I need to create a set so that when a user selects a month in filter (say 201506) then it should give me a list of months from 201406 to 201506. Any appropriate MDX query.
View 7 RepliesI have table 'Open_Months' as shown below
Emp_IdMonthYear
00FBG 42013
I need current month and previous 2 months, for this i have concatinated month and year column into date formate, the query for this as shown below
SELECT cast(CONVERT(datetime, CONVERT(varchar(4), OM_Year) + RIGHT('0' + CONVERT(varchar(2), OM_Month), 2) + '01', 112) AS Datetime) from Open_Months where OM_Emp_ID = '00FBG'
Date
2013-04-01
From the above date I need to find current month and its previous 2 months.
I have a problem with a date in my sql view, I need the records from the 3 last months but without the current month, if I execute my view right now I have the records from January to april but I just need from January to march, I must have always the 3 previous month but I don't know how I can do it
(dbo.frhkrg.fakdat >= DATEADD(MM, - 3, GETDATE()))
I do appreciat your help, I want to run a store procedure which will show 6 months . I do not know how to write the procedure, here in the notion in my mind, I want to be able to pass an input parameter (month) to the procedure which will then run a query to show 6 months prior the input parameter month, how can I do that, thanks for your help
Ali
hi,
i am generating report for my project.
my table goes like
ID VASID VASSID JanMail JanVisit JanPhone JanComment FebMail FebVisit FebPhone FebComment................. DecPhone
1 25 4 True False False Mail me False True False Visit me
My report has 3 check boxes for Mail,Visit,Phone respectively and a listbox of 12 months january-december respectively..
once user check on Mail and select a month suppose January in my report,the report should generate only January Comments.
here user can select any number of months.if user selects january,february and march, report should generate respective months Comments.
Please help me in writing SQL Query to get the comments.......
if any one know the solution for the above problem,Please help me
Thanks & Regards,
I have a SQL 2005 question for you. In the SQL server Management Studio. When I right click on the database and use the SQL Server Import and Export wizard, I can import databases but cannot export them.
The error says:
The current user is not an owner of the selected database. This might cause some operations with this database to fail.
I use sa to loginto the server Management Studio, does anyone know how to create a database where the user and owner are the smae so I can export?
I have recently installed SQL 2005 I use the SQL ecpress and management studio. In the SQL server Management Studio, when I right click on the database and use the SQL Server Import and Export wizard, I can import databases from the web hosting I'm workign with to my mycomputer, but cannot export them.
When I try to export database tables with the SQL Server Import and Export wizard
The error says: The current user is not an owner of the selected database. This might cause some operations with this database to fail.I use sa to log into the management studio aand creat teh database after I login. How do I create a database so that the user and owner match and will allow me to export tables and data?
I have a SQL 2005 question for you. In the SQL server Management Studio. When I right click on the database and use the SQL Server Import and Export wizard, I can import databases but cannot export them.
The error says:
The current user is not an owner of the selected database. This might cause some operations with this database to fail.
I use sa to loginto the server Management Studio, does anyone know how to create a database where the user and owner are the smae so I can export?
I need to get previous month data in the table based on current date.
In case of execution of each month, the data for previous month should come with date as between
create table TestDate
(Sno Int,
Name varchar(100),
DateofJoin datetime)
insert into TestDate values (1,'Raj', '2/21/2014')
insert into TestDate values (1,'Britto', '6/12/2014')
insert into TestDate values (1,'Kumar', '5/14/2014')
insert into TestDate values (1,'Selva', '6/27/2014')
insert into TestDate values (1,'Ravi', '5/2/2014')
insert into TestDate values (1,'Gopu', '6/2/2014')
/*
if I execute in month July ( ie: today)
select * from TestDate where dateofjoin between 1-june-2014 and 30-june-2014
Result
5 Ravi 2014-05-02 00:00:00.000
3 Kumar 2014-05-14 00:00:00.000
if I execute in month June
select * from TestDate where dateofjoin between 1-may-2014 and 30-may-2014
Result
6Gopu2014-06-02 00:00:00.000
2Britto2014-06-12 00:00:00.000
4Selva2014-06-27 00:00:00.000
/*
At the following MDX code , I want to get the aggregate of measure only for members that are also in the specified last time (like in examp 01/06/2015) . I tried existing and exists, but without any lack.
