I have a requirement where I need to show the maximum value in grand totals but for the dimension members the same measure has to sum.
For ex: lets say I have a measure called Test and this is a base measure. The aggregation type set to this is SUM.
For this same measure the grand totals should not show the sum instead it should show the maximum value of the dimension members which is being analyzed across.
If user want to see the grand total for a measure with include all members, even though the user has limited access for that member, so how we can do using DAX?For example, let’s say the total revenue for all the divisions in a cube is $15,000. You create a role called “Division A”, and set it up so members of that role can only see the revenue for Division A, which totals $3,000. If you use a front-end tool like Excel to access the cube and use the division hierarchy to see the total revenue, you will see the revenue of $3000 for Division A, but also want to see the Grand Total for the revenue as $15,000How we can achieve above scenerio in tabular model (DAX).
View 3 Replies View RelatedLet's have a table to show what I mean ...
As you can see I have added only one contract (for the sake of simplicity). At any given date I want to calculate the running total for a contract (all contracts), but the aggregation must take the contract state into consideration.
You can see my expected result for queries 1 - 3. That means, with the actual state ('B') I want to aggregate all values regardless of their state in the past.
For query 2 the state is 'A' ... I hope you can follow.
Now my aim is to aggregate all contract states for any given date with the right value. The past states of each contract are not relevant. And of course future ones (with respect to the query date) shall also be irrelevant.
Maybe the solution is a combination of 'LastNonEmpty' and SUM/PERIODSTODATE ...
Hello All,
I've created a report that has a count of dates reports. Every company has at least one date report. I've group the report by company and did a count this works find. Now I want to SUM up this field and put it at the end of the report.
I've used =sum(reportitems!textbox10.value) but it only works at the page footer. And only give me a grand total for that page. I want a grand total for the whole report. Is there a report footer???
Thanks
Set_Shot_Dave
I need to get the Grand Total of the results of this query.
The query pulls the total customer quotes for each community in a management company and loads my DataGrid:
This query works fine for individual community totals"SELECT TOP 100 PERCENT vcName, COUNT(DISTINCT vcCustId) AS " & _
" Total FROM dbo.PropReportData WHERE cManagementCo = '" & Session("MgmtCo") & "' and " & _
" (vcEntryDate >= CONVERT(DATETIME, '" & StartDate & "', 102)) AND " & _
"(vcEntryDate <= CONVERT(DATETIME, '" & EndDate & " 11:59:59 PM" & "' , 102))GROUP BY vcName ORDER by vcName"
At first glance you would think that the following query would return the Grand Total for all communities in the management company:
Current Grand Total Query"SELECT COUNT(DISTINCT vcCustID) As gTotal FROM PropReportData WHERE
cManagementCo = '" & Session("MgmtCo") & "' AND vcEntryDate >= '" & Session
("StartDate") & "' AND vcEntryDate <= '" & Session("EndDate") & " 11:59:59 PM' "
But here's the problem. If there are multiple customer quotes created for different communites, then the customer(vcCustID) is only counted once in the Grand Total Query because I have to use DISTINCT, which of course only picks up one instance of the customer.
Thanks in advance.
I have two subreports (Revenue and Expense) that each have subtotals.
This works just fine, but I need a Grand Total that would sum the two subtotals.
How would I go about doing this?
So it looks something like this:
Revenue Report (matrix)
Subtotal
Expense Report (matrix)
Subtotal
<~~~~ Need Grand Total here.
Hi All,
My doubt is, how to get gand total in SQL Reporting Services2005 for the following scenario?
Sample report content:
CustomerId Product Name Price
123 Apple $100.00
Orange $77.00
SUB TOTAL $177.00
124 Apple $105.00
Orange $70.00
Olive $450.00
SUB TOTAL $625.00 // sum(Fields!Price)
GRAND TOTAL $802.00 //How to get Grand total? please..
Regards,
Pragash
Hi,
I am trying to calculate grand totals in the table footer area on a single table report. The report table has a grouping with a filter. I want the grand total to sum the visible grouping data but instead it sums the entire dataset. I've tried summing the textbox but RS does not allow that from the footer. I've tried specified the group for the scope but apparently RS scope works outward not inward in regards to groups. A simple example of my problem might be a list of bank accounts whose balance is overdrawn. In the report you want to show only the accounts whose balance has gone negative and all the transactions for those accounts. You can create a group on the account field and then a filter on the group to sum the transaction amount and filter out the accounts whose sum is not below zero. The grand total would supposedly sum the accounts whose balance is negative. Unfortunately the sum is on the entire dataset and therefore includes accounts with good balances. I'm sure some will suggest changing the SQL but that is not an option for me. These seems like a very basic operation for a report writer so I'm guessing there is some easy way to do this that has eluded me. Thanks for any help.
