In my fact table (month granularity), I've got a calculation defined:
Margin%=DIVIDE(SUM(Margin);SUM(SalesAmount))
How should I define a calculation based on "Margin%", so that if I browse the Pivot Table by months it would always show the year level result instead? My date dimension is also with Month granularity and it has a Year column in it.
Just wanted to know is there any way to write scope statements only for a specific role in the cube.
View 3 Replies View RelatedWe have two measures
[Measures].[NSPO]
is in FACT1 Measure Group
[Measures].[NetSignedPremium] is in FACT2 Measure Group
The requirement is Measure.[NetPremium] should be the greater of
[Measures].[NSPO] OR [Measures].[NetSignedPremium].
All three measures are created in the cube and this logic is to be applied in the Calculations section of the cube.
Using an IIF statement like one mentioned below does the job, but data does not aggregate correctly for the
Measure.[NetPremium]
Measure.[NetPremium] = IIF ([Measures].[NetSignedPremium] > [Measures].[NSPO], [Measures].[NetSignedPremium] , [Measures].[NSPO])
To ensure that the columns are aggregated I have to use a SCOPE statement at the leaf level
[01 UWR Reference].[UWR Reference].Members
SCOPE(
FILTER( NONEMPTY( [01 UWR Reference].[UWR Reference].Members ) ,
( ( ([Measures].[Net Signed Premium Rcvd])
- ( [Measures].[NSPOTest] ) )
< 0 ) )) ;
This = [Measures].[Net Signed Premium Rcvd] ;
END SCOPE;
My problem is the FILTER within the SCOPE statement does not work. How to modify the filter in SCOPE? OR How to make IIF Aggregate correctly?
I'm trying to do a currency conversion with an MDX statement in my Cube SSAS 2012.
Here is my script :
SCOPE( LEAVES([Entity]) );
SCOPE( LEAVES([Time]) );
SCOPE( LEAVES([Currency]));
SCOPE( [Account].[Account].[Total ACCOUNT].members)
THIS = ([Measures].[Value],[Currency].[Currency].[Local])*([Measures].[Value],[Account].[Account].[Fx Rate]);
END SCOPE;
END SCOPE;
END SCOPE;
END SCOPE;
The problem is I want to exclude frome the scope Currency my local Currency in order to make the conversion only if a currency (€,$, £) is selected. I tried the following syntax but it always return a "MDX script is not valid" :
SCOPE( LEAVES([Currency], Except (LEAVES([Currency],[Currency].[Currency].[Local]);SCOPE( [Measures].[Value] , Except ([Currency].[Currency].members,[Currency].[Currency].[Local]);SCOPE( [Measures].[Value] , Except (LEAVES([Currency],[Currency].[Currency].[Local]);SCOPE( LEAVES([Currency] - [Currency].[Currency].[Local]);
I am stuck in a situation where I want to use YTD for three different calendars of our company and don't want to create three different YTD calculations. However I want to make this work for any measure not for a particular measure
If I create one YTD and try to use in context of three calendars in SCOPE statements then it does not give my right results. Following is my syntax but It does not work.
SCOPE([Billing Date].[SalesCalendar].MEMBERS);
( [Aggregate].[AGGREGATE CODE].[YTD] )
= Aggregate({[Aggregate].[AGGREGATE CODE].DefaultMember}*{PERIODSTODATE([Billing Date].[SalesCalendar].[Sales Calendar Year],[Billing Date].[SalesCalendar].CURRENTMEMBER) } );
[Code] ....
However if I comment on one of SCOPE statement , other one works but both don't work simultaneously in context of different calendars.
Problem setting is a geography dimension with multiple user defined hierarchies in SSAS 2008.
Ex.:
Hierarchy 1 (political territory): level 6 --> level 5 --> level 4 --> level 3 (state) --> level 2 --> level 1
Hierarchy 2 (sales territory): level 4 --> level 3 --> level 2 (sales region) --> level 1
...
Hierarchy 9
The relationship between state and sales region is n:1, i.e. one state belongs to exactly one sales region, and one sales region can consists of one or multiple states. Unfortunatly I can't define this attribute relationsship in the dimension because it would lead to a diamond-shaped relationsship without a user-defined-hierarchy to back it up. So far that isn't much of a problem, user don't drill down from sales region to state. But now I want to define a calculated member that multiplies a measure from the main measure group with another measure from a weighting factor measure group at the state level and above. The granularity attribute of the geography dimension in the dimension usage tab of the weighting factor measuregroup is the state.
