I have a cube that has a Dimension set up with several values some of which are bools. While Browsing in Excel or SSMS, two new values, when used as a filter shows (All) (Blank) and (True) for selections instead of (All) (True) and (False).
View 2 RepliesI have a stored procedure that has a boolean (bit) field passed to it (@emailcontract). If a user checks the check box on the webform I would like my where to return only the records where the email_contract column is true. If they don't check the check box I would like it to return records where email_contracts is true or false.
What would my where cluse look lile for this?
All
Can I ask what data type i use for a true false response (Boolean) in my table?
Thanks
Gibbo
Hi,
I need to check the existence of a row in a table.
So i am using an if condition
like
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[CheckNOAStages]
@NOAID int,
@StageCode nchar(20)
AS
BEGIN
SET NOCOUNT ON;
Declare @Count int
Select @Count =Count(NOAId) from NOAStages where NOAID=@NOAID and StageCode=@StageCode
if (@Count>0)
Begin
return 1
end
else
begin
return 0
end
END
The stored proc is executing but on the Data Access Layer
I have this
Boolean exists = Convert.ToBoolean (Execute.ExecuteReader(spCollection, dbSQL));
Some how I am always getting false . How can I fix this?
Thanks
Hello
I am exporting an SQL Server table to a comma delimited text file. The values of Columns defined as Bit are exported as "True" or "False", but I would like that in the file appear 1 or 0 instead (with no surrounding double quotes). How can I acomplish that?
I tried using a Transformation and convert to single byte unsigned integer, but True values are exported as "255" and False values as "0". Why?
Thanks a lot.
Hi there, I've tried googling this (and looking at the many questions on the forum :) but I've not managed to find a decent tutorial / guide that describes a method for using checkboxs to insert true/false flags in a MS SQL db. The db field i'm setting has type set to "bit", is this correct? And secondly (its been a long day!) I just cant figure out the code to assign the bit 1 or 0 / true or false. This is what I've got so far but it's not working........Function InsertProduct(ByVal prod_code As String, ByVal prod_name As String, ByVal prod_desc As String, ByVal prod_size As String, ByVal prod_price As String, ByVal prod_category As String, ByVal aspnet As Boolean) As Integer Dim connectionString As String = "server='server'; user id='sa'; password='msde'; Database='dbLD'" Dim sqlConnection As System.Data.SqlClient.SqlConnection = New System.Data.SqlClient.SqlConnection(connectionString) Dim queryString As String = "INSERT INTO [tbl_LdAllProduct] ([prod_code], [prod_name], [prod_desc], [prod_size], [prod_price], [prod_category],[aspnet]) VALUES (@prod_code, @prod_name, @prod_desc, @prod_size, @prod_price, @prod_category, @aspnet)" Dim sqlCommand As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(queryString, sqlConnection) sqlCommand.Parameters.Add("@prod_code", System.Data.SqlDbType.VarChar).Value = prod_code sqlCommand.Parameters.Add("@prod_name", System.Data.SqlDbType.VarChar).Value = prod_name sqlCommand.Parameters.Add("@prod_desc", System.Data.SqlDbType.VarChar).Value = prod_desc sqlCommand.Parameters.Add("@prod_size", System.Data.SqlDbType.VarChar).Value = prod_size sqlCommand.Parameters.Add("@prod_price", System.Data.SqlDbType.VarChar).Value = prod_price sqlCommand.Parameters.Add("@prod_category", System.Data.SqlDbType.VarChar).Value = prod_category If chkAspnet.Checked = True Then sqlCommand.Parameters.Add("@aspnet","1") Else sqlCommand.Parameters.Add("@aspnet","0") End If Dim rowsAffected As Integer = 0 sqlConnection.Open Try rowsAffected = sqlCommand.ExecuteNonQuery Finally sqlConnection.Close End Try Return rowsAffected End Function Sub SubmitBtn_Click(sender As Object, e As EventArgs) If Page.IsValid then InsertProduct(txtCode.Text, txtName.Text, txtDesc.Text, ddSize.SelectedItem.value, ddPrice.SelectedItem.value, ddCategory.SelectedItem.value, aspnet.value) Response.Redirect("ListAllProducts.aspx") End If End SubAny help would be appreciated or links to tutorials.ThanksBen
View 2 Replies View RelatedSir
I want to Return 1 and 0 after update , delete , Insert statement
IF Records Effected Return 1 else return 0
Pls help me out .........Sir
Yaman
I want to pass a single char to a query and use that to set two flags.
