I have a date dimension set in the SSAS Cube. I have been trying get quarter,year,month,semester start and end dates using ClosingPeriod() and OpeningPeriod() functions but not getting the exact value. How the get correct dates for a given date.
View 2 RepliesI have a program that calls queries (OLAP system) the system includes a dimension of date: Year, Quater, Month, Week
When the result appears in the table, it is not in order? Only the year is in oredr and after that each heirachy is wrong and not in order....not sure how to do this!!!
any help would be grateful!!! not sure what I should be looking at.....
Does anyone know of a way to use a funtion for returning records based on fiscal reporting periods like Quickbooks uses for example "This Month", "Last Month", "This Quarter", "Last Quarter", "This Year", "Last Year". While I realize that I can create a very long date time parsing routine for this but it is not very elegant or useful. I thought there might be a way to do this already with an existing function.I have created a stored procedure that I pass a @ViewRange Parameter to and it returns the records that I want but I need this ability in several procedures and wanted to turn it into a stored procedure.IF @ViewRange = 'This Month' SELECT TOP 20 Customer.LastName AS Customer, SUM(Sales.AmtCharge) AS Amount FROM Customer INNER JOIN Sales ON Customer.CustNo = Sales.CustNo WHERE (MONTH(Sales.InvDate) = MONTH(CURRENT_TIMESTAMP)) AND (YEAR(Sales.InvDate) = YEAR(CURRENT_TIMESTAMP)) GROUP BY Customer.LastName ORDER BY SUM(Sales.AmtCharge) DESC;IF @ViewRange = 'Last Month' SELECT TOP 20 Customer.LastName AS Customer, Sum(Sales.AmtCharge) AS Amount FROM Customer INNER JOIN Sales ON Customer.CustNo = Sales.CustNo WHERE(MONTH(Sales.InvDate) = MONTH(CURRENT_TIMESTAMP) - 1) And (YEAR(Sales.InvDate) = YEAR(CURRENT_TIMESTAMP)) GROUP BY Customer.LastName ORDER BY Sum(Sales.AmtCharge) DESC; Any ideas?
View 8 Replies View RelatedI am trying to group counts by week,month,quarter, year for a particular activity type and I'm having issues.Here's my code so far:
SELECT
distinct
EmailAddressID,
emailaddress,
SUM(CASE WHEN [ActivityDate] >= DATEADD(WEEK, DATEDIFF(WEEK, 0, @DT), 0)
THEN
SUM(CASE WHEN EmailActivityType = 'OPEN' THEN 1 ELSE 0 END) END AS WeekTotalOpens
FROM EmailActivity
WHERE DATEPART(YEAR, [ActivityDate]) = DATEPART(YEAR, @DT)
GROUP BY EmailAddressID,emailaddress
Desired Output:
EmailAddressId EmailAddress WeekTotalOpens MonthTotalOpens etc. then WeekTotalClicks and so on....
SQL doesn't seem to like the sub-aggregate. What is the best way to approach?
There is a way to get the non empty max calendar quarter of the year and the last year. For example, the max calendar quarter of the last year should be 4, and in this moment the max quarter of this year should be 3.
I am building a report in SSRS and trying to avoid query the DWH database. I want to run every query against the cube.
I need developing a query to get the average count by the following:
Day - use daily info for the last ??? days
Weekly - average
- Add all days and divide by 7
- As of Saturday midnight
Monthly - average
- Add all days and divide by days in the month
- As of last save on last day of month
Quarter - average
- Add all days and divide by number of days in the quarter
- As of last day of quarter
Year - average
I don't have requirements for year as of yet.
How can I get the avery count per these timeframes?
Hi every one,
I have a database table and currently users may retrieve records for a specified date range by providing the start and end dates and then records between those dates provided are retrieved. For example if users wanted to view all records entered in april, they would have to select 04/01/2007 as the start date and then 04/30/2007 as the end date. The records for april would then be displayed in a gridview.
How can configure my sql query such that instead the user selectes a month from a dropdownlist of 12 months. I would love a user to just select the desired month from a list instead of selecting start and end dates. Eg if they are intrested in a report for june, then they should just select june from the list instead of specifying the start and stop dates. HOW can i achieve this.
Hi all I this stored procedure is suppose to turn give the users the ability to put the month and date in so they can see how many each inspector did for that month and year.