So far what I've got is:
CREATE MEMBER Currentcube.Measures.[weighted measure state and above] AS NULL;
SCOPE (Measures.[weighted measure state and above],
Descendants(geography.[political territory].[all member],3,SELF_AND_BEFORE),
Descendants(geography.[salesterritory].[all member],2,SELF_AND_BEFORE),
... Descendants(geography.[hierarchy 9].[all member],1,SELF_AND_BEFORE)); this = sum(existing(geography.[political territory].state.members), measures.[main measure group measure] * measures.[weighting measure group measure]);END SCOPE;
This works from a functional point of view, but is rather slow when querying any other hierarchy than the political territory hierarchy, because SSAS first goes down from the state level to the key attribute of the geography dimension, and then aggregates from there to the sales region.In other words, I want SSAS to resolve the relationsship (which state belongs to which sales region) through the dimension, and not through the fact, and apply the calculation afterwards. Like some kind of currency conversion, but only from a certain level upwards.
There is a way to get the non empty max calendar quarter of the year and the last year. For example, the max calendar quarter of the last year should be 4, and in this moment the max quarter of this year should be 3.
I am building a report in SSRS and trying to avoid query the DWH database. I want to run every query against the cube.
I create a Dimension Date using SSAS 2008 but when i execute the dimension and i go to see the result i have this result:the result is not sorted..what i need is having the result order by year i mean i have Calendrier 2020,Calendrier 2019 ...
View 6 Replies View RelatedI am struggling to calculate Full year in my SSAS Cube. Meaning, regardless of what fiscal year hierarchy level I am in; i need a measure aggregating from 01/01/year of current member to 12/31/year of current member.
I want to replicate it using the Year To Date below:
FY-FQ-FM is the fiscal year quarter hieararchy
I am using for built in time intelligence.
Create Member
CurrentCube.[DimTime].[FY-FQ-FM DimTime Calculations].[Year to Date]
As "NA";
/*Year to Date*/
(
[DimTime].[FY-FQ-FM DimTime Calculations].[Year to Date],
[Code] ....
I've got measure a in one table and measure b in another table and calculation a*b.
a b calc
2 4 8
5 2 10
SUM 7 6 18
How to get 18 as total instead of 7*6=42. I'd like to get row level calculation to sum up for the total level...
I have a set of data and calculated already the average of a specific measure, incl. the Standarddeviation of this measure. Now I want to create a average measure of the values on row level which arehigher than [Avg]-[StdDev] AND lower of [Avg]+[StDev].As far as I understand I have to check on Rowlevel, which means on Date and Brand Level, if the value of the measure is above or lower than the Mean +/- StdDev.
SUM( FILTER( {[Dim 1].[Attribue].&[selected]},[Measures].[Fact Survey Count] > [Measures].[Mean + 0,5 StDev] AND [Measures].[Fact Survey Count] < [Measures].[Mean - 0,5 StDev] ),[Measures].[Fact Survey Count])
which leads to a wrong result. This one counts all rows if true.With Descendants I got a #Value-Error, probably because I did not understand how the calculations work. I planned to include this in a IIF calculation.
SUM( Descendants(
{[Dim 1].[Attribute].&[selected],
[Dim Date].[Date].[Date].CURRENTMEMBER}, Leaves), [Measures].[Fact Survey Count])
I have a date dimension set in the SSAS Cube. I have been trying get quarter,year,month,semester start and end dates using ClosingPeriod() and OpeningPeriod() functions but not getting the exact value. How the get correct dates for a given date.
View 2 Replies View Related
I have taken three dtsx files and re written them into one each in its own container. I use the XML Task task alot which the File connection is set by a variable and the variable value is evaluated by expression (the expression makes up the path/filename from other variable values). All the variables that make up the connection are at the container scope. The package will not run now because it is saying that the source (created by variables) for the file connection do not exist.
It seems the answer is that file connections exist at the package level therefore the variable has to be at the package level. This seems to be alot of variables i now have to move to package level to generate the XML source connection. Which in essence makes it confusing as to which variables operate in which container.
My question is can we easily move variable scope (Not ideal as we have alot of variables at package level) Or Can we do the same for connection managers as we do for variables and have them only used in a scope? (this will be ideal as some connections only need to be at a container scope)
I am Using following MDX Query to get the data for max date in the Dimension. But every time I am passing date key to dimension to get data. How to automatically get the Max available Level member for that dimension.In this case I am passing 20150429 to every line instead i need to get that automatically.