WITH MEMBER A AS
(b)+(C)
MEMBER [Measures].[Aggregate] AS
Aggregate(DAYTIME].[Month].&[2013-01-01T00:00:00]:[DAYTIME].[Month].&[2015-06-01T00:00:00],
([Measures].[D])
[Code] ....
Hello what I'd like to display the following in a matrix report:
Parameter selected: 3 (March), 2008 (Year)
Monthly TO Summed up
ArtNo March <=March
1210 20,500 50,900
1220 21,200 64,000
1230 15,400 40,300
... ... ...
So, in the rows I have the articles and in the column the selected month via parameter. In another column I need to sum up all monthly values up to the selected month, meaning in this example the sum of jan, feb and mar per article.
I have the following table
FeedBack Type Date
test2 positive 03/15/08
tes3 negative 03/01/08
.. ....
in my page i need to select the number of negative/positive comments within the last
1 month, 6 months, 12 months
How can I accomplish that?
thanks
Hi All,
His there any way to build a connection string to sql server based on the current user credential?
I mean, intead of using
user id=Adminpassword=adminPass
Is it possible to do something like
user id= Context.User.IDpass=???
I'm asking cause, iI don't want to use impersonisation in my code.So that I can be sure logged user only sees what they can
(I'm a newbie, so this whole thing may makes no point(thanks for clarifying
I have an issue related to SSAS security. We have an SSAS multidimensional cube which needs 3 types of security:
- Access to the entire cube => OK, based upon a role
- Restricted access to one department (= dimension) => OK, based upon a role
- Access to the entire cube, but with dynamic security on 2 measures.
Let's say, we have 2 departments (food and non-food). Users within food are allowed to see sales and pieces from the food department, but not from the non-food department.
It is not an option to restrict access to the non-food department because there are other measure which they have access to. I tried cell security, but this is very slow and generates multiple empty rows on my selections.
I have a business requirement to build a tabular data model, where I need to mask information of other Agents from a given Agent but I still need to show the overall sales of the given product.
For eg: IF an Agent is in APAC region he should see APAC region sales and also should be able see the sales of the same product in other region without knowing region specific break down.
For Agent "Tom" in APAC region, the numbers will look like this
APAC_Sales = 100,000
Other_Sales = 500,000
And if "John" is in NA region, then the number will look like this for him
NA_Sales = 200,000
Other_Sales = 400,000
I wanted to create "Roles" based on the Region, so all the agents belong to "APAC" region will have same view as Tom and "NA" region agents will have John's view.
Let's say I have a table with 3 fields: an ID field (primary key, set as an id field, etc.), a Name field (nvarchar50), and an Age field (int). I have a form that has three elements:
DropDownList1: This drop down list contains 3 choices- "=", ">", and "<".
Age: This text box is where someone would enter a number.
Button1: This is the form's submit button.
I want someone to be able to search the database for entries where the Age is either equal to ("="), greater than (">"), or less than ("<") whatever number they enter into TextBox1.
The code-behind is shown below. The part I'm confused about is that if I load this page, the query works the -first- time. Then, if I try to change the parameters in the form and submit it, I get the following error:
"The variable name '@Age' has already been declared. Variable names must be unique within a query batch or stored procedure."
Any help would be appreciated.
Here is what I'm using in my code behind:
protected void Button1_Click(object sender, EventArgs e) { System.Text.StringBuilder sb = new System.Text.StringBuilder(); sb.Append("SELECT * FROM People WHERE Age "); switch (DropDownList1.SelectedValue) { case "=": sb.Append("= "); break; case ">": sb.Append("> "); break; case "<": sb.Append("< "); break; } sb.Append("@Age"); SqlDataSource1.SelectCommand = sb.ToString(); SqlDataSource1.SelectParameters.Add("Age", TypeCode.Int32, Age.Text); }
Hi all,
I'm a beginner to Report Services, and have tons of questions.