Create Procedure LookupYearMonth
AS
SELECT I.[Last Name], I.[First Name],
[Date by Month] = DATENAME(month, MT.[Date] + ' ' + DATENAME(year, MT.[DATE]),
[Count Of Main Table] = count(*)
FROM Inspectors I
INNER JOIN [Main Table] MT
ON (I.ID = MT.Inspector)
GROUP BY I.[Last Name], I.[First Name],
DATENAME(month, MT.[Date] + ' ' + DATENAME(year, MT.[DATE])
WHERE (MT.[Date] >= CONVERT(datetime, @EnterMonthYear)) AND
(MT.[Date] < DATEADD(month, 1, CONVERT(datetime, @EnterMonthYear)))
GO
I have two parameters in my report (StartDate and EndDate). I want to default these parameters to the previous month.
For example... If today is 5/17/2007, I want StartDate to be 4/1/2007 and EndDate to be 4/30/2007. If today would be January 30th 2007, I would want StartDate to be 12/1/2006 and EndDate to be 12/31/2006.
How can I do this?
--find day,month,year
--for day select datediff(d,'01 may 2008',getdate())
-- --for month select datediff(m,'01 jun 2006',getdate())
-- --for year select datediff(year,'01 jun 2006',getdate())
above working fine but suppose difference is 1 year 4 month and 2 month 15 days then It's giving 1 year and 2 month respectively.
but I want completely so I can use this in case of expired user in my project.
User can be expired in 1 month,3 month and 1 year. So I'm not able to recognize.
thanks
Hi all,
I am trying to use the custom code in the report but I don't think I am understanding how this is being used.
I have a function to get starting months for a report parameter.
The function is below:-
--------------------------------------------------------------
Shared Function GetStartingMonths() as String
dim strDefault as string
dim CurrentMonth as String
Dim SqlString as String
'strDefault = Month(Now) & "/1/" & Year(Now)
CurrentMonth = "5/1/2002"
Do While CDate(CurrentMonth) <= Now
SqlString = SqlString + "Select " & CurrentMonth & " as value, " & MonthName(Month(CurrentMonth)) & " " & Year(CurrentMonth) & " as MonthYear"
CurrentMonth = dateadd("m",1,CDate(CurrentMonth))
if Cdate(CurrentMonth) = Now then
Exit Do
else
sqlString = SqlString & " Union "
end if
Loop
return SqlString
End Function
---------------------------------------------------------------
what i am trying to do here, and hopefully produce a sql string that would fill my dataset of dates and their representation.
In the dataset, I had put the following expression
=Code.GetStartingMonths()
However, I can't seem to get the parameter to display the dates. shows up as disabled in my report.
Am I doing something wrong here or is there a better way to doing this ?
Additionally, I was wondering whether there is a better SQL code that would achieve the same thing I am doing ?
thanks !
Bernard Ong
I've written sql code which takes a date and finds the Last Day of the Month one year ago. For example, it takes the date '2015-04-17' and returns the date '2014-04-30'. The code works fine in a query. Now I'm trying to turn this into a function. However, when I try to create the function I get the error:
Operand type clash: date is incompatible with int
Why is this error being returned?
Here is my function:
CREATE FUNCTION dbo.zEOM_LY_D(@Input Date)
RETURNS date
AS
BEGIN;
DECLARE @Result date;
SET @Result = convert(DATE, DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,dateadd(m, -11, @Input)+1),0)),101)
RETURN @Result;
END;
i have some classes that I want to group by month/year (note:i dont need the day of the month)
how do i wirte my sql so it only gives me the dictinct groups month/year of the classes I have so that it comes out like so..
11/2006
12/2006
1/2007
3/2007
i try with my sql below but i cant get the groups th come out in order. i dont think it sees it as a date value.
dbo.classgiven.classdate date of the class.thank you all
SELECT DISTINCT { fn MONTH(dbo.classgiven.classdate) } " + "/" + "{ fn YEAR(dbo.classgiven.classdate) } AS monthyear,{ fn MONTH(dbo.classgiven.classdate) } AS monthcode FROM dbo.classT INNER JOIN dbo.classgiven ON dbo.classT.classcode = dbo.classgiven.classcode WHERE (dbo.classT.discount = '-1') AND (dbo.classT.coned IS NOT NULL)", conNorthwind )
I need to find the missing months in a table for the earliest and latest start dates per ID_No. As an example:
create table #InputTable (ID_No int ,OccurMonth datetime)
insert into #InputTable (ID_No,OccurMonth)
select 10, '2007-11-01' Union all
select 10, '2007-12-01' Union all
select 10, '2008-01-01' Union all
select 20, '2009-01-01' Union all
select 20, '2009-02-01' Union all
select 20, '2009-04-01' Union all
select 30, '2010-05-01' Union all
select 30, '2010-08-01' Union all
select 30, '2010-09-01' Union all
select 40, '2008-03-01'
For the above table, the answer should be:
ID_No OccurMonth
----- ----------
20 2009-02-01
30 2010-06-01
30 2010-07-01
1) don't include an ID column,
2) don't use the start date/end dates in the data or
3) use cursors, which are forbidden in my environment.
