I need to limit the sessions to access to SSAS cube to one per user. For example, if a customer uses Excel to check a cube, two or more users cannot use the same session or account.
View 2 RepliesI have saml token which contains user name and password.
I have to use this token to authunacate the ssas cube date base to open the report.
How implementing the Effective User Name authentication for ssas.
Running PivotTable reports in Excel 2007 which are linked to a SSAS Server 2008 R2 may consume high amount of memory and cause high CPU utilization.
Detail:users may set 7 or more dimensions in row section of a Pivottable report. Some of those dimensions were containing more than 10000 members.
When refreshing such a report, Analysis Services is consuming more than 16 GB of memory, cpu utilization often goes up to 80%.
To run this report it takes arround 10 minutes. During this time other users may be unable to run reports on the server.Is there a way to control expensive MDX queries caused by some users to ensure Service availability?
I am trying to implement data masking based on user login and not sure why this is not working. I have the dimensions DimBrand, DimProduct and DimUser. I should mask the BrandCode with 'XXXX' nothing but in the report all the BrandCode should appear but few of the code will be masked if the user is not belongs to that group. I have a fact table FactProduct in this. In the cube I created all these 3 dimensions and the fact table. I created a new dimension DimBrandMask and I separated the code over there with a relationship with the actual DimBrand dimension. In the cube a reference relationship is set up with the measure group. Created a role with read access.
In the dimension data tab of role I put the below MDX to allowed set.
NonEmpty([DimBrandMask].[Brand Code].Members, (StrToMember("[DimUser].[Login Name].[Login Name].[" + UserName() + "]") ,[Measures].[Dim User Count]))
And in Denied Member set i put the below MDX
IIF( (StrToMember("[DimUser].[Login Name].[Login Name].[" + UserName() + "]"), [DimUser].[Access Right].&[False]), NONEMPTY( [DimBrandMask].[Brand Code].Members,(StrToMember("[DimUser].[Login Name].[Login Name].["
+ UserName() + "]"), [DimUser].[Access Right].&[False], [Measures].[Dim User Count])),{})
Note I created one measure group from the DimUser table and the measure [Dim User Count] is used in the above query.
I am expecting some result like below
Brand BrandCode Count
Brand1 b1 6
Brand2 XXXXX 5
Brand3 XXXXX 10
I've got a cube with :
- A Training dimension
- An Employee dimension
- A fact table with each training session for each employee (including the date), with a Count measure and the associated fact dimension
Looking for syntax to add for each training session the date of the previous training session for the same employee ?
how can use this mdx script in the calculation part of a cube, will i simply dump it in the script form by starting with the 'create member current cube.
[measures].[test]'
select
[measures].[abc] on 0,
[xyz].[xyz].(&0):[xyz].[xyz].(&60) on 1
from
(
select
(tail([month].[month].[month].members,6))on 0
from
[cube])
I have created SSAS package successfully.
When I try to connect from excel , to SSAS Getting error message like
A Connection attempt failed because the connected party did not properly respond after a period of time or established connection failed because connected host has failed to respond.
If I connect to SSIS , I'm able to connect correctly.
Why I'm getting this error and how to overcome this?
I've see twice this year two different companies either already or planning on having ssas and ssrs running on the same server.
View 7 Replies View RelatedI am doing workload analysis on SSAS - Tabular (2012), I have perfmon logs captured and want to run through PAL. I am looking out for threshold file for SSAS tabular 2012/2014.
View 2 Replies View RelatedI have a Calculated Member in SSAS that I need to adjust based what the current member is.
The code is below
CASE WHEN [Measures].[End LIS] = 0 AND "HELP" THEN
CASE WHEN [Measures].[Beginning LIS] = 0 OR [Measures].[Beginning LIS] + [Measures].[Beginning LIS] + [Measures].[NETACTIVATIONS] = 0 THEN NULL ELSE
ROUND([Measures].[Disconnects]/(([Measures].[Beginning LIS] + [Measures].[Beginning LIS] + [Measures].[NETACTIVATIONS])/2) * 100 ,2) END
ELSE ROUND(([Measures].[Disconnects] / [AVERAGELIS] * 100) ,2)
END
In English - i need this to translate to - of End LIS is 0 "AND the current member is the current month and current year" THEN carry on
Else ROUND(([Measures].[Disconnects] / [AVERAGELIS] * 100) ,2).
I came up with
CASE WHEN [Measures].[End LIS] = 0
AND [Dim Date].[FSCL_YM].[Month Nm].currentmember.membervalue = Format(now(), "yyyy")+"]&["+Format(now(), "M")
THEN
CASE WHEN [Measures].[Beginning LIS] = 0 OR [Measures].[Beginning LIS] + [Measures].[Beginning LIS] + [Measures].[NETACTIVATIONS] = 0 THEN NULL ELSE
ROUND([Measures].[Disconnects]/(([Measures].[Beginning LIS] + [Measures].[Beginning LIS] + [Measures].[NETACTIVATIONS])/2) * 100 ,2) END
ELSE ROUND(([Measures].[Disconnects] / [AVERAGELIS] * 100) ,2)
END
But to no avail.