Here's the first one:
if the reports are created based on the condition that the user selects, how can I create the reports with Report Services?
For example,
the user can select the fields that will be shown on the reports, as well as the group fields, the sort fields and restrict fields. So I would not be able to pre-create all possible reports and deploy them to the report server, and I think I should create the reports dynamicly based on what the user select.
Could someone tell me how to do it (create and deploy the reports)?
Thanks a million!
Jonee
I am trying to implement data masking based on user login and not sure why this is not working. I have the dimensions DimBrand, DimProduct and DimUser. I should mask the BrandCode with 'XXXX' nothing but in the report all the BrandCode should appear but few of the code will be masked if the user is not belongs to that group. I have a fact table FactProduct in this. In the cube I created all these 3 dimensions and the fact table. I created a new dimension DimBrandMask and I separated the code over there with a relationship with the actual DimBrand dimension. In the cube a reference relationship is set up with the measure group. Created a role with read access.
In the dimension data tab of role I put the below MDX to allowed set.
NonEmpty([DimBrandMask].[Brand Code].Members, (StrToMember("[DimUser].[Login Name].[Login Name].[" + UserName() + "]") ,[Measures].[Dim User Count]))
And in Denied Member set i put the below MDX
IIF( (StrToMember("[DimUser].[Login Name].[Login Name].[" + UserName() + "]"), [DimUser].[Access Right].&[False]), NONEMPTY( [DimBrandMask].[Brand Code].Members,(StrToMember("[DimUser].[Login Name].[Login Name].["
+ UserName() + "]"), [DimUser].[Access Right].&[False], [Measures].[Dim User Count])),{})
Note I created one measure group from the DimUser table and the measure [Dim User Count] is used in the above query.
I am expecting some result like below
Brand BrandCode Count
Brand1 b1 6
Brand2 XXXXX 5
Brand3 XXXXX 10
How can I get the date of the first day of the month of3 months ago in one statement ?(And with no time in it ??)Arno de Jong, The Netherlands.
View 1 Replies View RelatedHello
I had a requirement to filter records for the current year only... I went back to the user and explained that the logic wasn't sound... eg if somebody did the search early in January then they would probably get no results back. My suggestion was to go back two months if the current date is in January or february.
So, this is what I have.......
Code Snippet
where cs.startdate > case when year(cs.startdate) = year(getdate()) and month(getdate()) > 2 then
convert(char(4),year(getdate()))+'-01-01' else dateadd(month,-2,getdate()) end
Is there a neater/better way of coding this?
Jon
I'm trying to write some code that will get me the last day of each month for the months that fall between 2 dates.
So if i have a table with a record with a begin date of 01-01-2012 and an end date of 09-14-2012, i would want a result set of the following 9 records:
01-31-2012
02-29-2012
03-31-2012
04-30-2012
05-31-2012
06-30-2012
07-31-2012
08-31-2012
09-30-2012
So i basically get the last day of each month between the dates listed, including the months that the dates are in themselves (inclusive list).
I have a date dimension table with 1 row for every day from 1990 to 2025. There is also a field with the Last day of Month for a given date. My issue is that I'm not sure how to write the T-SQL to get what I need.
I know how to get the events that start say on May, and I know how to get the events that end on May, however, How would I get the events that start on January and end in July. The month of May should display that event too.
so far, as an example, I have: SELECT
Events.startDate,
Events.endDate
FROM Events
WHERE
Events.Active = 1
AND
startDate BETWEEN convert(smalldatetime, '5/1/2006') AND convert(smalldatetime, '5/31/2006')
ORDER BY Events.startDate ASC; thank in advance.
I need to find out All mondays / Tuesdays etc dates for next 6 months from the current date.
