimensions DimBrand, DimProduct and DimUser. I should mask the BrandCode with 'XXXX' nothing but in the report all the BrandCode should appear but few of the code will be masked if the user is not belongs to that group. I have a fact table FactProduct in this. In the cube I created all these 3 dimensions and the fact table. I created a new dimension DimBrandMask and I separated the code over there with a relationship with the actual DimBrand dimension. In the cube a reference relationship is set up with the measure group. Created a role with read access.
In the dimension data tab of role I put the below MDX to allowed set.
NonEmpty([DimBrandMask].[Brand Code].Members, (StrToMember("[DimUser].[Login Name].[Login Name].[" + UserName() + "]") ,[Measures].[Dim User Count]))
And in Denied Member set i put the below MDX
IIF( (StrToMember("[DimUser].[Login Name].[Login Name].[" + UserName() + "]"), [DimUser].[Access Right].&[False]), NONEMPTY( [DimBrandMask].[Brand Code].Members,(StrToMember("[DimUser].[Login Name].[Login Name].["
+ UserName() + "]"), [DimUser].[Access Right].&[False], [Measures].[Dim User Count])),{})
Note I created one measure group from the DimUser table and the measure [Dim User Count] is used in the above query.
I am expecting some result like below
Brand BrandCode Count
Brand1 b1 6
Brand2 XXXXX 5
Brand3 XXXXX 10
In my cube there are two measures which are used in different calculations.Now I'm need to show in report if there any months in data when both or even another one of the measures is not updated (value = 0 or NULL).
how should I create the calculated measure for that?
I have tried in mgmt studio to plan this but I'm in a loop of errors.
I want to filter a measure based on another measure (both are measures on the same FACT table).Distinct Number of Users HAVING.User Cost above 0.
I tried doing having but because it’s two measures and not a tuple with a dimension it writes an eror.My query is something like:
SELECT
[Measures].[Distinct Number of Users ]
having [Measures].[User Cost] >0
ON
COLUMNS,
[code]....
Please note, that I want it in a MDX query not needing to change the cube or DWH table.
Robert Bruckner [MSFT] in his response to "This field is missing from the returned result set" says that rsMissingFieldInDataSet is "only a warning"
I have a report with 7 simple calculated measures to show counts for 7 ratings: ([Measures].[Score Card Count],[Attainment].[Attainment - ATTAINMENT].<rating>).
6 measures work fine; one, for which there is no rating in the fact table returns rsMissingFieldInDataSet warning. Even worse, if I use this field in an expression in the report with other measures, the return is always nothing.
In other words, although this is "only" a warning, it actually causes errors by not returning values from expressions.
I tried to check for null/nothing but could not prevent "breaking" the expressions. Any ideas?
how to change measure names in ssas. i need to change it from Total measure to Total GM.
how to change Dimension names in ssas. i need to change it from ID to Master ID.
I am writing a Reporting Services report pointed at an Analysis Services data cube, and in order to have more control over the MDX, I needed to switch my SSRS data source from the .NET Provider to the OLEDB provider (from ".NET Framework Service Provider for Analysis Services" to "OLEDB Provider for Analysis Services", that is). I'm also entering my MDX in as an expression in the data source.
I noticed that when I summarize this data in the table footer on the report, the summary values that use the Aggregate function (=aggregate(fields!fieldname.value) for example) are blank.
I'm assuming that since the OLEDB provider is an "older" data provider for SSAS data and the Aggregate function was new in 2005 with the .NET provider, the OLEDB provider doesn't support the Aggregate function. I was wondering if someone could confirm that this is the case?
Also, is there any other functionality that is not supported by OLEDB that would be supported by the newer .NET provider (aside from the ability to generate fields, parameters, and use the MDX query designer, of course)?
Thanks.
I have built a fact table and few dimension views in Datamart with the aim of creating a Cube.
On the Fact table I have added a CASE Statement with the following threshold for Premium due amounts:
CASE WHEN....
'Due_0-1_Month'
'Due_1-2_Month'
'Due_2-3_Month'
'Due_Over_3_Months'
'Overdue_0-1_Month'
'Overdue_1-3_Month'
'Overdue_3-6_Month'
'Overdue_Over_6_Months'
...END
I then created a Dimension to link this to:
CREATE VIEW...
Select 'Due_0-1_Month' as Ageing_Threshold
union all
Select 'Due_1-2_Month'
union all
Select 'Due_2-3_Month'
[Code] ....
I was successful in processing the cube, however the problem is everytime I drag the dimension on the columns field in Pivot tables the Thresholds start to break up the other amounts that I have on display like Acquisition Costs, Tax amounts. I am only interested in showing the breakdown of Premium amount measure by the Threshold dimension.
somehow 'Hide' or 'prevent' the Threshold dimension from breaking down the other measures on the Pivot and only breakdown the amounts for Premium?
how I should structure my tables in SQL or any MDX queries to resolve this.
I am very new to MDX. I have the sales amount measure and date dimension.
I need two measure sales value for the below condition. I am going to display this result in SSRS.