I have cubes which are large and query response time exceeds 1 minute.
So, I like advice of pre-warming cache. Any way to see if cache is already/still available for the cube?
non related - if there is some setting timeout for SSAS cache?
I have two ssas databases with same number of cube in them. Cube names are also same. I want to merge/combine these two as one so that my reporting application may see a single database having measures/dimensions from both databases.Is it possible?I am doing this to achieve loose coupling between base and regional development work. if above is not possible, any way to achieve minimum dependency between a base and a regional project.
View 3 Replies View RelatedI am using multiple IIF statements in ssas, it does not produce any output, does not shows any error, simply it processing..
View 3 Replies View RelatedI am facing issue with partition processing. I am having a SSAS cube which is having 5 partitions. These partitions are processed through a sql server job using SSIS packages. In packages I used SSAS process task to do this.Now problem is, job is running successfully and showing that the step which is having partition process also fine.But data is not updating in the partition. While checking the partition properties, it is not updated with recent date and time.
When I try to manually process the partition, it is getting succeeded and recent data is getting reflected with recent date and time.Package configuration is done in job itself.
I got this error from a sql agent driven cube process yesterday and am wondering where the log of errors is created...
Executed as user: xservername$. <return xmlns="urn:schemas-microsoft-com:xml-analysis"><results xmlns="<root">http://schemas.microsoft.com/analysisservices/2003/xmla-multipleresults"><root
xmlns="urn:schemas-microsoft-com:xml-analysis:empty"><Messages xmlns="urn:schemas-microsoft-com:xml-analysis:exception"><Warning WarningCode="1092354050" Description="Server: Operation completed with 1042 problems
logged." Source="Microsoft SQL Server 2008 R2 Analysis Services" HelpFile="" /></Messages></root></results></return>.
The step failed.if its a property I can see related to the server in ssms, which property as I see lots of stuff with the word log in the property name.
Is it possible to have more than one cube under one SSAS database? For example I have a database "Test" and in this the cube exist is "TestCube", is iit possible to deploy another cube "TestCube2" under the Test databse?
If yes then what is the process to do that, the reason I am asing is there are some common dimensions used n both the cubes and I am not sure what is the best way so that I can use the shared dimension?
I've been working with SSAS for a good few years now but I keep bumping into this problem - my users are trying to build a measure that is based on a calculated attribute and finding it difficult to work out how to write the MDX to do so. Intuitively, they thought a Calculated Member would work, but I don't think a Calculated Member is quite the same thing from my understanding.
So, here's the scenario.
We have a Product Dimension. We have a Measure that is the Number of days the Product took to make, e.g. 5 days. We also have a Product Count measure that counts the number of Products.
The user would like to write a calculated measure that works out the number of products that took <5 days, 5-10 days, 10-15 days etc.It would be easy to write a set of calculated measures for each of these bandings, but the user wants effectively a single dynamic attribute to use in the calculation in order to automatically distribute these values across the columns in their pivot table.
Is this even possible? I was thinking I could build an attribute on the Product Dimension in the ETL to do this quite easily, but the user wants to be able to change the bandings on the fly by changing the MDX for the attribute, rather than go back to the developer every time.
how to achieve the below mentioned in SSAS: P
1 - Set Default values 20 and 80
2 -Set Default value <> 90 or except 90.
I wanted to know the meaning of Granlatiy of Fact with some example.
View 3 Replies View RelatedI need to find the percentile using cube so i am using the below formula :
((n-1) * p /100) -1
n= count of number of array records
p= percentile
I am using below MDX query:
WITH MEMBER [Measures].[PV] AS 25
Member [Measures].[CntCT] as Count(NonEmpty([Tb City].[City Name].&[DC], [Measures].[CPT1]))
Member [Measures].[PVInt25] as Int(((([Measures].[CntCT] - 1)* [Measures].[PV])/100) - 1)
Member [Measures].[PVC] as ([Measures].[CPT1],Order(NonEmpty([Tb City].[City Name].&[DC],[Measures].[CPT1]),
[Measures].[CPT1],ASC).Item([Measures].[PVInt25]))
Select [Measures].[PVC] on columns, {[Tb City].[City Name]} on rows from test;
The line 2:
Member [Measures].[CntCT]
In that i need to find the n count of rows where city is DC (City is my Dimension) in Measures CPT1
But currently it is giving the result 1 instead in actual in my test cube there is the city DC exists with 23 CPT1 rows count.
I tried the below query:
SELECT NON EMPTY {[Tb City 1].[City Name].[City Name].&[DC] }
ON COLUMNS, NON EMPTY { ( [Measures].[Tb Main Count] ) }
ON ROWS FROM [test]
Above query gives me the correct count i.e. 23 but i need to get the result of above query in line 2 of MDX query:
Member [Measures].[CntCT]
I have a requirement where I need to show the maximum value in grand totals but for the dimension members the same measure has to sum.
For ex: lets say I have a measure called Test and this is a base measure. The aggregation type set to this is SUM.