(
@ID int,
@AssessedID int,
@CompetencyID int,
@Status char,
@Creator int
)
AS
UPDATE P4_Assessment
SET P4_Cancelled_f = (@Status = ('C')),
P4_Competent_f = (@Status = ('P')),
P4_Date = getdate(),
P4_Creator = @Creator
WHERE P4_ID = @ID
I want to set the P4_Cancelled_f to true (if @Status = 'C') or false if it doesn't.
This sort of syntax is fine in C#, but fails in a query. I also tried using IN (@Status IN ('C'))
Is this sort of logic possible in TSQL or should I use two parameters and set them in my code as 1 or 0?
TIA
I need a way to test if a convert function will work before I process it. if it fails, I want to intercept the error and return my own error to the front end
ex
if convert(int,@x) is true then do; else do
please email me if anyone has some advice
Mike
Actually title should be returns true when should false.
I want to check a table to see if a record already exists, if it doesn't then insert it, else do nothing:
IF NOT EXISTS
(SELECT 1 FROM Table1 WHERE col1 = 'Test')
BEGIN
INSERT INTO Table1 (col1) VALUES ('Test')
END
The value 'Test' is already in the database yet, the code is saying it's not and trying to insert it, resulting in duplicate key errors.
When I enter a a true or false value into a boolean field, what is the proper way to enter it? I'm using:
INSERT INTO tblTable (IsSomething)
VALUES (False)
I've heard that a better way is to use 1 and 0, or something.
Hi everyone.
I've got a Select query that pulls out some data from my database. Two of the columns are both booleans (bit's of size 1) so they come back as TRUE and FALSE - which I thought was fine.
However, the users are wanting to see YES and NO since they find TRUE and FALSE confusing (yes I know how silly that sounds).
Is there any way I can do this?
My query is like this:
SELECT [stuff], [things] FROM [table1], [table2] WHERE [table1].[condition] = [table2].[condition]
Thanks
Andrew
Hai,
I am trying to design a database for storing trule/false questions.
I have no need to store any thing like chapters are topic. I want to just design a bare minimum tables for just storing questions and its responses.
So does the following tables and fields suffice to achieve that?.
Questions_table(id(autogenerated),course_id,Questi on(text type))
id field uniquely identify each question, course_id(ex:CRS235) is used to identify which course a particular question belongs to, and Question filed store actual question.
Response_table(id,response)
Response field is of int type, 1 for correct answer, 0 for wrong answer. I am not storing options for each question because every question has same options that is True/False.
So, will this work. Please advice and I would appreciate if any one can point me to a good resource on the web.
Thanks,
Hi,
I'm using SSIS to update the destination table.
Both servers are running identical SQL Server 2005 versions.
I want to copy data and replacing existing data WITHOUT dropping the destination table first.
The SSIS package works when:
1) DropObjectsFirst = TRUE
2) CopyData = TRUE
3) ExistingData = REPLACE
The SSIS package does not work when:
1) DropObjectsFirst = FALSE
2) CopyData = TRUE
3) ExistingData = REPLACE
The error I get is the "destination table already exists". Of course, it already exists. I just want to copy/update the destination table. So, why does SSIS insist on dropping the table first?
It is my understanding that when having LinkedServers, the option "enable promotion of Distributed Transactions for RPC" should be set to TRUE, so we can rollback , if needed, remote transactions. At least, that's my understanding of that setting.