SELECT
(
{
[DimDate].[HierYQMD].[Date Key].&[20150429],
{[DimDate].[HierYQMD].[Date Key].&[20150429].PARENT.PARENT.PARENT.LAG(4):
[DimDate].[HierYQMD].[Date Key].&[20150429].PARENT.PARENT.PARENT},
[code]....
The all-level of dimensions doesn't show up in the PivotTable Field List? I have reports where I want to show one member of a dimensions compared to the total of the dimension (and not the total of the members shown). But I can't select the ALL-level. Is there any way to do this?
View 5 Replies View RelatedAt the 2nd level, the calculated measure will only be correct if it is Averaged. And at the 1st level, the calculated measure will only be correct to take these Average value from 2nd level and Sum then up together.
Level 1 Level 2
A
X1
X2
=================
(Avg of X1 + X2)
B
Y1
Y2
Y3
=================
(Avg of Y1 + Y2 + Y3)
===================================================
(Sum of (Avg of X1 + X2) + (Avg of Y1 + Y2 + Y3) )
Currently, Instead of summing all the 3 averaged value, it is averaging against all the items like,
(Avg of X1 + X2 + Y1 + Y2 + Y3)
My MDX currently looks something like that
[Measure].[Value] / [Dimension].[Attribute.count] -> so i can get the avarage at the 2nd level but it doesn't require on the 1st level but retaining this value.
How can i do an average on the leaf level and using these average values to sum at parent level?
I am referring to the group concatenation where we get all the values of a single column (of all the rows) grouped into one cell as a concatenated string. I know I can achieve this using temporary tables and cursors in SQL Server. But I cannot have a cursor in SQL CE. I need to add this as a command to a tableadapter in a Dataset Designer. Please let me know if you can think of a workaround.
This is what I want:
Table 1:
Col1 Col2
1 a
1 b
2 c
2 d
2 e
Resultset should be:
Table 2:
Col1 Col2
1 a, b
2 c, d, e
How can I simulate 1,000 simultaneous users in my database?
View 3 Replies View RelatedI would like to generate an incrementing column value to each row found in a query in SQL Server 2000.
View 13 Replies View RelatedI have a merge where the subscriber can do changes to its tables ... But as I found out the changes are made only if publisher simulate an row change or changes something effectively
I'm not sure that at every replication the publisher table would be changed so i need something to simulate a change in the publisher table
Can anyone please help me with this ?
I want to simulate 100 users simultaneously executing a procedure in sql server (best example would be 100 users using one report with different parameters in ssrs at the same time ). can i do that ?
View 3 Replies View RelatedI have a table (let's call it MyTable) that consists of four fields:
Id, Source, FirstField, and
SecondField, where Source only takes one of two values:
Source1 and Source2.
The records in this table look as follows:
Id
Source
FirstField
Secondfield
1
Source1
Product 3 name
Product 3 description
[code]...
I need to return, using 3 different T-SQL queries:
1) Products that exist only in Source2 (in red above)
2) Products that exist only in Source1 (in green above)
3) Products that exist both in Source1 and Source2 (in black above)
For 1) so far I've been doing something along the lines of SELECT * FROM MyTable WHERE Source=Source1 AND FirstField NOT IN (SELECT DISTINCT (FirstField) FROM MyTable WHERE Source=Source2)
I have read about INTERSECT and EXCEPT, but I am a little unclear if they could be applied in this case out of the box.
I have the following script that calculates Sales by month and current year.
We run a Fiscal year from April 1st thru March 31st.
So April 2012 sales are considered Fiscal Year 2013.
Is there a way I can alter this script to get Fiscal Year Totals?
select ClassificationId, YEAR(inv_dt) as Year, cus_no,
isnull(sum(case when month(inv_dt) = 4 then salesamt end),0) as 'Apr',
isnull(sum(case when month(inv_dt) = 5 then salesamt end),0) as 'May',
isnull(sum(case when month(inv_dt) = 6 then salesamt end),0) as 'Jun',
isnull(sum(case when month(inv_dt) = 7 then salesamt end),0) as 'Jul',
[Code] ....
Data returned looks like the following.
ClassificationID Year Cus_no Apr May June ....
100 2012 100 $23 $30 $400
100 2013 100 $40 $45 $600
What I would need is anything greater than or equal to April to show in the next years row.
