I am recently encountering proble with SSAS cube,In a day cube is going to offline for several time and unable to browse it and after some time automatically cube is getting online.I am unable to figure it out what is happening.
FYIP..For every 15 Min cube will be Proccessed Full.
I am thinking of a possible design where the cube will never go offline.
Usually when I do some code changes on my cube the cube goes offline and I need to Full Process it again to get it back .
However , in cases where the cube is extremely critical for the business users , it would be great if I can deliver a solution where the cube never goes down.
I am working on a model where I have a sales fact table. Each fact record has four different customer fields (ship- to, sold-to, payer, and bill-to customer). I have one customer dimension table that joins to the sales fact table four times (once for each of the customer fields above). When viewing the data in Excel, I would like to have four hierarchies (ship -to, sold-to, payer, and bill-to customer) within Customer.
Is there a way to build hierarchies within my Customer dimension based on the same Customer table? What I want is to view the data in Excel and see the Customer dimension. Within Customer, I want four hierarchies.
I have problems creating a cube with AMO.
I can add the cube to the database object and fill it with dimensions and a measuregroup (see code below).
If I call cube.Update() it says something like "Error in meta data manager. Cube has no measuregroups." (getting the message in german language)
The error in Microsoft.AnalysisServices.OperationException.Results.Messages is -1055653629
I can't find any documentation about this (or any other) error code in Microsoft documentation.
Here's my Code:
Cube newCube = database.Cubes.Add("MyCube","MyCube");
newCube.Language = 1031;
newCube.Collation = "Latin1_General_CI_AS";
CubeDimension dim = newCube.Dimensions.Add("dim1","dim1","dim1");
CubeAttribute attrib = dim.Attributes.Find("dim1Attr1");
[code]....
hello,
does anybody know how i could automate an offline olap cube, so that it will be updatet daily?
thanks chri
When I try to create an Offline cube from Excel 2007 I get the following error message. This used to work but I cannot figure out what to loo for.
Code Snippet
Microsoft OLE DB Provider for Analysis Services 2005 :
OLE DB error: OLE DB or ODBC error: XML for Analysis parser: The 'CreatedTimestamp' read-only element at line 1,
column 38747 (namespace http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Cubes/Cube/Scripts/MdxScript was
ignored.; XML for Analysis parser: The 'LastSchemaUpdate' read-only element at line 1, column 38803 (namespace
http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Cubes/Cube/Scripts/MdxScript was
ignored.; XML for Analysis parser: The 'CurrentStorageMode' read-only element at line 1006, column 4554
(namespace http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Dimensions/Dimension was ignored.; XML
for Analysis parser: The 'CurrentStorageMode' read-only element at line 1006, column 17325 (namespace
http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Dimensions/Dimension was ignored.; XML
for Analysis parser: The 'CurrentStorageMode' read-only element at line 1006, column 57387 (namespace
http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Dimensions/Dimension was ignored.; XML
for Analysis parser: The 'CurrentStorageMode' read-only element at line 1006, column 60047 (namespace
http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Dimensions/Dimension was ignored.; XML
for Analysis parser: The 'CurrentStorageMode' read-only element at line 1006, column 62847 (namespace
http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Dimensions/Dimension was ignored.; XML
for Analysis parser: The 'CurrentStorageMode' read-only element at line 1006, column 65497 (namespace
http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Dimensions/Dimension was ignored.; XML
for Analysis parser: The 'CurrentStorageMode' read-only element at line 1006, column 72718 (namespace
http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Dimensions/Dimension was ignored.; XML
for Analysis parser: The 'CurrentStorageMode' read-only element at line 1006, column 75425 (namespace
http://schemas.microsoft.com/analysisservices/2003/engine) under
Envelope/Body/Execute/Command/Batch/Create/ObjectDefinition/Database/Dimensions/Dimension was ignored.;
Errors in the metadata manager. The attribute hierarchy for the Month attribute cannot be created because a
hierarchy with the same ID or name already exists..
Can somebody advice my on what to look for? Thx!
The attribute hierarchy for the Month attribute cannot be created because a hierarchy with the same ID or name already exists. ----- There is no other Month?