1. For between from date and todate
2. For last week range
Any example on how to output more than one measure in an MDX query. Lets say I want to display stdev(x) and average(x) (or any other two measures)?
View 7 Replies View RelatedI am getting same value all over how to get unique values for each measures.
how to resolve it.
The data attached below is from a Fact table. When this data is browsed in the Cube the end user is only interested in value of Measure 1 when it is not equal to zero. Measure 1 is a base measure .how to suppress the value 0 for Measure 1 in the Cube.
DimesionKey1
DimensionKey2
DimensionKey3
Measure 1
Measure 2
Measure 3
[code]...
I'm trying to create a percentile rank function based on the standard WIKI version:
I've seen Brian Knight's article here, but that only deals with percentile.
Where I'm struggling is getting the count of members in a set using a measure, in the current context on the same hierarchy, as the filter expression. I'm using the comparative set as in belonging to the same geographical location, and therefore associating by another attribute.
So, cl as below:
MEMBER [Measures].[RegionPercentileCount] AS
Count(
Filter(
NonEmpty(
descendants(Ancestor(
[Supplier].[NameMap].CurrentMember,
[Supplier].[NameMap].[Region]),
[Supplier].[NameMap].[Supplier Id]),
[Measures].[ActiveMeasure])
, [Measures].[ActiveMeasure] <
([Supplier].[NameMap].CurrentMember,
[Measures].[ActiveMeasure])))
Using the same measure and context hierarchy is always going to be equal, and therefore the count is always zero. Its almost as if I need a nested context for the FILTER which allows me to use enumerate the set on the same hierarchy whilst maintaining the external reference.
I'm thinking that perhaps I'm going to have to create another hierarchy and use that as the filter set and reference through StrToMember or similar.
I have a dimension called as DIM1 which has list of all measures and has an attribute called as ATTRMDX Formula. The formula will be like
([DIM1].[ATTR Measure Code].&[M1],[Measures].[ATTR MEASURE VALUE])+([DIM1].[ATTR Measure Code].&[M2],[Measures].[ATTR MEASURE VALUE]).
I want to pass this formula to a calculated measure as given below -
MEMBER [Measures].[FormMeasure] as ([Measure].[ATTRMDX Formula].currentmember.MEMBERVALUE)
but I get the string value itself as output, but when I put the formula as a string in the calculated measure I obtain the value.
I am trying to count a set as a calculated measure, when this set is called directly in the row , it returns fast, but when i try to count the set as calculated measure(so i can slice with another dimension) the query keeps running forever.
The queries are below
select
{} on 0,
nonempty
(
{([Transaction].[RPC Count].&[1],[Transaction].[Account ID].[Account ID])}
,
{([Account].[PAYMENTSTATUS].&[0],[Account].[Account ID].[Account ID])}
) on 1
[Code] .....
Hi
-I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine.
Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM.
I want to use partition function with the enterprise edition, will the trial version of sql server work for me?
-If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database?
- Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
Thanks
Hello!M a newbie.. I just want to know, that wots the difference b/w SQL Server Standard Edition and Express Edition.?And can I use Visual Studio 2005 (Professional Edition) with SQL Server Express Edition.?
View 1 Replies View RelatedDear All,We have a database which contains many tables which have millions ofrecords. When We attach the database with MS SQL Server 2005 StandardEdition Server and run some queries (having joins, filters etc.) thenthey take very long time to execute while when We execute same querieson Enterprise Edition then they run 10 times faster than on standardedition.Our database does not use any features which are present in EnterpriseEdition and not present in Standard Edition. We want to know what arethe differences between Standard Edition and Enterprise Edition forperformance. Why should we go for Enterprise Edition when StandardEdition has all the features required.We are presently using evaluation versions of SQL Server 2005 Standardand Enterprise Editions.Thanks and regards,Nishant Sainihttp://www.simplyjava.com
View 23 Replies View RelatedI am attempting to upgrade a 2005 Standard Edtion to Enterprise Edition. This is a default instance. All components are upgraded successfully except the Database Engine. I receive the following error:
SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and then run SQL Server Setup again.
This installation does not have encryption enabled, so I do not undersand the error or how to correct it.
After rebooting the SQL instance appears to be upgraded to Enterprise, but it cannot be upgraded to SP2.
Thanks,
Hi all--I'm researching the cleanest downgrade path from a trial edition of SQL Server 2005 Enterprise to a licensed Standard Edition copy. It looks like downgrading will entail uninstalling the old version and installing the new version, but I'd like to save the original setup as much as possible. Detaching the old databases will preserve the non-system databases; what method would work best for restoring the system databases?
Thanks!
- Jon
The enterprise edition of SQL server includes some advanced BI features, for example the fuzzy lookup feature of IS. If the IS package lives on an enterprise edition of SQL server and the database the package it is targeting lives on a standard edition of SQL server can the advanced features be used? Can you run a fuzzy look against a database on a standard edition of SQL server when th IS package lives on an enterprise edition of SQL server? THANKS!
View 1 Replies View Related