How to calculate grand total in sql server using pivot?
View 1 Replies View RelatedHi,
Im using Access and have created a query which adds up the grand totals of clients orders. However i want to be able to add up what each client has spent in total over any given time period. Basically in SQL logic terms:
take all order totals from same client and add together order totals to produce a grand client spend total.
Anyone help!?
thanks
how to add group subtotal and grand total in report? i try to add formula Sum(Field!Net_Weight.Value) in group footer and unable repeat footer on each page, it return same total on every pages. I hope to get subtotal on each page by group. the expected result would be like this:
Page1
1.Group 1
Date
D/no
Net Weight
6/1/2007
A00000100
10.45
6/1/2007
A00000101
10.95
6/1/2007
A00000102
11.45
6/1/2007
A00000103
11.95
6/1/2007
A00000104
12.45
6/1/2007
A00000105
12.95
Subtotal
70.2
Page 2
Date
D/no
Net Weight
6/1/2007
A00000100
20.15
6/1/2007
A00000101
20.25
6/1/2007
A00000102
20.35
6/1/2007
A00000103
20.45
6/1/2007
A00000104
12.45
6/1/2007
A00000105
12.95
Subtotal
106.6
Grand Total=
176.8
2.Group 2
Date
D/no
Net Weight
6/1/2007
A00000100
10.45
6/1/2007
A00000101
10.95
6/1/2007
A00000102
11.45
6/1/2007
A00000103
11.95
6/1/2007
A00000104
12
6/1/2007
A00000105
12.95
Subtotal
69.75
anybody know how to do it?
Hi All,
I have to create a table like this using SSRS.
LoanStatus NoOfLoans Amouunt Percentage
Started
1,000
1,000,000.00
100%
Sent to Partner
350
350,000.00
35%
Denied by Partner
50
50,000.00
5%
Accepted by Partner
300
30,000.00
30%
Loan Apps Pnd Disb
10
100,000.00
1%
Loan Apps Disbursed
290
290,000.00
29%
Table is grouped by loan status.
Percentage is calculate as NoOfLoans/TotalNoOfLoans.
Please can anyone tell me how to calculate the grand total and Percentages?
I've been messing around with ROLLUP but have got nowhere,I have this:
DECLARE @sql NVARCHAR(MAX)
DECLARE @pivotsql VARCHAR(MAX)
DECLARE @columns VARCHAR(MAX)
DECLARE @selectlist VARCHAR(MAX)
[code]...
which works a treat - I just need a grand total at the bottom for each column.
I have a SP that will generate a pivot output. I want to add a grand total at the end row to sum up the counts for each column.
the SP is as below :
/* COLUMN HEADERS*/
DECLARE
@columnHeaders NVARCHAR (MAX)
SELECT
@columnHeaders = COALESCE ( (@columnHeaders) + ',[' + [Date] + ']', '[' + [Date] + ']')
[code]....
I am getting the below error:
Invalid column name 'Grand Total'.
Msg 205, Level 16, State 1, Line 16
All queries combined using a UNION, INTERSECT or EXCEPT operator must have an equal number of expressions in their target lists.
My FactEmployeeTable showing 13 rows of data related to employees, but i used a bridge table for connecting project and employee dimensions. In the ProjEmpBridge table i mapped only 6 employees data to the proj's data. When dragging projet name and employee name it is showing data related to 6 employees but grand total showing 13 as the result. I dont know why it is showing 13 instead of 6. Can anyone please solve this issue.
Hi There i have a Report That Display's data in following format
Areas
Code | Descirption | Emirates | GCC | ASIAN | OTHER ARABS | so on..
1 What ever 3 0 2 1
2 ABC 0 0 1 0
-------------------------------------------------------------------------------------------
Total 3 0 3 1
The Areas are Matric Columns and are dynamically generated .
i dont want sub total of each row , but i want Grand total at the end of the all columns generated by matrix
I have no clue how do to it
Kind Regards
Hi,
Hi All,
I am having some trouble getting a Grand Total column at the end of my matrix report (not row at the bottom), such as you get by default in an Excel pivot table.
I have managed so far to add another column that sums up all values across the data range for a particular product code. My intention was to hide all but the last (I did something similar on rows). However you cannot use an expression on the width property for columns, so this will not work.
My report is very standard:
Year
Month (grouped by year)
Product code | Description [qty]
I want a column that displays the total qty across all dates for each row. Surely this is possible?
Any suggestions would be appreciated! Thanks.