Regards,
Dirk
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
SQL 2014...In SSDT, as I'm developing my tabular model I often add new columns to the underlying table/view that feeds my model. When I go into Table/Table Properties, select the new column I've added then hit OK it spins and spins then times out. My model has just over 1 million records. The only way I can get it to work is to delete the table and then add it in again.
View 2 Replies View RelatedI have a cube with some dimensions (dim1,dim2,dim3).I want to add another dimension (dim4) based on dim1 but more restricted.Eg. Dim1 is a product dimension, and I will create Dim4 from a subset of Dim1 (only few and predetermined products).
I will create a view (or a named query) with the appropriate where clause, create a dimension on this view/namedQ, then add on the existant cube and link it on dimension usage. Great. But in this way in the cube I haven't all fact data but only data for the product of Dim4! (Dim1 is still present).
eg: in fact data I have a total of 100$ of sales for all the products, if I link the Dim4 then the sales amount is 40$, that is the value for the product in Dim4 not for all product (I can't set the filter for Dim1/Dim4 in excel). I haven't found any way for get the 100$.
I try with two Date dimension: the first from 01/01/2010 to 31/12/2015 and the second from 01/01/2015 to 31/12/2015. If I link both I see only data for the second period (only 2015).
it seems that the more restrictive dimension trumps.What's wrong? There are other ways to get what I want? I've tried the property "DependOnDimension" but without results.
I won't publish the attribute used in the WHERE clause on the dimension.
BIDS 2008 and SQL Server 2008R2
I am doing some analysis on shifts and what I want to do is say if the time from a timestamp field is between 00:00 and 05:59 then the figures belong to the day before. Eg. We have a night shift that work 22:00 - 06:00.
Here is my coding which logically looks sound to me but when I run it, it has an error:
SELECTe.ID,
CAST(e.TimestampasDate)asEventDate,
CAST(e.TimestampasTime)asEventTime,
CASE
WHENCAST(e.TimestampasTime)BETWEEN'00:00:01'and'05:59:59'
THENCAST(e.TimestampasDate)-1
ELSECAST(e.TimestampasDate)
END
FROMIntouch.Event
Hi,
I was talking to my boss to day and our report request are not very consistant. We always having someone coming back to change something in our report. We were thinking of useing something called the Cube Analysis. Then it give our employees the raw data for them to run any standard query for themself. We have folks that want a report one way, but then they changed their minds and we are creating yet another report 4 or 5 times. what are your thoughts about this type of database?
I'm making my first attempt at creating a cube using Analysis Services based on my exisiting datamart. Datasource, views, and dimensions have been defined. But comes deploying the cube, it's giving the error saying "A connection cannot be made. Ensure that the server is running." The Deploy Target server and database are the same where my datamart is. Or, maybe I don't know what I'm doing.
Would appreciate any suggestion for my enlightenment. Thanks
I setup Hiarchy in the dimentions of my cube, however when I go and look at it via proclarity, I can't see the hiearchy there.
I have one table that has:
Category
Subcategory
Partnumber
And I have the hiearchy set from Subcategory to partnumber.
Then I go into proclarity and limit the category by "my catname" and I still see the 8000 partnumbers in the list.
Any ideas?
I have a (hopefully typical) problem when it comes to cube design. Westore millions of product records every year, broken down bymonth/quarter. Each product can be assigned to various heirarchialclassification groups etc. The data in an OLTP DB occupies roughly100G for a typical year.We're looking at breaking this out into OLAP to provide faster accessto the data in various configurations and groupings. This is not aproblem, as this is the intended use for Analysis Services.The problem is that we apply projection factors on the product pricesand quantities. This would be ok if it only happened once, however,this happens every quarter (don't ask why). The projection factorschange 4 times a year, and they affect all historical product records.This presents a challenge because to aggregate the data into a usefulconfiguration in the cubes, you throw out the detail data, but thismeans throwing out the price and quantities which are needed to applythe projection.So if you have Product A at $10 and Product B at $20, and roll both upinto Category X, you'll have $30, but you'll lose the ability to applya projection factor of .5 to Product A and .78 to Product B. They'rerolled up.I don't want to regenerate the cubes every 3 months. That's absurd.But we can't live without the ability of projection theprices/quantities on a product level (detail level). So how can thisbe achieved when the other cubes are created at a higher level withless details and sums of the detail data?My initial guess is that we have to update the product data, and thenreaggregate all the other data that is built upon that product data.Is there any other way to apply math to the data on the way out?Thanks in advance!Regards,Zach
View 2 Replies View Relatedi want to create cube withe 2 fact tables. is it possible?? if it is could you show me how !!