Here's the scenario. I have a table (let's call it MyTable) that consists of four fields: Id, Source, FirstField, and SecondField, where Source only takes one of two values: Source1 and Source2.
The records in this table look as follows:
I need to return, using 3 different T-SQL queries:
1) Products that exist only in Source2 (in red above)
2) Products that exist only in Source1 (in green above)
3) Products that exist both in Source1 and Source2 (in black above)
For 1) so far I've been doing something along the lines of
SELECT * FROM MyTable WHERE Source=Source1 AND FirstField NOT IN (SELECT DISTINCT(FirstField) FROM MyTable WHERE Source=Source2)
Not being a T-SQL expert myself, I'm wondering if this is the right or more efficient way to go. I have read about INTERSECT and EXCEPT, but I am a little unclear if they could be applied in this case out of the box.
Hi
I am currently developing a DBA management console for a company who have 45 SQL Servers, 20 of which are in the production environment. As part of the development I have created a DBA dashboard with various alerts and information dials regarding the state of the SQL Infrastructure. I came accross a problem yesterday that I cannot find the answer to.
One of the alerts I have developed is a simple "Heart Beat" indicator that displays that the SQL Server is present and "alive". To do this I have a central database running on SQL 2005 which has linked server connections toall 45 SQL Servers. This central database runs a simple select statement on each server (something that I know works if the server is there). The select is run as dynamic SQL as I need to build up the SQL as part of a cursor to place the server name within the from clause. Here is the select I am using: -
select top 1 dbid from [server].master.dbo.sysdatabases
If the server is not there an error occurrs. I trap this and record that the server may not be present. The cursor then moves on to the next server to check.
This works fine when ran from Query Analyser. I can simulate a failed server by deleting the link server connection. For the server in questions an error is raised when the select is run, I store the error and on the Dashboard screen you can see an indicator saying that the server is currently non-contactable (i.e. failed Heart Beat).
My problem comes when I try and schedule this procedure. If I run it as an SQL Agent Job it behaves differently. Here, as soon as the error is detected it bombs out stating that the step has failed. I don't mind it stating that the step has failed, what I want it to do is to complete the cursor loop on all the servers. You see at the top of the procedure I set all the heartbeats flags to 0 (i.e. not contactable) so I need to to complete the run. I have search the Agent set-up and can find no flag to stop it halting processes when an error occurs.
The servers are configured not to allow RPC and I would rather not have to put a job on every server to tell me they exist as this would need managing going forward.
Any help you can offer would be greatly appreciated - Happy New Year by the way!
I'm trying to generate a report using matrix like this
Month
Product PreviousYearSalesAmount SelectedYearSalesAmount %SalesDifference
I can populate year sales amount, but i cant calculate the percentage.
Note: Month and Year are passed as parameters.
I have three web form controls, a ddl that contains the day, another ddl that contains the month and a textbox that contains the current year. To send the date chosen by the user to the database, I join the three web form control values so that the resultant string is ‘day/month/year’ thus:
CmdInsert.Parameters("@Date").Value = day.SelectedItem.Value + "/" + month.SelectedItem.Value + "/" + year.Text()
And the resultant string is: dd/mm/yyyy, for example 30/08/2004.
But the problem is if the user does not select any day or any day and month, then the resultant string is for example; 00/08/2004 or 00/00/2004, but the problem is the database does not accept this format as datetime. How can I do it?
I want the user has the possibility to chose as well only the month and year, and as well only the year. Is it possible to send to the database the datetime format with only the month and year, or only the year?
Thank you,
Cesar
I have two queries that give me the total sales amount for the current year, and the last year.
SELECT SUM([Sales (LCY)])
FROM [$Cust_ Ledger Entry] cle
LEFT OUTER JOIN dw.dim.FiscalDate fd
ON fd.CalendarDate = cle.[Posting Date]
WHERE [Customer No_] = '10135'
AND fd.CalendarYear = '2013'
[Code] ....
I would like to learn how to be able to make this a single query and end up with two columns and their summed up totals. Like it shows on the attached image.
This is my query without the columns I need:
SELECT
c.CustomerNumber
,c.Name
,c.ChainName
,c.PaymentTermsCode
,cle.CreditLimit AS 'CreditLimit'
,SUM(cle.Amount) AS 'Amount'
[Code] ....
I'm using PHP with SQLServer2k to create a page containing monthly counts of episodes at a facility occurring between two user selected month/year combinations. For instance, the user could select 10/2003 and 2/2004 and facility X and get a line for each month showing the count of episodes occuring in that month.