Hello,
I have a DB of professors and information related with them. I created the cube, it consist of:
Measures:
Measure group Professors:
Amount of projects (COUNT proj_id)
Amount of pulications (COUNT pub_id)
Amount of e_books (COUNT book_id)
--------------
Measure group Projects:
Distinct amount of projects (DISTINCT COUNT proj_id)
--------------
Measure group Publications:
Distinct amount of publications (DISTINCT COUNT pub_id)
--------------
Measure group E_books:
Distinct amount of e_books (DISTINCT COUNT book_id)
--------------
Calculated measures:
Amnt_Projects
iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects])
Amnt_Publications
(similar to the above one)
Amnt_E_books
(similar to the above one)
---------------------------
Dimensions:
dimPROFESSORS
- prof_id
-surname
-name
-gender
dimPROJECTS
- proj_id
-type name
-name
dimPUBLICATIONS
- pub_id
-type name
-name
dimE_BOOKS
- book_id
-name
Date_Projects
-date_id
-years
Date_Publications
-date_id
-years
Date_E_books
-date_id
-years
For example, when I browse the cube:
prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects
1032------------------- 30 --------------------------1----------------1
1070-------------------90 --------------------------2----------------2
1111-------------------0 ---------------------------1----------------0
1137-------------------0 ---------------------------1----------------0
1234-------------------1404--------------------------9----------------9
1721-------------------504--------------------------7----------------7
2661-------------------85 --------------------------5----------------5
...--------------------...---------------------------...----------------...
6999------------------- 20---------------------------1-----------------1
9956-------------------50---------------------------5-----------------5
Unknown----------------(empty)---------------------(empty)-----------0
Grand Total------------ 2421------------------------11-----------------11
Grand Total 11 is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be 59 if for all professors). How could I get the right value to be shown in Grand Total?
Hello,
I am using SQL Server 2005. I have a DB of professors and information related with them. I created the cube, it consist of:
Measures:
Measure group Professors:
Amount of projects (COUNT proj_id)
Amount of publications (COUNT pub_id)
Amount of e_books (COUNT book_id)
--------------
Measure group Projects:
Distinct amount of projects (DISTINCT COUNT proj_id)
--------------
Measure group Publications:
Distinct amount of publications (DISTINCT COUNT pub_id)
--------------
Measure group E_books:
Distinct amount of e_books (DISTINCT COUNT book_id)
Calculated measures:
Amnt_Projects
iif ([Measures].[ Amount of projects ] = 0 OR [Measures].[ Amount of projects] = NULL,0,[Measures].[ Distinct amount of projects])
Amnt_Publications
(similar to the above one)
Amnt_E_books
(similar to the above one)
---------------------------
Dimensions:
dimPROFESSORS
- prof_id
-surname
-name
-gender
dimPROJECTS
- proj_id
-type name
-name
dimPUBLICATIONS
- pub_id
-type name
-name
dimE_BOOKS
- book_id
-name
Date_Projects
-date_id
-years
Date_Publications
-date_id
-years
Date_E_books
-date_id
-years
For example, when I browse the cube:
prof_id____Amount of projects___Distinct amount of projects___Amnt_Projects
1032------------------- 30 --------------------------1----------------1
1070-------------------90 --------------------------2----------------2
1111-------------------0 ---------------------------1----------------0
1137-------------------0 ---------------------------1----------------0
1234-------------------1404--------------------------9----------------9
1721-------------------504--------------------------7----------------7
2661-------------------85 --------------------------5----------------5
...--------------------...---------------------------...----------------...
6999------------------- 20---------------------------1-----------------1
9956-------------------50---------------------------5-----------------5
Unknown----------------(empty)---------------------(empty)-----------0
Grand Total------------ 2421------------------------11-----------------11
Grand Total 11 is the amount of distinct projects +1 (because of the unknown member). So the last column shows the right amount of projects for the professor but I want Grand Total to sum those values and show, how many projects do the professors have (it should be 59 if for all professors). How could I get the right value to be shown in Grand Total?
Hello Guys,
I am working on a matrix report which has several row groups and 1 column group. After execution, the column group wil end up with several columns containg numeric counts. I would like to have the grand total for each "column group" column as a last row on this report.
For row groups you can just right click "Subtotal", but that is not possible for column group. Could someone please help me to find a clever way of accomplishing this, please. Thank you so much for your help!
HI,
In my cube I have defined a role where thet user can only browse certain dimention value. BUt in grand Total the result showing is for all the diemnsion values.
for example The user restricted to browse only Australia and UK Country , But in grand total its showing the SUM of all the country.
Any help will be appreciated.
Thanks
I have a script that produce a result set that is almost complete. I have a new requirement come up to put a Total at the button of the result set of my Query.
I'm using SQL Server 2008
;WITH CTE AS
(
SELECT
Case WHen left(MONTHDate,3)='Jan' Then '01'
WHen left(MONTHDate,3)='Feb' Then '02'
WHen left(MONTHDate,3)='Mar' Then '03'
WHen left(MONTHDate,3)='Apr' Then '04'
WHen left(MONTHDate,3)='May' Then '05'
[code]....