View 2 Replies View Relatedhow can use this mdx script in the calculation part of a cube, will i simply dump it in the script form by starting with the 'create member current cube.
[measures].[test]'
select
[measures].[abc] on 0,
[xyz].[xyz].(&0):[xyz].[xyz].(&60) on 1
from
(
select
(tail([month].[month].[month].members,6))on 0
from
[cube])
The data attached below is from a Fact table. When this data is browsed in the Cube the end user is only interested in value of Measure 1 when it is not equal to zero. Measure 1 is a base measure .how to suppress the value 0 for Measure 1 in the Cube.
DimesionKey1
DimensionKey2
DimensionKey3
Measure 1
Measure 2
Measure 3
[code]...
I know where the data files are etc, but what is the physical structure of a cube like on disk?
Logically we see the data as a star. Is the physical file akin to a star also? Or is a single file a measure group containing all the required member and measure data - thereby eliminating the need for physical join operators.
I am planning to implement the security in my cube..
Total sales is 1000..
Customer Sales
A 100
B 200
C 300
D 400
Total Sales 1000
When i want to give access to the customer A, he can capabule of viewing only A value 100... But the problem is A is able to see total sales 1000.. How can i restrict the sales a value to 100 in the cube.. Where i have to set the property to fix this issue.....
Is it correct to say that for each cube you can have only one Fact Table? I am having a funny dispute just now.
According my experience I never built cubes with more than one fact table, if I want take data from more than one table I write a view and I use it as Fact table...but a cube with two or three fact tables? Never tried..
i am currently trying to build a distinct count on my cube (mssql2005 analysis services).But after i added the discount count on the field i want to and start the processing, the following errors appear.Errors in the OLAP storage engine: The sort order specified for distinct count records is incorrect.
View 17 Replies View RelatedI have a cube. Its xml is different at some point than its design view. Suppose for some dimension and its attributes, source table is different than what it showing in the properties window for them..
Is this possible? How to read cube xml because there are repeating tags in it. There are two type if dimension tags.. one has only attributed and other has all properties.
Is it possible to have more than one cube under one SSAS database? For example I have a database "Test" and in this the cube exist is "TestCube", is iit possible to deploy another cube "TestCube2" under the Test databse?
If yes then what is the process to do that, the reason I am asing is there are some common dimensions used n both the cubes and I am not sure what is the best way so that I can use the shared dimension?
How can we select translated text of cube translations, like measures, dimensions, dimension attributes. I have below query which return translations of dimension attribute's memebers
WITH
MEMBER Measures.CategoryCaption AS Product.Category.CurrentMember.MEMBER_CAPTION
MEMBER Measures.SpanishCategoryCaption AS Product.Category.CurrentMember.Properties("LCID3082")
MEMBER Measures.FrenchCategoryCaption AS Product.Category.CurrentMember.Properties("LCID1036")
SELECT
{ Measures.CategoryCaption, Measures.SpanishCategoryCaption, Measures.FrenchCategoryCaption } ON 0
,[Product].[Category].MEMBERS ON 1
FROM [Adventure Works]
I am getting translations of product category members but I want to get translated text of "Category"?
I am trying to query the Topics in my discussion forum...The Topic contains a "last_poster_id" and a "author_id" I need the username and userid for both "last_poster_id" and "author_id" in the table "aspnet_Users"How do I do this?I would guess I need to use sub select statements. Can someone help me?
View 12 Replies View RelatedIf there are any AS gurus out there, I could use some help. I've been having some problems with particular AS dimension and cubes and it's driving me crazy! It doesn't matter what I do, nothing seems to work.