For this same measure the grand totals should not show the sum instead it should show the maximum value of the dimension members which is being analyzed across.
I want to implement population data in sales cube.
Fact table has customer code which is foreign key of Customer master dimension which in turn is linked to census data dimension. Census data dimension have city wise population data having foreign keys of zone and state.
We want to add population data in fact table.
I was trying to update an SSAS database on a test server and got the following error when trying to deploy from Visual Stuido. I get a similar error in SMS. I tried to delete the database before deploying but I get an error when trying to delete. I rebooted the server.
(SQL Server 2005 R2, Windows Server 2008R2.)
Error 1 File system error: The following file is corrupted: Physical file:
?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbDim Age.0.dim5.Dim Age.Dim Age.dstore. Logical file . Errors in the metadata manager. An error occurred when loading the Age dimension, from the file, '?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbDim Age.5.dim.xml'. Errors in the metadata manager. An error occurred when loading the Heidtman DW cube, from the file, '?D:Program FilesMicrosoft SQL ServerMSSQL.2OLAPDataHeidtman Sales Cube.0.dbHeidtman DW.7.cub.xml'. 0 0
how to move the dimension attributes from currency to geography and vice versa(i.e need to change their positions) in SQL Server 2012. i need currency to be placed in top of geography or geography below currency.
View 6 Replies View RelatedIn Analysis services,i have multiple DB's. i need to delete all using XMLA script.
View 3 Replies View RelatedI have a .abf file, which I am attempting to restore. I go to Management Studio and attempt to restore the cube.
However, whenever I attempt to restore the following error message occurs:
"File 'C:/.......' specified in restore command is damaged or is not an AS backup file.
The following error occured:
Access is denied (Microsoft SQL Server 2008 R2 Analysis Services)
How can i deploy an existing cube with a new name on the same server?
View 4 Replies View RelatedI am thinking of a possible design where the cube will never go offline.
Usually when I do some code changes on my cube the cube goes offline and I need to Full Process it again to get it back .
However , in cases where the cube is extremely critical for the business users , it would be great if I can deliver a solution where the cube never goes down.
I'm trying to do a currency conversion with an MDX statement in my Cube SSAS 2012.
Here is my script :
SCOPE( LEAVES([Entity]) );
SCOPE( LEAVES([Time]) );
SCOPE( LEAVES([Currency]));
SCOPE( [Account].[Account].[Total ACCOUNT].members)
THIS = ([Measures].[Value],[Currency].[Currency].[Local])*([Measures].[Value],[Account].[Account].[Fx Rate]);
END SCOPE;
END SCOPE;
END SCOPE;
END SCOPE;
The problem is I want to exclude frome the scope Currency my local Currency in order to make the conversion only if a currency (€,$, £) is selected. I tried the following syntax but it always return a "MDX script is not valid" :
SCOPE( LEAVES([Currency], Except (LEAVES([Currency],[Currency].[Currency].[Local]);SCOPE( [Measures].[Value] , Except ([Currency].[Currency].members,[Currency].[Currency].[Local]);SCOPE( [Measures].[Value] , Except (LEAVES([Currency],[Currency].[Currency].[Local]);SCOPE( LEAVES([Currency] - [Currency].[Currency].[Local]);
How can I connect ssas cube to server. I have no SSAS SERVER INSTANCE...
View 3 Replies View RelatedI have a requirement to show the parent value which is passed and also all the leaf member details in MDX. For example in Adventure works, if I pass Bikes as the value in MDX, the results should display Bikes along with All the child member names as a measure value in SSAS MDX. I only have one hierarchy with Product Category-> Subcategory-> Product.
I am trying to use the following MDX but I am getting all the members. I need to get only Bikes in my report.
WITH MEMBER [Prod_Passed] AS SETTOSTR(AXIS(1))
MEMBER [Prod_Child] AS DESCENDANTS ([Dim Product].[Hierarchy].CURRENTMEMBER,,LEAVES).item(0).NAME
MEMBER [Child_Value] AS ([Dim Product].[Hierarchy].CURRENTMEMBER,[Measures].[Sales Amount])
SELECT [Dim Product].[Hierarchy].[Product Category].&[1] * [Dim Product].[Product Key].[Product Key].MEMBERS ON ROWS,
{[Measures].[Sales Amount],[Prod_Passed],[Prod_Child],[Child_Value]} ON COLUMNS FROM
[AdvWorks]
How to put these calculated measures under the folder "sales line". i want to see it under the drop down...
View 5 Replies View RelatedSQL Server Data Tools within VS 2010 Shell.2012 SASS in Tabular Mode.I've created a Measure and KPI in my fact table. I've created a perspective named "Summary" When selecting the fields and measures for display in the perspective, the measure is available, but not the KPI (target, status, etc.). When Analyzing in Excel with the Summary perspective, the KPI is not available in the field list. When analyzing in Excel with the (default) perspective, the KPI is available.As far as I can tell, there is no way to select a KPI within the perspective window.
View 8 Replies View Related