Having said that, the TRUE setting is affecting this particular TSQL code, inside an sproc, which I would prefer not to alter:
Insert into #TempTable
EXEC ServerB.MyDatabase.MyStoreProcedure
@param1= '',
@param2= ''
When set is set to TRUE (current setting) I get this error:
OLE DB provider "SQLNCLI11" for linked server "ServerB" returned message "The partner transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Line 28
The operation could not be performed because OLE DB provider "SQLNCLI11" for linked server "ServerB" was unable to begin a distributed transaction.
... when set to off, the error goes away.
When i add a dimension to the cube dimension without any relation in my dimension usage to any measure group my units are going down.However when i remove the dimension from the cube am getting the correct values.
View 4 Replies View RelatedHi all
sorry im new with using Reporting Services and even more inexperienced with using cubes.
My situation is as follows. I perform dynamic grouping (user selects the view via a parameter) Depending on the view selected, I need to change the dimension filter in the dataset.. Is this possible ?
Regards,
Neil
Best way to print Dimension Usages with Measure Group for any CUBE.
This actually facilitate business people to understand which dimensions mapped to which measure group.
I am unable to find solution for the problem while writing a Named Set in my cube.
I have a calculated measures which gives me difference in Sales in PERCENTAGE (%).
When I try to filter out those product codes which went a less than 5 %, I get no records.
I have also tried to filter direct values lets say - Products with sales > 100000 which is working fine.
Following is sample of my Named Set
FILTER([X].[Products Code].members, [Measures].[Diff in Sales]<5)
I believe as the values are in percentage, I am facing this issue.
I am pretty new to MDX and am having trouble getting what I need out of this MDX query. Some business rules:
Gross Amount applies to all clients, whether Type A or Type B. I always want to return Gross Amount.Some clients are Type A, some are Type B, some are both, and some are neither.There are Type A Net Amount and Type B Net Amount values for all clients, but I only want to display the Type A Net value if the client is a Type A client, only Type B if the client is a Type B, or both for both, and neither for neither. I would like to return blank/null, not $0.00, for those values that should not be displayed.
Here's the basic query.
SELECT { [Measures].[Gross Amount],
[Measures].[Type A Net Amount],
[Measures].[Type B Net Amount]
} ON COLUMNS,
NON EMPTY {[Dim Client].[Parent Client Code].[Parent Client Code] *
[Dim Client].[Child Client Code].[Child Client Code] *
[Dim Client].[Is Type A].CHILDREN *
[Dim Client].[Is Type B].CHILDREN
} ON ROWS
FROM ClientInfo
Here's the DESIRED output........
I'm using SQL-Server 2008, Visual Studio 2013. I've got created Linked Object (Linked Measure) in Cube2 from Cube1. Everything was fine, but I edited Measure in Cube1, as I found documentation there is no ability to refresh Linked Objects so I deleted and recreated Linked Measure on Cube2. After It I can't process Cube2, receiving following errors:
MdxScript(Cube2) (10, 24) The dimension '[Dim]' was not found in the cube when the string, [Dim], was parsed.The END SCOPE statement does not match the opening SCOPE statement.
For Example: I have one dimension named as "Name", Under this I have "FirstName" and "LastName" Attributes are there.But when i drag "Name" dimension, By default "First Name" dragged. But i Want "Last Name" should drag.
View 6 Replies View RelatedI have a dimension like Districts, Under that 2 Attributes are there i.e,District ID and Districts. When i drag Dimension "Districts", in OLAP grid it come District ID first. But i want Districts to drag first. How can we sort Attributes(District ID and Districts) for a dimension.
View 6 Replies View RelatedWhen I want to create a dimension i always end showing up errors below:
COPY
<Batch xmlns="http://schemas.microsoft.com/analysisservices/2003/engine">
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100"
[Code] ...
Errors and Warnings from Response
Internal error: The operation terminated unsuccessfully.
The following system error occurred:
Errors in the high-level relational engine. A connection could not be made to the data source with the DataSourceID of 'DB LAB2', Name of 'DB LAB2'.