I've got some records like this:
ID_________Jan Feb...........................Dec
0000030257 0 0 0 0 0 0 1 1 1 1 1 0
where each month field has a 0 or 1, depending on if the person was enrolled that month.
I'm being asked to generate a table like this:
ID_________ Start_Date End_Date
0000030257 July 1, 2014 Nov 30, 2014
Is there some slam dunk way to do this without a bunch of If/Then statements?
The editor compressed all my space fields, so the column headers are off in some places.
I'm trying to generate this query, that displays Budget Current Year , Actual Current Year and Prior Year Revenue. When It comes to the Budget and Actual everything works fine, however when I try to add the query for the Prior Year I get an error, and I realized that the leap date is causing the error
Here is what I'm trying to generate
InnCodeID
Quarterly
Monthly
Days
Period
Year
BARmRev
AARmRev
PYRmRev
ADDIS
Q1
Jan
1
1
2008
NULL
NULL
ADDIS
Q1
Jan
1
1
2008
3462.14
5107.65
ADDIS
Q1
Jan
1
1
2008
NULL
NULL
ADDIS
Q1
Jan
1
1
2008
NULL
NULL
Here is the error that I'm getting:
Code Snippet
Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
(4834 row(s) affected)
Here is my Transact-SQL Syntax (summarized because I Couldn't post it):
SELECT
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01'
AND Year(dbo.Trans.TR_Date) = Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1'
THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
(SELECT Trans1.TR_Amount
FROM dbo.Trans Trans1
WHERE Trans1.TR_Dept = '10' AND TR_Main = '5120' AND TR_Sub = '01' AND trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date)
AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Year(dbo.CurrentDate.CurrDate) AS varchar(4))) AS datetime)
AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND trans1.datatype = dbo.Trans.DataType) ELSE NULL END) * - 1 AS BARmRev,
--AA Script Here AS AARmRev,
(CASE WHEN (CASE WHEN dbo.Trans.Tr_Dept = '10' AND dbo.Trans.TR_Main = '5120' AND dbo.Trans.tR_sub = '01' AND Year(dbo.Trans.TR_Date)
= Year(dbo.CurrentDate.CurrDate) AND dbo.trans.Datatype = '1' THEN dbo.trans.Tr_Amount ELSE NULL END) IS NOT NULL THEN
(SELECT SUM(Trans1.TR_Amount)
FROM dbo.Trans Trans1
WHERE RIGHT(RTRIM(Trans1.TR_Dept), 2) = '10' AND Trans1.TR_Main = '5120' AND Trans1.TR_Sub NOT BETWEEN '04' AND '05' AND
trans1.TR_Date = CAST((CAST(Month(dbo.Trans.TR_Date) AS varchar(2)) + '/' + CAST(Day(dbo.Trans.TR_Date) AS varchar(2))
+ '/' + CAST(Year(dbo.CurrentDate.CurrDate)-1 AS varchar(4))) AS datetime) AND Trans1.TR_Entity = dbo.Trans.TR_Entity AND
trans1.datatype = '0') ELSE NULL END) * - 1 AS PYRmRev
FROM dbo.EntityDef INNER JOIN
dbo.Trans ON dbo.EntityDef.ED_Property_ID = dbo.Trans.TR_Entity INNER JOIN
dbo.CurrentDate INNER JOIN
dbo.DimTime ON YEAR(dbo.DimTime.TimeDate) = YEAR(dbo.CurrentDate.CurrDate) ON dbo.Trans.TR_Date = dbo.DimTime.TimeDate
WHERE (dbo.EntityDef.ED_Property_ID = 'ADDIS')
ORDER BY dbo.EntityDef.ED_Property_ID, dbo.DimTime.TimeDate
I appreciate all your help
Thanks
I have the following script that calculates Sales by month and current year.
We run a Fiscal year from April 1st thru March 31st.
So April 2012 sales are considered Fiscal Year 2013.
Is there a way I can alter this script to get Fiscal Year Totals?
select ClassificationId, YEAR(inv_dt) as Year, cus_no,
isnull(sum(case when month(inv_dt) = 4 then salesamt end),0) as 'Apr',
isnull(sum(case when month(inv_dt) = 5 then salesamt end),0) as 'May',
isnull(sum(case when month(inv_dt) = 6 then salesamt end),0) as 'Jun',
isnull(sum(case when month(inv_dt) = 7 then salesamt end),0) as 'Jul',
[Code] ....