I have a table called DayOfWeek and the records are
1Sun
2Mon
3Tue
4Wed
5Thu
6Fri
7Sat
so if I pass "1" to the stored procedure, I need to find all Sunday dates for the next 6 months
And so if I pass "2" to the stored procedure, I need to find all Monday dates for the next 6 months...etc
Hi All,
would like to make a report with sales figures per month even is there are no sales figures that month.
Report should still show the month.
Any help to get me started in the wright direction much appreciated
edwin
My data has 2 fields: Customer Telephone Number, Date of Visit.
Basically I want to add a field ([# of Visits]), which tells me what number of visit the current record is within 6 months.
Customer TN | Date of Visit | # of Visits (Within 6 month - 180 days)
1111 | 01-Jan-2015 | 1
1111 | 06-Jan-2015 | 2
1111 | 30-Jan-2015 | 3
1111 | 05-Apr-2015 | 4
1111 | 07-Jul-2015 | 3
As you can see, the last visit would counts as 3rd because 180 days from 07-Jul-2015 would be Jan-8-2015.
l want to run my procedure every month,but it must look at the 1st and the last day of the month.So that when l use my where clause l'll
say where 1st and last day between @startdate and @enddate. How do l do that?
collections_hexagon '2002-05-12','2002-05-12'
Alter Procedure Collections_Hexagon
(
@Startdate datetime,
@Enddate datetime
set @Startdate = 1stdayof currentMonth
set @Startdate = lastdayof currentMonth
)
hi,
i am a nubie, and struggling with the where clause in my stored procedure. here is what i need to do:
i have a gridview that displays records of monthly view of data. i want the user to be able to page through any selected month to view its corresponding data. the way i wanted to do this was to set up three link buttons above my gridview:
[<<Prev] [Selected Month] [Next>>]
the text for 'selected month' would change to correspond to which month of data was currently being displayed in the gridview (and default to the current month when the application first loads).
i am having trouble writing the 'where' clause in my stored procedure to retrieve the selected month and year.
i am using sql server 2000. i read this article (http://forums.asp.net/thread/1538777.aspx), but was not able to adapt it to what i am doing.
i am open to other suggestions of how to do this if you know of a cleaner or more efficient way. thanks!
I have a table with dates and values and other columns. In a proc i need to get the result as Month and the values for all the months whether or not the data exists for the month.
The Similar table would be-
create table testing(
DepDate datetime,
val int)
insert into testing values ('2014-01-10 00:00:00.000', 1)
insert into testing values ('2014-05-19 00:00:00.000', 10)
insert into testing values ('2014-08-15 00:00:00.000', 20)
insert into testing values ('2014-11-20 00:00:00.000', 30)
But in result i want the table as -
Month Value
Jan1
Febnull
Marnull
Aprnull
May10
Junnull
Julnull
Aug20
Sepnull
Octnull
Nov30
Decnull
Hi there everbody,
i am trying to get the last day of the Q + 1 month
the first part i have succeeded (dateadd(ms,-3,DATEADD(qq, DATEDIFF(qq,0,getdate() )+1, 0))) ,but how do i add 1 more month ?
would appreciate any suggestion
regards
Yoav
hi,
If today is the 22/4/08
how can I get the day last month,
eg. 22/3/08
?thank you
I have sales from 2010 to today in my cube. my question is i want to see sales amount from 2010 to 2014 if i select 2014. or if I select 201405 ( may 2014), i want to see sales from 20100101 to 20140531. same with date. basically i want to to al the sales til the date/month /year selected. how can i achieve this?
View 2 Replies View RelatedDeveloping a measure which displays the difference of two values from the selected years.
An example : Show the difference of the sales amount from 2013 and 2015.
Since i am not really into mdx or calculated members.
Hi,I have a simple table called events, which lists the start and end dates of events. I'm using a calendar control that queries the db for events, but at the moment it does a check for every day by passing in the day. (Very inefficient) What I'd like to do is pass in the current month, and get a set of rows that have an event which is in that month. It sounds easy, but I'm a little confused about what to do if the event starts current month -1 and ends currentmonth +1 I obviously need to return results like these also.
View 4 Replies View Related