[Code] .....
Microsoft E-Learning products are currently available for purchase only within North America at this time
Jezz, bad luck I am currently living in Spain...
I am designing a package performing some data imports from a text file to some tables, passing by a temporary table.
My specific requirements are:
initially the package checks if the input file exists, if it doesn't it will not continue.I have implemented this with a Script Task, and if the
file doesn't exist I fail the all package (Dts.TaskResult =
Dts.Results.Failure). Is this the right way?
after copying the data into a temporary table, it checks via SQL if some conditions are verified, if not it will not continue.I would have liked to do it via an SQL Task, but I don't know how to stop the package if the conditions are not what expected. Anybody can help?
Thank you.
This is stupid, I used to be able to do this all the time by mistake now I can't do it on purpose
I want to be able to return a full list of matching records when only one is true
LikeRow 1, ID_1, falseRow 2, ID_1, falseRow 3, ID_1, trueRow 4, ID_2, falseRow 5, ID_2, trueRow 6, ID_2, false
I currently getRow 3, ID_1, trueRow 5, ID_2, true
Hi all, I am trying to access a sql database and if the userid exists in the database to the let me query another statement within an IF block to check another statement within the data, however I cannot seem to get it to work. I need something like sql.row.count != 0 within the 2nd IF statement below. What can I do?Thanks in advance.Jason using System;using System.Configuration;using System.Data;using System.Data.SqlClient;using System.Linq;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls;using System.Web.UI.WebControls.WebParts;using System.Xml.Linq;public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } protected void btnStart_Click(object sender, ImageClickEventArgs e) { if (Session["userid"] == null) { Response.Redirect("accessdenied.aspx"); } else { //Response.Redirect("page1.aspx"); SqlConnection objConnect = new SqlConnection(System.Configuration.ConfigurationManager.ConnectionStrings["MyConnection"].ConnectionString); objConnect.Open(); SqlCommand cmd = new SqlCommand("SELECT user_id FROM users WHERE user_id = '" + Session["userid"] + "'"); if (cmd == true) { Response.Redirect("page5.aspx"); } objConnect.Close(); } }}
View 7 Replies View Relatedwhat does this imply Trusted_Connection=true parameter in the Connection String signify?
Secondly how can I make users with Windows Authentication Login to work in SQL Server Connection String?
Thanks in advance,
Neeraj.
hi
I just created a DB , & ran sp_dboption , it showed me that the trunc. log on chkpt. is true .....
What if i set the recovery model of this DB to full , would I be able to recover the DB to a specific point in time ,
or since trunc. log on chkpt. is true.. I would not be able to collec the transaction log backups ???
Cant understand this concept , need some link to read this stuff ....
Thanks
Hi,
we've got this problem with some particular jobs: they look as they
ran correctly, but actually they didn't made it all through their
duties.
The problem is that this job is calling a sequence of DTS, where there
is a DTS with an ActiveX control which modifies another DTS before
launching and some other tasks: the error happens there, .
Launched from the DTS we get the error, from the job no...any idea how
we could get the correct job information?
Thank you
Daniele
Hello all,
I am trying to migrate date from Oracle 10g to SQL serve 2005 during the data transformation I get the following error
Messages
Warning 0x80202066: Source - SERVICE [1]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
(SQL Server Import and Export Wizard)
I searched internet and solution seems to be setting AlwaysUseDefaultCodePath="TRUE"
But where do you do this ?
I found this too: It's on the Properties tab of the OLE DB Source in Custom Properties section.
But still do not know where to go to set this parameter
Please help
When accessing a web application from an intranet....
And the web app tries to make a connection to a 'SQL Server' using the sqlconnection where does ASP.NET grab user credentials?
My webpage displays web security.principal.windows.getcurrent = domainUser (displays the correct information).
But the connection to sql says Null. Where is ASP.NET grabbing (retrieving) this information from?
Thanks,