I've created a measure counting instances of unique identifiers utilizing the following formula. However, the Grand Total does not equal the sum of the sub-totals.
=CALCULATE(COUNTROWS(DISTINCT('Rawdata File'[Identifier])),ALL('Rawdata File'[Identifier]))
Hi,
I've created a calculated measure which is a division between 2 other measures which i also have displayed in the cube.
of course as soon as there is some level of aggregation, the shown result is an averaged division and therefore is wrong.
here is some example:
A 16874
B 956
C 1354
D 264
E 103
F 81
G 6
H 3
X 23
Total 5198.36...
here the wanted result would be a simple some of all the other values (=19664)
How could i treat totals/aggregation differently or have any good way of solving this issue?
I know there is the aggregatefunction propertie for normal dimension, but i'm not familiar with calculated measures and it seems properties that can be accessed through BIStudio's interface is rather limited.
thanks a lot in advance for your help. I've been looking for tweaks on the data to trick the cube, but couldn't find any way of getting the result i'm looking for.
Hi,
I'm using sql server analysis services 2000, i have a problem with grand total when i select more than one member of any demension. the measure of this cube is built on a distinct count agregation function. i have only one measure in th cube
can some body help me !!
is it possible to separate Grand Total of a sub group to a new page?
I tried using advanced mode, find the first line the Grand Total section and set its "RepeatOnNewPage" to true, but, when I execute the report, it will throw an error something like the value of RepeatOnNewPage of the TablixMemeber must be the same as its previous object.
I need my report pages to separate by subGroup(SubGroupA, SubGroupB, A+BTotal).
I have a calculated measure. On a particular dimension I want to hide the grand total. for remaining dimension grad totals to be visible. Like the below screen shot ....
View 4 Replies View RelatedMy Power view reports do not show the grand totals correctly. I think my issue relates perfectly to [URL]. However we have updated service pack 2 on both the sql data warehouse and the ssas box. They are 2012. However the power view is still incorrect. Pivot tables seem to work just fine. In AS I have a 2 separate measure groups that has a total count. I then use mdx to bring those two together. Something I have done many times in past with as 2008. My mdx looks like this below. I then hide Total Count EC (from measure group 1) and Total Count SF (from measure group 2). This way I have 1 total count value and they can use another dimension to see the two separate if needed.
CREATE
MEMBERCURRENTCUBE.MEASURES.[Total
Count New] AS
//
([Measures].[Total Count] + [Measures].[Total Count SF]),
DISPLAY_FOLDER
=
'Totals',
ASSOCIATED_MEASURE_GROUP=
'Report',
FORMAT_STRING
=
"#,#0",
VISIBLE=
1;
The measure Total Count EC works just fine but the Total Count (MDX) does not . All in Power Pivot works fine but in Power View the grand totals are not correct.
I need to list customers in a table that represents sales over the years.
I have tables:
Customers -> id | name |...
Orders -> id | idCustomer | date | ...
Products -> id | idOrder | unitprice | quantity | ...
I am using this SQL but it only gets one year:
SELECT customers.name , SUM(unitprice*qt) AS total
FROM Products
INNER JOIN Orders ON Orders.id = Products.idOrder
INNER JOIN Customers ON Customers.id = Orders.idCustomer
WHERE year(date)=2014
GROUP BY customers.name
ORDER BY 2 DESC
I need something like this:
customer | total sales 204 | total sales | 2015 | total sales (2014 + 2015)
--------
customer A | 1000$ | 2000$ | 3000$
customer B | 100$ | 100$ | 200$
Is it possible to retrieve these values in a single SQL query for multiple years and grand total?
how can use this mdx script in the calculation part of a cube, will i simply dump it in the script form by starting with the 'create member current cube.
[measures].[test]'
select
[measures].[abc] on 0,
[xyz].[xyz].(&0):[xyz].[xyz].(&60) on 1
from
(
select
(tail([month].[month].[month].members,6))on 0
from
[cube])
I have created SSAS package successfully.
When I try to connect from excel , to SSAS Getting error message like
A Connection attempt failed because the connected party did not properly respond after a period of time or established connection failed because connected host has failed to respond.
If I connect to SSIS , I'm able to connect correctly.
Why I'm getting this error and how to overcome this?
I've see twice this year two different companies either already or planning on having ssas and ssrs running on the same server.
View 7 Replies View RelatedI am doing workload analysis on SSAS - Tabular (2012), I have perfmon logs captured and want to run through PAL. I am looking out for threshold file for SSAS tabular 2012/2014.
View 2 Replies View Related