Data returned looks like the following.
ClassificationID Year Cus_no Apr May June ....
100 2012 100 $23 $30 $400
100 2013 100 $40 $45 $600
What I would need is anything greater than or equal to April to show in the next years row.
Hello,
what's best for year resp. quarter Field, char(4) resp. char(1), integer or other?
Both are part of a composite index.
Thanks
Silas
I have three web form controls, a ddl that contains the day, another ddl that contains the month and a textbox that contains the current year. To send the date chosen by the user to the database, I join the three web form control values so that the resultant string is ‘day/month/year’ thus:
CmdInsert.Parameters("@Date").Value = day.SelectedItem.Value + "/" + month.SelectedItem.Value + "/" + year.Text()
And the resultant string is: dd/mm/yyyy, for example 30/08/2004.
But the problem is if the user does not select any day or any day and month, then the resultant string is for example; 00/08/2004 or 00/00/2004, but the problem is the database does not accept this format as datetime. How can I do it?
I want the user has the possibility to chose as well only the month and year, and as well only the year. Is it possible to send to the database the datetime format with only the month and year, or only the year?
Thank you,
Cesar
Hi, I have a matrix report with three data points
1. Inventory
2. Occupancy
3. Absorption
They are grouped in columns by Year and the data is returned by the query at Quarter granularity
My problem is that in the report, I need to display the Inventory data for the last quarter in each year however for Absorption it is the SUM of all 4 quarters
So, for 2006
Want Q4 data for Inventory, sum of all 4 quarters for Absorption
For 2007 Want Q2 data for Inventory (as it's the last loded quarter) and sum of Q1&Q2 for Absorption
How would I (or could I) do this in a Matrix Report - or is there a better way ?
Hi there everbody,
i am trying to get the last day of the Q + 1 month
the first part i have succeeded (dateadd(ms,-3,DATEADD(qq, DATEDIFF(qq,0,getdate() )+1, 0))) ,but how do i add 1 more month ?
would appreciate any suggestion
regards
Yoav
I'm using PHP with SQLServer2k to create a page containing monthly counts of episodes at a facility occurring between two user selected month/year combinations. For instance, the user could select 10/2003 and 2/2004 and facility X and get a line for each month showing the count of episodes occuring in that month.
The problem is that the episode date is stored in three integer fields (epiday, epimonth, epiyear) and I'm having a terrible time getting them into a format where I can use them in a between statement.
I've tried evaluating the parts of the episode date seperately like:
where
(epimonth>=10 and epiyear=2003)
or
(epimonth<=2 and epiyear=2004)
and that works, but what happens when someone wants to see from 10/2002 to 2/2004?
Any suggestions on the best way to do this?
I am trying to get my db to return a date in the format day/month/year but its returning the american version month/day/year.
I'm using a DatePart function that converts my date:
CREATE FUNCTION dbo.DatePart
( @fDate datetime )
RETURNS varchar(10)
AS
BEGIN
RETURN ( CONVERT(varchar(10),@fDate,101) )
END
This returns te american version, can anyone help me to get this to convert the UK way.
Thanks
This is my table and data
CVID | WorkExperience
--------------------------------
2838736
68181101
96568122
1135484
I need to convert into this result
CVID | WorkExperience
--------------------------------
283873 years
681818 years 5 months
9656812 years 2 months
1135484 months
Hello,I have a query that I would like to schedule in DTS. The criteria ofthis query checks for records in the table that are within the currentquarter. Here is what I have.WHERE submit_date BETWEEN '01/01/2005' AND '03/31/2005'I would like to dynamically generate the Quarter End and QuarterBeginning dates within my where clause based on the date that DTWSpackage is being executed on. Can anyone show me how this can beaccomplished?Thank You.
View 3 Replies View RelatedI am trying to always get the start of the week of the current quarter in my criteria
This is the statement for the current quarter
Dateadd(qq, Datediff(qq,0,GetDate()), 0)
This is the statement for the current week
DATEADD(wk, DATEDIFF(wk,0,GETDATE()), 0)
How to calculate from the start of the week of the current quarter...
We had a requirement that need to sum the data based on quater we will be having 12 months data in the system for an year suppose we have 12 records for 2014 year. jan month sales data should be same when we were in feb month it should sum jan+feb sales and should show in sales column whereas we were in march month it should sum jan+feb+mar sales, then same for next quater also apr month it wil be same value in may it should be apr+may in may sales value etc ....
We will be having date column values as 201401,201402,.....
How can we implement in sql sever performance should be good.
I have a simple following table which is having only one date column.