Anyway, here's what I'm trying to do. I've got a fairly simple dimension. There is a date stored in the dimension that is formatted as an int. The dimension needs to only display AGE, so I cast the int as a date and do a datediff to get AGE. The dimension builds just fine and I get the results I want. My problem is when I add the dimension to the cube. The cube fails to build and I get an error message - "Data source provider error: The column prefix 'MY TABLE' does not match with a table name or alias used in the query." Basically, AS is telling me that the table that is used for the dimension doesn't exist, even though the fact and the dimension are joined properly and I've validated the structure.
I've run a number of queries in QA on the two tables and everything works fine. No funky data issues. I've run the service packs a few times, but that didn't work either. I've tried making a cube that only has the just fact table and the one dimension table, and it still fails.
Basically, I'm out of ideas. Any help that anyone has is greatly appreciated.
I have designed a cube. It has two fact tables and some dimensions. Fact table to fact table is many to many relationship.
For example
FactMain
DataKey(PK), StartDateKey, PostCodeKey, TotalCost
FactBridge
DataKey(FK), ProductKey(FK), Position - PrimaryKey on DataKey + ProductKey + Position
DimProduct
ProductKey(PK), ProductCode
Cube is built successfully, processed successfully.When I try to process the cube from agent job, I am getting error "Attribute key not found: tablename, value..." I have added a job step to run AnalysisServices Command. I have taken the command from cube process script(taken from manually process the cube and take script generated). I used ProcessAffectedObjects = "true" in the script. When I checked the tables, the key does exist. Why am I getting this error?
I have a TEST database which contains 1 cube.
I have created another cube and I want to add this cube to the TEST database also.
However when I deploy the cube it overwrites the database with the new cube and the old cube is gone.
How can I have the 2 cubes within the TEST database.
I want to implement population data in sales cube.
Fact table has customer code which is foreign key of Customer master dimension which in turn is linked to census data dimension. Census data dimension have city wise population data having foreign keys of zone and state.
We want to add population data in fact table.
I have been trying to get the ValueR column of the following query through the MDX but instead getting ValueW as output of the MDX
select
exp(Log(sum(MTMROR)+ 1 ))-1 as ValueW,
exp(sum(Log(MTMROR + 1)))-1 as ValueR
from
Temp_Performance
where Rundate in ('2015-03-01','2015-03-02')
MDX written for the above query is
With
Member [Measures].[LogValuePre]
as ([Measures].[MTMROR] + 1)
Member [Measures].[LogValuePre1]
as VBA
[Code] ...
[MTMROR] measure has the aggregate function Sum. What i can get from this behavior is MDX is first aggregating the result and default aggregation function is Sum. When i try to see the value with more granular data by having the date dimensions on the row (un-commenting the date dimension) i get the correct log and exp log values. Its showing the correct value as date dimension is most granular level in the fact table. While trying to get the data at less granular level(Fund level), getting the sum function applied automatically.
If i set AggregateFunction to none in the cube structure, i get null as the output.
How could i apply the log function before the sum function in the [MTMROR] measure?
I am in process of automating a cube migration from SSMS 2008 to SSMS 2012.
In this process iam deleting the existing cube databases and restoring them on a different location on the same server.
When i try to execute the restore command or restore using UI i get a wierd error message like this below:
"TITLE: Microsoft SQL Server Management Studio
------------------------------
File system error: The following error occurred while opening the file 'DrivePath3F9D4D128D5E417FA6F2[CUBEDBNamepath].fact.map'.
Server: The current operation was cancelled because another operation in the transaction failed.
(Microsoft.AnalysisServices)
[Code] ....
I have a .abf file, which I am attempting to restore. I go to Management Studio and attempt to restore the cube.
However, whenever I attempt to restore the following error message occurs:
"File 'C:/.......' specified in restore command is damaged or is not an AS backup file.
The following error occured:
Access is denied (Microsoft SQL Server 2008 R2 Analysis Services)
Best way to print Dimension Usages with Measure Group for any CUBE.
This actually facilitate business people to understand which dimensions mapped to which measure group.