The problem is that the episode date is stored in three integer fields (epiday, epimonth, epiyear) and I'm having a terrible time getting them into a format where I can use them in a between statement.
I've tried evaluating the parts of the episode date seperately like:
where
(epimonth>=10 and epiyear=2003)
or
(epimonth<=2 and epiyear=2004)
and that works, but what happens when someone wants to see from 10/2002 to 2/2004?
Any suggestions on the best way to do this?
We have customers who are new to this year (2014) and there same customers in last year (2013). also there are customers we have not received business this year but only last year. so there are 4 conditions.
1) New customer (2014) - Customer(B)
2) Old Regular customer (2013 and 2014) - Customer(A)
3) Last Year (Lost) customer (2013) - Customer(C), no business received in year(2014)
For example we have a transaction table:
TransactionId, ReceivedDate, Customer
1, 2-Dec-2013, A
2, 3-Jan-2014, A
3, 2-Mar-2014, B
4, 25-Nov-2013, C
I want results like
Customer, Business (this year activity/last year activity)
A, 1/1
B, 1/0
C, 0/1
How can i show this for each year? I used to separate it month wise as below but it does not return applying year with each customer anyhow...
select t.customerId, YEAR(Receiveddate),
sum(case month(ReceivedDate) when 1 then 1 else 0 end )as Jan,
sum(case month(ReceivedDate) when 2 then 1 else 0 end )as Feb,
sum(case month(ReceivedDate) when 3 then 1 else 0 end )as Mar,
sum(case month(ReceivedDate) when 4 then 1 else 0 end )as Apr,
[Code] ....
HiI want to write a function that can return a sum for a given daterange. The same function should be able to return the sum for the sameperiod year before.Let me give an example:The Table LedgerTrans consist among other of the follwing fieldsAccountNum (Varchar)TransdateAmountMST (Real)The sample data could be1111, 01-01-2005, 100 USD1111, 18-01-2005, 125 USD1111, 15-03-2005, 50 USD1111,27-06-2005, 500 USD1111,02-01-2006, 250 USD1111,23-02-2006,12 USDIf the current day is 16. march 2006 I would like to have a functionwhich called twice could retrive the values.Previus period (for TransDate >= 01-01-2005 AND TransDate <=16-03-2005) = 275 USDCurrent period (for TransDate >= 01-01-2006 AND TransDate <=16-03-2006) = 262 USDThe function should be called with the AccountNum and current date(GetDate() ?) and f.ex. 0 or 1 for this year / previous year.How can I create a function that dynamically can do this ?I have tried f.ex. calling the function with@ThisYear as GetDate()SET @DateStart = datepart(d,0) + '-' + datepart(m,0) +'-'+datepart(y,@ThisYear)But the value for @dateStart is something like 12-07-1905 so thisdon't work.I Would appreciate any help on this.BR / Jan
View 3 Replies View RelatedDoes anyone have an example of an SQL query which returns rows for theyear-to-date, but where the "year" commences on August 1st?e.g. select * from mytable where datefield > last august 1stTIA for any helpIsabel
View 2 Replies View RelatedI have a table of data that has a format similar to the following:
EventID | Event Date
--------------------
1 | 1/1/2014
2 | 2/8/2014
3 | 10/1/2014
4 | 2/5/2014
5 | 4/1/2014
6 | 9/1/2014
What I am trying to do is create a DAX formula to rank each event in the order that it happened for the year. So I want to end up with something like this. This way I can compare the events year over year as the events don't happen on any regular time schedule.
Event Date | Year | Rank
------------------------
1/1/2014 | 2014 | 1
2/8/2014 | 2014 | 2
10/1/2014 | 2014 | 3
2/5/2015 | 2015 | 1
4/1/2015 | 2015 | 2
9/1/2015 | 2015 | 3
I have tried to do this by creating a formula that will give me the day number of the year:
Day of Year =(YEARFRAC(CONCATENATE("Jan 1 ", YEAR([Event Date])),[Event Date])*360)+1
Then using rankX on this table, but I cant seem to get the proper result. Perhaps I am not understanding the use of rankX or going about this the right way.
=RANKX(FILTER(Event,EARLIER(Event[Event Year])=Event[Event Year]),Event[Day of Year])
or
=RANKX(All(Event[Event Year]),[Day of Year],,1,Dense)