CREATE TABLE TEST_DATE
(
InputDate DATE
)
GO
INSERT INTO TEST_DATE VALUES('01-01-2015')
INSERT INTO TEST_DATE VALUES('06-25-2015')
INSERT INTO TEST_DATE VALUES('11-23-2014')
GO
SELECT * FROM TEST_DATE;
And the expected out put would be as follows:
I want to derive a Four Quarter End Date based on Date selected.
For Example if i select 01-01-2015 then
First Quarter End Date would be Previous Quarter End Date
Second Quarter End Date would be Current Quarter End Date
Third Quarter End Date would be Next Quarter End Date
Fourth Quarter End Date would be Next +1 Quarter End Date Like that
following table global_usage
ID varchar (contains alphanumeric values,not unique)
Territory (combined with ID unique)
Total_Used int can be null
Date_ date (date of the import of the data)
ID Territory Total_Used Date_
ACASC CAL071287 2014-06-01
ACASC CAL071287 2014-08-01
ACASC CAL071288 2014-09-01
[Code] .....
Now the problem,per month I need the most recent value so I'm expecting
ACASC CAL071287 2014-06-01
ACASC CAL071287 2014-08-01
ACASC CAL071288 2014-09-01
ACASC CAL071288 2014-11-01
ACASC CAL071190 2014-12-14
ACASC CAL071286 2015-01-22
ACASC CAL071165 2015-02-01
ACASC CAL071164 2015-03-01
I've tried a few thing like group,having even row_number() but I keep getting wrong results
We have customers who are new to this year (2014) and there same customers in last year (2013). also there are customers we have not received business this year but only last year. so there are 4 conditions.
1) New customer (2014) - Customer(B)
2) Old Regular customer (2013 and 2014) - Customer(A)
3) Last Year (Lost) customer (2013) - Customer(C), no business received in year(2014)
For example we have a transaction table:
TransactionId, ReceivedDate, Customer
1, 2-Dec-2013, A
2, 3-Jan-2014, A
3, 2-Mar-2014, B
4, 25-Nov-2013, C
I want results like
Customer, Business (this year activity/last year activity)
A, 1/1
B, 1/0
C, 0/1
How can i show this for each year? I used to separate it month wise as below but it does not return applying year with each customer anyhow...
select t.customerId, YEAR(Receiveddate),
sum(case month(ReceivedDate) when 1 then 1 else 0 end )as Jan,
sum(case month(ReceivedDate) when 2 then 1 else 0 end )as Feb,
sum(case month(ReceivedDate) when 3 then 1 else 0 end )as Mar,
sum(case month(ReceivedDate) when 4 then 1 else 0 end )as Apr,
[Code] ....
Does anyone know how I can get last day of month
if I pass a function a given month and and given year.
@Month = 2
@Year = 2004
The result I would need is 29 because there are 29 in
the month of February in the 2004.
Any help on this is greatly appreciated.
Kellie
I have created range bar chart and I am not able to achieve the following tasks.
1. Change X-axis Label Format to Quarter:
I have x-axis with dates and y axis of project groups. I have changed x-axis interval type = month and interval=3.
Set the Maximum = Max(ProjectEndDate) and Minimum = Min(ProjectStartDate).
Now my chart showing 3 months x-axis interval dates in mm/dd/yyyy format. I want to change this interval date format to Quarter. The problem is LabelsFormat property is not recognize the "=Q or q or quarter" and also not accepting the expressions. How can I achieve this?
2. Placing series side by side when it is not overlapping
I want to place the same group series side by side only when the previous project end date is less than next project start date, otherwise place the next project to next row. How can I achieve this?
I have a process to rollover prior quarter data to new quarter in a table.
For example, i have a table with (col1, col2, year, qtr) with data like ( Note: col1 is identity(1,1) )
1,'today',2014,1
2,'tomorrow,2014,1
3,'friday',2014,1
Now when i run my process, above 3 records will be rolled over new quarter 2014 Q2 and the table will be like
1,'today',2014,1
2,'tomorrow,2014,1
3,'friday',2014,1
4,'today',2014,2
5,'tomorrow,2014,2
6,'friday',2014,2
Row 1 with identity 1 has rolled over to new quarter row 4 with identity 4 ( qtr fields are changed )
Row 2 with identity 2 has rolled over to new quarter row 5 with identity 5. Same with last row as well.
Here, i have another table called "ident_map" with columns like (old identity, new identity ) and during rollover i am supposed to load ident_map table with old and new identity. So after rollover is complete, ident_map table should look like
1,4
2,5
3,6
I know using output clause I can capture the new identity values. 4,5,6 in this case. But is there any way to capture both old identity and new identity during rollover so that i can load the ident_map table with old and new identity.